RESUMEN
Aerogels are highly porous materials with fascinating properties prepared using sol-gel chemistry. Due to their unique physical and chemical properties, aerogels are recognized as potential candidates for diverse applications, including thermal insulation, sensor, environmental remediation, etc. Despite these applications, aerogels are not routinely found in our daily life because they are fragile and have highly limited scale-up productions. It remains extremely challenging to improve the mechanical properties of aerogels without adversely affecting their other properties. To boost the practical applications, it is necessary to develop efficient, low-cost methods to produce aerogels in a sustainable way. This comprehensive review surveys the progress in the development of aerogels and their classification based on the chemical composition of the network. Recent achievements in organic, inorganic, and hybrid materials and their outstanding physical properties are discussed. The major focus of this review lies in approaches that allow tailoring of aerogel properties to meet application-driven requirements. We begin with a brief discussion of the fundamental issues in silica aerogels and then proceed to provide an overview of the synthesis of organic and hybrid aerogels from various precursors. Organic aerogels show promising results with excellent mechanical strength, but there are still several issues that need further exploration. Finally, growing points and perspectives of the aerogel field are summarized.
RESUMEN
We synthesize porous polyHIPE networks with silanol functionalities in the polyHIPE backbone. These silanol functionalities are used for covalent bonding with silica aerogels embedded in the polyHIPE. Covalent bonding between silica and polyHIPE networks are confirmed using Fourier-transform infrared spectroscopy and scanning electron microscopy. Silica aerogels covalently bonded with polyHIPE network show macroporous and mesoporous morphologies and possess excellent properties like high bendability, high elasticity, superhydrophobicity (~160°), low density (~0.128 g/cm3), and low thermal conductivity (~0.045 W/m·K). Oil absorption from water/oil mixtures and recovery of the absorbed oil (by squeezing) from flexible silica-polyHIPE networks is studied. The silica-polyHIPE is shown to absorb crude oil ~16-times its own weight and can be reused multiple times after recovery. Hence, such materials are very important for oil spill cleanup applications from aqueous systems.
RESUMEN
The surface free energy of a solid determines its surface and interfacial behavior in processes like wetting and adhesion which is crucial for silica aerogels in case of organic liquid absorption and transportation of chemicals at nano-scale for biotechnological applications. Here, we have demonstrated that the surface free energy of aerogels can be tuned in wide range from 5.5892 to 0.3073 mJ/m(2) by modifying their surface using TMCS and HMDZ silylating reagents. The alcogels were prepared by two step acid-base catalyzed process where the molar ratio of precursors Tetraethoxysilane (TEOS):Methanol (MeOH):Oxalic acid:NH(4)OH:NH(4)F was kept at optimal value of 1:2.7:0.18×10(-4):0.02:0.22×10(-3), respectively. To modify gel surfaces, TMCS and HMDZ concentration have been varied from 3% to 12% and such alcogels were dried at ambient pressure. It is observed from FTIR for aerogels that increase in concentration of silylating reagent resulted increase in hydrophobicity. This leads to increase in contact angle for water from 123° to 155° but leads to decrease in surface free energy from 5.5892 to 0.3073 mJ/m(2). As there is not direct method, we have used Neumann's equation of state to estimate surface energy of aerogels.
