Analytical performances of food microbiology laboratories - critical analysis of 7 years of proficiency testing results.

AIM: Based on the results of 19 food microbiology proficiency testing (PT) schemes, this study aimed to assess the laboratory performances, to highlight the main sources of unsatisfactory analytical results and to suggest areas of improvement. METHODS AND RESULTS: The 2009-2015 results of REQUASUD and IPH PT, involving a total of 48 laboratories, were analysed. On average, the laboratories failed to detect or enumerate foodborne pathogens in 3·0% of the tests. Thanks to a close collaboration with the PT participants, the causes of outliers could be identified in 74% of the cases. The main causes of erroneous PT results were either pre-analytical (handling of the samples, timing of analysis), analytical (unsuitable methods, confusion of samples, errors in colony counting or confirmation) or postanalytical mistakes (calculation and encoding of results). CONCLUSIONS: PT schemes are a privileged observation post to highlight analytical problems, which would otherwise remain unnoticed. In this perspective, this comprehensive study of PT results provides insight into the sources of systematic errors encountered during the analyses. SIGNIFICANCE AND IMPACT OF THE STUDY: This study draws the attention of the laboratories to the main causes of analytical errors and suggests practical solutions to avoid them, in an educational purpose. The observations support the hypothesis that regular participation to PT, when followed by feed-back and appropriate corrective actions, can play a key role in quality improvement and provide more confidence in the laboratory testing results.

Lytic enzymes as selectivity means for label-free, microfluidic and impedimetric detection of whole-cell bacteria using ALD-Al2O3 passivated microelectrodes.

Point-of-care (PoC) diagnostics for bacterial detection offer tremendous prospects for public health care improvement. However, such tools require the complex combination of the following performances: rapidity, selectivity, sensitivity, miniaturization and affordability. To meet these specifications, this paper presents a new selectivity method involving lysostaphin together with a CMOS-compatible impedance sensor for genus-specific bacterial detection. The method enables the sample matrix to be directly flown on the polydopamine-covered sensor surface without any pre-treatment, and considerably reduces the background noise. Experimental proof-of-concept, explored by simulations and confirmed through a setup combining simultaneous optical and electrical real-time monitoring, illustrates the selective and capacitive detection of Staphylococcus epidermidis in synthetic urine also containing Enterococcus faecium. While providing capabilities for miniaturization and system integration thanks to CMOS compatibility, the sensors show a detection limit of ca. 10(8) (CFU/mL).min in a 1.5 µL microfluidic chamber with an additional setup time of 50 min. The potentials, advantages and limitations of the method are also discussed.

Commutability of food microbiology proficiency testing samples.

AIM: Food microbiology proficiency testing (PT) is a useful tool to assess the analytical performances among laboratories. PT items should be close to routine samples to accurately evaluate the acceptability of the methods. However, most PT providers distribute exclusively artificial samples such as reference materials or irradiated foods. This raises the issue of the suitability of these samples because the equivalence-or 'commutability'-between results obtained on artificial vs. authentic food samples has not been demonstrated. In the clinical field, the use of noncommutable PT samples has led to erroneous evaluation of the performances when different analytical methods were used. This study aimed to provide a first assessment of the commutability of samples distributed in food microbiology PT. METHODS AND RESULTS: REQUASUD and IPH organized 13 food microbiology PTs including 10-28 participants. Three types of PT items were used: genuine food samples, sterile food samples and reference materials. The commutability of the artificial samples (reference material or sterile samples) was assessed by plotting the distribution of the results on natural and artificial PT samples. This comparison highlighted matrix-correlated issues when nonfood matrices, such as reference materials, were used. Artificially inoculated food samples, on the other hand, raised only isolated commutability issues. CONCLUSIONS: In the organization of a PT-scheme, authentic or artificially inoculated food samples are necessary to accurately evaluate the analytical performances. Reference materials, used as PT items because of their convenience, may present commutability issues leading to inaccurate penalizing conclusions for methods that would have provided accurate results on food samples. SIGNIFICANCE AND IMPACT OF THE STUDY: For the first time, the commutability of food microbiology PT samples was investigated. The nature of the samples provided by the organizer turned out to be an important factor because matrix effects can impact on the analytical results.

Small Bacillus cereus ATCC 14579 subpopulations are responsible for cytotoxin K production.

AIMS: Bacillus cereus diarrhoeal food poisoning can be caused by several potential enterotoxins, including the nonhaemolytic enterotoxin (Nhe), haemolysin BL (Hbl) and cytotoxin K (CytK). To get more insights into the CytK expression, a fluorescent reporter strain was created for CytK expression. METHODS: Bacillus cereus ATCC 14579 was used as the reporter strain that contained the cyan fluorescent protein (CFPopt) gene under control of the cytK promoter. Transcription of enterotoxin genes nheB, hblC and cytK was assessed by messenger RNA analysis (RT-qPCR), and their full expression was assessed by immunological protein detection in the case of Nhe and Hbl and fluorescence microscopy in the case of CytK, using the reporter gene CFPopt. RESULTS: Transcription of enterotoxins Nhe, Hbl and CytK showed similar kinetics with a peak during the late exponential growth phase. Toxin expression of the reporter strain was unaltered in comparison with the wild type. However, fluorescence, and thus CytK expression, only occurred in a small (1-2%) portion of the cell population. CONCLUSIONS: These results suggest that a small subpopulation of B. cereus ATCC 14579 is responsible for CytK production in a homogeneous monoculture. SIGNIFICANCE AND IMPACT OF THE STUDY: Future research is warranted to determine whether genetically homogeneous B. cereus populations utilize differential gene expression for other toxins and virulence genes than CytK and whether this also applies to other B. cereus strains. If so, differential expression of toxin genes could be used by these bacteria to increase the fitness and survival chances of their population by diversification and specialization into different subpopulations.

Characterization of the survival ability of Cupriavidus metallidurans and Ralstonia pickettii from space-related environments.

Four Cupriavidus metallidurans and eight Ralstonia pickettii isolates from the space industry and the International Space Station (ISS) were characterized in detail. Nine of the 12 isolates were able to form a biofilm on plastics and all were resistant to several antibiotics. R. pickettii isolates from the surface of the Mars Orbiter prior to flight were 2.5 times more resistant to UV-C(254nm) radiation compared to the R. pickettii type strain. All isolates showed moderate to high tolerance against at least seven different metal ions. They were tolerant to medium to high silver concentrations (0.5-4 µM), which are higher than the ionic silver disinfectant concentrations measured regularly in the drinking water aboard the ISS. Furthermore, all isolates survived a 23-month exposure to 2 µM AgNO(3) in drinking water. These resistance properties are putatively encoded by their endogenous megaplasmids. This study demonstrated that extreme resistance is not required to withstand the disinfection and sterilization procedures implemented in the ISS and space industry. All isolates acquired moderate to high tolerance against several stressors and can grow in oligotrophic conditions, enabling them to persist in these environments.

Development and validation of stable reference materials for food microbiology using Bacillus cereus and Clostridium perfringens spores.

AIMS: To develop a new type of microbiological Reference Materials (RMs), displaying long-term stability at room temperature. The purpose was to produce and validate two batches of RMs for the enumeration of Bacillus cereus and Clostridium perfringens. METHODS AND RESULTS: The RMs were based on spores of B. cereus and Cl. perfringens, adsorbed on calcium carbonate pellets. Two batches of 1000 units were manufactured and validated in compliance with ISO guide 35. After verification of their homogeneity, the stability of the 'RM-B. cereus' and 'RM-Cl. perfringens' batches was proven during at least 36 and 9 months, respectively, at room temperature. The validation study was completed by international collaborative trial involving 12 laboratories, allowing the validation of the assigned values. CONCLUSIONS: The methodology developed in this work enabled to produce easy-to-handle and cost-effective RMs, displaying an unprecedented stability at room temperature, a good homogeneity and a precise and validated assigned value. SIGNIFICANCE AND IMPACT OF THE STUDY: This study revealed new paths for the development of stable microbiological RMs. Overcoming the intrinsic instability of the living cells makes it possible to produce valuable tools for the quality assurance of microbiology laboratories.

Differential transfer dynamics of pAW63 plasmid among members of the Bacillus cereus group in food microcosms.

AIM: To assess the dynamics of plasmid transfer between Bacillus thuringiensis and B. cereus in various food microcosms using the B. thuringiensis pAW63 and Staphylococcus aureus pUB110 plasmids as models. METHODS AND RESULTS: The conjugative behaviour of pAW63, which resembles the B. anthracis virulence plasmid pXO2, and the mobilization of pUB110 were investigated using kinetics studies performed in reference LB (lysogeny broth) medium, full-cream and skimmed milks, soya milk and rice milk. Transfers of pAW63 and pUB110 were found to occur in the five tested media, with higher frequencies observed in food matrices, most notably in full-cream milk, skimmed milk and soya milk, where the mean transfer frequencies reached 10(-3) transconjugants per recipient cell. The most notable observations were that the higher transfer frequencies obtained in foodstuffs compared to those observed in LB were because of an earlier onset of conjugation in combination with a higher transfer rate and/or a longer mating period. CONCLUSION: These results indicate that not only the potential for plasmid transfer but also the overall timing of conjugation is affected by each of these food matrices. SIGNIFICANCE AND IMPACT OF THE STUDY: This new approach to study plasmid transfer provides insights for a better understanding of conjugation in food microcosms from both animal and vegetable origins among members of the B. cereus group.

Endophytic fungi from leaves of Centella asiatica: occurrence and potential interactions within leaves.

Fungal endophytes were isolated from leaves of Centella asiatica (Apiaceae) collected at Mangoro (middle eastern region of Madagascar, 200 km from Antananarivo). Forty- five different taxa were recovered. The overall foliar colonization rate was 78%. The most common endophytes were the non-sporulating species 1 (isolation frequency IF 19.2%) followed by Colletotrichum sp.1 (IF 13.2%), Guignardia sp. (IF 8.5%), Glomerella sp. (IF 7.7%), an unidentified ascomycete (IF 7.2%), the non-sporulating species 2 (IF 3.7%) and Phialophora sp. (IF 3.5%). Using sequences of the ribosomal DNA internal transcribed spacer (ITS) regions, major endophytes (IF > 7%) were identified as xylariaceous taxa or as Colletotrichum higginsianum, Guignardia mangiferae and Glomerella cingulata. Results from in vitro fungal disk experiments showed a strong inhibitory activity of the xylariaceous non-sporulating species 1 against G. mangiferae and C. higginsianum and of C. higginsianum against G. mangiferae. This can be explained by antagonism between dominant taxa.

ISfinder: the reference centre for bacterial insertion sequences.

ISfinder (www-is.biotoul.fr) is a dedicated database for bacterial insertion sequences (ISs). It has superseded the Stanford reference center. One of its functions is to assign IS names and to provide a focal point for a coherent nomenclature. It is also the repository for ISs. Each new IS is indexed together with information such as its DNA sequence and open reading frames or potential coding sequences, the sequence of the ends of the element and target sites, its origin and distribution together with a bibliography where available. Another objective is to continuously monitor ISs to provide updated comprehensive groupings or families and to provide some insight into their phylogenies. The site also contains extensive background information on ISs and transposons in general. Online tools are gradually being added. At present an online Blast facility against the entire bank is available. But additional features will include alignment capability, PsiBLAST and HMM profiles. ISfinder also includes a section on bacterial genomes and is involved in annotating the IS content of these genomes. Finally, this database is currently recommended by several microbiology journals for registration of new IS elements before their publication.

The hidden lifestyles of Bacillus cereus and relatives.

Bacillus cereus sensu lato, the species group comprising Bacillus anthracis, Bacillus thuringiensis and B. cereus (sensu stricto), has previously been scrutinized regarding interspecies genetic correlation and pathogenic characteristics. So far, little attention has been paid to analysing the biological and ecological properties of the three species in their natural environments. In this review, we describe the B. cereus sensu lato living in a world on its own; all B. cereus sensu lato can grow saprophytically under nutrient-rich conditions, which are only occasionally found in the environment, except where nutrients are actively collected. As such, members of the B. cereus group have recently been discovered as common inhabitants of the invertebrate gut. We speculate that all members disclose symbiotic relationships with appropriate invertebrate hosts and only occasionally enter a pathogenic life cycle in which the individual species infects suitable hosts and multiplies almost unrestrained.

Particular biochemical profiles for enterohemorrhagic Escherichia coli O157:H7 isolates on the ID 32E system.

The ability of the ID 32E system to identify and discriminate 74 Escherichia coli O157 isolates among 106 E. coli non-O157 isolates was evaluated. The results showed atypical biochemical reactions but accurate identification at the species level and no unique biochemical profile numbers for E. coli O157, although these numbers were distinct from those of other serotypes.

Sequence and organization of pXO1, the large Bacillus anthracis plasmid harboring the anthrax toxin genes.

The Bacillus anthracis Sterne plasmid pXO1 was sequenced by random, "shotgun" cloning. A circular sequence of 181,654 bp was generated. One hundred forty-three open reading frames (ORFs) were predicted using GeneMark and GeneMark.hmm, comprising only 61% (110,817 bp) of the pXO1 DNA sequence. The overall guanine-plus-cytosine content of the plasmid is 32.5%. The most recognizable feature of the plasmid is a "pathogenicity island," defined by a 44.8-kb region that is bordered by inverted IS1627 elements at each end. This region contains the three toxin genes (cya, lef, and pagA), regulatory elements controlling the toxin genes, three germination response genes, and 19 additional ORFs. Nearly 70% of the ORFs on pXO1 do not have significant similarity to sequences available in open databases. Absent from the pXO1 sequence are homologs to genes that are typically required to drive theta replication and to maintain stability of large plasmids in Bacillus spp. Among the ORFs with a high degree of similarity to known sequences are a collection of putative transposases, resolvases, and integrases, suggesting an evolution involving lateral movement of DNA among species. Among the remaining ORFs, there are three sequences that may encode enzymes responsible for the synthesis of a polysaccharide capsule usually associated with serotype-specific virulent streptococci.

MIC231, a naturally occurring mobile insertion cassette from Bacillus cereus.

Recent dissection of numerous plasmids and transposable elements has given more credence to the modular organization of these genetic and genomic entities. Although many variations on each theme exist, the number of basic functional cassettes is thought to be relatively limited. In this paper, a novel type of mobile cassette is described. A naturally occurring assemblage consisting of two left IS231 ends flanking a D-stereospecific endopeptidase (adp) gene was found in several natural isolates of Bacillus cereus. This 1.9 kb genetic entity was shown to transpose in the presence of IS231A transposase, not only in Escherichia coli but also in Bacillus. The acronym MIC231 is proposed for this mobile insertion cassette trans-activated (teletransposed) by IS231. Using (D-Phe)4 tetrapeptide as substrate, the endopeptidase activity of the MIC231 adp gene could be demonstrated in E. coli and B. subtilis. Interestingly, this D-stereospecific endopeptidase activity was not limited to the original B. cereus isolates but was also detected in all but one of the 69 B. cereus sensu lato strains tested, indicating its important, yet dispensable, biological function. However, inactivation of the MIC231 adp gene in two B. cereus strains did not result in any detectable variation of their activity on (D-Phe)4, suggesting the presence of other distantly related adp gene(s). Thus, although the exact role of MIC231 adp remains elusive, its presence inside a mobile cassette represents the archetype of a novel insertion sequence modular organization.

Replication mechanism and sequence analysis of the replicon of pAW63, a conjugative plasmid from Bacillus thuringiensis.

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.

IS elements as constituents of bacterial genomes.

We provide here an overview of our present understanding of the distribution of different insertion sequences (ISs) within bacterial genomes (both chromosomes and plasmids). This is at present fragmentary and a significant effort is needed in the analysis of the increasing number of genomes whose sequence has been determined. We also consider some of the properties of ISs which are important in their role of assembling, reassorting, and transmitting groups of genes.

Subdivision of the Escherichia coli K-12 genome for sequencing: manipulation and DNA sequence of transposable elements introducing unique restriction sites.

A transposon-based method of introducing unique restriction sites was used for subdivision of the Escherichia coli genome into a contiguous series of large non-overlapping segments spanning 2.5Mb. The segments, sizes ranging from 150 to 250kb, were isolated from the chromosome using the inserted restriction sites and shotgun cloned into an M13 vector for DNA sequencing. These shotgun sizes proved easily manageable, allowing the genomic sequence of E. coli to be completed more efficiently and rapidly than was possible by previously available methods. The 9bp duplication generated during transposition was used as a tag for accurate splicing of the segments; no further sequence redundancy at the junction sites was needed. The system is applicable to larger genomes even if they are not already well-characterized. We present the technology for segment sequencing, results of applying this method to E. coli, and the sequences of the transposon cassettes.

IS231A transposition: conservative versus replicative pathway.

This paper describes a novel approach, based on suicide transposition, to addressing the question of whether IS231A can give rise to cointegrate molecules through replicative transposition, even at a very low frequency. Comparative analysis was carried out with IS 10, another member of the same IS4 family. The results indicate that transposition of both elements is exclusively conservative.

Insertion sequences.

Insertion sequences (ISs) constitute an important component of most bacterial genomes. Over 500 individual ISs have been described in the literature to date, and many more are being discovered in the ongoing prokaryotic and eukaryotic genome-sequencing projects. The last 10 years have also seen some striking advances in our understanding of the transposition process itself. Not least of these has been the development of various in vitro transposition systems for both prokaryotic and eukaryotic elements and, for several of these, a detailed understanding of the transposition process at the chemical level. This review presents a general overview of the organization and function of insertion sequences of eubacterial, archaebacterial, and eukaryotic origins with particular emphasis on bacterial elements and on different aspects of the transposition mechanism. It also attempts to provide a framework for classification of these elements by assigning them to various families or groups. A total of 443 members of the collection have been grouped in 17 families based on combinations of the following criteria: (i) similarities in genetic organization (arrangement of open reading frames); (ii) marked identities or similarities in the enzymes which mediate the transposition reactions, the recombinases/transposases (Tpases); (iii) similar features of their ends (terminal IRs); and (iv) fate of the nucleotide sequence of their target sites (generation of a direct target duplication of determined length). A brief description of the mechanism(s) involved in the mobility of individual ISs in each family and of the structure-function relationships of the individual Tpases is included where available.