RESUMEN
The strain designated NCCP-602T was isolated from tannery effluent, and displayed aerobic, gram-positive, rod-shaped cells that were characterized by oxidase negative, catalase positive, and non-motile features. The most favourable growth conditions were observed at a temperature of 30°C, pH 7.0, and NaCl concentration of 1% (w/v). It tolerated heavy metals at high concentrations of chromium (3600 ppm), copper (3300 ppm), cadmium (3000 ppm), arsenic (1200 ppm) and lead (1500 ppm). The results of phylogenetic analysis, derived from sequences of the 16S rRNA gene, indicated the position of strain NCCP-602T within genus Brevibacterium and showed that it was closely related to Brevibacterium ammoniilyticum JCM 17537T. Strain NCCP-602 T formed a robust branch that was clearly separate from closely related taxa. A comparison of 16S rRNA gene sequence similarity and dDDH values between the closely related type strains and strain NCCP-602T provided additional evidence supporting the classification of strain NCCP-602T as a distinct novel genospecies. The polar lipid profile included diphosphatidylglycerol, glycolipid, phospholipids and amino lipids. MK-7 and MK-8 were found as the respiratory quinones, while anteiso-C15:0, iso-C15:0, iso-C16:0, iso-C17:0, and anteiso-C17:0 were identified as the predominant cellular fatty acids (> 10%). Considering the convergence of phylogenetic, phenotypic, chemotaxonomic, and genotypic traits, it is suggested that strain NCCP-602 T be classified as a distinct species Brevibacterium metallidurans sp. nov. within genus Brevibacterium with type strain NCCP-602T (JCM 18882T = CGMCC1.62055T).
Asunto(s)
Brevibacterium , Ácidos Grasos , Metales Pesados , Filogenia , ARN Ribosómico 16S , Brevibacterium/genética , Brevibacterium/clasificación , Brevibacterium/aislamiento & purificación , Brevibacterium/metabolismo , Brevibacterium/fisiología , ARN Ribosómico 16S/genética , Metales Pesados/metabolismo , Pakistán , Ácidos Grasos/análisis , ADN Bacteriano/genética , Técnicas de Tipificación Bacteriana , Composición de Base , Análisis de Secuencia de ADN , Fosfolípidos/análisis , Curtiembre , GenómicaRESUMEN
This novel research addresses the critical need for sustainable and efficient materials, aiming to enhance the optical and thermoelectric properties of Aluminum doped Zinc Oxide (Al-doped ZnO) on cellulose fabric for diverse applications. At first stage, Cellulosic fabric of Al-doped ZnO were experimentally studied in detail with respect to varying levels of annealing temperature. Structural analysis unveiled structural evolution in hexagonal crystal formations with a reduction in particle size up to 27.5 % on average, with increased temperature. Further, Raman spectroscopy revealed the doping effects on the vibrational modes of ZnO, potentially due to alterations in lattice structure. The ZnO optical modes are found as E2 (low) = 110 cm-1 with observed phonon frequency in the Raman spectra of ZnO at A1 (TO) = 364 cm-1. Fourier transform infrared spectroscopy (FTIR) revealed the presence of characteristic stretching of developed material. Furthermore, the optical characters revealed a decrement of 43.22 % in bandgap values with increasing annealing temperature. The analysis of thermoelectric attributes documented that the prominent sample annealed at 300°C exhibited the maximum Seebeck coefficient and power factor of 2.1 × 10-3 µV/oC and 5.8 × 10-21 Wm-1 K-2, respectively. At second stage the optical characteristics of experimentally optimized sample were rigorously studied through the application of Material Studio software, while varying the doping ratio.
Asunto(s)
Celulosa , Textiles , Óxido de Zinc , Celulosa/química , Óxido de Zinc/química , Temperatura , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Aluminio/químicaRESUMEN
Genus Thermus is the main focus of researcher among the thermophiles. Members of this genus are the inhabitants of both natural and artificial thermal environments. We performed phylogenomic analyses and comparative genomic studies to unravel the genomic diversity among the strains belonging to the genus Thermus in geographically different thermal springs. Sixteen Thermus strains were isolated and sequenced from hot springs, Qucai hot springs in Tibet and Tengchong hot springs in Yunnan, China. 16S rRNA gene based phylogeny and phylogenomic analyses based on concatenated set of 971 Orthologous Protein Families (supermatrix and gene content methods) revealed a mixed distribution of the Thermus strains. Whole genome based phylogenetic analysis showed, all 16 Thermus strains belong to five species; Thermus oshimai (YIM QC-2-109, YIM 1640, YIM 1627, 77359, 77923, 77838), Thermus antranikianii (YIM 73052, 77412, 77311, 71206), Thermus brokianus (YIM 73518, 71318, 72351), Thermus hydrothermalis (YIM 730264 and 77927) and one potential novel species 77420 forming clade with Thermus thalpophilus SYSU G00506T. Although the genomes of different strains of Thermus of same species were highly similar in their metabolic pathways, but subtle differences were found. CRISPR loci were detected through genome-wide screening, which showed that Thermus isolates from two different thermal locations had well developed defense system against viruses and adopt similar strategy for survival. Additionally, comparative genome analysis screened competence loci across all the Thermus genomes which could be helpful to acquire DNA from environment. In the present study it was found that Thermus isolates use two mechanism of incomplete denitrification pathway, some Thermus strains produces nitric oxide while others nitrious oxide (dinitrogen oxide), which show the heterotrophic lifestyle of Thermus genus. All isolated organisms encoded complete pathways for glycolysis, tricarboxylic acid and pentose phosphate. Calvin Benson Bassham cycle genes were identified in genomes of T. oshimai and T. antranikianii strains, while genomes of all T. brokianus strains and organism 77420 were lacking. Arsenic, cadmium and cobalt-zinc-cadmium resistant genes were detected in genomes of all sequenced Thermus strains. Strains 77,420, 77,311, 73,518, 77,412 and 72,351 genomes were found harboring genes for siderophores production. Sox gene clusters were identified in all sequenced genomes, except strain YIM 730264, suggesting a mode of chemolithotrophy. Through the comparative genomic analysis, we also identified 77420 as the genome type species and its validity as novel organism was confirmed by whole genome sequences comparison. Although isolate 77420 had 99.0% 16S rRNA gene sequence similarity with T. thalpophilus SYSU G00506T but based on ANI 95.86% (Jspecies) and digital DDH 68.80% (GGDC) values differentiate it as a potential novel species. Similarly, in the phylogenomic tree, the novel isolate 77,420 forming a separate branch with their closest reference type strain T. thalpophilus SYSU G00506T.
Asunto(s)
Genoma Bacteriano , Genómica , Manantiales de Aguas Termales , Filogenia , ARN Ribosómico 16S , Thermus , Thermus/genética , Thermus/clasificación , Thermus/aislamiento & purificación , Manantiales de Aguas Termales/microbiología , ARN Ribosómico 16S/genética , Tibet , China , ADN Bacteriano/genética , Análisis de Secuencia de ADNRESUMEN
The innovative design of thin, multiphase flexible composite systems with good mechanical properties, low density and improved EMI shielding properties at low filler content has become a key area of research. In this work, we report the low temperature synthesis of three-dimensional ternary composites (PANI/NFO@CNTs and PANI/NFO@RGO) by oxidative chemical polymerization of aniline in the presence of two different binary composites, viz. NFO@CNTs and NFO@RGO. Enhanced impedance matching is achieved by varying the ratio of the carbon allotropes (CNTs and RGO) to the ferrite component. The synthesis of NFO, PANI/NFO@CNTs and PANI/NFO@RGO is validated by XRD and FTIR spectroscopy. Field emission scanning electron microscopy (FE-SEM) confirmed the synthesis of core-shell structures of PANI/NFO@CNTs and PANI/NFO@RGO, where the binary composites (NFO@CNTs and NFO@RGO) serve as a core onto which a tubular PANI layer was coated. Shielding effectiveness of 22.36 dB (99.41% attenuation) is exhibited by the ternary composite PANI/NFO@CNTs (8 : 1), while for PANI/NFO@RGO (20 : 1) a total shielding effectiveness of 31 dB equivalent to 99.92% attenuation was observed at a thickness of 2 mm. The ternary composite PANI/NFO@RGO (20 : 1) 4 mm showed a maximum SET of 43 dB corresponding to 99.996% attenuation of incident EM waves. The enhanced EMI shielding properties of the synthesized ternary composite systems are accredited to good impedance matching, effective dielectric and magnetic loss mechanisms and good conductivity, which facilitate multiple reflections and scattering of incident radiation.
RESUMEN
The existing image search engines allow web users to explore images from the grids. The traditional interaction is linear and lookup-based. Notably, scanning web search results is horizontal-vertical and cannot support in-depth browsing. This research emphasizes the significance of a multidimensional exploration scheme over traditional grid layouts in visually exploring web image search results. This research aims to antecedent the implications of visualization and related in-depth browsing via a multidimensional cubic graph representation over a search engine result page (SERP). Furthermore, this research uncovers usability issues in the traditional grid and 3-dimensional web image search space. We provide multidimensional cubic visualization and nonlinear in-depth browsing of web image search results. The proposed approach employs textual annotations and descriptions to represent results in cubic graphs that further support in-depth browsing via a search user interface (SUI) design. It allows nonlinear navigation in web image search results and enables exploration, browsing, visualization, previewing/viewing, and accessing images in a nonlinear, interactive, and usable way. The usability tests and detailed statistical significance analysis confirm the efficacy of cubic presentation over grid layouts. The investigation reveals improvement in overall user satisfaction, screen design, information & terminology, and system capability in exploring web image search results.
RESUMEN
Hepatitis is one of the common liver diseases, imposing a heavy health burden worldwide. Acute hepatitis may develop into chronic hepatitis, progressing to cirrhosis and hepatocellular carcinoma. In the present study, the expression of miRNAs was quantified by real-time PCR, such as miRNA-182, 122, 21, 150, 199, and 222. Along with the control group, HCV was divided into chronic, cirrhosis, and HCC groups. The treated group was also included after the successful treatment of HCV. Biochemical parameters, such as ALT, AST, ALP, bilirubin, viral load, and AFP (HCC), were also evaluated in all of the study groups. We compared the control and diseased groups; these parameters showed significant results (p = 0.000). The viral load was high in HCV but was not detected after treatment. miRNA-182 and miRNA-21 were overexpressed with disease progression, while the expression of miRNA-122 and miRNA-199 was increased compared with the control, but decreased in the cirrhosis stage compared with chronic and HCC. The expression of miRNA-150 was increased in all of the diseased groups compared with the control, but decreased compared with the chronic group. We compared the chronic and treated groups and then all of these miRNAs were down-regulated after treatment. These microRNAs could be used as potential biomarkers for diagnosing different stages of HCV.
Asunto(s)
Carcinoma Hepatocelular , Hepatitis C , Neoplasias Hepáticas , MicroARNs , Humanos , Carcinoma Hepatocelular/patología , Neoplasias Hepáticas/patología , Pakistán , Cirrosis HepáticaRESUMEN
BACKGROUND: Dental composites are aesthetic direct restorative material. However, the effect of mouthwashes on the durability of the material is controversial. This study evaluated and compared the influence of mouthwash composition on the surface hardness of nanofilled (Z350XT) and microhybrid (P60) resin composites. METHODS: Comparative in-vitro study was conducted over 6 months at Multan Medical & Dental College. Sixty-four disc-shape specimens of each {nanofilled (Z350XT) and microhybrid (P60)} resin composite were prepared and stored in distilled water at 37°C for 24 hours. The baseline microhardness reading (To) was recorded by Vickers micro-hardness tester. Samples were then randomly divided into four groups (n=16) and stored in Listerine Cool Mint, Colgate Plax, Clinica and distilled water (control). The hardness test was repeated after 12 hours and 24 hours of storage. RESULTS: Nanocomposite (Z350XT) had statistically (p<0.01) higher surface hardness. A significant reduction (p≤0.05) in microhardness was observed after immersion of samples in mouthwashes. The reduction in surface hardness was dependent on the immersion time and composition of mouthwashes. Listerine Cool Mint (alcohol-based mouthwash) had greatest degradation effect. CONCLUSIONS: Mouth rinses negatively impacted the surface microhardness of the tested resin-based materials. Alcohol-based mouthwashes had greater potential for reducing microhardness. Microhybrid composite appears to be a more suitable material for restoring teeth in patients accustomed to using regular mouthwashes.
Asunto(s)
Antisépticos Bucales , Nanocompuestos , Humanos , Resinas Compuestas , Ensayo de Materiales , Boca , Propiedades de Superficie , AguaRESUMEN
Abstract Objective: To compare porcelain and metal repair done with both nanocomposite and conventional composite. Material and Methods: A total of 30 cylinders were fabricated from Porcelain (I), Porcelain fused to metal (II), and metal (III) substrate each. Control group (A) was bonded with conventional micro-hybrid composite and experimental group (B) was bonded with nanocomposite in a 2 mm thickness. All specimens were thermocycled and stored in distilled water at 37 °C for 7 days. A universal testing machine was used to measure the Shear bond strength (SBS). The difference between bond strengths of the groups was compared using an independent t-test. Results: In all three groups, the SBS was higher in the experimental group as compared to the control group. The use of nanocomposite of metal alloy presented maximum shear bond strength, followed by samples of porcelain fused to metal and finally porcelain, showing the lowest values of SBS. Conclusion: Porcelain and alloys bonded with nanocomposite exhibit enhanced adhesiveness as well as aesthetic and mechanical properties. This subsequently would translate into providing higher clinical serviceability and durability and hence a cost-effective and accessible repair option for human welfare (AU).
Asunto(s)
Resistencia al Corte , Porcelana Dental , Nanoestructuras/química , Nanocompuestos/química , Análisis de Varianza , Aleaciones DentalesRESUMEN
Hepatitis C virus (HCV) is a heterogenetic infectious agent that affects a huge proportion of population around the globe. Diverse distribution of multiple subtypes of HCV makes it mandatory and remarkably imperative to understand the genotypic distribution in target population. It could serve as an indictive guideline for the improvement of diagnostic methodologies, and development of effective therapies against this viral infection, in order to improve the infected patients' quality of life. This study included HCV infected patients presented to the diagnostic facility of the Centre for Applied Molecular Biology, University of Punjab, Lahore, between 2016 and 2019. During the 4 years of study, samples were collected from 4177 subjects. Our data revealed no significant differences regarding the prevalence of various genotypes between genders in the adult population. Genotyping was carried out by following the Ohno protocol. The obtained results shown that genotype 3a is the most frequent genotype and accounts for 66.29% of cases. Among other genotypes, 1a is 2.11%, 1b is 0.07%, 3b is 1.89%, 5a is 0.02%, while genome of 28.23% patients was untypable; 1.22% of the samples were non-detectable as viremic. An important concern is that this untypable genome in HCV infected patients may indicate possible mutation of HCV.
Asunto(s)
Genotipo , Hepacivirus/genética , Hepatitis C/epidemiología , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Niño , Preescolar , Femenino , Hepatitis C/virología , Humanos , Lactante , Recién Nacido , Masculino , Persona de Mediana Edad , Pakistán/epidemiología , Prevalencia , Adulto JovenRESUMEN
Aminodextran (AMD) coated magnetic cobalt ferrite nanoparticles are synthesized via electrostatic adsorption of aminodextran onto magnetic nanoparticles and their potential theranostic application is evaluated. The uncoated and aminodextran-coated nanoparticles are characterized to determine their hydrodynamic size, morphology, chemical composition, zeta potential and magnetization. The aminodextran containing cobalt ferrite nanoparticles of nanometer size are positively charged in the pH range from 3 to 9 and exhibit saturation magnetization of 50 emu/g. The magnetic resonance imaging (MRI) indicates capability for diagnostics and a reduction in intensity with an increase in nanoparticle amount. The hyperthermia capability of the prepared particles shows their potential to generate suitable local heat for therapeutic purposes. There is a rise of 7 °C and 9 °C at 327 kHz and 981 kHz respectively and specific absorption rates (SAR) of aminodextran-coated nanoparticles are calculated to be 259 W/g and 518 W/g at the given frequencies larger than uncoated nanoparticles (0.02 W/g). The development of novel aminodextran coated magnetic cobalt ferrite nanoparticles has significant potential to enable and improve personalized therapy regimens, targeted cancer therapies and ultimately to overcome the prevalence of nonessential and overdosing of healthy tissues and organs.
RESUMEN
Gadolinium silicide (Gd5Si4) nanoparticles are an interesting class of materials due to their high magnetization, low Curie temperature, low toxicity in biological environments and their multifunctional properties. We report the magnetic and magnetothermal properties of gadolinium silicide (Gd5Si4) nanoparticles prepared by surfactant-assisted ball milling of arc melted bulk ingots of the compound. Using different milling times and speeds, a wide range of crystallite sizes (13-43 nm) could be produced and a reduction in Curie temperature (T C) from 340 K to 317 K was achieved, making these nanoparticles suitable for self-controlled magnetic hyperthermia applications. The magnetothermal effect was measured in applied AC magnetic fields of amplitude 164-239 Oe and frequencies 163-519 kHz. All particles showed magnetic heating with a strong dependence of the specific absorption rate (SAR) on the average crystallite size. The highest SAR of 3.7 W g-1 was measured for 43 nm sized nanoparticles of Gd5Si4. The high SAR and low T C, (within the therapeutic range for magnetothermal therapy) makes the Gd5Si4 behave like self-regulating heat switches that would be suitable for self-controlled magnetic hyperthermia applications after biocompatibility and cytotoxicity tests.
RESUMEN
The present work reports the distribution of pollutants in the Madrid city and province from 22 monitoring stations during 2010 to 2017. Statistical tools were used to interpret and model air pollution data. The data include the annual average concentrations of nitrogen oxides, ozone, and particulate matter (PM10), collected in Madrid and its suburbs, which is one of the largest metropolitan places in Europe, and its air quality has not been studied sufficiently. A mapping of the distribution of these pollutants was done, in order to reveal the relationship between them and also with the demography of the region. The multivariate analysis employing correlation analysis, principal component analysis (PCA), and cluster analysis (CA) resulted in establishing a correlation between different pollutants. The results obtained allowed classification of different monitoring stations on the basis of each of the four pollutants, revealing information about their sources and mechanisms, visualizing their spatial distribution, and monitoring their levels according to the average annual limits established in the legislation. The elaboration of contour maps by the geostatistical method, ordinary kriging, also supported the interpretation derived from the multivariate analysis demonstrating the levels of NO2 exceeding the annual limit in the centre, south, and east of the Madrid province.
RESUMEN
The creation of new rapid prototyping techniques, low cost 3D printers as well as the creation of new software for these techniques have allowed the creation of 3D models of bones making their application possible in the field of teaching anatomy in the faculties of Health Sciences. The 3D model of cranium created in the present work, at full scale, present accurate reliefs and anatomical details that are easily identifiable by undergraduate students in their use for the study of human anatomy. In this article, the process of scanning the skull and the subsequent treatment of these images with specific software until the generation of 3D model using 3D printer has been reported.
Asunto(s)
Cráneo , Humanos , Modelos Anatómicos , Impresión Tridimensional , Programas InformáticosRESUMEN
Aminodextran (AMD) polymer was prepared via chemical grafting of hexamethylenediamine on oxidized dextran. Magnetic latex particles were successfully obtained by adsorption of positively charged AMD on negatively charged submicron magnetic emulsion. The adsorbed amount was found to be ranged from 20 to 1280mg of AMD per gram of dried magnetic dispersion. The AMD-coated magnetic emulsions were characterized by positive zeta potential in the pH range from 3 to 9 compared to bare seed magnetic emulsion. All the samples showed to be superparamagnetic property, even after the adsorption of the polymer. The developed magnetic submicron particles exhibited good potential for in vivo biomedical diagnosis applications as demonstrated by their higher T2 contrast-ability compared to Gd in magnetic resonance imaging (MRI) and hyperthermia.
Asunto(s)
Emulsiones/química , Polímeros/química , Medios de Contraste/química , Compuestos Férricos/química , Hipertermia Inducida , Imagen por Resonancia Magnética , Nanomedicina TeranósticaRESUMEN
Hepatitis C virus (HCV) is one of the major viruses affecting the world today. It is a highly variable virus, having a rapid reproduction and evolution rate. The variability of genomes is due to hasty replication catalyzed by nonstructural protein 5B (NS5B) which is also a potential target site for the development of anti-HCV agents. Recently, the US Food and Drug Administration approved sofosbuvir as a novel oral NS5B inhibitor for the treatment of HCV. Unfortunately, it is much highlighted for its pricing issues. Hence, there is an urgent need to scrutinize alternate therapies against HCV that are available at affordable price and do not have associated side effects. Such a need is crucial especially in underdeveloped countries. The search for various new bioactive compounds from plants is a key part of pharmaceutical research. In the current study, we applied a pharmacoinformatics-based approach for the identification of active plant-derived compounds against NS5B. The results were compared to docking results of sofosbuvir. The lead compounds with high-binding ligands were further analyzed for pharmacokinetic and pharmacodynamic parameters based on in silico absorption, distribution, metabolism, excretion, and toxicity (ADMET) profile. The results showed the potential alternative lead compounds that can be developed into commercial drugs having high binding energy and promising ADMET properties.
Asunto(s)
Antivirales/farmacología , Hepacivirus/efectos de los fármacos , Informática Médica , Proteínas no Estructurales Virales/antagonistas & inhibidores , Antivirales/química , Ligandos , Simulación del Acoplamiento MolecularRESUMEN
This 3 × 3 factorial study assessed pyrethroids, carbamates and neonicotenoids groups of pesticides in replicated samples of three fish species from low (S1, reference), medium (S2) and heavy (S3) polluted sites receiving agricultural run-offs around the Indus River. Water and sediment samples from the same sites were also analysed for these pesticides by using high-performance liquid chromatography. Out of nine investigated pesticides, only three pesticides (deltamethrin, carbofuran and cypermethrin) were detected in fish and sediment samples. Deltamethrin in Cyprinus carpio ranged from 0.490 to 0.839 µg/g, mostly exceeding 0.5 µg/g as the maximum residual limit suggested by FAO-WHO, whereas it ranged from 0.214 to 0.318 µg/g in the sampled sediments. The carbofuran concentrations were 0.0425-0.066 and 0.613-0.946 µg/g in Labeo rohita and Channa marulius muscles respectively and 0.069-0.081 µg/g in the corresponding sediment samples. These values were either higher or lower than the maximum limit (0.1 µg/g) as suggested by FAO-WHO. Conversely, the cypermethrin concentration ranged from 0.141 to 0.174 in Ch. marulius and 0.183-0.197 µg/g in sediments which were both below the FAO-WHO maximum limit of 2 µg/g. No pesticide residues were detected in water from these sampling sites. Most selected physicochemical variables were within the acceptable range of World Health Organization for the water quality for aquatic life. The detected pesticide contents were mostly higher in fish muscles from heavily polluted sites. This is worrying because these pesticides may pose health risks for the fish and people of the study area. However, a preliminary risk assessment indicated that the calculated daily intake of detected pesticides by people consuming fish from the Indus River was low and did not present an immediate risk to the fish-consuming people. This study may be used as a benchmark to determine the safety of fish meat in order to develop intervention strategies to maintain the water quality and to protect the health of fish and fish-consuming people.
Asunto(s)
Carbamatos/análisis , Monitoreo del Ambiente , Peces/metabolismo , Sedimentos Geológicos/química , Piretrinas/análisis , Ríos/química , Contaminantes Químicos del Agua/análisis , Animales , Carbamatos/metabolismo , Carpas/metabolismo , Cyprinidae/metabolismo , Nitrilos , Perciformes/metabolismo , Residuos de Plaguicidas/análisis , Residuos de Plaguicidas/metabolismo , Plaguicidas/análisis , Plaguicidas/metabolismo , Piretrinas/metabolismo , Contaminantes Químicos del Agua/metabolismoRESUMEN
We present the synthesis of Mn doped Zn(2)SiO(4) dense nanowire bundles using the VLS mode of growth with unusual optical and magnetic properties. The synthesized Zn(2)SiO(4) nanowires were identified with two phases, α-Zn(2)SiO(4) as the major phase and ß-Zn(2)SiO(4) as the minor phase. XPS studies confirmed that Zn(2)SiO(4) nanowires were Zn rich and Mn doped. Temperature dependent photoluminescence (PL) measurements showed three distinct emission bands: green, yellow and red due to Mn doping in the α-phase, ß-phase and the substitution of Si with Mn in the α-phase, respectively. The PL analysis showed that these emission bands followed anomalous Berthelot-type behavior. The carrier escape energies were 70 ± 3 meV, 49 ± 2 meV and 65 ± 4 meV for the 530, 570 and 660 nm bands, respectively, while the radiation rates (Er =) were 1.0 ± 0.4 meV, 3.10 ± 1.10 meV and 1.4 ± 0.4 meV corresponding to the three respective bands. Mn doping of Zn(2)SiO(4) nanowires induced ferromagnetism, which was observed above room temperature, with a Curie temperature well above 380 K. The observation of magnetic behavior in this class of semiconductors has potential applications in high temperature spintronics and magneto-optical devices.
RESUMEN
The exchange bias field has been measured in a set of Co-Cr2O3 nanocomposites in order to distinguish between the bulk and interfacial contributions to H(ex). The studies were carried out on a set of samples prepared by the sol gel technique in which the Co concentration was varied between 30 and 80 wt%. The particle sizes in all samples were carefully controlled so as to enable a comparison of their magnetic properties. Using thermal activation measurements we are able to distinguish between contributions to H(ex) arising from the thermal stability of the antiferromagnetic particles (bulk behaviour) and that due to changing interface density with increasing Co concentration. We have interpreted our results in terms of the independent particle volume model.
Asunto(s)
Aleaciones de Cromo/química , Cristalización/métodos , Magnetismo , Nanoestructuras/química , Nanoestructuras/ultraestructura , Sustancias Macromoleculares/química , Ensayo de Materiales , Conformación Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
The departure from perfect spherical symmetry in the case of fullerenes (C60 being the sole exception) induces instabilities due to the stresses generated by the pentagonal protrusions in the σ-bonded surfaces. By assuming σ-π separability and treating π electrons as a degenerate Fermi gas in the two shells around the central σ structure, the resulting degeneracy pressures can further enhance the σ-surface initiated instabilities for non-icosahedral structures (especially for those