Assessment of Biochemical, Inflammatory Biomarkers and Ultra-Processed Food Consumption in Children with Small Intestinal Bacterial Overgrowth: A Cross-Sectional Study.

OBJECTIVE: This study evaluated anthropometric, biochemical, and inflammatory biomarkers, as well as dietary intake in Brazilian children diagnosed with small intestinal bacterial overgrowth (SIBO) and compared them with their counterparts without SIBO. METHODS: This was a cross-sectional study with 106 children aged 7 to 10 years. A glucose-hydrogen breath test was performed to diagnose small intestinal bacterial overgrowth (SIBO). Anthropometric and dietary characteristics were assessed. Blood samples were collected and serum biochemical parameters and cytokines were measured. RESULTS: The occurrence of SIBO was 13.2%. Age, BMI, BMI/age WC, BFP, sex and biochemical markers were similar between SIBO-positive and SIBO-negative children (p > 0.05). High consumption of ultra-processed foods tended to be higher in SIBO-positive compared to SIBO-negative children (47.8 ± 8.2 vs. 42.6 ± 9.5, p = 0.06). Serum levels of IL-17 were higher in SIBO-positive than in SIBO-negative children [69.5 (5.4-125.7) vs. 53.4 (2.3-157.7), p = 0.03], while serum levels of IL-10 were lower in SIBO-positive than in SIBO-negative children [2.3 (0.6-7.2) vs. 5.7 (0.5-30.8), p = 0.04]. Finally, in a logistic regression adjusted for sex, BMI and age, consumption of ultra-processed foods (p = 0.03) and IL-6 levels (p = 0.003) were found to contribute to the occurrence of SIBO. CONCLUSION: this study identified for the first time an occurrence of 13% of SIBO in children living in the northeastern region of Brazil and showed that consumption of ultra-processed foods and serum levels of IL-6 may influence the occurrence of the SIBO in the pediatrics population.

Er,Cr:YSGG and 980nm diode lasers influence dentin surface volume after cariogenic challenge: in vitro study.

This study aimed to evaluate the influence of the Er,Cr:YSGG irradiation and 980-nm diode lasers on the surface roughness (SR) and volume loss (VL) of dentin subjected to cariogenic challenge. Subsequently, 130 specimens of bovine dentin were divided into the following 13 groups: NT: no treatment; FG: fluoride gel; FV: fluoride varnish; Di: 980-nm diode; Di + FG; Di + FV; FG + D; FV + Di; Er: Er,Cr:YSGG; Er + FG; Er + FV; FG + Er and FV + Er. Er,Cr:YSGG laser parameters were as follows: 0.25 W; 5.0 Hz; 4.46 J/cm2 without water and 55% air. Furthermore, the 980-nm diode laser parameters were 2.0 W; 2.0 Hz; 21.41 J/cm2. The samples from each group were subjected to pH cycling. A confocal laser scanning microscope was used to evaluate SR and VL. Difference between the volume of the reference and treated areas + DES/RE was used to determine SR and VL. The mean values of the different groups were subjected to analysis of variance and Tukey's post-hoc test. The VL values were analyzed using the Kruskal-Wallis and Dunn post-hoc test (p < 0.05). The SR of the reference area did not show a statistically significant 1807-3107-bor-38-e025treatment and cariogenic challenge (p > 0.05). Moreover, VL in the FV + Di and FV + Er groups showed a statistically significant difference compared with areas submitted to different types of treatment and cariogenic challenge (p > 0.05). Er,Cr:YSGG and 980-nm diode lasers associated with fluoride varnishes decreased dentin VL in bovine teeth submitted to cariogenic challenge.

Influence of Er:YAG and ND:YAG laser irradiation and fluoride application on surface roughness and dentin surface wear after erosive challenge - An in vitro study.

Background: To evaluate the effectiveness of Er:YAG and Nd:YAG laser on dentin hypersensitivity prevention, associated or not to acidulated phosphate fluoride (APF) after erosive challenge. Material and Methods: 104 specimens were obtained from bovine dentine and divided into groups (n=13): G1: Er:YAG; G2: Er:YAG followed by application of APF; G3: application of APF followed by Er:YAG, simultaneously; G4: Nd:YAG; G5: Nd:YAG followed by application of APF; G6: application of APF followed by Nd:YAG, simultaneously; G7:application of APF; G8: untreated. The parameters for Er:YAG were:10s, distance of 4mm, water cooling flow of 2mL/min, 2Hz, 3.92J/cm2. For the Nd:YAG: 10s, distance of 1mm, without cooling, 10Hz, 70.7J/cm2. The erosive drink was a cola at 4°C, 3×/day for 1 minute, for 5 days. Roughness and wear analysis were done in confocal laser microscope. Data were statistically analyzed (α=0.05). Results: As regards roughness, there was no statistically difference among the groups. The groups irradiated with Er:YAG had a volume loss lower. G6 showed higher values than the groups irradiated with Er:YAG and lower than the other groups. The other groups irradiated with Nd:YAG showed similar wear results to the control. Conclusions: The Er:YAG laser showed the lowest volume loss from wear analysis, suggesting the increased the acid resistance of dentin. Key words:Dentine sensitivity, Lasers, Sodium fluoride.

Influence of preventive remineralizing techniques on surface roughness and volume loss of dentin submitted to erosive and/or abrasive challenges.

Background: The objective this study was to evaluate the influence of preventive remineralizing techniques on surface roughness and volume loss of dentin submitted to erosive and/or abrasive challenges. Material and Methods: One hundred and eighty specimens of bovine root dentin were made; half of each was isolated (without treatment - WT) and half was subjected to the following remineralizing techniques: fluoride varnish (FV); Regenerate Boosting Serum® (RBS); Er,Cr:YSGG laser (L); fluoride varnish+laser (FV+L); Regenerate Boosting Serum®+laser (RBS+L). The specimens were submitted to erosive, abrasive and erosive followed by abrasive challenge. Erosion was carried out for 5 minutes, twice a day for 10 days. Abrasion was performed with an electric toothbrush and slurry solution for 60 seconds. The evaluation was performed by confocal laser scanning microscopy. Analysis of variance and Tukey tests were used for surface roughness; volume loss comparison was performed using the Kruskal-Wallis test and Dunn's post-hoc (p<0.05). Results: There was no statistically significant difference in the surface roughness of the reference area in relation to the areas submitted to different types of treatment and challenges (p>0.05). Regarding volume loss, the untreated group submitted to erosive/abrasive challenges showed greater percentage of volume loss compared to the other groups (p<0.05). Conclusions: It is concluded that preventive remineralizing techniques are effective in maintaining dentin volume after erosive/abrasive challenges. Key words:YSGG lasers, Dentin, Erosion, Tooth Abrasion.

Evaluation of cardiac autonomic function and low-grade inflammation in children with obesity living in the Northeast Brazilian region.

OBJECTIVE: Evaluate autonomic function and low-grade inflammation and characterize the correlation between these variables in schoolchildren with obesity living in the Brazilian northeast region. METHODS: 84 children with obesity and 41 with normal weight were included in this cross-sectional study. Anthropometry, body composition, blood pressure (BP), inflammatory biomarkers, and heart rate variability (HRV) indexes were analyzed in children aged 7 to 11 years. RESULTS: children with obesity had increased systolic (p = 0.0017) and diastolic (p = 0.0131) BP and heart rate (p = 0.0022). The children with obesity displayed significantly lower SDNN, RMSSD, NN50, HF (ms), HF (nu), SD1, SD2, and higher LF (ms), LF (nu), LF/HF, SD1/SD2, DFA-α1, and DFA-α2, compared to normal weight. A lower and higher capacity for producing IL-10 (p = 0.039) and IL-2 (p = 0.009), respectively, were found in children with obesity compared to children with normal weight. Although IL-2, IL-4 and IL17A did not correlate with HRV parameters, IL-6 was positively correlated with SDNN, LF (ms) and SD2, TNF-α was positively correlated with LF/HF and SD1/SD2 ratio, and IFN-γ was positively correlated with SDNN, RMMSSD, NN50, LF (ms), HF (ms), SD1, and SD2. CONCLUSIONS: The findings suggest that children with obesity have impaired autonomic function and systemic low-grade inflammation compared to children within the normal weight range, the inflammatory biomarkers were correlated with HRV parameters in schoolchildren living in the northeastern region of Brazil.

High glycemia and resistin normalized in children with double burden of malnutrition: a cross-sectional study.

The coexistence of stunting and excess weight in the same individual is defined as a double burden of malnutrition (DBM) and is associated with noncommunicable diseases. In this study, we evaluated the impact of DBM on adipokine concentrations and metabolic profiles in children compared with weight excess alone. Children were allocated to the weight excess group (n = 23) (height-for-age (HAZ) > 0.0 and < 2.0 Z-score and body mass index-for-age (BMI/A) > 1.0 Z-score) or DBM (n = 22) group (HAZ < -1.0 Z-score (including mild stunting) and BMI/A > 1.0 Z-score). Lipid, glycemic profile, resistin, plasminogen activator inhibitor-1, leptin, and adiponectin concentrations were analyzed. Glycemia was significantly higher in the DBM group compared to the weight excess group (5.05 (4.76-5.31) mmol/L vs. 4.57 (4.35-4.81) mmol/L), although no differences were found in insulin and homeostasis model assessment of insulin resistance (HOMA-IR). Adipokine concentrations did not differ between the groups. However, the DBM group showed higher resistin concentrations normalized by body fat mass than those of the weight excess group (1.44 (0.98-1.93) ng/mL vs. 0.76 (0.55-1.45) ng/mL). Insulin and HOMA-IR showed a negative correlation with adiponectin (r = -0.590 and -0.624, respectively, both p < 0.01). DBM was associated with increased glucose and resistin concentrations adjusted by fat mass compared to that associated with excess weight alone. Therefore, this association between mild stunting and weight excess has deleterious potential for long-term metabolic function, highlighting an additional precaution against weight gain in children, especially in those with stunting.

Evaluation of cardiac autonomic function and low-grade inflammation in children with obesity living in the Northeast Brazilian region

Abstract Objective Evaluate autonomic function and low-grade inflammation and characterize the correlation between these variables in schoolchildren with obesity living in the Brazilian northeast region. Methods 84 children with obesity and 41 with normal weight were included in this cross-sectional study. Anthropometry, body composition, blood pressure (BP), inflammatory biomarkers, and heart rate variability (HRV) indexes were analyzed in children aged 7 to 11 years. Results children with obesity had increased systolic (p= 0.0017) and diastolic (p= 0.0131) BP and heart rate (p= 0.0022). The children with obesity displayed significantly lower SDNN, RMSSD, NN50, HF (ms), HF (nu), SD1, SD2, and higher LF (ms), LF (nu), LF/HF, SD1/SD2, DFA-α1, and DFA-α2, compared to normal weight. A lower and higher capacity for producing IL-10 (p= 0.039) and IL-2 (p= 0.009), respectively, were found in children with obesity compared to children with normal weight. Although IL-2, IL-4 and IL17A did not correlate with HRV parameters, IL-6 was positively correlated with SDNN, LF (ms) and SD2, TNF-α was positively correlated with LF/HF and SD1/SD2 ratio, and IFN-γ was positively correlated with SDNN, RMMSSD, NN50, LF (ms), HF (ms), SD1, and SD2. Conclusions The findings suggest that children with obesity have impaired autonomic function and systemic low-grade inflammation compared to children within the normal weight range, the inflammatory biomarkers were correlated with HRV parameters in schoolchildren living in the northeastern region of Brazil.

Er,Cr:YSGG and 980nm diode lasers influence dentin surface volume after cariogenic challenge: in vitro study

Abstract This study aimed to evaluate the influence of the Er,Cr:YSGG irradiation and 980-nm diode lasers on the surface roughness (SR) and volume loss (VL) of dentin subjected to cariogenic challenge. Subsequently, 130 specimens of bovine dentin were divided into the following 13 groups: NT: no treatment; FG: fluoride gel; FV: fluoride varnish; Di: 980-nm diode; Di + FG; Di + FV; FG + D; FV + Di; Er: Er,Cr:YSGG; Er + FG; Er + FV; FG + Er and FV + Er. Er,Cr:YSGG laser parameters were as follows: 0.25 W; 5.0 Hz; 4.46 J/cm2 without water and 55% air. Furthermore, the 980-nm diode laser parameters were 2.0 W; 2.0 Hz; 21.41 J/cm2. The samples from each group were subjected to pH cycling. A confocal laser scanning microscope was used to evaluate SR and VL. Difference between the volume of the reference and treated areas + DES/RE was used to determine SR and VL. The mean values of the different groups were subjected to analysis of variance and Tukey's post-hoc test. The VL values were analyzed using the Kruskal-Wallis and Dunn post-hoc test (p < 0.05). The SR of the reference area did not show a statistically significant 1807-3107-bor-38-e025treatment and cariogenic challenge (p > 0.05). Moreover, VL in the FV + Di and FV + Er groups showed a statistically significant difference compared with areas submitted to different types of treatment and cariogenic challenge (p > 0.05). Er,Cr:YSGG and 980-nm diode lasers associated with fluoride varnishes decreased dentin VL in bovine teeth submitted to cariogenic challenge.

Evaluating the impact of modeling the family effect for clonal selection in potato-breeding programs.

Because of its wide distribution, high yield potential, and short cycle, the potato has become essential for global food security. However, the complexity of tetrasomic inheritance, the high level of heterozygosity of the parents, the low multiplication rate of tubers, and the genotype-by-environment interactions impose severe challenges on tetraploid potato-breeding programs. The initial stages of selection take place in experiments with low selection accuracy for many of the quantitative traits of interest, for example, tuber yield. The goal of this study was to investigate the contribution of incorporating a family effect in the estimation of the total genotypic effect and selection of clones in the initial stage of a potato-breeding program. The evaluation included single trials (STs) and multi-environment trials (METs). A total of 1,280 clones from 67 full-sib families from the potato-breeding program at Universidade Federal de Lavras were evaluated for the traits total tuber yield and specific gravity. These clones were distributed in six evaluated trials that varied according to the heat stress level: without heat stress, moderate heat stress, and high heat stress. To verify the importance of the family effect, models with and without the family effect were compared for the analysis of ST and MET data for both traits. The models that included the family effect were better adjusted in the ST and MET data analyses for both traits, except when the family effect was not significant. Furthermore, the inclusion of the family effect increased the selective efficiency of clones in both ST and MET analyses via an increase in the accuracy of the total genotypic value. These same models also allowed the prediction of clone effects more realistically, as the variance components associated with family and clone effects within a family were not confounded. Thus, clonal selection based on the total genotypic value, combining the effects of family and clones within a family, proved to be a good alternative for potato-breeding programs that can accommodate the logistic and data tracking required in the breeding program.

A High-Fat Diet Induces Cardiac Damage in Obesity-Resistant Rodents with Reduction in Metabolic Health.

BACKGROUND/AIMS: Obesity resistance is associated with the complex interaction of stringent and environmental factors that confer the ability to resist mass gain and body fat deposition, even when eating high-calorie diets. Considering that there are numerous gaps in the literature on the metabolic processes that explain Obesity resistance, specifically in relation to oxidative stress, the purpose of the study was to investigate whether obesity-resistant (OR) rats develop elevated reactive oxygen species in cardiac tissue. METHODS: Wistar rats were initially randomized into two groups: a standard diet (SD) and a high-fat diet (HFD) group. The SD and HFD groups were further divided into control (C), OR, and obese prone (OP) subgroups based on body weight. This criterion consisted of organizing the animals in each group in ascending order according to body weight (BW), and the cutoff point was identified in the animals by terciles: 1) lower BW; 2) intermediate BW; and 3) higher BW. Rats were sacrificed on the 14th week, and serum and organs were collected. Nutritional assessment, food profiles, histological analysis, comorbidities, and cardiovascular characteristics were determined. RESULTS: BW showed a significant difference between the standard diet and high-fat diet groups in the 4th week of the experimental protocol, characterizing obesity. In the 4th week, after the characterization of Obesity resistance, there was a significant difference in BW between groups C, OP, and OR. The OP and OR groups showed a significant increase in caloric intake in relation to the C group. The OP group showed a significant increase in final BW, retroperitoneal fat pad mass, sum of corporal fat deposits and reactive oxygen species, in relation to groups C and OR. The area under the glycemic curve, insulin resistance index and basal glucose were elevated in the OP group in relation to the C. OP also promoted an increase in HOMA-IR when compared with C. OR rats showed a non-significant increase in insulin and HOMA-IR in OR vs. C (p = ~0.1), but no significant differences were observed between OP vs. OR for these parameters, suggesting that both groups suffered from decreased metabolic health. Total cardiac mass, left ventricular cross-sectional area, and cholesterol levels were significantly elevated in the OP and OR groups compared with the C group. CONCLUSION: A high-fat diet induces cardiac damage in obesity-resistant rodents with reduction in metabolic health.

Effects of preoperative sarcopenia-related parameters on the musculoskeletal and metabolic outcomes after bariatric surgery: a one-year longitudinal study in females.

Reduced muscle mass and/or strength are risk factors for metabolic and musculoskeletal impairment. The present study evaluated anthropometric, metabolic, and musculoskeletal outcomes in females with and without sarcopenic-obesity parameters who underwent bariatric surgery during a 1-year follow-up. A prospective, single-center cohort study was conducted in females with obesity undergoing preoperative evaluation for surgery. In the preoperative period, females were allocated into obesity with sarcopenic-obesity parameters (SOP group, n = 15) and without sarcopenic-obesity parameters (obesity group, n = 21). Sarcopenic obesity parameters were defined as lower appendicular skeletal mass adjusted for weight (ASM/wt) and/or low handgrip strength (HGS). Anthropometric, metabolic, and musculoskeletal parameters were assessed before surgery and at 3 months, 6 months, and a 1-year after bariatric surgery. Weight loss was similar between groups (p > 0.05). Weight, body mass index, fat mass, body fat percentage, skeletal muscle mass, fat-free mass, fat-free mass index, HGS were reduced in both groups during the 1-year follow-up (p < 0.05). However, when muscle mass and strength were analyzed relative to body size, an improvement after bariatric surgery was found in both groups (p < 0.05). Total cholesterol, LDL-c, triglycerides, fasting glucose, glycated hemoglobin, insulin, and insulin resistance were reduced in both groups during the 1-year follow-up (p < 0.05). In addition, HDL-c serum concentration increased in females with and without sarcopenic-obesity parameters over the 1-year follow-up (p < 0.05). Both groups had decreased bone mineral density (BMD) at all sites (lumbar spine, femoral neck, and total femur) over the 1-year follow-up (p < 0.05). The highest quartile of ASM/wt was positively associated with BMD variables in a longitudinal analysis, suggesting that preserved ASM/wt in pre-surgery may be beneficial for BMD after 1 year of bariatric surgery. The results showed that bariatric surgery promotes similar musculoskeletal and metabolic changes in females with preserved muscle mass and strength or in females with sarcopenia-related parameters.

Effects of Preoperative Sarcopenia-Related Parameters on Cardiac Autonomic Function in Women with Obesity Following Bariatric Surgery: A One-Year Prospective Study.

OBJECTIVES: Investigate changes in blood pressure (BP) and heart rate variability (HRV) in women with and without sarcopenia-related parameters who underwent bariatric surgery (BS) during a one-year follow-up. SUBJECTS AND METHODS: Women were separated into obesity (OB, n = 20) and women with obesity displaying sarcopenia-related parameters (SOP, n = 14) and evaluated before BS and 3, 6, and 12 months after BS. SOP was defined as low handgrip strength (HS) and/or low appendicular skeletal mass adjusted for weight (ASM/wt × 100, %) in the lowest quartile of the sample. ASM/wt × 100, % and HS were significantly lower in SOP than OB over a one-year follow-up of BS (p < 0.05). RESULTS: There was a reduction in diastolic BP, heart rate (HR), SDHR, LF, and the LF/HF ratio (p < 0.05) and an increase in the HF band in both groups during the follow-up period (p < 0.05). SOP women had reduced root mean square differences of successive RR intervals (RMSSD) and HF band and an increased LF band and SD2/SD1 ratio compared to the OB group during the one-year follow-up (p < 0.05). ASM/wt × 100, % was negatively associated with the LF band (r = -0.24, p = 0.00) and positively associated with the HF band (r = 0.22, p = 0.01). Conversely, HS had no association with LF (r = -0.14, p = 0.09) and HF (r = 0.11, p = 0.19). ASM/wt × 100, % and HS were negatively associated with the LF/HF ratio (p < 0.05). CONCLUSIONS: Women who underwent BS had an improved HRV over a one-year follow-up. However, the improvement in HRV variables was less pronounced in women with low muscle mass and/or HS during the follow-up period.

Obesity-induced hyperglycemia impairs oral tolerance induction and aggravates food allergy.

Obesity and type 2 diabetes (T2D) have been found to be associated with abnormalities in several organs, including the intestine. These conditions can lead to changes in gut homeostasis, compromising tolerance to luminal antigens and increasing susceptibility to food allergies. The underlying mechanisms for this phenomenon are not yet fully understood. In this study, we investigated changes in the intestinal mucosa of diet-induced obese mice and found that they exhibited increased gut permeability and reduced Treg cells frequency. Upon oral treatment with ovalbumin (OVA), obese mice failed to develop oral tolerance. However, hyperglycemia treatment improved intestinal permeability and oral tolerance induction in mice. Furthermore, we observed that obese mice exhibited a more severe food allergy to OVA, and this allergy was alleviated after treatment with a hypoglycemic drug. Importantly, our findings were translated to obese humans. Individuals with T2D had higher serum IgE levels and downregulated genes related to gut homeostasis. Taken together, our results suggest that obesity-induced hyperglycemia can lead to a failure in oral tolerance and to exacerbation of food allergy. These findings shed light on the mechanisms underlying the relationship among obesity, T2D, and gut mucosal immunity, which could inform the development of new therapeutic approaches.

The Therapeutic Effect of Phosphopeptide P140 Attenuates Inflammation Induced by Uric Acid Crystals in Gout Arthritis Mouse Model.

Gout is a painful form of inflammatory arthritis characterized by the deposition of monosodium urate (MSU) crystals in the joints. The aim of this study was to investigate the effect of peptide P140 on the inflammatory responses in crystal-induced mouse models of gout and cell models including MSU-treated human cells. Injection of MSU crystals into the knee joint of mice induced neutrophil influx and inflammatory hypernociception. Injection of MSU crystals subcutaneously into the hind paw induced edema and increased pro-inflammatory cytokines levels. Treatment with P140 effectively reduced hypernociception, the neutrophil influx, and pro-inflammatory cytokine levels in these experimental models. Furthermore, P140 modulated neutrophils chemotaxis in vitro and increased apoptosis pathways through augmented caspase 3 activity and reduced NFκB phosphorylation. Moreover, P140 increased the production of the pro-resolving mediator annexin A1 and decreased the expression of the autophagy-related ATG5-ATG12 complex and HSPA8 chaperone protein. Overall, these findings suggest that P140 exerts a significant beneficial effect in a neutrophilic inflammation observed in the model of gout that can be of special interest in the design of new therapeutic strategies.

Laser irradiation prevents root caries: Microhardness and scanning electron microscopy analysis.

Context: A promising option for the prevention of dental caries is the use of laser irradiation. Aims: Evaluate the effects of Er:YAG, Nd:YAG, and CO2 laser irradiation, associated or not to 2% sodium fluoride (2% NaF), on root caries prevention. Material and Methods: One hundred and four human root dentin samples were divided in eight groups (n = 13). A 9-mm2-area on each dentin sample was delimited and treated as follows: G1: no treatment (control); G2: 2% NaF; G3: Er:YAG; G4: 2% NaF + Er:YAG; G5: Nd:YAG; G6: 2% NaF + Nd:YAG; G7: CO2; G8: 2% NaF + CO2. When used, the 2% NaF was applied before irradiation for 4 min. The samples were subjected to a 2-week cariogenic challenge, consisted of daily immersion in de-remineralizing solutions for 6 h and 18 h, respectively. Knoop hardness (KHN) were evaluated (10 g and 20 s) at different depths from the dentin surface. The samples (n = 3) were prepared for scanning electron microscopy (SEM). Microhardness data were analysed by one-way analysis of variance (ANOVA) and Fisher's test (α = 5%). Results: The Er:YAG laser group (KHN = 41.30) promoted an increase in acid resistance of the dentin (P < 0.05) when compared to all groups. There was no synergism between laser irradiation and 2% NaF application. Morphological changes were observed after irradiation with all lasers; carbonization and cracks were also observed, except when Er:YAG were used. Conclusions: Er:YAG laser irradiation can safely increase the acid resistance of the dentin surface of the root, since it promoted a significant increase in surface hardness. The application of 2% NaF did not result in a synergistic effect.

Presence of Streptococcus mutans and interleukin-6 and -10 in amniotic fluid.

AIM: To evaluate the presence of Streptococcus mutans (SM), main pathogen of dental caries, interleukin-6 and -10 in samples of amniotic fluid (AF) and clinical and oral data of the healthy pregnancy, to investigate the SM exposition in intrauterine life and to elucidate the presence of antibodies to SM in newborns' saliva (SA) with undetectable levels of this microorganism described in the previous study. METHODS: The study involved the participation of 26 women with term deliveries and without gestational complications. General health data were collected through a questionnaire applied to the participants. The volunteers were examined orally, the caries experience (decayed, missing, and filled teeth (DMFT) scores) was calculated and unstimulated SA was collected. The acquisition of AF was performed during cesarean sections and stocked on ice. The analysis of the presence of SM-DNA was performed by real-time PCR assays with specific primers. Levels of IL-6 and IL-10 were performed by ELISA with specific kits for these interleukins in the AF samples. RESULTS: 69.2% of the AF samples had detectable SM, and 65% of the women had the bacteria in the AF and SA at the same time. There was a positive association between the presence of SM in AF and a report of not going to the dentist frequently (p<.05). There was no statistically significant difference between the frequency of AF with or without detection of MS and active caries (p>.05). However, the DMFT scores of women with positive AF for SM were higher than that of women without detectable MS (p<.05). IL-6 levels were higher than IL-10 in AF (p<.05). There were no significant differences in the levels of interleukins between samples with detectable SM or in AF and even with clinical data analysis (p>.05). CONCLUSIONS: The AF samples have SM in quantifiable levels, probably associated with the greatest caries experience, and seen by the highest DMFT index. Interleukin levels were not related to the presence of MS. The presence of SM in AF may explain the mucosal immune stimulation of newborn children by the previous detection of salivary antibodies against SM.

Development of Streptococcus mutans biofilm in the presence of human colostrum and 3'-sialyllactose.

AIM: To evaluate the initial adhesion and formation of Streptococcus mutans biofilm in vitro in the presence of saliva, human colostrum and 3'-sialyllactose. METHODS: Human colostrum and salivas were collected from 30 mothers and newborn postpartum. Eighteen hours culture of S. mutans was treated with colostrum or 3'-sialyllactose in three different moments: before, during, and after 24 h from the microbial inoculation. Salivas were also tested in conjunction with colostrum. The assays were realized in sterile 96-well flat-bottom microtiter plates for 24 h. The biofilms were fixed, washed, stained with crystal violet, and extracted. Absorbance was measured to evaluate biofilm growth mass. RESULTS: Colostrum applied after and during the inoculation decreased biofilm formation when compared with the control (p < .05). The presence of saliva increased the biofilm biomass (p < .05). The application of 3'-sialyllactose reduced biofilm formation independently of moments of application (p < .05). CONCLUSION: Saliva contributed to the proliferation of biofilm and colostrum did not prevent the initial adhesion, but interfered in the accumulation and development of microorganisms in biofilms. 3'-sialyllactose significantly decreased biofilm formation. This information expands the importance of colostrum as a potent oral antimicrobial biofluid.

Nonlinear models in the height description of the Rhino sunflower cultivar / Modelos não lineares na descrição de altura da cultivar de girassol Rhino

Sunflower produces achenes and oil of good quality, besides serving for production of silage, forage and biodiesel. Growth modeling allows knowing the growth pattern of the crop and optimizing the management. The research characterized the growth of the Rhino sunflower cultivar using the Logistic and Gompertz models and to make considerations regarding management based on critical points. The data used come from three uniformity trials with the Rhino confectionery sunflower cultivar carried out in the experimental area of the Federal University of Santa Maria - Campus Frederico Westphalen in the 2019/2020 agricultural harvest. In the first, second and third trials 14, 12 and 10 weekly height evaluations were performed on 10 plants, respectively. The data were adjusted for the thermal time accumulated. The parameters were estimated by ordinary least square's method using the Gauss-Newton algorithm. The fitting quality of the models to the data was measured by the adjusted coefficient of determination, Akaike information criterion, Bayesian information criterion, and through intrinsic and parametric nonlinearity. The inflection points (IP), maximum acceleration (MAP), maximum deceleration (MDP) and asymptotic deceleration (ADP) were determined. Statistical analyses were performed with Microsoft Office Excel® and R software. The models satisfactorily described the height growth curve of sunflower, providing parameters with practical interpretations. The Logistics model has the best fitting quality, being the most suitable for characterizing the growth curve. The estimated critical points provide important information for crop management. Weeds must be controlled until the MAP. Covered fertilizer applications must be carried out between the MAP and IP range. ADP is an indicator of maturity, after reaching this point, the plants can be harvested for the production of silage without loss of volume and quality.

O girassol produz aquênios e óleo de qualidade, além de servir para produção de silagem, forragem e biodiesel. A modelagem de crescimento permite conhecer o padrão de crescimento da cultura e otimizar o manejo. O objetivo deste trabalho foi caracterizar o crescimento da cultivar de girassol Rhino por meio dos modelos Logístico e Gompertz e fazer considerações a respeito do manejo com base em pontos críticos. Os dados utilizados são oriundos de três ensaios de uniformidade com a cultivar de girassol confeiteiro Rhino, conduzidos na área experimental da Universidade Federal de Santa Maria, Campus Frederico Westphalen, na safra 2019/2020. Foram realizadas 14, 12 e 10 avaliações semanais de altura em 10 plantas, respectivamente, no primeiro, segundo e terceiro ensaio. Os dados foram ajustados em função da soma térmica acumulada. Os parâmetros foram estimados por meio do método dos mínimos quadrados ordinários, usando o algoritmo de Gauss-Newton. A qualidade de ajuste dos modelos aos dados foi medida pelo coeficiente de determinação ajustado, critério de determinação de Akaike, critério bayesiano de informação, e por meio da não linearidade intrínseca e paramétrica. Foram determinados os pontos de inflexão (IP), máxima aceleração (MAP), máxima desaceleração (MDP) e desaceleração assintótica (ADP). As análises estatísticas foram realizadas com Microsoft Office Excel® e o software R. Os modelos descreveram de forma satisfatória a curva de crescimento da altura do girassol, fornecendo parâmetros com interpretações práticas. O modelo Logístico apresenta melhor qualidade de ajuste, sendo o mais adequado para caracterização da curva de crescimento. Os pontos críticos estimados fornecem informações importantes para o manejo da cultura. As plantas daninhas devem ser controladas até o MAP. As aplicações de fertilizantes em cobertura devem ser realizadas entre MAP e IP. O ADP é um indicador de maturidade, após atingir este ponto, as plantas podem ser colhidas para a produção de silagem sem perda de volume e qualidade.

Possible Benefits of Faecalibacterium prausnitzii for Obesity-Associated Gut Disorders.

Metabolic disorders are an increasing concern in the industrialized world. Current research has shown a direct link between the composition of the gut microbiota and the pathogenesis of obesity and diabetes. In only a few weeks, an obesity-inducing diet can lead to increased gut permeability and microbial dysbiosis, which contributes to chronic inflammation in the gut and adipose tissues, and to the development of insulin resistance. In this review, we examine the interplay between gut inflammation, insulin resistance, and the gut microbiota, and discuss how some probiotic species can be used to modulate gut homeostasis. We focus primarily on Faecalibacterium prausnitzii, a highly abundant butyrate-producing bacterium that has been proposed both as a biomarker for the development of different gut pathologies and as a potential treatment due to its production of anti-inflammatory metabolites.

Mechanical properties, in vitro and in vivo biocompatibility analysis of pure iron porous implant produced by metal injection molding: A new eco-friendly feedstock from natural rubber (Hevea brasiliensis).

Metal injection molding (MIM) has become an important manufacturing technology for biodegradable medical devices. As a biodegradable metal, pure iron is a promising biomaterial due to its mechanical properties and biocompatibility. In light of this, we performed the first study that manufactured and evaluated the in vitro and in vivo biocompatibility of samples of iron porous implants produced by MIM with a new eco-friendly feedstock from natural rubber (Hevea brasiliensis), a promisor binder that provides elastic property in the green parts. The iron samples were submitted to tests to determine density, microhardness, hardness, yield strength, and stretching. The biocompatibility of the samples was studied in vitro with adipose-derived mesenchymal stromal cells (ADSCs) and erythrocytes, and in vivo on a preclinical model with Wistar rats, testing the iron samples after subcutaneous implant. Results showed that the manufactured samples have adequate physical, and mechanical characteristics to biomedical devices and they are cytocompatible with ADSCs, hemocompatible and biocompatible with Wistars rats. Therefore, pure iron produced by MIM can be considered a promising material for biomedical applications.