Highly-stable silver nanobelts joined via diffusion-free attachment.

Silver nanobelts are demonstrated here to undergo inter-particle joining at relatively low temperatures of less than 180 °C. For surface-coated networks of nanobelts this joining reduced the network sheet resistance by 95%. The joining mechanism appears to be non-diffusional oriented attachment, caused by the thermal reactivation of the halted oriented attachment mechanism that occurred originally at room temperature during the rapid nanobelt synthesis. This self-assembly mechanism was explored by in situ electrical and calorimetric experiments, and supported by electron microscopy. Unlike pentagonal silver nanowires, silver nanobelts do not rely on diffusional instability to achieve workably low joining temperatures. The oriented attachment displayed by nanobelts represents a new approach to achieving valuable reductions in network resistance, disentangled from the instability and diffusion-driven failure by nanoparticle degradation displayed by competing silver nanoparticles.

Single-step synthesis of graphene quantum dots by femtosecond laser ablation of graphene oxide dispersions.

In the last few years, graphene quantum dots (GQDs) have attracted the attention of many research groups for their outstanding properties, which include low toxicity, chemical stability and photoluminescence. One of the challenges of GQD synthesis is finding a single-step, cheap and sustainable approach for synthesizing these promising nanomaterials. In this study, we demonstrate that femtosecond laser ablation of graphene oxide (GO) dispersions could be employed as a facile and environmentally friendly synthesis method for GQDs. With the proper control of laser ablation parameters, such as ablation time and laser power, it is possible to produce GQDs with average sizes of 2-5 nm, emitting a blue luminescence at 410 nm. We tested the feasibility of the synthesized GQDs as materials for electronic devices by aerosol-jet printing of an ink that is a mixture of water dispersion of laser synthesized GQDs and silver nanoparticle dispersion, which resulted in lower resistivity of the final printed patterns. Preliminary results showed that femtosecond laser synthesized GQDs can be mixed with silver nanoparticle dispersion to fabricate a hybrid material, which can be employed in printing electronic devices by either printing patterns that are more conductive and/or reducing costs of the ink by decreasing the concentration of silver nanoparticles (AgNPs) in the ink.

Porous silver nanosheets: a novel sensing material for nanoscale and microscale airflow sensors.

Fabrication of nanoscale and microscale machines and devices is one of the goals of nanotechnology. For this purpose, different materials, methods, and devices should be developed. Among them, various types of miniaturized sensors are required to build the nanoscale and microscale systems. In this research, we introduce a new nanoscale sensing material, silver nanosheets, for applications such as nanoscale and microscale gas flow sensors. The silver nanosheets were synthesized through the reduction of silver ions by ascorbic acid in the presence of poly(methacrylic acid) as a capping agent, followed by the growth of silver in the shape of hexagonal and triangular nanoplates, and self-assembly and nanojoining of these structural blocks. At the end of this process, the synthesized nanosheets were floated on the solution. Then, their electrical and thermal stability was demonstrated at 120 °C, and their atmospheric corrosion resistance was clarified at the same temperature range by thermogravimetric analysis. We employed the silver nanosheets in fabricating airflow sensors by scooping out the nanosheets by means of a sensor substrate, drying them at room temperature, and then annealing them at 300 °C for one hour. The fabricated sensors were tested for their ability to measure airflow in the range of 1 to 5 ml min(-1), which resulted in a linear response to the airflow with a response and recovery time around 2 s. Moreover, continuous dynamic testing demonstrated that the response of the sensors was stable and hence the sensors can be used for a long time without detectable drift in their response.

How morphology and surface crystal texture affect thermal stability of a metallic nanoparticle: the case of silver nanobelts and pentagonal silver nanowires.

Thermal instability of metallic nanoparticles is typically attributed to chemical attack by contaminants. However, thermodynamic stability is independent of other affecting parameters. The importance of this will be clarified when the structural change toward a more stable thermodynamic condition may be followed by a chemical reaction with the surroundings, which may cause a wrong diagnosis. In this research, molecular dynamics simulations and experimental observations were performed to investigate the effect of crystallography and surface texture on stability at high temperature using two closely related model nanoparticles: silver nanobelts and pentagonal nanowires. Previously, the instability of silver nanowires was associated with sulfidation of the wire at high temperature. However, we found that the silver nanowires are inherently unstable at high temperature, degrading due to the high-energy nature of the nanowire's predominately (100) crystallographic surface and pentagonal geometry. In contrast, the silver nanobelts resist thermal degradation up to 500 °C because of their predominately low-energy (111) crystallographic surfaces. In this case study, we successfully demonstrate that inherent thermodynamic stability driven by morphology is significant in metallic nanoparticles, and should be investigated when selecting a nanoparticle for high temperature applications. Moreover, we identify a new one-dimensional nanoparticle, the silver nanobelt, with inherent high-temperature stability.

Nanocasting Synthesis of Ultrafine WO3 Nanoparticles for Gas Sensing Applications.

Ultrafine WO3 nanoparticles were synthesized by nanocasting route, using mesoporous SiO2 as a template. BET measurements showed a specific surface area of 700 m 2/gr for synthesized SiO2, while after impregnation and template removal, this area was reduced to 43 m 2/gr for WO3 nanoparticles. HRTEM results showed single crystalline nanoparticles with average particle size of about 5 nm possessing a monoclinic structure, which is the favorite crystal structure for gas sensing applications. Gas sensor was fabricated by deposition of WO3 nanoparticles between electrodes via low frequency AC electrophoretic deposition. Gas sensing measurements showed that this material has a high sensitivity to very low concentrations of NO2 at 250°C and 300°C.