RESUMEN
Given the existing literature on the subject, there is obviously a need for specific advice on quality assurance (QA) tolerances for departments using or implementing 3D printed bolus for radiotherapy treatments. With a view to providing initial suggested QA tolerances for 3D printed bolus, this study evaluated the dosimetric effects of changes in bolus geometry and density, for a particularly common and challenging clinical situation: specifically, volumetric modulated arc therapy (VMAT) treatment of the nose. Film-based dose verification measurements demonstrated that both the AAA and the AXB algorithms used by the Varian Eclipse treatment planning system (Varian Medical Systems, Palo Alto, USA) were capable of providing sufficiently accurate dose calculations to allow this planning system to be used to evaluate the effects of bolus errors on dose distributions from VMAT treatments of the nose. Thereafter, the AAA and AXB algorithms were used to calculate the dosimetric effects of applying a range of simulated errors to the design of a virtual bolus, to identify QA tolerances that could be used to avoid clinically significant effects from common printing errors. Results were generally consistent, whether the treatment target was superficial and treated with counter-rotating coplanar arcs or more-penetrating and treated with noncoplanar arcs, and whether the dose was calculated using the AAA algorithm or the AXB algorithm. The results of this study suggest the following QA tolerances are advisable, when 3D printed bolus is fabricated for use in photon VMAT treatments of the nose: bolus relative electron density variation within [Formula: see text] (although an action level at [Formula: see text] may be permissible); bolus thickness variation within [Formula: see text] mm (or 0.5 mm variation on opposite sides); and air gap between bolus and skin [Formula: see text] mm. These tolerances should be investigated for validity with respect to other treatment modalities and anatomical sites. This study provides a set of baselines for future comparisons and a useful method for identifying additional or alternative 3D printed bolus QA tolerances.
Asunto(s)
Planificación de la Radioterapia Asistida por Computador , Radioterapia de Intensidad Modulada , Fantasmas de Imagen , Impresión Tridimensional , Dosificación RadioterapéuticaRESUMEN
Shielded garments are widely recommended for occupational radiation protection in diagnostic and interventional radiology. This study investigated a novel method for efficiently verifying shielded garment integrity while simultaneously acquiring data for lead-equivalence measurements, using two-dimensional topogram images from computed tomography (CT) scanners. This method was tested against more-conventional measurements with superficial and orthovoltage radiotherapy treatment beams, for 12 shielded garments containing 3 different lead-free shielding materials. Despite some energy-dependent results, all shielded garments approximately achieved their specified lead-equivalence for the energy range expected during clinical use for fluoroscopy procedures, except for three shielded skirts that required two layers of material to be overlapped at the front. All lead-equivalence measurements from CT topograms agreed with or conservatively underestimated the kV narrow-beam results. This method is potentially useful for independently assessing the shielding properties of new shielded garments and performing annual checks for damage or degradation of existing shielded garments.
Asunto(s)
Ropa de Protección , Protección Radiológica , Fantasmas de Imagen , Dosis de Radiación , Dispersión de Radiación , Tomografía , Rayos XRESUMEN
Bolus plays an important role in the radiation therapy of superficial lesions and the application of 3D printing to its design can improve fit and dosimetry. This study quantitatively compares the fits of boluses designed from different imaging modalities. A head phantom was imaged using three systems: a CT simulator, a 3D optical scanner, and an interchangeable lens camera. Nose boluses were designed and 3D printed from each modality. A 3D printed phantom with air gaps of known thicknesses was used to calibrate mean HU to measure air gaps of unknown thickness and assess the fit of each bolus on the head phantom. The bolus created from the optical scanner data resulted in the best fit, with a mean air gap of 0.16 mm. Smoothing of the CT bolus resulted in a more clinically suitable model, comparable to that from the optical scanner method. The bolus produced from the photogrammetry method resulted in air gaps larger than 1 mm in thickness. The use of optical scanner and photogrammetry models have many advantages over the conventional bolus-from-CT method, however workflow should be refined to ensure accuracy if implemented clinically.
Asunto(s)
Óptica y Fotónica/instrumentación , Fotogrametría , Impresión Tridimensional , Tomografía Computarizada por Rayos X , Aire , Calibración , Fantasmas de ImagenRESUMEN
Pesticides used in agriculture may cause adverse health effects among the population living near agricultural areas. However, identifying the populations most likely to be exposed is difficult. We conducted a feasibility study to determine whether satellite imagery could be used to reconstruct historical crop patterns. We used historical Farm Service Agency records as a source of ground reference data to classify a late summer 1984 satellite image into crop species in a three-county area in south central Nebraska. Residences from a population-based epidemiologic study of non-Hodgkin lymphoma were located on the crop maps using a geographic information system (GIS). Corn, soybeans, sorghum, and alfalfa were the major crops grown in the study area. Eighty-five percent of residences could be located, and of these 22% had one of the four major crops within 500 m of the residence, an intermediate distance for the range of drift effects from pesticides applied in agriculture. We determined the proximity of residences to specific crop species and calculated crop-specific probabilities of pesticide use based on available data. This feasibility study demonstrated that remote sensing data and historical records on crop location can be used to create historical crop maps. The crop pesticides that were likely to have been applied can be estimated when information about crop-specific pesticide use is available. Using a GIS, zones of potential exposure to agricultural pesticides and proximity measures can be determined for residences in a study.
Asunto(s)
Agricultura , Plaguicidas/análisis , Salud Pública , Adulto , Anciano , Exposición a Riesgos Ambientales , Estudios de Factibilidad , Femenino , Humanos , Masculino , Persona de Mediana Edad , Plaguicidas/efectos adversos , Nave EspacialRESUMEN
A Nd:YAG laser developed for ophthalmic surgery was studied for safety and efficacy in secondary discission of the posterior capsule in aphakic and pseudophakic subjects. The study involves 6,800 subjects, 526 of whom had completed the six-month postoperative course by the time the data base was closed for analysis. Of the 526 subjects who were treated with the laser, 87.8% had improved vision, with 82.9% achieving a visual acuity of 20/40 or better. This result compares favorably with results for the surgically treated population in which only 68.4% experienced improved vision, with 80.2% achieving a visual acuity of 20/40 or better. Approximately four times more surgically treated subjects than laser-treated subjects experienced diminished vision (14.8%). Cumulative complication rates in the laser-treated population were very low (CME 2.3%, secondary glaucoma 3.6%, retinal detachment 0.4%, overall rate 4.8%). Persistent complications (present at the six-month postoperative period) were present at an overall incidence of 2.3%, comprised primarily of CME, 0.2%, retinal detachment, 0.2%, and secondary glaucoma, 0.8%. Only 5.7% of subjects experienced an intraocular pressure (IOP) rise to 30 mm Hg or greater. Return to the preoperative IOP level occurred in 89% of subjects in the first 24 hours to one week. Predictors of IOP rise to 30 mm Hg or greater were determined to be preoperative glaucoma and/or preoperative IOP of greater than 20 mm Hg.