RESUMEN
The resistive switching response of two terminal metal/oxide/metal devices depends on the stoichiometry of the oxide film, and this is commonly controlled by using a reactive metal electrode to reduce the oxide layer. Here, we investigate compositional and structural changes induced in Nb/Nb2O5 bilayers by thermal annealing at temperatures in the range of 573-973 K and its effect on the volatile threshold switching characteristics of Nb/Nb2O5/Pt devices. Changes in the stoichiometry of the Nb and Nb2O5 films are determined by Rutherford backscattering spectrometry and energy-dispersive X-ray (EDX) mapping of sample cross sections, while the structure of the films is determined by X-ray diffraction, Raman spectroscopy, and transmission electron microscopy (TEM). Such analysis shows that the composition of the Nb and Nb2O5 layers is homogenized by interdiffusion at temperatures less than the crystallization temperature (i.e., >773 K) but that this effectively ceases once the films crystallize. This is explained by comparison with the predictions of a simple diffusion model which shows that the compositional changes are dominated by oxygen diffusion in the amorphous oxide, which is much faster than that in the crystalline phases. We further show that these compositional and structural changes have a significant effect on the electroforming and threshold switching characteristics of the devices, the most significant being a marked increase in their reliability and endurance after crystallization of the oxide films. Finally, we examine the effect of annealing on the quasistatic negative differential resistance characteristics and oscillator dynamics of devices and use a lumped element model to show that this is dominated by changes in the device capacitance resulting from interdiffusion.
RESUMEN
Diamond's unique properties on the nanoscale make it one of the most important materials for use in biosensors and quantum computing and for components that can withstand the harsh environments of space. We synthesize oriented, faceted diamond particles by flash laser heating of glassy carbon at 16 GPa and 2300 K. Detailed transmission electron microscopy shows them to consist of a mosaic of diamond nanocrystals frequently joined at twin boundaries forming microtwins. Striking 3-fold translational periodicity was observed in both imaging and diffraction. This periodicity was shown to originate from nanodimensional wedge-shaped overlapping regions of twinned diamond and not from a possible 9R polytype, which has also been reported in other group IVa elements and water ice. Extended bilayers of hexagonal layer stacking were observed, forming lonsdaleite nanolaminates. The particles exhibited optical fluorescence with a rapid quench time (<1 ns) attributed to their unique twinned microstructure.
RESUMEN
Polydimethyl glutarimide (PMGI) layers with sub-micron thicknesses have been modified in a 2.5 kV Ar plasma immersion ion implantation (PIII) process to introduce free radical covalent binding sites. The surface roughness of the PMGI increased after the PIII treatment but no through-layer defects were observed. When applied to the treated PMGI, horseradish peroxidase (HRP) enzyme remained bound to the surface after extended immersion in sodium dodecyl sulfate solution (SDS). Hence, covalent binding between the activated surface and enzyme was confirmed. This covalent binding was achieved up to 24-h after the PIII process. The treated PMGI was then incorporated as a gate dielectric layer within a lateral three-terminal electrolyte-gated device. The device output characteristics resembled those of post-synaptic outputs; as successive (pre-synaptic) voltage pulses were applied to the gate, paired pulse depression and spike rate dependent plasticity were observed in the source-drain (post-synaptic) current. These characteristics were altered by the presence of HRP immobilised on the plasma-modified PMGI gate dielectric layer thus providing readout detection. These results and preliminary device characteristics show the potential for the plasma functionalized PMGI as a sensitive and reproducible biosensing technology.
Asunto(s)
Piperidonas , Dodecil Sulfato de Sodio , Enzimas Inmovilizadas/química , Iones , Peroxidasa de Rábano Silvestre/químicaRESUMEN
Ureilite meteorites are arguably our only large suite of samples from the mantle of a dwarf planet and typically contain greater abundances of diamond than any known rock. Some also contain lonsdaleite, which may be harder than diamond. Here, we use electron microscopy to map the relative distribution of coexisting lonsdaleite, diamond, and graphite in ureilites. These maps show that lonsdaleite tends to occur as polycrystalline grains, sometimes with distinctive fold morphologies, partially replaced by diamond + graphite in rims and cross-cutting veins. These observations provide strong evidence for how the carbon phases formed in ureilites, which, despite much conjecture and seemingly conflicting observations, has not been resolved. We suggest that lonsdaleite formed by pseudomorphic replacement of primary graphite shapes, facilitated by a supercritical C-H-O-S fluid during rapid decompression and cooling. Diamond + graphite formed after lonsdaleite via ongoing reaction with C-H-O-S gas. This graphite > lonsdaleite > diamond + graphite formation process is akin to industrial chemical vapor deposition but operates at higher pressure (â¼1-100 bar) and provides a pathway toward manufacture of shaped lonsdaleite for industrial application. It also provides a unique model for ureilites that can reconcile all conflicting observations relating to diamond formation.
RESUMEN
We report the synthesis of bulk, highly oriented, crystalline 4H hexagonal silicon (4H-Si), through a metastable phase transformation upon heating the single-crystalline Si_{24} allotrope. Remarkably, the resulting 4H-Si crystallites exhibit an orientation relationship with the Si_{24} crystals, indicating a structural relationship between the two phases. Optical absorption measurements reveal that 4H-Si exhibits an indirect band gap near 1.2 eV, in agreement with first principles calculations. The metastable crystalline transition pathway provides a novel route to access bulk crystalline 4H-Si in contrast to previous transformation paths that yield only nanocrystalline-disordered materials.
RESUMEN
Diamond is an attractive material due to its extreme hardness, high thermal conductivity, quantum optical, and biomedical applications. There is still much that is not understood about how diamonds form, particularly at room temperature and without catalysts. In this work, a new route for the formation of nanocrystalline diamond and the diamond-like phase lonsdaleite is presented. Both diamond phases are found to form together within bands with a core-shell structure following the high pressure treatment of a glassy carbon precursor at room temperature. The crystallographic arrangements of the diamond phases revealed that shear is the driving force for their formation and growth. This study gives new understanding of how shear can lead to crystallization in materials and helps elucidate how diamonds can form on Earth, in meteorite impacts and on other planets. Finally, the new shear induced formation mechanism works at room temperature, a key finding that may enable diamond and other technically important nanomaterials to be synthesized more readily.
RESUMEN
Lateral memristors configured with inert Pt contacts and mixed phase tin oxide layers have exhibited immediate, forming-free, low-power bidirectional resistance switching. Activity dependent conductance and relaxation in the low resistance state resembled short term potentiation in biological synapses. After scanning probe microscopy, x-ray photoelectron spectroscopy and electrical measurements, the device characteristics were attributed to Joule heating induced decomposition of the minority SnO phase and formation of a SnO2 conducting filament with higher effective n-type doping. Finally, the devices recognized input voltage pulse sequences and spectral data by returning unique conductance states, suggesting suitability for bio-inspired pattern recognition systems.
RESUMEN
Hexagonal boron nitride (h-BN) is an ideal substrate for two-dimensional (2D) materials because of its unique electrically insulating nature, atomic smoothness and low density of dangling bonds. Although mechanical exfoliation from bulk crystals produces the most pristine flakes, scalable fabrication of devices is still dependent on other more direct synthetic routes. To date, the most utilized method to synthesize large-area h-BN films is by chemical vapor deposition (CVD) using catalytic metal substrates. However, a major drawback for such synthetic films is the manifestation of thermally-induced wrinkles, which severely disrupt the smoothness of the h-BN films. Here, we provide a detailed characterization study of the microstructure of h-BN wrinkles and demonstrate an effective post-synthesis smoothening route by thermal annealing in air. The smoothened h-BN film showed an improved surface smoothness by up to 66% and resulted in a much cleaner surface due to the elimination of polymer residues with no substantial oxidative damage to the film. The unwrinkling effect is attributed to the hydroxylation of the h-BN film as well as the substrate surface, resulting in a reduction in adhesion energy at the interface. Dehydroxylation occurs over time under ambient conditions at room temperature and the smoothened film can be restored back with the intrinsic properties of h-BN. This work provides an efficient route to achieve smoother h-BN films, which are beneficial for high-performance 2D heterostructure devices.
RESUMEN
Vibrational modes affect fundamental physical properties such as the conduction of sound and heat and can be sensitive to nano- and atomic-scale structure. Probing the momentum transfer dependence of vibrational modes provides a wealth of information about a materials system; however, experimental work has been limited to essentially bulk and averaged surface approaches or to small wave vectors. We demonstrate a combined experimental and theoretical methodology for nanoscale mapping of optical and acoustic phonons across the first Brillouin zone, in the electron microscope, probing a volume ~1010 to 1020 times smaller than that of comparable bulk and surface techniques. In combination with more conventional electron microscopy techniques, the presented methodology should allow for direct correlation of nanoscale vibrational mode dispersions with atomic-scale structure and chemistry.
RESUMEN
Two-dimensional van der Waals materials have demonstrated fascinating optical and electrical characteristics. However, reports on magnetic properties and spintronic applications of van der Waals materials are scarce by comparison. Here, we report anomalous Hall effect measurements on single crystalline metallic Fe3GeTe2 nanoflakes with different thicknesses. These nanoflakes exhibit a single hard magnetic phase with a near square-shaped magnetic loop, large coercivity (up to 550 mT at 2 K), a Curie temperature near 200 K and strong perpendicular magnetic anisotropy. Using criticality analysis, the coupling length between van der Waals atomic layers in Fe3GeTe2 is estimated to be ~5 van der Waals layers. Furthermore, the hard magnetic behaviour of Fe3GeTe2 can be well described by a proposed model. The magnetic properties of Fe3GeTe2 highlight its potential for integration into van der Waals magnetic heterostructures, paving the way for spintronic research and applications based on these devices.
RESUMEN
Carbon exhibits a large number of allotropes and its phase behaviour is still subject to significant uncertainty and intensive research. The hexagonal form of diamond, also known as lonsdaleite, was discovered in the Canyon Diablo meteorite where its formation was attributed to the extreme conditions experienced during the impact. However, it has recently been claimed that lonsdaleite does not exist as a well-defined material but is instead defective cubic diamond formed under high pressure and high temperature conditions. Here we report the synthesis of almost pure lonsdaleite in a diamond anvil cell at 100 GPa and 400 °C. The nanocrystalline material was recovered at ambient and analysed using diffraction and high resolution electron microscopy. We propose that the transformation is the result of intense radial plastic flow under compression in the diamond anvil cell, which lowers the energy barrier by "locking in" favourable stackings of graphene sheets. This strain induced transformation of the graphitic planes of the precursor to hexagonal diamond is supported by first principles calculations of transformation pathways and explains why the new phase is found in an annular region. Our findings establish that high purity lonsdaleite is readily formed under strain and hence does not require meteoritic impacts.
RESUMEN
Plasma immersion ion implantation (PIII) is used to modify the surface properties of polyether ether ketone for biomedical applications. Modifications to the mechanical and chemical properties are characterized as a function of ion fluence (treatment time) to determine the suitability of the treated surfaces for biological applications. Young's modulus and elastic recovery were found to increase with respect to treatment time at the surface from 4.4 to 5.2 MPa and from 0.49 to 0.68, respectively. The mechanical properties varied continuously with depth, forming a graded layer where the mechanical properties returned to untreated values deep within the layer. The treated surface layer exhibited cracking under cyclical loads, associated with an increased modulus due to dehydrogenation and cross-linking; however, it did not show any sign of delamination, indicating that the modified layer is well integrated with the substrate, a critical factor for bioactive surface coatings. The oxygen concentration remained unchanged at the surface; however, in contrast to ion implanted polymers containing only carbon and hydrogen, the oxygen concentration within the treated layer was found to decrease. This effect is attributed to UV exposure and suggests that PIII treatments can modify the surface to far greater depths than previously reported. Protein immobilization on PIII treated surfaces was found to be independent of treatment time, indicating that the surface mechanical properties can be tuned for specific applications without affecting the protein coverage. Our findings on the mechanical properties demonstrate such treatments render PEEK well suited for use in orthopedic implantable devices.
Asunto(s)
Equipos y Suministros , Cetonas/química , Fenómenos Mecánicos , Gases em Plasma/química , Polietilenglicoles/química , Benzofenonas , Elasticidad , Ensayo de Inmunoadsorción Enzimática , Proteínas Inmovilizadas/metabolismo , Iones , Microscopía Electrónica de Rastreo , Nanotecnología , Nitrógeno/química , Oxígeno/química , Espectroscopía de Fotoelectrones , Polímeros , Resistencia a la Tracción , TropoelastinaRESUMEN
Hexagonal boron nitride (hBN) is a promising material for a range of applications including deep-ultraviolet light emission. Despite extensive experimental studies, some fundamental aspects of hBN remain unknown, such as the type of stacking faults likely to be present and their influence on electronic properties. In this paper, different stacking configurations of hBN are investigated using CASTEP, a pseudopotential density functional theory code. AB-b stacking faults, in which B atoms are positioned directly on top of one another while N atoms are located above the center of BN hexagons, are shown to be likely in conventional AB stacked hBN. Bandstructure calculations predict a single direct bandgap structure that may be responsible for the discrepancies in bandgap type observed experimentally. Calculations of the near edge structure showed that different stackings of hBN are distinguishable using measurements of core-loss edges in X-ray absorption and electron energy loss spectroscopy. AB stacking was found to best reproduce features in the experimental B and N K-edges. The calculations also show that splitting of the 1s to π* peak in the B K-edge, recently observed experimentally, may be accounted for by the presence of AB-b stacking faults.
RESUMEN
We demonstrate that a three dimensional (3D) crystalline tungsten trioxide (WO(3)) nanoporous network, directly grown on a transparent conductive oxide (TCO) substrate, is a suitable working electrode material for high performance electrochromic devices. This nanostructure, with achievable thicknesses of up to 2 µm, is prepared at room temperature by the electrochemical anodization of a RF-sputtered tungsten film deposited on a fluoride doped tin oxide (FTO) conductive glass, under low applied anodic voltages and mild chemical dissolution conditions. For the crystalline nanoporous network with thicknesses ranging from 0.6 to 1 µm, impressive coloration efficiencies of up to 141.5 cm(2) C(-1) are achieved by applying a low coloration voltage of -0.25 V. It is also observed that there is no significant degradation of the electrochromic properties of the porous film after 2000 continuous coloration-bleaching cycles. The remarkable electrochromic characteristics of this crystalline and nanoporous WO(3) are mainly ascribed to the combination of a large surface area, facilitating increased intercalation of protons, as well as excellent continuous and directional paths for charge transfer and proton migration in the highly crystalline material.
RESUMEN
The breakdown of the diamond lattice is explored by ion implantation and molecular dynamics simulations. We show that lattice breakdown is strain-driven, rather than damage-driven, and that the lattice persists until 16% of the atoms have been removed from their lattice sites. The figure shows the transition between amorphous carbon and diamond, with the interfaces highlighted with dashed lines.
Asunto(s)
Diamante/química , Resistencia a la Tracción , Modelos Moleculares , Conformación MolecularRESUMEN
Controlled surface modification of boron nitride nanotubes has been achieved by gentle plasma treatment. Firstly, it was shown that an amorphous surface layer found on the outside of the nanotubes can be removed without damaging the nanotube structure. Secondly, it was shown that an oxygen plasma creates nitrogen vacancies that then allow oxygen atoms to be successfully substituted onto the surface of BNNTs. The percentage of oxygen atoms can be controlled by changing the input plasma energy and by the Ar plasma pre-treatment time. Finally, it has been demonstrated that nitrogen functional groups can be introduced onto the surface of BNNTs using an N(2) + H(2) plasma. The N(2) + H(2) plasma also created nitrogen vacancies, some of which led to surface functionalization while some underwent oxygen healing.
RESUMEN
The cell parameters, bulk moduli and electronic densities-of-states (DOS) of pure and vacancy defect AlN were computed using generalized-gradient approximation (GGA) and hybrid functional (B3LYP) computational methods within both plane wave-pseudopotential and localized Gaussian basis set approaches. All of the methods studied yielded cell parameters and bulk moduli in reasonable agreement with experiment. The B3LYP functional was also found to predict an optical band gap in excellent agreement with experiment. These methods were subsequently applied to the calculation of the geometry, defect state positions and formation energies of the cation (V(Al)) and anion (V(N)) single vacancy defects. For the V(Al) defect, the plane wave-pseudopotential predicted a significant retraction of the neighboring N away from the vacancy, while for the V(N) defect, only slight relaxations of the surrounding Al atoms towards the vacancy were predicted. For the computed DOS of both vacancy defects, the GGA methods yielded similar features and defect level positions relative to the valence band maximum, while the B3LYP method predicted higher separations between the defect levels and the valence and conduction bands, leading to higher energy occupied defect levels.