Analysis of Flutianil and OC56635 Residues in Hemp Cannabis Matrices by LC-MS/MS.

In this paper, we present analytical methodologies for the determination of the thiazolidine fungicide flutianil (trade name GATTEN) and its primary metabolite OC56635 in hemp cannabis matrices. A total of nine crop matrices were tested: whole seed, fiber, flower buds, hemp hearts, hemp seed oil, hemp meal, hemp flour, ethanol extracted CBD resin (CBD-E), and supercritical CO2 extracted CBD resin (CBD-C). Processing of the CBD-E and CBD-C crop fractions was carried out in-house using methods detailed herein. Field sample analysis utilized sequential extractions, stacked solid phase extraction (SPE) column cleanups, and evaporation to prepare the samples for LC-MS/MS quantitation. Method validations for each fraction were carried out using untreated hemp matrices over a minimum of three levels, with lowest levels of method validation (LLMV) of 0.010 µg/g for all fractions except the CBD resins, for which LLMV was 0.020 µg/g. Flutianil-treated samples from nine field sites were collected from several crop production regions and analyzed to determine the distribution of incurred flutianil and OC56635 residues within the different hemp matrices. This data was generated in support of nationwide registration with the United States Environmental Protection Agency (USEPA).

Photosensitized Reactions of a Phenolic Carbonyl from Wood Combustion in the Aqueous Phase-Chemical Evolution and Light Absorption Properties of AqSOA.

Guaiacyl acetone (GA) is a phenolic carbonyl emitted in significant quantities by wood combustion that undergoes rapid aqueous-phase oxidation to produce aqueous secondary organic aerosol (aqSOA). We investigate the photosensitized oxidation of GA by an organic triplet excited state (3C*) and the formation and aging of the resulting aqSOA in wood smoke-influenced fog/cloud water. The chemical transformations of the aqSOA were characterized in situ using a high-resolution time-of-flight aerosol mass spectrometer. Additionally, aqSOA samples collected over different time periods were analyzed using high-performance liquid chromatography coupled with a photodiode array detector and a high-resolution Orbitrap mass spectrometer (HPLC-PDA-HRMS) to provide details on the molecular composition and optical properties of brown carbon (BrC) chromophores. Our results show efficient formation of aqSOA from GA, with an average mass yield around 80%. The composition and BrC properties of the aqSOA changed significantly over the course of reaction. Three generations of aqSOA products were identified via positive matrix factorization analysis of the aerosol mass spectrometry data. Oligomerization and functionalization dominated the production of the first-generation aqSOA, whereas fragmentation and ring-opening reactions controlled the formation of more oxidized second- and third-generation products. Significant formation of BrC was observed in the early stages of the photoreaction, while organic acids were produced throughout the experiment. High-molecular weight molecules (m/z > 180) with high aromaticity were identified via HPLC-PDA-HRMS and were found to account for a majority of the UV-vis absorption of the aqSOA.

Air-Water Partitioning of Biomass-Burning Phenols and the Effects of Temperature and Salinity.

Biomass burning (BB) emits organic gases that, with chemical aging, can form secondary organic aerosol (SOA) in both the gas and aqueous phases. One class of biomass-burning emissions, phenols, are of interest because they react rapidly in the aqueous phase to efficiently form SOA, which might affect climate and human health. However, while measurements exist for the air-water partitioning constants of some simple phenols, Henry's law constants (KH) are unknown for more complex BB phenols. In this work, we use a custom-built apparatus to measure KH for a suite of biomass-burning phenols that span a wide range of air-water partitioning coefficients. Comparing our measurements to predicted values from EPI Suite shows that this model consistently overestimates KH unless a suitable measured phenol KH value is included to adjust the calculations. In addition, we determine the effect of five salts on phenol partitioning by measuring the Setschenow coefficients (KS). Across the eight phenols we examined, values of KS depend primarily on salt identity and descend in the order (NH4)2SO4 > NaCl > NH4Cl ≥ KNO3 > NH4NO3. Lastly, we use our KH and KS results to discuss the aqueous processing of biomass-burning phenols in cloud/fog water versus aerosol liquid water.

Aqueous Photolysis of Benzobicyclon Hydrolysate.

Benzobicyclon [3-(2-chloro-4-(methylsulfonyl)benzoyl)-2-phenylthiobicyclo[3.2.1]oct-2-en-4-one] is a pro-herbicide used against resistant weeds in California rice fields. Persistence of its active product, benzobicyclon hydrolysate, is of concern. As an acidic herbicide, the neutral species photolyzed faster than the more predominant anionic species ( t1/2 = 1 and 320 h, respectively; natural sunlight), from a >10-fold difference in the quantum yield. Dissolved organic matter in natural waters reduced direct photolysis and increased indirect photolysis compared to high-purity water. Light attenuation appears significant in rice field water and can slow photolysis. These results, used in the pesticides in flooded applications model with other experimental properties, indicate that a floodwater hold time of 20 days could be sufficient for dissipation of the majority of initial aqueous benzobicyclon hydrolysate prior to release. However, soil recalcitrance of both compounds will keep aqueous benzobicyclon hydrolysate levels constant months after benzobicyclon application.

Nitrate Photochemistry at the Air-Ice Interface and in Other Ice Reservoirs.

The photolysis of snowpack nitrate (NO3-) is an important source of gaseous reactive nitrogen species that affect atmospheric oxidants, particularly in remote regions. However, it is unclear whether nitrate photochemistry differs between the three solute reservoirs in/on ice: in liquid-like regions (LLRs) in the ice; within the solid ice matrix; and in a quasi-liquid layer (QLL) at the air-ice interface, where past work indicates photolysis is enhanced. In this work, we explore the photoformation of nitrite in these reservoirs using laboratory ices. Nitrite quantum yields, Φ(NO2-), at 313 nm for aqueous and LLR ice samples agree with previous values, e.g., 0.65 ± 0.07% at -10 °C. For ice samples made via flash-freezing solution in liquid nitrogen, where nitrate is possibly present as a solid solution, the nitrite quantum yield is 0.57 ± 0.05% at -10 °C, similar to the LLR results. In contrast, the quantum yield at the air-ice interface is enhanced by a factor of 3.7 relative to LLRs, with a value of 2.39 ± 0.24%. These results indicate nitrate photolysis is enhanced at the air-ice interface, although the importance of this enhancement in the environment depends on the amount of nitrate present at the interface.

Quantum Yield of Nitrite from the Photolysis of Aqueous Nitrate above 300 nm.

Photolysis of nitrate (NO3-) produces reactive nitrogen and oxygen species via three different channels, forming: (1) nitrogen dioxide (NO2) and hydroxyl radical (•OH), (2) nitrite (NO2-) and oxygen atom (O(3P)), and (3) peroxynitrite (ONOO-). These photoproducts are important oxidants and reactants in surface waters, atmospheric drops, and snowpacks. While the efficiency of the first channel, to form NO2, is well documented, a large range of values have been reported for the second channel, nitrite, above 300 nm. In part, this disagreement reflects secondary chemistry that can produce or destroy nitrite. In this study, we examine factors that influence nitrite production and find that pH, nitrate concentration, and the presence of an •OH scavenger can be important. We measure an average nitrite quantum yield (Φ(NO2-)) of (1.1 ± 0.2)% (313 nm, 50 µM nitrate, pH ≥ 5), which is at the upper end of past measurements and an order of magnitude above the smallest-and most commonly cited-value reported for this channel. Nitrite production is often considered a very minor channel in nitrate photolysis, but our results indicate it is as important as the NO2 channel. In contrast, at 313 nm we observe no formation of peroxynitrite, corresponding to Φ(ONOO-) < 0.26%.

A bias in the "mass-normalized" DTT response - an effect of non-linear concentration-response curves for copper and manganese.

The dithiothreitol (DTT) assay is widely used to measure the oxidative potential of particulate matter. Results are typically presented in mass-normalized units (e.g., pmols DTT lost per minute per microgram PM) to allow for comparison among samples. Use of this unit assumes that the mass-normalized DTT response is constant and independent of the mass concentration of PM added to the DTT assay. However, based on previous work that identified non-linear DTT responses for copper and manganese, this basic assumption (that the mass-normalized DTT response is independent of the concentration of PM added to the assay) should not be true for samples where Cu and Mn contribute significantly to the DTT signal. To test this we measured the DTT response at multiple PM concentrations for eight ambient particulate samples collected at two locations in California. The results confirm that for samples with significant contributions from Cu and Mn, the mass-normalized DTT response can strongly depend on the concentration of PM added to the assay, varying by up to an order of magnitude for PM concentrations between 2 and 34 µg mL-1. This mass dependence confounds useful interpretation of DTT assay data in samples with significant contributions from Cu and Mn, requiring additional quality control steps to check for this bias. To minimize this problem, we discuss two methods to correct the mass-normalized DTT result and we apply those methods to our samples. We find that it is possible to correct the mass-normalized DTT result, although the correction methods have some drawbacks and add uncertainty to DTT analyses. More broadly, other DTT-active species might also have non-linear concentration-responses in the assay and cause a bias. In addition, the same problem of Cu- and Mn-mediated bias in mass-normalized DTT results might affect other measures of acellular redox activity in PM and needs to be addressed.

Physicochemical properties of iron oxide nanoparticles that contribute to cellular ROS-dependent signaling and acellular production of hydroxyl radical.

While nanoparticles (NPs) are increasingly used in a variety of consumer products and medical applications, some of these materials have potential health concerns. Macrophages are the primary responders to particles that initiate oxidative stress and inflammatory reactions. Here, we utilized six flame-synthesized, engineered iron oxide NPs with various physicochemical properties (e.g. Fe oxidation state and crystal size) to study their interactions with RAW 264.7 macrophages, their iron solubilities, and their abilities to produce hydroxyl radical in an acellular assay. Both iron solubility and hydroxyl radical production varied between NPs depending on crystalline diameter and surface area of the particles, but not on iron oxidation state. Macrophage treatment with the iron oxide NPs showed a dose-dependent increase of heme oxygenase 1 (HO-1) and NAD(P)H:quinone oxidoreductase (NQO-1). The nuclear factor (NF)-erythroid-derived 2 (E2)-related factor 2 (Nrf2) modulates the transcriptional activity of antioxidant response element (ARE)-driven genes, such as HO-1 and NQO-1. Here, we show that the iron oxide NPs activate Nrf2, leading to its increased nuclear accumulation and enhanced Nrf2 DNA-binding activity in NP-treated RAW 264.7 macrophages. Iron solubility and acellular hydroxyl radical generation depend on the physical properties of the NPs, especially crystalline diameter; however, these properties are weakly linked to the activation of cellular signaling of Nrf2 and the expression of oxidative stress markers. Overall, our work shows for the first time that iron oxide nanoparticles induce cellular marker genes of oxidative stress and that this effect is transcriptionally mediated through the Nrf2-ARE signaling pathway in macrophages.

Hydrogen peroxide formation in a surrogate lung fluid by transition metals and quinones present in particulate matter.

Inhaled ambient particulate matter (PM) causes adverse health effects, possibly by generating reactive oxygen species (ROS), including hydrogen peroxide (HOOH), in the lung lining fluid. There are conflicting reports in the literature as to which chemical components of PM can chemically generate HOOH in lung fluid mimics. It is also unclear which redox-active species are most important for HOOH formation at concentrations relevant to ambient PM. To address this, we use a cell-free, surrogate lung fluid (SLF) to quantify the initial rate of HOOH formation from 10 transition metals and 4 quinones commonly identified in PM. Copper, 1,2-naphthoquinone, 1,4-naphthoquinone, and phenanthrenequinone all form HOOH in a SLF, but only copper and 1,2-naphthoquinone are likely important at ambient concentrations. Iron suppresses HOOH formation in laboratory solutions, but has a smaller effect in ambient PM extracts, possibly because organic ligands in the particles reduce the reactivity of iron. Overall, copper produces the majority of HOOH chemically generated from typical ambient PM while 1,2-naphthoquinone generally makes a small contribution. However, measured rates of HOOH formation in ambient particle extracts are lower than rates calculated from soluble copper by an average (±1σ) of 44 ± 22%; this underestimate is likely due to either HOOH destruction by Fe or a reduction in Cu reactivity due to organic ligands from the PM.