Early Growth and Development and Nonlinear Model Fitting Analysis of Ashidan Yak.

Understanding animal growth plays an important role in improving animal genetics and breeding. In order to explore the early growth and development law of Ashidan yak, the body weight (BW), wither height (WH), body oblique length (BL) and chest girth (CG) of 260 female Ashidan yaks were measured. These individuals grew under grazing conditions, and growth traits were measured at 6, 12, 18 and 30 months of age. Then the absolute growth and relative growth of Ashidan yak were calculated, and five nonlinear models (Logistic model, Gompertz model, Brody model, von Bertalanffy model and Richards model) were used to fit the growth curve of Ashidan yak. The fitting effect of the model was evaluated according to MSE, AIC and BIC. The results showed that the growth rate of Ashidan yak was the fastest from 12 to 18 months old, and the growth was slow or even stagnant from 6 to 12 months old. The AIC and BIC values of the Richards model were the lowest among the five models, with an AIC value of 4543.98 and a BIC value of 4563.19. The Richards model estimated body weight at 155.642 kg. In summary, the growth rate of female Ashidan yak changes with the seasons, growing faster in warm seasons and slower in cold seasons. Richards model is the best model to describe the growth curve of female Ashidan yak in five nonlinear models.

Analysis of Copy Number Variation in the Whole Genome of Normal-Haired and Long-Haired Tianzhu White Yaks.

Long-haired individuals in the Tianzhu white yak population are a unique genetic resource, and have important landscape value. Copy number variation (CNV) is an important source of phenotypic variation in mammals. In this study, we used resequencing technology to detect the whole genome of 10 long-haired Tianzhu white yaks (LTWY) and 10 normal-haired Tianzhu white yaks (NTWY), and analyzed the differences of CNV in the genome of LTWYs and NTWYs. A total of 110268 CNVs were identified, 2006 CNVRs were defined, and the distribution map of these CNVRs on chromosomes was constructed. The comparison of LTWYs and NTWYs identified 80 differential CNVR-harbored genes, which were enriched in lipid metabolism, cell migration and other functions. Notably, some differential genes were identified as associated with hair growth and hair-follicle development (e.g., ASTN2, ATM, COL22A1, GK5, SLIT3, PM20D1, and SGCZ). In general, we present the first genome-wide analysis of CNV in LTWYs and NTWYs. Our results can provide new insights into the phenotypic variation of different hair lengths in Tianzhu white yaks.

Transcriptome-Wide Study of mRNAs and lncRNAs Modified by m6A RNA Methylation in the Longissimus Dorsi Muscle Development of Cattle-Yak.

Cattle-yak is a hybrid F1 generation of cattle and yak, which has a history of more than 3000 years and has shown better production performance and higher economic benefits than those of yaks. However, up to now, there has been no study on the transcriptome-wide m6A methylation profile of bovine skeletal muscle and its potential biological function during muscle development. Here, we observed significant changes in the expression levels of muscle-related marker genes and methylation-related enzymes during the development of cattle-yak, and the overall m6A content in the Longissimus dorsi muscle of 18-month-old cattle-yak decreased significantly. A total of 36,602 peaks, 11,223 genes and 8388 lncRNAs were identified in the two groups, including 2989 differential peaks (427 up-regulated peaks and 2562 down-regulated peaks), 1457 differentially expressed genes (833 up-regulated genes and 624 down-regulated genes) and 857 differentially expressed lncRNAs (293 up-regulated lncRNAs and 564 down-regulated lncRNAs). GO and KEGG analysis revealed that they were significantly enriched in some muscle-related pathways (Wnt signaling pathway and MAPK signaling pathway) and high-altitude adaptation-related pathway (HIF-1 signaling pathway). Moreover, m6A abundance was positively correlated with gene expression levels, while it was negatively correlated with lncRNA expression levels. This indicates that m6A modification played an important role in the Longissimus dorsi muscle development of cattle-yak; however, the regulation mechanism of m6A-modified mRNA and lncRNA may be different. This study was the first report of transcriptome-wide m6A-modified mRNAs and lncRNAs atlas in the Longissimus dorsi muscle development of cattle-yak, one which will provide new perspectives for genetic improvement in bovines.

Resequencing and Signatures of Selective Scans Point to Candidate Genetic Variants for Hair Length Traits in Long-Haired and Normal-Haired Tianzhu White Yak.

Tianzhu white yak is a rare local yak breed with a pure white coat in China. In recent years, breeders have discovered long-haired individuals characterized by long hair on the forehead in the Tianzhu white yak, and the length and density of the hair on these two parts of the body are higher than that of the normal Tianzhu white yak. To elucidate the genetic mechanism of hair length in Tianzhu white yak, we re-sequence the whole genome of long-haired Tianzhu White yak (LTWY) (n = 10) and normal Tianzhu White yak (NTWY) (n = 10). Then, fixation index (F ST), θπ ratio, cross-population composite likelihood ratio (XP-CLR), integrated haplotype score (iHS), cross-population extended haplotype homozygosity (XP-EHH), and one composite method, the de-correlated composite of multiple signals (DCMS) were performed to discover the loci and genes related to long-haired traits. Based on five single methods, we found two hotspots of 0.2 and 1.1 MB in length on chromosome 6, annotating two (FGF5, CFAP299) and four genes (ATP8A1, SLC30A9, SHISA3, TMEM33), respectively. Function enrichment analysis of genes in two hotspots revealed Ras signaling pathway, MAPK signaling pathway, PI3K-Akt signaling pathway, and Rap1 signaling pathway were involved in the process of hair length differences. Besides, the DCMS method further found that four genes (ACOXL, PDPK1, MAGEL2, CDH1) were associated with hair follicle development. Henceforth, our work provides novel genetic insights into the mechanisms of hair growth in the LTWY.

Recycling of fly ash for preparing porous mullite membrane supports with titania addition.

In order to effectively utilize industrial waste fly ash, porous mullite ceramic membrane supports were prepared from fly ash and calcined bauxite with chemically pure titania as sintering additive. The effects of TiO(2) on the sintering behaviors and main properties of porous mullite were studied in detail. Due to the addition of titania, the sintering of the flyash-based mullite was inhibited at low temperatures, but effectively improved at high temperatures, the latter is suitable for preparing porous mullite membrane supports by incomplete sintering. Titania entered into liquid glassy phase with low high-temperature viscosity during sintering, resulting in the improvement of sintering activity, as well as the lowering of secondary mullitization temperature (where 2.0% titania). Between 1300 and 1500 degrees C, with increasing titania content, the samples exhibit increased trends in both linear shrinkage percent and bulk density, but a slightly decreased trend in open porosity, at all sintering temperatures. At 1300-1500 degrees C, the samples sintered at 1450 degrees C for 2h exhibit the lowest shrinkage and bulk density, as well as the highest open porosities in the investigated titania content range of 0-6.0 wt.%. Also, with increasing titania content, the pore size decreases slightly but the three-point flexural strength increases gradually at 1450 degrees C.

Reaction-sintered porous mineral-based mullite ceramic membrane supports made from recycled materials.

Bulk porous mullite supports for ceramic membranes were prepared directly using a mixture of industrial waste fly ash and bauxite by dry-pressing, followed by sintering between 1200 and 1550 degrees C. The effects of sintering temperature on the phase composition and shrinkage percent of porous mullite were studied. The XRD results indicate that secondary mullitization reaction took place above 1200 degrees C, and completed at 1450 degrees C. During sintering, the mixture samples first shrunk, then expanded abnormally between 1326 and 1477 degrees C, and finally shrunk again above 1477 degrees C. This unique volume self-expansion is ascribed to the secondary mullitization reaction between bauxite and fly ash. More especially, the micro-structural variations induced by this self-expansion sintering were verified by SEM, porosity, pore size distribution and nitrogen gas permeation flux. During self-expansion sintering, with increasing temperature, an abnormal increase in both open porosity and pore size is observed, which also results in the increase of nitrogen gas flux. The mineral-based mullite supports with increased open porosity were obtained. Furthermore, the sintered porous mullite membrane supports were characterized in terms of thermal expansion co-efficient and mechanical strength.

Decomposition behavior of M(DPM)n (DPM = 2,2,6,6-tetramethyl-3,5-heptanedionato; n = 2, 3, 4).

The decomposition behavior of M(DPM)n (DPM = 2,2,6,6-tetramethyl-3,5-heptanedionato; M = Sr, Ba, Cu, Sm, Y, Gd, La, Pr, Fe, Co, Cr, Mn, Ce, Zr; n = 2-4) was studied in detail with infrared spectroscopy and mass spectrometry. The results indicated that the chemical bonds in these compounds dissociate generally following the sequence of C-O > M-O > C-C(CH3)3 > C-C and C-H at elevated temperatures. The decomposition processes of M(DPM)n are strongly influenced by the coordination number and central metal ion radius. In addition, the decomposed products, in air atmosphere, varied from metal oxides to metal carbonates associated with different M(DPM)n.

Treatment of phosphate-containing oily wastewater by coagulation and microfiltration.

The oily wastewater generated from pretreatment unit of electrocoating industry contains oils, phosphate, organic solvents, and surfactants. In order to improve the removal efficiencies of phosphate and oils, to mitigate the membrane fouling, coagulation for ceramic membrane microfiltration of oily wastewater was performed. The results of filtration tests show that the membrane fouling decreased and the permeate flux and quality increased with coagulation as pretreatment. At the coagulant Ca (OH)2 dosage of 900 mg/L, the removal efficiency of phosphate was increased from 46.4% without coagulation to 99.6%; the removal of COD and oils were 97.0% and 99.8%, respectively. And the permeate flux was about 70% greater than that when Ca(OH)2 was not used. The permeate obtained from coagulation and microfiltration can be reused as make-up water, and the recommended operation conditions for pilot and industrial application are transmembrane pressure of 0.10 MPa and cross-flow velocity of 5 m/s. The comparison results show that 0.2 microm ZrO2 microfilter with coagulation could be used to perform the filtration rather than conventional ultrafilter, with very substantial gain in flux and removal efficiency of phosphate.

[Effect of coagulation on the performance of microfiltration in treating phosphorus-containing wastewater].

Treatment of high-concentration phosphorus-containing wastewater produced from automobile painting-industry using microfiltration with and without coagulation pretreatment was studied. The results show that the membrane fouling decreased by reducing the extent of pore plugging and improving the shape of cake layer formed on membrane surface and the permeate flux increased with coagulation as pretreatment. In comparison with direct microfiltration (without coagulation), pretreatment with lime improves removal of phosphate from 11.0% to 99.7%. The permeate obtained from coagulation and microfiltration can meet the national discharge standard and be reused under very safe conditions. With the same cleaning method, the recovery of permeate flux is approximately 18% greater than that of without coagulation pretreatment, which may be due to the differences in the shape of deposited cake and the extent of irreversible fouling.