RESUMEN
Recently, lanthanide-based 0D metal halides have attracted considerable attention for their applications in X-ray imaging, light-emitting diodes (LEDs), sensors, and photodetectors. Herein, lead-free 0D gadolinium-alloyed cesium cerium chloride (Gd3+-alloyed Cs3CeCl6) nanocrystals (NCs) are introduced as promising materials for optoelectronic application owing to their unique optical properties. The incorporation of Gd3+ in Cs3CeCl6 (CCC) NCs is proposed to increase the photoluminescence quantum yield (PLQY) from 57% to 96%, along with significantly enhanced phase and chemical stability. The structural analysis is performed by density functional theory (DFT) to confirm the effect of Gd3+ in Cs3Ce1- xGdxCl6 (CCGC) alloy system. Moreover, the CCGC NCs are applied as the active layer in UVPDs with different Gd3+ concentration. The excellent device performance is shown at 20% of Gd3+ in CCGC NCs with high detectivity (7.938 × 1011 Jones) and responsivity (0.195 A W-1) at -0.1 V at 310 nm. This study paves the way for the development of lanthanide-based metal halide NCs for next-generation UVPDs and other optoelectronic applications.
RESUMEN
Quantum dot light-emitting diodes (QLEDs) are promising devices for display applications. Polyethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) is a common hole injection layer (HIL) material in optoelectronic devices because of its high conductivity and high work function. Nevertheless, PEDOT:PSS-based QLEDs have a high energy barrier for hole injection, which results in low device efficiency. Therefore, a new strategy is needed to improve the device efficiency. Herein, we have demonstrated a bilayer-HIL using VO2 and a PEDOT:PSS-based QLED that exhibits an 18% external quantum efficiency (EQE), 78 cd/A current efficiency (CE), and 25,771 cd/m2 maximum luminance. In contrast, the PEDOT:PSS-based QLED exhibits an EQE of 13%, CE of 54 cd/A, and maximum luminance of 14,817 cd/m2. An increase in EQE was attributed to a reduction in the energy barrier between indium tin oxide (ITO) and PEDOT:PSS, caused by the insertion of a VO2 HIL. Therefore, our results could demonstrate that using a bilayer-HIL is effective in increasing the EQE in QLEDs.