RESUMEN
INTRODUCTION: Indices of collateral flow deficit derived from MR perfusion imaging that are predictive of MCA-M1 recanalization after intravenous thrombolysis have been recently reported. Our objective was to test the performance of such MRI-derived collateral flow indices for prediction of recanalization after endovascular thrombectomy. METHODS: Fifty-seven patients with MCA-M1 occlusion evaluated with multimodal MRI prior to thrombectomy were included. Bayesian processing allowed quantification of collateral perfusion indices like the volume of tissue with severely prolonged arterial-tissue delay (>6 s) (VolATD6). Baseline DWI lesion volume was also measured. Correlations with angiographic collateral flow grading and post-thrombectomy recanalization were assessed. RESULTS: VolATD6 < 27 ml or DWI lesion volume <15 ml provide the most accurate diagnosis of excellent collateral supply (p < 0.0001). The combination of VolATD6 > 27 ml and DWI lesion volume >15 ml significantly discriminates recanalizers versus nonrecanalizers (whole cohort, p = 0.032; MERCI cohort (n = 50), p = 0.024). When both criteria are positive, 76.2 % of the patients treated with the MERCI retriever do not fully recanalize (p = 0.024). In multivariate analysis, the aforementioned combined criterion and the angiographic collateral grade are the only independent predictors of recanalization with the MERCI retriever (p = 0.015 and 0.029, respectively). CONCLUSION: Bayesian arterial-tissue delay maps and DWI maps provide a non-invasive assessment of the degree of collateral flow and a combined index that is predictive of MCA-M1 recanalization after endovascular thrombectomy. Further studies are needed to evaluate the accuracy of this index in patients treated with novel stent retriever devices.
Asunto(s)
Revascularización Cerebral/métodos , Imagen de Difusión por Resonancia Magnética/métodos , Interpretación de Imagen Asistida por Computador/métodos , Infarto de la Arteria Cerebral Media/diagnóstico , Infarto de la Arteria Cerebral Media/cirugía , Angiografía por Resonancia Magnética/métodos , Trombectomía/métodos , Anciano , Femenino , Humanos , Imagenología Tridimensional/métodos , Masculino , Imagen Multimodal/métodos , Pronóstico , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Resultado del TratamientoRESUMEN
The medical imaging techniques that allow a three-dimensional (3D) surface rendering reconstruction, which is usually required by the clinician when dealing with scoliotic patients, are computed tomography (CT) and stereoradiography. However, CT cannot provide a 3D rendering of the whole spine because of the high irradiating dose, while the stereoradiographic 3D reconstruction techniques, which use an algorithm derived from the direct linear transformation (DLT), are usually limited in accuracy because of the small number of corresponding anatomical landmarks identifiable on both radiographs. The purpose of the present study is to validate a recent biplanar 3D surface rendering reconstruction technique on scoliotic vertebrae. This technique, called "non stereo-corresponding points" (NSCP), has already been tested on non-pathologic dry cervical vertebrae and frozen lumbar specimens, and the results have proved very encouraging. Since scoliosis is a 3D deformity of the vertebrae and of the global spine, such a technique could be a very useful clinical tool for the diagnostic, follow-up and surgical planning when dealing with scoliotic patients. The validation of the NSCP technique on scoliotic patients was performed on 58 scoliotic vertebrae in 14 patients, by comparison with the CT scan 3D rendering technique. The results of this study show mean errors of 1.5 mm. On the basis of this study, we can conclude that the NSCP 3D reconstruction technique is a definite improvement over existing techniques, and can serve as a useful diagnosis tool in scoliosis. However, the results of the technique still need to be optimized for use in geometrical modeling.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional , Modelos Anatómicos , Escoliosis/diagnóstico por imagen , Columna Vertebral/diagnóstico por imagen , Adolescente , Adulto , Niño , Femenino , Humanos , RadiografíaRESUMEN
The purpose of the present study is to validate a quite recent stereoradiographic 3D reconstruction technique, called Non Stereo Corresponding Points (NSCP), on scoliotic patients. The validation of the NSCP technique on scoliotic patients was performed on 59 scoliotic vertebrae from 14 patients, by comparison to the CT scan. The results of this study show mean errors of 1.5 mm. These results should still be optimized for the geometrical modelling. Nevertheless, this technique may already be used as a diagnosis tool in clinics.
Asunto(s)
Intensificación de Imagen Radiográfica/métodos , Intensificación de Imagen Radiográfica/normas , Escoliosis/diagnóstico por imagen , Adolescente , Adulto , Niño , Femenino , Humanos , Reproducibilidad de los Resultados , Escoliosis/patologíaRESUMEN
Many authors have already pointed out the importance of the three dimensional aspect when dealing with pelvic and spinal pathologies. The purpose of the present study is to verify the feasibility on the pelvis and the accuracy of a recent 3D reconstruction technique based on biplanar X Rays with regard to direct measurements. The results on 8 dry non-pathologic pelvises show a mean error of 3.9 mm for the global geometry of the pelvis, with local maxima of 26 mm and 95% of errors inferior to 14.5 mm.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/instrumentación , Procesamiento de Imagen Asistido por Computador/métodos , Pelvis/anatomía & histología , Anciano , Anciano de 80 o más Años , Femenino , Humanos , MasculinoRESUMEN
Specific behaviour of the scoliotic spine has already been proven. The aim of this preliminary study is to evaluate if this behaviour is mainly due to geometrical deformities or to mechanical characteristics of soft tissues. We use a kriging technique to obtain a personalized finite element model of scoliotic spine from 3D reconstructions and from an existing detailed model of normal spine. To evaluate if deformed geometry has a share in specific behaviour of scoliotic spine, numerical simulations were performed on an apical segments extracted from normal and scoliotic models and the results were compared. Average mechanical properties of normal spine were considered in both models.
Asunto(s)
Modelos Biológicos , Escoliosis/fisiopatología , Columna Vertebral/fisiología , Columna Vertebral/fisiopatología , HumanosRESUMEN
Several 3D reconstruction techniques deriving from stereoradiographic DLT have been presented during the last 15 years, but these techniques have usually been limited in accuracy because of the small number of corresponding anatomical landmarks identified on both radiographs. A new technique has recently been proposed to perform 3D reconstruction of the spine using not only the stereo-corresponding anatomical landmarks (seen on both frontal and sagittal X-ray films) but also some non-stereo-corresponding ones. This technique (called non-stereo-corresponding points or NSCP) has already been used for cervical dry vertebrae. In the present study, we focus on the validation of this technique for lumbar vertebrae by comparing four techniques: direct measurement, CT scan, 3D reconstruction by stereoradiography using a direct linear transformation (DLT) algorithm and the NSCP technique. The accuracy of the NSCP technique was also evaluated on different vertebral regions. The global results show mean errors of 1.1 mm and maximum of 7.8 mm with regard to direct measurements. These mean errors are close to those obtained using 3D reconstructions from CT scan using 1 mm cuts.