Selective Separation and Preconcentration of Caffeine from Natural and Pharmaceutical Products using New Polyurethane Foams

Abstract Two polyurethane foam-based sorbents (PUF) were synthesized by imprinting and grafting techniques and examined for selective separation and preconcentration of caffeine (CAF) in some pharmaceutical products and in black tea. Molecularly imprinted PUF was synthesized based on hydrogen-bonding interactions between CAF and alizarin yellow G (AYG) and subsequent polymerization into PUF. The static experiments indicated optimum sorption conditions at pH=6.5 and 5.5 for imprinted PUF (AY-IPUF) and grafted PUF (AY-GPUF), respectively. In the online experiments, the suitable preconcentration time was found to be 40 and 20s for (AY-IPUF) and (AY-GPUF), respectively, at a flow rate of 1.75 mL.min-1. Desorption of CAF has been affected by passing 500 µL of 0.05, 0.01 mol.L−1 HCl eluent onto (AY-IPUF) and (AY-GPUF), respectively. The online methods have provided satisfactory enrichment factors of 8.4 and 10.5 for (AY-IPUF) and (AY-GPUF), respectively. The time consumed for preconcentartion, elution and determination steps was 1.48 and 1.05 min, thus, the throughput was 42 and 57 h-1, for (AY-IPUF) and (AY-GPUF), respectively. The developed sorbents were studied for the determination of CAF in pharmaceutical samples which will be helpful to minimize caffeinism. Finally, in silico bioactivity, ADMET and drug-likeness predictive computational studies of caffeine were also carried out

Effect of chitosan nanoparticles on microtensile bond strength of resin composite to dentin: an in vitro study / Efeito de nanopartículas de quitosana na resistência a união por microtração da resina composta à dentina: um estudo in vitro

Objective: The purpose of this study was to evaluate the effect of chitosan nanoparticles on microtensile bond strength of resin composite to dentin using self etch adhesive after aging. Material and Methods: A total number of 90 freshly extracted, sound human molar teeth. Flat tooth surface was gained after cut of the occlusal surface. Three main groups according to pretreatment of dentin before adhesive application; 0.2 % chitosan, 2.5 % chitosan and no treatment control group. Universal self etch adhesive were applied according to manufacture instruction and 4 mm of Feltik Z250 xt composite. Storage of specimens for 1 day, 3 months and 6 months in 37O C distilled water. After that, the tooth was sectioned to beams of 1 mm x8 mm sticks for microtensile bond strength test using universal testing machine. Scanning electron microscope (SEM) was used to evalute the effect of chitosan nanoparticles on dentin and smear layer. Kruskal-Wallis test was used to compare between the three groups as well as the three aging periods. Dunn's test was used for pair-wise comparisons. The significance level was set at P ≤ 0.05. Results: chitosan 0.2% is statistically significant increase in bond strength than chitosan 2.5% and control in one day group. Three months chitosan 0.2 % groups have statistically significant increase in bond strength than chitosan 2.5%. It was found in 6 months that control and chitosan 0.2 % have statistically significant increase in bond strength than chitosan 2.5%. There was statistically significant difference found between the three studied groups regarding bond strength at different storage times . Conclusion: Microtensile bond strength was influenced by different chitosan concentration. Different aging periods had no effect on the microtensile bond strength without application of chitosan and with application of 2.5% chitosan concentration. (AU)

Introdução: O objetivo deste estudo foi avaliar o efeito das nanopartículas de quitosana na resistência da microtração de união do compósito de resina à dentina usando adesivo autocondicionante após o envelhecimento. Material e Métodos: Foram utilizados um total de 90 dentes molares humanos extraídos e sadios. A superfície plana do dente foi obtida após o corte da superfície oclusal. Os dentes foram divididos em três grupos principais de acordo com o pré-tratamento da dentina e antes da aplicação do adesivo: 0,2% de quitosana, 2,5% de quitosana e nenhum tratamento foi utilizado no grupo controle. O adesivo autocondicionante universal foi aplicado de acordo com as instruções do fabricante e 4 mm de composito Feltik Z250 xt foi inserido. O armazenamento de amostras foi realizado por 1 dia, 3 meses e 6 meses em água destilada a 37 °C. Depois disso, o dente foi seccionado em peças de 1 mm x 8 mm para teste de resistência de união por microtração, utilizando máquina de teste universal. Microscópio eletrônico de varredura (MEV) foi usado para avaliar o efeito das nanopartículas de quitosana na dentina e na camada de smear layer. O teste de Kruskal-Wallis foi utilizado para comparar os três grupos e os três períodos de envelhecimento. O teste de Dunn foi usado para comparação pareada dos grupos. O nível de significância foi estabelecido em P ≤ 0,05. (AU)