Novel high-efficient adsorbent based on modified gelatin/montmorillonite nanocomposite for removal of malachite green dye.

Shortage of drinking water has gained potential interest over the last few decades. Discharged industrial effluent, including various toxic pollutants, to water surfaces is one of the most serious environmental issues. The adsorption technique has become a widely studied method for the removal of toxic pollutants, specifically synthetic dyes, from wastewater due to its cost-effectiveness, high selectivity, and ease of operation. In this study, a novel gelatin-crosslinked-poly(acrylamide-co-itaconic acid)/montmorillonite (MMT) nanoclay nanocomposites-based adsorbent has been prepared for removing malachite green (MG) dye from an aqueous solution. Modified gelatin nanocomposites were synthesized using a free-radical polymerization technique in the presence and absence of MMT. Various analytical instrumentation: including FTIR, FESEM, XRD, and TEM techniques were used to elucidate the chemical structure and surface morphology of the prepared samples. Using a batch adsorption experiment, Langmuir isotherm model showed that the prepared modified gelatin nanocomposite had a maximum adsorption capacity of 950.5 mg/g using 350 mg/L of MG dye at pH 9 within 45 min. Furthermore, the regeneration study showed good recyclability for the obtained nanocomposite through four consecutive reusable cycles. Therefore, the fabricated gelatin nanocomposite is an attractive adsorbent for MG dye elimination from aqueous solutions.

Tosyl-carrageenan/alginate composite adsorbent for removal of Pb2+ ions from aqueous solutions.

The current study effectively designed novel cross-linked tosyl-carrageenan/alginate (Ts-Car/Alg) beads to remove Pb2+ ions from their aqueous solutions. To confirm the structure of the produced matrix, characterization methods such as XRD, SEM, FTIR, and EDX were used. Batch experiments were employed in order to further evaluate the adsorption efficiency of Pb2+ ions. Additionally, various variables, including contact time, solution pH, adsorbent dosage, and initial concentration of Pb2+ ions were investigated using atomic absorption. The results of this study showed that the adsorption equilibrium increased as Pb2+ ions concentration increased at pH = 5.3 after a contact time of 120 min, with 0.3 g of Ts-Car/Alg that having the best adsorption capacity at 74 mg/g. The adsorption progression was further examined using the kinetic and isothermal models. With a correlation coefficient of 0.975, the Freundlich model was thought to better fit Pb2+ ions adsorption from the isotherm investigation. Also, the adsorption kinetics were investigated using a pseudo-second-order model with 1/n ratio of 0.683. This Ts-Car/Alg adsorbent is regarded as an effective candidate to be used for water treatment because the reusability process of produced beads was successfully completed twice, and the adsorbent maintained its ability to remove Pb2+ ions. The prepared Ts-Car/Alg beads are therefore excellent candidates to be used as potent Pb2+ ions adsorbents from their aqueous solutions. The Ts-Car/Alg beads' regeneration and reusability investigation for the removal of heavy metal ions was completed in at least two successful cycles.

Synthesis of biodegradable antimicrobial pH-sensitive silver nanocomposites reliant on chitosan and carrageenan derivatives for 5-fluorouracil drug delivery toward HCT116 cancer cells.

The current research relies on a one-pot green biosynthesis of silver nanoparticles (SNPs) with various ratios of silver (Ag) in the existence of N, N, N-trimethyl chitosan chloride (TMC) and carboxymethyl kappa-carrageenan (CMKC), to investigate the effectiveness of the synthesized silver nanocomposites (SNCs) as pH sensitive biodegradable carrier for orally intestinal delivery of 5-fluorouracil (5-FU) drug. FTIR, XRD, TEM and FE-SEM/EDX methods were utilized to demonstrate the structure of the prepared polyelectrolyte complex PEC (TMC/CMKC) and SNCs (TMC/CMKC/Ag). The results showed that the 5-FU encapsulation effectiveness inside all of the prepared SNCs samples was improved by increasing the concentration of Ag, reaching 92.16 ± 0.57 % with 3 % Ag. In vitro release behavior of 5-FU loaded SNC 3 % (TMC/CMKC/Ag 3 %), displayed slow and sustained release reaching 96.3 ± 0.81 % up to 24 h into pH 7.4 medium. The successful release of 5-FU from the loaded SNC 3 % was confirmed through occurrence of strong cytotoxicity, with an IC50 value of 31.15 µg/ml, and high % of apoptotic cells (30.66 %) within the treated HCT116 cells. Besides, SNC 3 % showed good biodegradability and antimicrobial properties against different bacterial strains. Overall, SNC 3 % can be suggested as an effective system for both controlled drug delivery and antibacterial action.

Development of hydrogel based on Carboxymethyl cellulose/poly(4-vinylpyridine) for controlled releasing of fertilizers.

A novel Carboxymethyl cellulose (CMC) and poly (4-vinylpyridine) (P4VP) hydrogel system is synthesized with different ratios, in the presence of cross-linker N, N,- methylene bis-acrylamide (MBA). The hydrogel is characterized via FTIR spectroscopy, thermal gravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The FTIR results showed a strong interaction between both CMC, P4VP and the loaded fertilizer. The water uptake of the hydrogel was evaluated by swelling tests under variations in pH, biodegradability was investigated in soil to simulate real-world conditions. To determine the best release behavior of urea and calcium nitrate from the hydrogel, fertilizers were loaded with different ratios onto the hydrogel during its formation. Fertilizers release was followed by Atomic absorption spectroscopy to study the release of calcium nitrate and urea. Release kinetic parameters were obtained based on different mathematical models as Zero order, First order, Korsmeyer-Peppas and Higuchi models. The suitable proportionality between the mathematical models used and the fertilizers release was determined based on the correlation coefficients (R2). According to Zero order model urea release showed independent concentration. Based on Korsmeyer-Pappas and Higuchi models with high n value and R2 equals to 0.97. Compared to urea, Ca2+, Zero order and Higuchi have been ignored due to their poor correlation coefficients values as proportion with Ca2+ fertilizer release.

Eco-friendly and biodegradable sodium alginate/quaternized chitosan hydrogel for controlled release of urea and its antimicrobial activity.

Hydrogels could be employed in agriculture for efficient management of water and controlled-release urea (CRU). This study aimed to synthesize a superabsorbent hydrogel for CRU by cross-linking sodium alginate (Alg) and N-(2-hydroxy-3-trimethyl ammonium) propyl chitosan chloride (HTACC). The hydrogel structure was characterized by various techniques, and the urea loading and releasing behaviors of the synthetic hydrogels were investigated. The results revealed that the maximum urea loading ranged between 107 and 200%, and that the urea loading kinetics fitted with Langmuir model followed by the Freundlich model. The urea release behavior reached equilibrium after 30 days and urea releasing kinetics fitted with the zero-order and Higuchi models. The synthesized hydrogels exerted significant antimicrobial activities and molecular docking showed their binding affinity toward glucosamine-6-phosphate synthase, ß-lactamase II, TraR binding site and nucleoside diphosphate kinase. In conclusion, these Alg/HTACC hydrogels showed swelling, urea release, and antimicrobial properties suitable to meet the plant requirements and produce economic and environmental benefits.

One-pot green synthesis of antimicrobial chitosan derivative nanocomposites to control foodborne pathogens.

Food contamination by foodborne pathogens is considered a serious problem worldwide. This study aimed to show the efficacy of the one-pot green biosynthesis of nanocomposites as effective antimicrobial agents based on a water-soluble biodegradable polysaccharide and silver nitrate (AgNO3). Silver (Ag) nanoparticles were synthesized using different concentrations of AgNO3 solution (1, 2, and 3 mM) in the presence of N-quaternized chitosan and N,N,N-trimethyl chitosan chloride (TMC) as both a reducing and stabilizing agent. In addition, the structure of TMC/Ag nanocomposites was confirmed using different analytical tools including FTIR, UV-Vis, XRD, HR-TEM, FE-SEM, and EDX techniques. The FTIR spectra and UV-Vis spectra showed the main characteristic absorption peaks of Ag nanoparticles. In addition, FE-SEM images showed the formation of spherical bead-like particles on the surface of TMC. Correspondingly, the EDX spectrum showed a peak for silver, indicating the successful synthesis of Ag nanoparticles inside the TMC chains. Moreover, HR-TEM images exhibited the good distribution of Ag nanoparticles, which appeared as nano-spherical shapes. The antimicrobial activity of TMC/Ag nanocomposites was examined against three foodborne pathogens, including Salmonella Typhimurium as a Gram-negative bacterium, Bacillus subtilis as a Gram-positive bacterium and Aspergillus fumigatus as a fungus. The results showed that TMC/Ag nanocomposites had better antimicrobial activity compared with TMC alone and their antimicrobial activity increased with an increase in the concentration of Ag. The results confirmed that the TMC/Ag nanocomposites can be potentially used as an effective antimicrobial agent in food preservation.

Green synthesis of quaternized chitosan/silver nanocomposites for targeting mycobacterium tuberculosis and lung carcinoma cells (A-549).

Lung cancer (LC) is the most-deadly type of cancer representing a major public health problem worldwide. Tuberculosis TB is another infectious disease influencing lungs that causes death especially in developing countries. The present study is the first to report antimycobacterial activity of TMC/Ag nanocomposite. It aims to solve the case of lung cancer and its most associative pathogen. The current study reports one pot green biosynthesis of silver nanocomposite in presence of biodegradable biopolymer (N,N,N-trimethyl chitosan chloride, TMC) as both reducing and stabilizing agent. The structure of TMC/Ag nanocomposite was characterized with different analysis tools including TEM, XRD and UV-vis spectrophotometer techniques. TEM images showed that Ag nanoparticles were well distributed spheres and their diameter ranged from 11 to17.5 nm. While, XRD pattern of TMC/Ag nanocomposite showed diffraction peaks related to the crystalline nature of Ag nanoparticles. In addition, UV-vis spectrum revealed a broad absorption peak at 400 nm attributing to the surface Plasmon resonance (SPR) of Ag. TMC/Ag nanocomposite exhibited a promising in vitro antimycobacterial activity with MIC of 1.95 µg/mL. On the other hand, The antitumor activity results of nanocomposites against both lung carcinoma cells (A-549) and normal lung cells (WI 38) revealed that nanocomposite cytotoxicity against A-549 cells with IC50 of 12.3 µg/mL, whereas the IC50 value against normal WI 38 cells was 357.2 µg/mL.

Crystal violet dye removal using crosslinked grafted xanthan gum.

As water is the most important source for survival for all individuals around the world, water pollution via synthetic toxic dyes and microorganisms is considered as a serious worldwide environmental problem. The present work aimed to synthesize crosslinked grafted xanthan gum (XG) films with poly (N-vinyl imidazole), PVI, for both removing crystal violet (CV) dye and inhibiting Escherichia coli (E. coli) growth. XG-grafted-PVI was prepared using potassium persulfate as an initiator to give different percentage of graft yield and using N, N'-methylene bisacrylamide (MBA) as a crosslinking agent. The structure of grafted XG films was elucidated via various analysis tools including FTIR, XRD, FE-SEM and EDX. Results of CV adsorption studies showed that maximum CV removal was 99.7% (625 mgg-1) which was achieved at: 95% GY, 2.5% MBA, 40 mg of adsorbent into 50 mL of 500 mgL-1 CV dye solution, pH 7, temperature (30 °C) and adsorption time (7 h). Also, results fitted well with Langmuir isotherm model. Moreover, pseudo-first order and intraparticle diffusion model participated in the mechanism of CV adsorption on grafted XG surface, in addition to its efficient recycling ability. Furthermore, antibacterial activities results of crosslinked grafted XG revealed their high inhibiting effect for E.coli growth.

Encapsulation of bovine serum albumin within novel xanthan gum based hydrogel for protein delivery.

Aim of the present study is to investigate synthesis of novel hydrogel as a potential protein carrier, intended for controlled release formulation. The hydrophilic bovine serum albumin (BSA) was chosen as a model protein to be encapsulated within xanthan gum (XG)/poly (N­vinyl imidazole (PVI) hydrogel. Both XG/PVI hydrogel and XG/PVI/BSA matrix structures were elucidated via different analysis tools such as FTIR, XRD, FE-SEM and EDX. Both BSA loading and release profiles were determined. Cytotoxicity of XG/PVI hydrogel was investigated against normal cell line (VERO cells). The obtained results revealed that % Drug (BSA) loading (% DL) and Encapsulation Efficiency (% EE) increased with increasing both gelation time and loaded BSA concentration, while %DL and %EE decreased with increasing the polymer concentration. The maximum value of %DL and %EE was 59.50% and 99.17%, respectively. Results of in-vitro BSA release in PBS showed that increase in the polymer (XG and PVI) concentrations led to increase in BSA release. Kinetic studies of the in-vitro release of BSA from XG/PVI/BSA matrix followed non-Fickian and case II transport mechanism. Moreover, Cytotoxicity results showed good biocompatibility of this novel hydrogel. SDS-PAGE analysis confirmed that the structural integrity of BSA was not affected by the encapsulation or release conditions. Consequently, this novel hydrogel can be used as an efficient BSA carrier for protein delivery.

Synthesis of novel grafted hyaluronic acid with antitumor activity.

In our study, we aimed to synthesize novel grafted hyaluronic acid with cationic biodegradable polymer, poly (N-vinyl imidazole) (PVI), through free radical polymerization using potassium persulfate as initiator. The effect of various grafting factors including initiator and monomer concentrations, reaction time and temperature was studied on the percentage of grafting parameters such as; graft yield (% GY), grafting efficiency (% GE) and amount of homopolymer formation (% H). Maximum grafted HA was% GY = 235% and%GE = 83% obtained on optimum conditions at [In] = 17.5 mmol L-1, [M] = 1.25 mol L-1, Temp. = 50 °C, time = 1.5 h and [HA] = 0.025 mol L-1. The structure of grafted HA (HA-g-PVI) was elucidated via various analysis tools such as; elemental analyses, FTIR, 1H NMR, XRD, TGA and Field emission scanning electron microscopy (FE-SEM). Hepatic and breast cancers are two common cancer types threatening people worldwide, so, the antitumor activity of two grafted HA samples (% GY = 155% and 235%) was studied against hepatic cancer (HepG-2) and breast cancer cell lines (MCF-7) compared to unmodified HA and PVI. The results showed that antitumor activity of grafted samples was more than unmodified HA and increased with increasing the grafting percentage of PVI onto HA chains, also, the antitumor activity of tested samples against HepG-2 cell lines was higher than MCF-7 cell lines.

Green synthesis of antimicrobial and antitumor N,N,N-trimethyl chitosan chloride/poly (acrylic acid)/silver nanocomposites.

The present study is imported to solve two critical problems we face in our daily life which are microbial pollution and colon cancer. One pot green synthesis of a water soluble polyelectrolyte complex (PEC) between cationic polysaccharide as N,N,N-trimethyl chitosan chloride (TMC) and anionic polymer as poly (acrylic acid) (PAA) in presence of silver nanoparticles to yield (TMC/PAA/Ag) nanocomposites with different Ag weight ratios. Structure of TMC, PAA and TMC/PAA (PEC) were proved via different analysis tools. TMC/PAA and its Ag nanocomposites are used as antimicrobial agents against different pathogenic bacteria and fungi to solve microbial pollution. TMC/PAA-Silver nanocomposites had the highest antimicrobial activity which increases with increasing Ag %. Cytotoxicity data confirmed also that TMC/PAA/Ag (3%) had the most cytotoxic effect (the less cell viability %) towards colon cancer. TMC/PAA (PEC) was formed through electrostatic interactions between N-quaternized (-N+R3) groups in TMC and carboxylate (-COO-) groups in PAA.

Synthesis of novel biodegradable antibacterial grafted xanthan gum.

Xanthan gum (XG) is natural polysaccharides used in food industries as stabilizers and thickener agents. The problem is that some food products are found to be contaminated by pathogenic bacteria such as Escherichia coli (E. coli) and Staphyloccus aureus (S. aureus) that reduce their shelf life. This research aims to synthesize biodegradable antibacterial XG-grafted-poly(N-vinyl imidazole) PVI and the effect of reaction parameters were studied on grafting yield (G), grafting efficiency (GE), total conversion (TC) and homopolymer (H) %. XG-g-PVI was characterized via various analysis tools. Thermal analysis showed that grafted XG was more thermally stable than unmodified XG and their stability increased with increasing PVI%. XG-g-PVI was acting as antibacterial agent against (E. coli and S. aureus) bacteria that cause food borne diseases. Their activity increases with increasing grafting yield%. Surface morphology showed change from irregular lobules shape in XG to smooth surface in its graft with PVI.

Cytotoxicity and metal ions removal using antibacterial biodegradable hydrogels based on N-quaternized chitosan/poly(acrylic acid).

Physically crosslinked hydrogels resulted from interaction between N,N,N-trimethyl chitosan chloride (N-Quaternized Chitosan) (NQC) and poly(acrylic acid) (PAA) were synthesized in different weight ratios (3:1), (1:1) and (1:3) taking the following codes Q3P1, Q1P1 and Q1P3, respectively. Characterization of the mentioned hydrogels was done using several analysis tools including; FTIR, XRD, SEM, TGA, biodegradation in simulated body fluid (SBF) and cytotoxicity against HepG-2 liver cancer cells. FTIR results proved that the prepared hydrogels were formed via electrostatic and H-bonding interactions, while XRD patterns proved that the prepared hydrogels -irrespective to their ratios- were more crystalline than both matrices NQC and PAA. TGA results, on the other hand, revealed that Q1P3 hydrogel was the most thermally stable compared to the other two hydrogels (Q3P1 and Q1P1). Biodegradation tests in SBF proved that these hydrogels were more biodegradable than the native chitosan. Examination of the prepared hydrogels for their potency in heavy metal ions removal revealed that they adsorbed Fe (III) and Cd (II) ions more than chitosan, while they adsorbed Cr (III), Ni (II) and Cu (II) ions less than chitosan. Moreover, testing the prepared hydrogels as antibacterial agents towards several Gram positive and Gram negative bacteria revealed their higher antibacterial activity as compared with NQC when used alone. Evaluating the cytotoxic effect of these hydrogels on an in vitro human liver cancer cell model (HepG-2) showed their good cytotoxic activity towards HepG-2. Moreover, the inhibition rate increased with increasing the hydrogels concentration in the culture medium.

Synthesis, characterization and application of biodegradable crosslinked carboxymethyl chitosan/poly(vinyl alcohol) clay nanocomposites.

Crosslinked poly(vinyl alcohol) (PVA)/carboxymethyl chitosan (CMCh) nanocomposites were synthesized using terephthaloyl diisothiocyanate crosslinker, in the presence of montmorillonite (MMT), in different ratios of the two matrices. Characterization of nanocomposites was performed using different analyses. Swelling behavior was studied in different buffered solutions. It was found that formation of crosslinked CMCh/PVA hydrogels increased the swellability. Metal ion adsorption has also been investigated. The results indicated that crosslinked CMCh adsorbs various metal ions much more than non crosslinked CMCh. Antimicrobial activity was examined against Gram positive bacteria, against Gram negative bacteria, and also against fungi. Results indicated that most of these nanocomposites exhibited good antimicrobial potency. Degradation study was carried out in Simulated Body Fluid (SBF) for different time periods in order to find out degradation index (Di). Results showed that weight loss of most of the nanocomposites increased as a function of incubation time.

Synthesis, characterization and applications of N-quaternized chitosan/poly(vinyl alcohol) hydrogels.

Hydrogels composed of N-quaternized chitosan (NQC) and poly(vinyl alcohol) (PVA) in different weight ratios (1:3), (1:1) and (3:1) chemically crosslinked by glutaraldehyde in different weight ratios ­ 1.0 and 5.0% ­ have been prepared. The prepared hydrogels were characterized via several analysis tools such as: Fourier transform IR (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and thermogravimetric analysis (TGA). Different applications have been done on NQC/PVA hydrogels including; metal ions uptake, swellability in different buffer solutions (pH: 4, 7 and 9), swellability and degradation studies in simulated body fluid (SBF) solutions and antimicrobial activity towards bacteria and fungi. The results indicated that crosslinked NQC/PVA hydrogels with glutaraldehyde (GA) are more thermallystable than non crosslinked hydrogels, NQC/PVA hydrogels swell highly in different buffer solutions as PVA content increases and the antimicrobial activity of NQC/PVA hydrogels is higher than NQC itself.

Synthesis and characterization of antimicrobial crosslinked carboxymethyl chitosan nanoparticles loaded with silver.

Carboxymethyl chitosan (CMCh)-silver nanoparticle (Ag) hydrogels with high antibacterial activity against three Gram +ve bacteria (Staphylococcus aureus, Bacillus subtilis and Streptococcus faecalis), three Gram -ve bacteria (Escherichia coli, Pseudomonas aeruginosa and Neisseria gonorrhoeae) and a Candida albicans fungus were prepared. The in situ preparation reaction involved crosslinking of CMCh with epichlorohydrin in alkaline medium containing silver nitrate to yield silver nanoparticles loaded CMCh hydrogel giving pale brown or darker hydrogels when the silver content increases. FTIR spectroscopy, SEM and TEM were done for the prepared hydrogels. Silver nanoparticles hydrogels exhibited higher antimicrobial activity than virgin CMCh. TEM analysis showed the small size of the prepared hydrogels to be in the range of 9-16nm in size.

Synthesis and characterization of some novel antimicrobial thiosemicarbazone O-carboxymethyl chitosan derivatives.

Three novel thiosemicarbazone O-carboxymethyl chitosan derivatives were obtained via a condensation reaction of thiosemicarbazide O-carboxymethyl chitosan with o-hydroxybenzaldehyde, p-methoxybenzaldehyde, and p- chlorobenzaldehyde respectively. Their structures were characterized by elemental analysis, FTIR, (13)C NMR and X-ray diffraction. The antimicrobial behaviors of the prepared derivatives against three types of bacteria Staphylococcus aureus (S. aureus, RCMBA 2004), Bacillus subtilis (B. subtilis, RCMBA 6005), and Escherichia coli (E. Coli, RCMBA 5003) and three crops-threatening pathogenic fungi Aspergillus fumigatus (A. fumigatus, RCMBA 06002), Geotrichum candidum (G. candidum, RCMB 05098), and Candida albicans (C. albicans, RCMB 05035) were investigated. The results indicated that the antibacterial and antifungal activities of the investigated derivatives are much higher than those of the parent O-carboxymethyl chitosan. They were more potent in case of Gram-positive bacteria than Gram-negative bacteria. The presence of electron withdrawing chlorine atom on the aryl moiety of the aldehyde portion improved greatly antimicrobial activity to be nearly equivalent to the used standard drugs.

Synthesis and characterization of carboxymethyl chitosan nanogels for swelling studies and antimicrobial activity.

Nanogels of a binary system of carboxymethyl chitosan (CMCh) and poly- (vinyl alcohol) PVA, were successfully synthesized by a novel in situ process. They were also characterized by various analytical tools like Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and X-ray diffraction (XRD). They were studied for their unique swelling properties in water and different pH solutions. They were also investigated for their great ability to capture or isolate bacteria and fungi from aquatic environments.

Novel antimicrobial organic thermal stabilizer and co-stabilizer for rigid PVC.

Biologically active N-benzoyl-4-(N-maleimido)-phenylhydrazide (BMPH) was synthesized and its structure was confirmed by elemental analysis and various spectral tools. It was examined as a thermal stabilizer and co-stabilizer for rigid poly (vinyl chloride) at 180 °C in air. Blending BMPH with reference samples in different ratios greatly lengthens the thermal stability value and improves the extent of discoloration of PVC. TGA confirmed the improved stability of PVC in presence of the investigated organic stabilizer. GPC measurements were done to investigate the changes occurred in the molecular masses of the degraded samples of blank PVC and PVC in presence of the novel stabilizer. BMPH showed good antimicrobial activity towards two kinds of bacteria and two kinds of fungi.

Synthesis, characterization and application of enrofloxacin complexes as thermal stabilizers for rigid poly(vinyl chloride).

Synthesis and characterization of both binary Co(II)- (1), Ni(II)- (2) complexes with enrofloxacin drug (HL(1)) and ternary Co(II)- (3), Ni(II)- (4) complexes in presence of DL-alanine (H(2)L(2)) are reported using physico-chemical techniques. The antimicrobial activity of these complexes has been screened against two gram-positive and two gram-negative bacteria. Antifungal activity against two different fungi has been evaluated and compared with reference drug. All the binary and ternary complexes showed remarkable potential antimicrobial activity higher than the recommended standard agents. Ni(II)-complexes exhibited higher potency as compared to the parent drug against bacterial and fungal strain. In addition, it was of interest to investigate the reported complexes as thermal stabilizers and co-stabilizers for rigid PVC in air at 180 °C. Their high stabilizing efficiency is detected by their high induction period values (T(s)) compared with some of the common reference stabilizers used industrially, such as dibasic lead carbonate (DBLC) and calcium-zinc soap. Blending these complexes with some of the reference stabilizers in different ratios had a synergistic effect on both induction period as it gave better thermal stability and lower extent of discoloration. The stabilizing efficiency is attributed at least partially to the ability of the metal complex stabilizer to be incorporated in the polymeric chains, thus disrupting the chain degradation and replace the labile chlorine atoms on PVC chains by a relatively more s moiety of the inorganic stabilizer. Their amenability to use as a biomedical additives for PVC, has afforded them great potential for various medical applications.