RESUMEN
Mg-based biodegradable metallic implants are gaining increased attraction for applications in orthopedics and dentistry. However, their current applications are hampered by their high rate of corrosion, degradation, and rapid release of ions and gas bubbles into the physiological medium. The aim of the present study is to investigate the osteogenic and angiogenic potential of coated Mg-based implants in a sheep cranial defect model. Although their osteogenic potential was studied to some extent, their potential to regenerate vascularized bone formation was not studied in detail. We have studied the potential of magnesium-calcium (MgCa)-based alloys modified with zinc (Zn)- or gallium (Ga)-doped calcium phosphate (CaP) coatings as a strategy to control their degradation rate while enhancing bone regeneration capacity. MgCa and its implants with CaP coatings (MgCa/CaP) as undoped or as doped with Zn or Ga (MgCa/CaP + Zn and MgCa/CaP + Ga, respectively) were implanted in bone defects created in the sheep cranium. MgCa implants degraded faster than the others at 4 weeks postop and the weight loss was ca. 50%, while it was ca. 15% for MgCa/CaP and <10% in the presence of Zn and Ga with CaP coating. Scanning electron microscopy (SEM) analysis of the implant surfaces also revealed that the MgCa implants had the largest degree of structural breakdown of all the groups. Radiological evaluation revealed that surface modification with CaP to the MgCa implants induced better bone regeneration within the defects as well as the enhancement of bone-implant surface integration. Bone volume (%) within the defect was ca. 25% in the case of MgCa/CaP + Ga, while it was around 15% for undoped MgCa group upon micro-CT evaluation. This >1.5-fold increase in bone regeneration for MgCa/CaP + Ga implant was also observed in the histopathological examination of the H&E- and Masson's trichrome-stained sections. Immunohistochemical analysis of the bone regeneration (antiosteopontin) and neovascularization (anti-CD31) at the defect sites revealed >2-fold increase in the expression of the markers in both Ga- and Zn-doped, CaP-coated implants. Zn-doped implants further presented low inflammatory reaction, notable bone regeneration, and neovascularization among all the implant groups. These findings indicated that Ga- and Zn-doped CaP coating is an important strategy to control the degradation rate as well as to achieve enhanced bone regeneration capacity of the implants made of Mg-based alloys.
Asunto(s)
Aleaciones , Fosfatos de Calcio , Materiales Biocompatibles Revestidos , Galio , Magnesio , Osteogénesis , Cráneo , Zinc , Animales , Zinc/química , Zinc/farmacología , Ovinos , Cráneo/efectos de los fármacos , Cráneo/patología , Cráneo/lesiones , Osteogénesis/efectos de los fármacos , Magnesio/farmacología , Galio/química , Galio/farmacología , Aleaciones/química , Aleaciones/farmacología , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Fosfatos de Calcio/química , Fosfatos de Calcio/farmacología , Regeneración Ósea/efectos de los fármacos , Calcio/metabolismo , Implantes AbsorbiblesRESUMEN
Adipose-derived mesenchymal stromal cells (ASC) transplant to recover the optimal tissue structure/function relationship is a promising strategy to regenerate tissue lesions. Because filling local tissue defects by injection alone is often challenging, designing adequate cell carriers with suitable characteristics is critical for in situ ASC delivery. The aim of this study was to optimize the generation phase of a platelet-lysate-based fibrin hydrogel (PLFH) as a proper carrier for in situ ASC implantation and (1) to investigate in vitro PLFH biomechanical properties, cell viability, proliferation and migration sustainability, and (2) to comprehensively assess the local in vivo PLFH/ASC safety profile (local tolerance, ASC fate, biodistribution and toxicity). We first defined the experimental conditions to enhance physicochemical properties and microscopic features of PLFH as an adequate ASC vehicle. When ASC were mixed with PLFH, in vitro assays exhibited hydrogel supporting cell migration, viability and proliferation. In vivo local subcutaneous and subgingival PLFH/ASC administration in nude mice allowed us to generate biosafety data, including biodegradability, tolerance, ASC fate and engraftment, and the absence of biodistribution and toxicity to non-target tissues. Our data strongly suggest that this novel combined ATMP for in situ administration is safe with an efficient local ASC engraftment, supporting the further development for human clinical cell therapy.
Asunto(s)
Hidrogeles , Células Madre Mesenquimatosas , Animales , Ratones , Humanos , Hidrogeles/química , Medicina Regenerativa , Tejido Adiposo/metabolismo , Fibrina/metabolismo , Ratones Desnudos , Distribución Tisular , Diferenciación CelularRESUMEN
Cancer survivors may experience long-term adverse effects of cancer treatments such as premature ovarian failure and infertility. We aimed to investigate the potential effects and toxicity of bortezomib (BTZ) as an effective anticancer drug on ovaries, raise awareness to the negative consequences of the treatment, and help increase the quality of life after treatment. Mice were distributed into bortezomib (BTZ1, BTZ2) and saline-injected control groups (C1, C2) at a dose of 1 mg/kg twice per week for 6 weeks. We sacrificed C1, BTZ1 groups at day 1 and C2, BTZ2 groups at 4 weeks after the last injection. Ovary samples were examined using histopathological and immunohistochemical methods. Ovarian follicle impairment was detected on BTZ-treated mice and was associated with a statistically significant decreased population of primordial and antral follicles compared with control groups. In experimental groups, Caspase-3 and Ki67 expressions were increased, whereas estrogen receptor alpha (ERα) and progesterone receptor (PR) expressions were decreased in various developmental stages of follicles. BTZ specifically targets granulosa cells by inducing granulosa cell apoptosis and may have long-term effects on follicles. Bortezomib treatment may adversely affect ovarian function by accelerating ovarian reserve depletion and changing ERα and PR hormone levels that can cause fertility problems in the long term.
Asunto(s)
Receptor alfa de Estrógeno , Ovario , Animales , Bortezomib/metabolismo , Bortezomib/toxicidad , Receptor alfa de Estrógeno/metabolismo , Femenino , Ratones , Folículo Ovárico , Calidad de VidaRESUMEN
Effective skeletal muscle tissue engineering relies on control over the scaffold architecture for providing muscle cells with the required directionality, together with a mechanical property match with the surrounding tissue. Although recent advances in 3D printing fulfill the first requirement, the available synthetic polymers either are too rigid or show unfavorable surface and degradation profiles for the latter. In addition, natural polymers that are generally used as hydrogels lack the required mechanical stability to withstand the forces exerted during muscle contraction. Therefore, one of the most important challenges in the 3D printing of soft and elastic tissues such as skeletal muscle is the limitation of the availability of elastic, durable, and biodegradable biomaterials. Herein, we have synthesized novel, biocompatible and biodegradable, elastomeric, segmented polyurethane and polyurethaneurea (TPU) copolymers which are amenable for 3D printing and show high elasticity, low modulus, controlled biodegradability, and improved wettability, compared to conventional polycaprolactone (PCL) and PCL-based TPUs. The degradation profile of the 3D printed TPU scaffold was in line with the potential tissue integration and scaffold replacement process. Even though TPU attracts macrophages in 2D configuration, its 3D printed form showed limited activated macrophage adhesion and induced muscle-like structure formation by C2C12 mouse myoblasts in vitro, while resulting in a significant increase in muscle regeneration in vivo in a tibialis anterior defect in a rat model. Effective muscle regeneration was confirmed with immunohistochemical assessment as well as evaluation of electrical activity produced by regenerated muscle by EMG analysis and its force generation via a custom-made force transducer. Micro-CT evaluation also revealed production of more muscle-like structures in the case of implantation of cell-laden 3D printed scaffolds. These results demonstrate that matching the tissue properties for a given application via use of tailor-made polymers can substantially contribute to the regenerative outcomes of 3D printed tissue engineering scaffolds.
Asunto(s)
Elastómeros , Poliuretanos , Animales , Ratones , Músculo Esquelético , Impresión Tridimensional , RatasRESUMEN
Biomolecule carrier structures have attracted substantial interest owing to their potential utilizations in the field of bone tissue engineering. In this study, MOF-embedded electrospun fiber scaffold for the controlled release of BMP-6 was developed for the first time, to enrich bone regeneration efficacy. The scaffolds were achieved by first, one-pot rapid crystallization of BMP-6 encapsulated ZIF-8 nanocrystals-as a novel carrier for growth factor molecules- and then electrospinning of the blending solution composed of poly (ε-caprolactone) and BMP-6 encapsulated ZIF-8 nanocrystals. BMP-6 molecule encapsulation efficiency for ZIF-8 nanocrystals was calculated as 98%. The in-vitro studies showed that, the bioactivity of BMP-6 was preserved and the release lasted up to 30 days. The release kinetics fitted the Korsmeyer-Peppas model exhibiting a pseudo-Fickian behavior. The in-vitro osteogenesis studies revealed the superior effect of sustained release of BMP-6 towards osteogenic differentiation of MC3T3-E1 pre-osteoblasts. In-vivo studies also revealed that the sustained slow release of BMP-6 was responsible for the generation of well-mineralized, new bone formation in a rat cranial defect. Our results proved that; MOF-carriers embedded in electrospun scaffolds can be used as an effective platform for bone regeneration in bone tissue engineering applications. The proposed approach can easily be adapted for various growth factor molecules for different tissue engineering applications.
Asunto(s)
Células Madre Mesenquimatosas , Estructuras Metalorgánicas , Implantes Absorbibles , Animales , Proteína Morfogenética Ósea 2 , Proteína Morfogenética Ósea 6 , Regeneración Ósea , Diferenciación Celular , Osteogénesis , Ratas , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Bortezomib, an inhibitor of 26S proteasome, is an anti-cancer therapeutic agent used in different cancer types. It leads to the arrest of the cancerous cell cycle by inhibiting angiogenesis and inducing apoptosis. Liver is the vital organ for detoxification and excretion of toxic products. The treatment with chemotherapy is a challenge, drugs are used to destroy cancer cells, but healthy cells can be affected during cancer treatment as well. The main objective of this study was to analyze the histopathological and biochemical effects of bortezomib on liver. Twenty-four female C57BL/6 mice were distributed into 4 groups, bortezomib injected treatment groups (Btz1, Btz2) and saline injected control groups (C1, C2). Bortezomib and saline were treated twice per week for 6 weeks and sacrificed at the end of one day (Btz1, C1) and 4 weeks (Btz2, C2) after the last injection. Liver samples were examined for histopathological analysis and the serum samples processed for biochemical analysis. Tissue samples were fixed, routinely processed, sectioned, and stained with Hematoxylin and Eosin (H&E). Periodic Acid-Schiff (PAS), Sudan Black staining and Masson's trichrome histochemical staining methods were performed to characterize the lesions. Histopathological analysis of the Btz1 and Btz2 groups revealed acute hepatic morphological changes such as hepatocellular swelling (cloudy swelling), necro-inflammatory reaction, and increased mononuclear polyploidy. Based on the negative staining with PAS and Sudan Black staining, hepatocellular swelling was diagnosed as hydropic degeneration. Necro-inflammatory reaction observed in the form of acute hepatitis was composed of mainly mononuclear cell infiltration accompanied by multifocal necrotic foci. Kupffer cell proliferation was observed in parallel with degenerative and necrotic changes. An Increase in hepatocellular mononuclear polyploidy visualized as hepatocytes with a single enlarged nucleus was detected in all liver sections of Btz1 and Btz2 groups. Individual cases of cholestasis (n = 1) and mild hepatic fibrosis (n = 1) were also reported. Significant elevated levels of alanine aminotransferase (ALT), aspartate transaminase (AST), alkaline phosphatase (ALP) and gamma-glutamyl transferase (GGT) were detected in bortezomib treated groups. Few clinical cases reported liver injury related to bortezomib used for cancer treatment. However, the liver was not considered as a target for bortezomib treatment. Our data suggesting that bortezomib caused liver damage and induces elevations in serum levels. The reported hepatic lesions including hepatocellular swelling, acute hepatitis and mononuclear polyploidy were mainly mild and moderate in severity. The increase of polyploidy in liver tissue of mice treated with bortezomib in this study was explained as a reaction of the liver facing the drug-induced hepatic damage. The mechanism leading to the hepatotoxicity of bortezomib treatment is not known but the production of a toxic metabolite through its metabolism in the liver can be suggested. Moreover, no recovery was also observed in histopathological and biochemical analyses suggesting that the bortezomib effect is non-reversible four weeks after the drug was withdrawn. Patients should be informed about the possibility of acute drug-induced hepatitis and hepatotoxicity of this chemotherapeutic agent after the treatment.(AU)