RESUMEN
UNLABELLED: This article demonstrates resolution recovery in 18F SPECT image reconstruction by using an iterative algorithm that corrects for the system geometric response. METHODS: Patient and phantom studies were performed using a Picker PRISM 3000 three-detector SPECT system (Picker International, Inc., Cleveland, OH) to image 18F with 511 keV collimators. A measured point response function of the imaging system was used in an iterative reconstruction algorithm in which the projector and backprojector modeled the system point response function by using an efficient layer-by-layer blurring technique. The blurring function was a five-element kernel in the shape of a cross. The iterative reconstruction algorithm was an ordered-subset maximum-likelihood expectation maximization algorithm. RESULTS: The iterative reconstruction algorithm with geometric response correction showed an improvement in resolution over the filtered backprojection reconstruction and the iterative reconstruction without correction. CONCLUSION: The proposed iterative reconstruction algorithm with geometric response correction is efficient and effective with significant resolution recovery.
Asunto(s)
Algoritmos , Radioisótopos de Flúor , Procesamiento de Imagen Asistido por Computador/métodos , Tomografía Computarizada de Emisión de Fotón Único/métodos , Anciano , Encéfalo/diagnóstico por imagen , Femenino , Fluorodesoxiglucosa F18 , Corazón/diagnóstico por imagen , Humanos , Masculino , Persona de Mediana Edad , Fantasmas de Imagen , Radiofármacos , Tomografía Computarizada de Emisión de Fotón Único/instrumentaciónRESUMEN
By combining conjugate views, truncation-free attenuation profiles of patients can be obtained by using slant hole collimators on three-headed SPECT systems. The alterations in reconstruction algorithms necessary for use with slant hole collimators and potential image artifacts are discussed. Based on an evaluation of the size of objects that can be imaged without truncation and the size of the overlap region in the conjugate views, a 15 degrees slant angle was determined to be optimal. Studies with a 30 degrees slant hole collimator verified the ability of slant hole transmission imaging to provide accurate, truncation-free attenuation maps of a 56 cm lateral width phantom. The center of rotation was determined to be dependent on the slant angle and radius of rotation of the slant collimator. These studies also demonstrated that the spatial resolution in the transaxial plane of the attenuation maps depends on radius of rotation of the slant hole collimator, but does not depend on the radius of rotation of an uncollimated transmission source. A multiline transmission source was investigated for use with estimating the attenuation map in Tc-99m labeled sestamibi perfusion imaging.
Asunto(s)
Corazón/diagnóstico por imagen , Fantasmas de Imagen , Tomografía Computarizada de Emisión de Fotón Único/instrumentación , Tomografía Computarizada de Emisión de Fotón Único/métodos , Diseño de Equipo , Humanos , Masculino , Matemática , Probabilidad , Tecnecio Tc 99m SestamibiRESUMEN
BACKGROUND: Significant hepatobiliary accumulation of technetium 99m-labeled cardiac perfusion agents has been shown to cause alterations in the apparent localization of the agents in the cardiac walls. A Monte Carlo study was conducted to investigate the hypothesis that the cardiac count changes are due to the inconsistencies in the projection data input to reconstruction, and that correction of the causes of these inconsistencies before reconstruction, or including knowledge of the physics underlying them in the reconstruction algorithm, would virtually eliminate these artifacts. METHODS AND RESULTS: The SIMIND Monte Carlo package was used to simulate 64 x 64 pixel projection images at 128 angles of the three-dimensional mathematical cardiac-torso (MCAT) phantom. Simulations were made of (1) a point source in the liver, (2) cardiac activity only, and (3) hepatic activity only. The planar projections and reconstructed point spread functions (PSFs) of the point source in the liver were investigated to study the nature of the inconsistencies introduced into the projections by imaging, and how these affect the distribution of counts in the reconstructed slices. Bull's eye polar maps of the counts at the center of the left ventricular wall of filtered back-projection (FBP) and maximum-likelihood expectation-maximization (MLEM) reconstructions of projections with solely cardiac activity, and with cardiac activity plus hepatic activity scaled to have twice the cardiac concentration, were compared to determine the magnitude and location of apparent changes in cardiac activity when hepatic activity is present. Separate simulations were made to allow the investigation of stationary spatial resolution, distance-dependent spatial resolution, attenuation, and scatter. The point source projections showed significant inconsistencies as a function of projection angle with the largest effect being caused by attenuation. When consistent projections were simulated, no significant impact of hepatic activity on cardiac counts was noted with FBP, or 100 iterations of MLEM. With inconsistent projections, reconstruction of 180 degrees resulted in greater apparent cardiac count losses than did 360 degrees reconstruction for both FBP and MLEM. The incorporation of attenuation correction in MLEM reconstruction reduced the changes in cardiac counts to that seen in simulations in which attenuation was not included, but resulted in increased apparent localization of activity in the posterior wall of the left ventricle when scatter was present in the simulated images. CONCLUSIONS: The apparent alterations in cardiac counts when significant hepatic localization is present is due to the inconsistency of the projections inherent in imaging. Prior correction of these, or accounting for them in the reconstruction algorithm, will virtually eliminate them as causes of artifactual changes in localization. Attenuation correction and scatter correction are both required to overcome the major sources of apparent count changes in the heart associated with hepatic uptake.
Asunto(s)
Artefactos , Corazón/diagnóstico por imagen , Hígado/diagnóstico por imagen , Compuestos de Tecnecio , Tomografía Computarizada de Emisión de Fotón Único , Simulación por Computador , Humanos , Masculino , Método de Montecarlo , Fantasmas de ImagenRESUMEN
In this paper a method of modeling the distribution of scattered events in emission projection data is developed and applied. This method is based on the use of a transmission map to define the inhomogeneous scattering object. The key point is the use of the set of line integrals calculated as part of the attenuation correction technique, as the basis of a model of the distribution of scattered events. The probability of a photon being scattered through a given angle and being detected in the emission energy window is approximated using a Gaussian function. The parameters of this Gaussian are determined using Monte Carlo generated parallel-beam scatter line spread functions from a nonuniformly attenuating phantom. The model is incorporated into a two-dimensional projector-backprojector and used with the Expectation-Maximization-Maximum-Likelihood algorithm for the reconstruction of fan-beam phantom data. The correction is shown to perform well for a phantom that varies slowly in the axial direction. For the more clinically realistic situation of a torso phantom, the method produces improvements in terms of blood pool to myocardium contrast, but does not restore the contrast to the level exhibited in a reconstruction from "scatter free" data.
Asunto(s)
Método de Montecarlo , Fantasmas de Imagen , Tomografía Computarizada de Emisión de Fotón Único/métodos , Humanos , Matemática , Modelos Teóricos , Dispersión de Radiación , Tecnecio , Tomografía Computarizada de Emisión de Fotón Único/instrumentaciónRESUMEN
UNLABELLED: The objective of this work was to determine the potential clinical usefulness of SPECT to image 511-keV annihilation photons. METHODS: A triple-headed gamma camera equipped with ultra-high-energy collimators was used to image 18F. Sensitivity measurements were carried out and the FWHM and FWTM were determined in air and for a unit-density scattering medium. Additionally, tomographic phantom studies were acquired to evaluate image quality. RESULTS: The sensitivities of the three cameras were, for all practical purposes, identical. At a source-to-collimator distance of 100 mm, the FWHM and FWTM were 13 and 29 mm, respectively. A tomographic phantom study demonstrated that spheres with a diameter of 20 mm were well resolved when filled with 18F activity and placed inside a water-filled phantom. CONCLUSION: The triple-headed SPECT camera in this investigation is a practical means of acquiring tomographic 18F images. The reconstructed slices were of sufficient quality to be of value in some clinical studies.
Asunto(s)
Radioisótopos de Flúor , Procesamiento de Imagen Asistido por Computador , Tomografía Computarizada de Emisión de Fotón Único , Cámaras gamma , Humanos , Modelos Estructurales , Sensibilidad y Especificidad , Tomografía Computarizada de Emisión de Fotón Único/instrumentación , Tomografía Computarizada de Emisión de Fotón Único/métodosRESUMEN
Investigation of convergent-beam single photon emission computed tomography (SPECT) is actively being pursued to evaluate its clinical potentials. Fan-beam, cone-beam, pin-hole and astigmatic collimators are being used with rotating gamma cameras having large crystal areas, to increase the sensitivity for emission and transmission computed tomography of small organs such as the thyroid, brain or heart. With new multi-detector SPECT systems, convergent-beam geometry offers the ability to simultaneously obtain emission and transmission data necessary to quantify uptake of radiopharmaceutical distributions in the heart. The development of convergent-beam geometry in SPECT requires the integration of hardware and software. In considering hardware, the optimum detector system for cone-beam tomography is a system that satisfies the data sufficiency condition for which the scanning trajectory intersects any plane passing through the reconstructed region of interest. However, the major development of algorithms has been for the data insufficient case of single planar orbit acquisitions. The development of these algorithms have made possible the preliminary evaluation of this technology and the imaging of brain and heart are showing significant potential for the clinical application of cone-beam tomography. Presently, significant research activity is pursuing the development of algorithms for data acquisitions that satisfy the data sufficiency condition and that can be implemented easily and inexpensively on clinical SPECT systems.
Asunto(s)
Tomografía Computarizada de Emisión de Fotón Único/métodos , Encéfalo/diagnóstico por imagen , Corazón/diagnóstico por imagen , Humanos , Modelos Estructurales , Tomografía Computarizada de Emisión de Fotón Único/instrumentaciónRESUMEN
The authors evaluated cone beam single-photon emission-computed tomography (SPECT) of the heart. A new cone beam reconstruction algorithm was used to reconstruct data collected from "short scan" acquisitions (of slightly more than 180 degrees) of a detector anteriorally traversing a noncircular orbit. The less than 360 degrees acquisition was used to minimize the attenuation artifacts that result from reconstructing posterior projections of 201T1 emissions from the heart. The algorithm includes a new method for reconstructing truncated projections of background tissue activity that eliminates reconstruction ring artifacts. Phantom and patient results are presented which compare a high-resolution cone beam collimator (50-cm focal length; 6.0-mm full width at half maximum [FWHM] at 10 cm) to a low-energy general purpose (LEGP) parallel hole collimator (8.2-mm FWHM at 10 cm) which is 1.33 times more sensitive. The cone beam tomographic results are free of reconstruction artifacts and show improved spatial and contrast resolution over that obtained with the LEGP parallel hole collimator. The limited angular sampling restrictions and truncation problems associated with cone beam tomography do not deter from obtaining diagnostic information. However, even though these preliminary results are encouraging, a thorough clinical study is still needed to investigate the specificity and sensitivity of cone beam tomography.
Asunto(s)
Corazón/diagnóstico por imagen , Tomografía Computarizada de Emisión de Fotón Único/métodos , Algoritmos , Dipiridamol , Procesamiento Automatizado de Datos/métodos , Prueba de Esfuerzo , Filtración/instrumentación , Humanos , Matemática , Modelos Estructurales , Radioisótopos de Talio , Tomografía Computarizada de Emisión de Fotón Único/instrumentaciónRESUMEN
The cause of 180-degree diametrical artifactual defects in clinical thallium-201 SPECT imaging was investigated using phantom simulation. This artifact was observed on SPECT images acquired with a "body contour" or "peanut" orbit. It was hypothesized that this artifact was caused by differences in spatial resolution that occur when the heart-to-detector distance changes employing noncircular orbits. To test this hypothesis, a series of planar static images of a normal cylindrical phantom was obtained at varying distances from the camera detector head. From these images, tomographic acquisition files were created that simulated tomographic data acquired with circular orbits and elliptical orbits. The reconstructed phantom short-axis slices showed no artifacts for circular orbits. However, for various elliptical orbits, significant regional nonuniformity, similar to the artifacts noted in patients, was observed. The degree of nonuniformity correlated with the long-short axis ratio of elliptical orbits (r = 0.98). In addition, circular orbits with the phantom in an eccentric position resulted in similar nonuniformities. It is concluded that a noncircular tomographic orbit can create characteristic artifacts on thallium-201 SPECT images. For rotational thallium 201 SPECT, a circular orbit with the heart in the center of rotation should be employed.
Asunto(s)
Enfermedad Coronaria/diagnóstico por imagen , Radioisótopos de Talio , Tomografía Computarizada de Emisión de Fotón Único , Humanos , Modelos Estructurales , Tecnología RadiológicaRESUMEN
There is currently a widespread consensus on the importance of monitoring patient radiation exposures during radiographic examinations. Diagnostic facilities under federal jurisdiction already legislate maximum patient exposure limits for various diagnostic radiologic examinations, while an increasing number of state legislatures have instituted such regulations. Compliance requires that institutions be capable of assessing each patient's entrance exposures. A method is proposed that would facilitate the acquisition of such patient exposure information in a relatively straightforward and accurate manner, requiring a minimum number of measurements and access to a suitable programmable calculator. A standardized set of exposure measurements obtained on an accurately calibrated three-phase radiographic unit has been fitted by an analytic function. The average accuracy of the fit between the limits of 40-140 kVp and 2.5- to 6.0-mm aluminum filtration was 0.3%. The concept of linear scaling was employed to allow the analytic function to accurately reproduce the exposure outputs of different radiographic units. Validation experiments on patients indicated that an overall accuracy of 10% can be expected when using well-calibrated radiographic equipment. The method described permits institutions to verify their compliance with federal and/or state regulations and to confirm that their radiation exposures are consistent with national averages.