Enhancing the efficiency of magnetically driven carbon nitride-based nanocomposites with magnetic nanoflowers for the removal of methylene blue dye at neutral pH.

The present study focuses on the elaboration of magnetic nanocomposites by the in situ incorporation of magnetite (Fe3O4) nanoparticles (NPs) with spherical and nanoflower-like morphologies in graphitic carbon nitride (g-C3N4) sheets using two different synthetic routes. Nanomaterials are characterized by TEM, SEM, XRD, FTIR, BET, zetametry, vibrating sample magnetometry, and UV-vis absorption spectroscopy. The decoration of the carbon nitride matrix with the magnetic NPs enhanced optical and textural properties. The influence of the morphology of the magnetic NPs on the adsorptive and photocatalytic properties of the nanocomposites under different pH conditions (4.5, 6.9, and 10.6) was assessed from batch tests to remove methylene blue (MB) from aqueous solutions. In extreme pH conditions, the nanocomposites exhibited lower or equivalent MB removal capacity compared to the pure g-C3N4. However, at neutral medium, the nanocomposite with incorporated Fe3O4 nanoflowers showed a significantly higher removal efficiency (80.7%) due to the combination of a high adsorption capacity and a good photocatalytic activity in this pH region. The proposed nanocomposite is a promising alternative to remove cationic dyes from water by magnetic assistance, since no pH adjustment of the polluted effluent is required, reducing costs and environmental impact in the dyeing industry.

Liposomal paclitaxel induces apoptosis, cell death, inhibition of migration capacity and antitumoral activity in ovarian cancer.

The main goal of this study is to evaluate the efficacy of the paclitaxel (PTX) drug formulated with a liposomal nanosystem (L-PTX) in a peritoneal carcinomatosis derived from ovarian cancer. In vitro cell viability studies with the human ovarian cancer line A2780 showed a 50% decrease in the inhibitory concentration for L-PTX compared to free PTX. A2780 cells treated with the L-PTX formulation demonstrated a reduced capacity to form colonies in comparison to those treated with PTX. Cell death following L-PTX administration hinted at apoptosis, with most cells undergoing initial apoptosis. A2780 cells exhibited an inhibitory migration profile when analyzed by Wound Healing and real-time cell analysis (xCELLigence) methods after L-PTX administration. This inhibition was related to decreased expression of the zinc finger E-box-binding homeobox 1 (ZEB1) and transforming growth factor 2 (TGF-ß2) genes. In vivoL-PTX administration strongly inhibited tumor cell proliferation in ovarian peritoneal carcinomatosis derived from ovarian cancer, indicating higher antitumor activity than PTX. L-PTX formulation did not show toxicity in the mice model. This study demonstrated that liposomal paclitaxel formulations are less toxic to normal tissues than free paclitaxel and are more effective in inhibiting tumor cell proliferation/migration and inducing ZEB1/TGF-ß2 gene expression.

Combined paclitaxel-doxorubicin liposomal results in positive prognosis with infiltrating lymphocytes in lung metastasis.

Aim: To investigate the effect of liposomes containing the classical cytotoxic drugs paclitaxel and doxorubicin (Lipo-Pacli/Dox), against a metastatic breast cancer model. We also investigated if Lipo-Pacli/Dox was capable of reverting the tolerogenic environment of metastatic lesions. Materials & methods: Immunogenic cell death induction by the Pacli/Dox combination was assessed in vitro. Antitumor activity and in vivo safety of Lipo-Pacli/Dox were evaluated using a 4T1 breast cancer mouse model Results: Lipo-Pacli/Dox, with a size of 189 nm and zeta potential of -5.01 mV, promoted immune system activation and partially controlled the progression of pulmonary metastasis. Conclusion: Lipo-Pacli/Dox was useful to control both primary tumor and lung metastasis in breast cancer (4T1) mice model. Additionally, Lipo-Pacli/Dox acts as an immunological modulator for this metastatic breast cancer model.

Acute reproductive toxicology after intratesticular injection of silver nanoparticles (AgNPs) in Wistar rats.

This study aimed to evaluate the effects of an intratesticular injection of silver nanoparticles (AgNPs) on reproductive parameters and health of rats, and to evaluate the AgNPs biodistribution in order to develop a nanotechnological contraceptive agent for male animals. Treated animals received 220 µL of AgNPs solution (0.46 µg-Ag/ml) in each testicle and were euthanized: seven, 14, 28, and 56 days after injection. A significant decrease (p < 0.05) in the percentage of motile sperm in D7 (8.8%) was observed, comparing to the control (73.3%), D14 (86.0%), D28 (68.2%), and D56 (90.0%) groups. D7 group also presented a decrease (p < 0.05) in the percentage of normal spermatozoa. Additionally, D7 group showed an increase (p < 0.05) in abnormal midpiece and sperm head morphology compared to the Control group. Seminiferous tubules presented all germline cell types and spermatozoa for all groups. However, D7 group did not present spermatozoa in the epididymis, whereas some spermatozoa and cellular debris were visible in D14 and D28 groups. All animals presented hematological parameters, creatinine, and alanine aminotransferase values within the normal limits for Wistar rats. The percentage of silver found in the liver was always higher than in the other organs analyzed. A pioneering mathematical model is proposed, from which the half-life time of silver in the liver (17 days), spleen (23 days), lungs (30 days), and kidneys (35 days) was extracted. In conclusion, some acute and severe toxic effects were observed in sperm cells following intratesticular injection of AgNPs, although these effects were reversible. No adverse effects to general animal health were observed.

Polyphosphate Poly(amine) Nanoparticles: Self-Assembly, Thermodynamics, and Stability Studies.

The interaction of polyamine poly(allylamine hydrochloride) with Na3PO4, Na4P2O7, Na5P3O10, Na6P6O18, and (NaPO3)26 salts and the formation of polyamine phosphate nanoparticles (PANs) are studied here. Dynamic light scattering, isothermal titration calorimetry (ITC), electrophoretical mobility measurements, atomic force microscopy, and transmission electron microscopy are used to explore the formation, stability, and pH sensitivity of PANs. An optimal concentration for PAN formation is found for each phosphate salt in terms of the most stable size and lowest polydispersity index of the nanoparticles. The minimal concentration of phosphate ions for PAN formation decreases with the increasing number of phosphate groups per phosphate salt. ITC measurements show that all polyphosphates display a characteristic endothermic peak, which is not present when monophosphates are used for PAN formation. pH stability of PANs depends on the type of phosphate salt. PANs formed with small phosphates show a small window of stability with pH from 8 to 9, while those formed with long phosphates are stable in more acidic pH environments. Our findings open multiple possibilities for fine-tuning the pH sensitivity of PANs by varying phosphate salts for potential applications in drug delivery.

Novel magneto-responsive nanoplatforms based on MnFe2O4 nanoparticles layer-by-layer functionalized with chitosan and sodium alginate for magnetic controlled release of curcumin.

Remotely assisted drug delivery by means of magnetic biopolymeric nanoplatforms has been utilized as an important tool to improve the delivery/release of hydrophobic drugs and to address their low cargo capacity. In this work, MnFe2O4 magnetic nanoparticles (MNPs) were synthesized by thermal decomposition, coated with citrate and then functionalized with the layer-by-layer (LbL) assembly of polyelectrolyte multilayers, with chitosan as polycation and sodium alginate as polyanion. Simultaneous conductimetric and potentiometric titrations were employed to optimize the LbL deposition and to enhance the loading capacity of nanoplatforms for curcumin, a hydrophobic drug used in cancer treatment. ~200 nm sized biopolymer platforms with ~12 nm homogeneously embedded MNPs were obtained and characterized by means of XRD, HRTEM, DLS, TGA, FTIR, XPS and fluorescence spectroscopy techniques to access structural, morphological and surface properties, to probe biopolymer functionalization and to quantify drug-loading. Charge reversals (±30 mV) after each deposition confirmed polyelectrolyte adsorption and a stable LbL assembly. Magnetic interparticle interaction was reduced in the biopolymeric structure, hinting at an optimized performance in magnetic hyperthermia for magneto-assisted drug release applications. Curcumin was encapsulated, resulting in an enhanced payload (~100 µg/mg). Nanocytotoxicity assays showed that the biopolymer capping enhanced the biocompatibility of nanoplatforms, maintaining entrapped curcumin. Our results indicate the potential of synthesized nanoplatforms as an alternative way of remotely delivering/releasing curcumin for medical purposes, upon application of an alternating magnetic field, demonstrating improved efficiency and reduced toxicity.

Trapping, pattern formation, and ordering of polyelectrolyte/single-wall carbon nanotube complexes at the air/water and air/solid interfaces.

The Langmuir and Langmuir-Blodgett (LB) techniques have been applied in a novel approach to build structurally well-ordered, oriented, and organized assemblies of water-soluble single-wall carbon nanotubes (ws-SWCNTs) at the air/water and air/solid interfaces. The SWCNTs were rendered hydrophilic by complexing them with a quenched polyelectrolyte. We observed that the ws-SWCNT concentration at the air/water interface increases with time condensing into different patterns, among which are isolated soap-froths, rings, and the aggregation of cumuli-like 2D-structures. These patterns were recorded at different compression-expansion stages by Brewster angle microscopy (BAM). From the isotherm measurements, we are able to determine the diffusion process by which ws-SWCNT concentration builds up at the water surface. The corresponding LB films were very stable and could be transferred onto mica substrates easily. Atomic force microscopy (AFM) images revealed that the morphology of these films is surface-pressure dependent, and aligned structures with a nematic-like order formed closely packed mono- or multilayer films. The assembly of 2D-nanostructures by means of this approach offers a great potential for emergent technological applications using modified water-soluble SWCNTs.