Tailoring CuOx loading on CoFe2O4 nanocubes photocatalyst for superior photocatalytic degradation of triclosan pollutants under VL irradiation and toxicological evaluation.

In this study, we report the development of a novel CuOx(3 wt%)/CoFe2O4 nanocubes (NCs) photocatalyst through simple co-precipitation and wet impregnation methods for the efficient photocatalytic degradation of triclosan (TCS) pollutants. Initially, rod-shaped bare CoFe2O4 was synthesized using a simple co-precipitation technique. Subsequently, CuOx was loaded in various percentages (1, 2, and 3 wt%) onto the surface of bare CoFe2O4 nanorods (NRs) via the wet impregnation method. The synthesized materials were systematically characterized to evaluate their composition, structural and electrical characteristics. The CuOx(3 wt%)/CoFe2O4 NCs photocatalyst exhibited superior photocatalytic degradation efficiency of TCS (89.9%) compared to bare CoFe2O4 NRs (62.1 %), CuOx(1 wt%)/CoFe2O4 (80.1 %), CuOx(2 wt%)/CoFe2O4 (87.0 %) under visible light (VL) irradiation (λ ≥ 420 nm), respectively. This enhanced performance was attributed to the improved separation effectiveness of photogenerated electron (e-) and hole (h+) in CuOx(3 wt%)/CoFe2O4 NCs. Furthermore, the optimized CuOx(3 wt%)/CoFe2O4 NCs exhibited strong stability and reusability in TCS degradation, as demonstrated by three successive cycles. Genetic screening on Caenorhabditis elegans showed that CuOx(3 wt%)/CoFe2O4 NCs reduced ROS-induced oxidative stress during TCS photocatalytic degradation. ROS levels decreased at 30, 60, and 120-min intervals during TCS degradation, accompanied by improved egg hatching rates. Additionally, expression levels of stress-responsible antioxidant proteins like SOD-3GFP and HSP-16.2GFP were significantly normalized. This study demonstrates the efficiency of CuOx(3 wt%)/CoFe2O4 NCs in degrading TCS pollutants, offers insights into toxicity dynamics, and recommends its use for future environmental remediation.

Microalgae to bioenergy production: Recent advances, influencing parameters, utilization of wastewater - A critical review.

Fossil fuel limitations and their influence on climate change through atmospheric greenhouse gas emissions have made the excessive use of fossil fuels widely recognized as unsustainable. The high lipid content, carbon-neutral nature and potential as a biofuel source have made microalgae a subject of global study. Microalgae are a promising supply of biomass for third-generation biofuels production since they are renewable. They have the potential to produce significant amounts of biofuel and are considered a sustainable alternative to non-renewable energy sources. Microalgae are currently incapable to synthesize algal biofuel on an extensive basis in a sustainable manner, despite their significance in the global production of biofuels. Wastewater contains nutrients (both organic and inorganic) which is essential for the development of microalgae. Microalgae and wastewater can be combined to remediate waste effectively. Wastewater of various kinds such as industrial, agricultural, domestic, and municipal can be used as a substrate for microalgal growth. This process helps reduce carbon dioxide emissions and makes the production of biofuels more cost-effective. This critical review provides a detailed analysis of the utilization of wastewater as a growth medium for microalgal - biofuel production. The review also highlights potential future strategies to improve the commercial production of biofuels from microalgae.

Weathered polyethylene microplastics induced immunomodulation in zebrafish.

Microplastics are pollutants of emerging concern and the aquatic biota consumes microplastics (MPs), which has a range of toxicological and environmental effects on aquatic organisms that are not the intended targets. The current study looked into how weathered polyethylene (wPE) MPs affected Danio albolineatus immunological and haematological markers. In this experiment, fish of both sexes were placed in control and exposure groups, and they were exposed for 40 d at the sublethal level (1 µg L-1) of fragmented wPE, which contained 1074 ± 52 MPs per litre. Similarly, fish exposed to wPE MPs showed significant modifications in lysozyme, antimicrobial, and antiprotease activity, as well as differential counts. Results of the present study show that the male fish were more susceptible than female fish after 40 d of chronic exposure. Further studies are needed to ascertain how the innate and humoral immune systems of the fish respond to MPs exposure.

An Intensive Study on Algal Diversity in the Ancient Man-Made Aquatic Ecosystem of Tiruvallur, South India: Exploration for Sustainable Development.

Eco-friendly and beneficial nature algae make it prominent in our earth as well as for human life. In recent decades, microalgal applications is sought in varied fields from the remediation of wastes to the production of pharmaceutical products. Still, more extensive research on bioprospecting should to conducted to get the genus-specific or species-specific applications of microalgae with high efficiency. This inquiry was carried out (October 2021 to September 2022) for the effectual understanding of microalgal composition structure along with seasonal physicochemical variations in the age-old holy tank at Tiruvallur, southeast India. This inquiry also acts as the source data and makes the bioprospecting process easier. It also ignites the researchers to address the microalgae seasonal composition structure of peculiar wet environments. A total of 41 microalgae species were recorded, in which six major algal groups were in order of, Chlorophyceae > Bacillariophyceae > Cyanophyceae > Euglenophyceae > Zygnematophyceae > Trebouxiophyceae. Mean seasonal abundance was highest in the summer season (351 cells/L) and lowest in the monsoon (113 cells/L). One-way ANOVA showed seasonal variations of physicochemical parameters, in which the majority of them attained their peak during summer. Mean values of water temperature, pH, salinity, total dissolved solids, total solids, electrical conductivity, chemical oxygen demand, total hardness, total alkalinity, ammonia, nitrite-nitrogen, and nitrate-nitrogen for the summer were 31.43 °C, 8.53, 0.56 ppt, 383 mg/L, 525 mg/L, 0.85 mS/cm, 46.27 mg/L, 300 ppm, 251.67 ppm, 1.51 mg/L, 0.62 mg/L, and 0.70 mg/L, respectively. Karl Pearson's correlation revealed a most significant relationship between water quality factors and algal density. The Shannon's diversity index (2.78-3.39) indicated moderately rich microalgal diversity in the study area. Palmer's pollution index stated that the temple tank was organically polluted all over the study period except November.

Deciphering Microalgal Diversity of Peculiar Lentic Ecosystem in Chennai, South India: A Way Towards Sustainability.

Microalgae are quickly gaining attention among the researchers in various aspects such as biofuel applications, biogas, biomass production, waste water treatment, carbon fixation, animal feed ingredients, pigment production, and pharmaceutical products. One of the approaches to choose microalgae for biotechnological applications is to investigate their diversity and abundance in all possible wet environments. Samples were collected from three sampling sites for the period of 1 year (October 2021-September 2022) in Vadapalani temple tank at Chennai. Physicochemical parameters in current investigation were estimated according to APHA, 2017. Qualitative and quantitative analyses of phytoplankton were done throughout the study period. One-way ANOVA (Analyses of Variance) and Karl Pearson's correlation coefficient were estimated using SPSS (V.26.0). A total of 11 diversity indices were estimated using PAST (V 4.0). A total of 52 algal species were identified, prevailed over by Chlorophyceae (15 species), followed by Zygnematophyceae, Bacillariophyceae, Cyanophyceae, and Trebouxiophyceae. Chlorophyceae quantitatively structured the major category. The maximum and minimum values of density were observed during the season of summer (287 Cells/L) and monsoon (80 Cells/L), respectively. Chlorophyceae showed dominance with a density of 168 cells/L. The maximum and minimum densities of Chlorophyceae were recorded in the summer season (55 cells/L) and monsoon season (24 cells/L), respectively. Shannon's index (H') attained its zenith in February and April month of 2022 (3.60). This study further ignites the researchers to phycoprospect various temple water to address the nature of microalgae occurrence and for biotechnological purposes.

Evaluating Biofilm Inhibitory Potential in Fish Pathogen, Aeromonas hydrophila by Agricultural Waste Extracts and Assessment of Aerolysin Inhibitors Using In Silico Approach.

Aeromonas hydrophila, an opportunistic bacteria, causes several devastating diseases in humans and animals, particularly aquatic species. Antibiotics have been constrained by the rise of antibiotic resistance caused by drug overuse. Therefore, new strategies are required to prevent appropriate antibiotic inability from antibiotic-resistant strains. Aerolysin is essential for A. hydrophila pathogenesis and has been proposed as a potential target for inventing drugs with anti-virulence properties. It is a unique method of disease prevention in fish to block the quorum-sensing mechanism of A. hydrophila. In SEM analysis, the crude solvent extracts of both groundnut shells and black gram pods exhibited a reduction of aerolysin formation and biofilm matrix formation by blocking the QS in A. hydrophila. Morphological changes were identified in the extracts treated bacterial cells. Furthermore, in previous studies, 34 ligands were identified with potential antibacterial metabolites from agricultural wastes, groundnut shells, and black gram pods using a literature survey. Twelve potent metabolites showed interactions between aerolysin and metabolites during molecular docking analysis, in that H-Pyran-4-one-2,3 dihydro-3,5 dihydroxy-6-methyl (-5.3 kcal/mol) and 2-Hexyldecanoic acid (-5.2 kcal/mol) showed promising results with potential hydrogen bond interactions with aerolysin. These metabolites showed a better binding affinity with aerolysin for 100 ns in molecular simulation dynamics. These findings point to a novel strategy for developing drugs using metabolites from agricultural wastes that may be feasible pharmacological solutions for treating A. hydrophila infections for the betterment of aquaculture.

A novel encapsulation of 16 polycyclic aromatic hydrocarbons in petroleum sludge with palm oil fuel ash binder; an optimization study and sensitivity analysis using machine learning application.

Palm oil fuel ash (POFA) has limited use as a fertilizer, while contribute effectively to the environmental contamination and health risks. Petroleum sludge poses a serious effect on the ecological environment and human health. The present work aimed to present a novel encapsulation process with POFA binder for treating petroleum sludge. Among 16 polycyclic aromatic hydrocarbons, four compounds were selected for the optimization of encapsulation process due to their high risk as carcinogenic substrates. Percentage PS (10-50%) and curing days (7-28 days) factors were used in the optimization process. The leaching test of PAHs was assessed using a GC-MS. The best operating parameters to minimize PAHs leaching from solidified cubes with OPC and10% POFA were recorded with 10% PS and after 28 days, at which PAH leaching was 4.255 and 0.388 ppm with R2 is 0.90%. Sensitivity analysis of the actual and predicted results for both the control and the test (OPC and 10% POFA) revealed that the actual results of the 10% POFA experiments have a high consistency with the predicted data (R2 0.9881) while R2 in the cement experiments was 0.8009. These differences were explained based on the responses of PAH leaching toward percentage of PS and days of cure. In the OPC encapsulation process, the main role was belonged to PS% (94.22%), while with 10% POFA, PS% contributed by 32.36 and cure day contributed by 66.91%.

A comprehensive review on polylactic acid (PLA) - Synthesis, processing and application in food packaging.

Plastics play an essential role in food packaging; their primary function is to preserve the nature of the food, ensure adequate shelf life and ensure food safety. Plastics are being produced on a global scale in excess of 320 million tonnes annually, with demand rising to reflect the material in wide range of applications. Nowadays, the packaging industry is a significant consumer of synthetic plastic made from fossil fuels. Petrochemical-based plastics are regarded as the preferred material for packaging. Nonetheless, using these plastics in large quantities results in a long-standing environment. Environmental pollution and the depletion of fossil fuels have prompted researchers and manufacturers to develop eco-friendly biodegradable polymers to replace petrochemical-based polymers. As a result, the production of eco-friendly food packaging material has sparked increased interest as a viable alternative to petrochemical-based polymers. Polylactic acid (PLA) is one of the compostable thermoplastic biopolymers that is biodegradable and renewable in nature. High-molecular-weight PLA can be used to produce fibres, flexible, non-wovens, hard and durable materials (100,000 Da or even higher).The chapter focuses on food packaging techniques, food industry waste, biopolymers, their classification, PLA synthesis, the importance of PLA properties for food packaging, and technologies used to process PLA in food packaging.

A review on biodegradable polylactic acid (PLA) production from fermentative food waste - Its applications and degradation.

Due to its low carbon footprint and environmental friendliness, polylactic acid (PLA) is one of the most widely produced bioplastics in the world. Manufacturing attempts to partially replace petrochemical plastics with PLA are growing year over year. Although this polymer is typically used in high-end applications, its use will increase only if it can be produced at the lowest cost. As a result, food wastes rich in carbohydrates can be used as the primary raw material for the production of PLA. Lactic acid (LA) is typically produced through biological fermentation, but a suitable downstream separation process with low production costs and high product purity is also essential. The global PLA market has been steadily expanding with the increased demand, and PLA has now become the most widely used biopolymer across a range of industries, including packaging, agriculture, and transportation. Therefore, the necessity for an efficient manufacturing method with reduced production costs and a vital separation method is paramount. The primary goal of this study is to examine the various methods of lactic acid synthesis, together with their characteristics and the metabolic processes involved in producing lactic acid from food waste. In addition, the synthesis of PLA, possible difficulties in its biodegradation, and its application in diverse industries have also been discussed.

Microplastic contamination in commercial fish species in southern coastal region of India.

Due to its potential impact on food safety and human health, commercial species that have been contaminated with microplastics (MPs) are drawing more attention on a global scale. This study investigated the possibility of MPs contamination in different marine fish species with substantial commercial value that was captured off the south coast of India, from Adyar and Ennore regions. Over the course of six months, from October 2019 to March 2020, 220 fish were examined. It was discovered that the gills and guts had accumulated more numbers of MPs (1115 MPs) of which 68% were fibres and fragments. The commercial fish samples contained an average of 3.2-7.6 MPs per fish. Greater MPs pollution is seen in the Ennore regions. The prevalence of MPs was observed in carnivorous and planktivorous fish collected from both the sites. Fish guts contained the most MPs, according to the data. Pelagic fish accounted for the least amount of MPs, followed by mid- and demersal fish. Four different types of polymers were also identified in the present study: polyethylene, polypropylene, polystyrene, and polyamide. These results clearly showed the degree of microplastic contamination in fish tissues from the south Indian coastal regions of Adyar and Ennore. These results we hope will create a baseline data for MPs contamination in commercial fish species. The presence of MPs in the fish could have detrimental effects both on the environment and human health and thus comprehensive steps are required to prevent plastic pollution of the environment in south India's coastal region.

Assessment of nitrogen interaction with temperature on the growth and toxin production of mat-forming toxin-producing Anagnostidinema carotinosum.

AIMS: Global warming and eutrophication contribute to the severity of cyanobacteria blooms. However, it is unclear how these factors influence the growth and toxin production of Anagnostidinema carotinosum. METHODS AND RESULTS: Based on morphological and molecular analysis, this is the first time A. carotinosum was identified in South Korea. The interactive effect of temperature (25, 30 or 34°C) and nitrogen (2.5, 3.5 or 4.5 mg NO3 -N l-1 ) on A. carotinosum growth and toxin production was studied. Increasing nitrogen limitation reflects reduced growth and chlorophyll-a content at all temperatures. However, the growth was effective under nitrogen limitation when temperatures exceeded 25°C. The maximum growth was found at 30°C, followed by 34°C under higher nitrate levels (3.5 and 4.5 mg l-1 ). In addition, the cell microcystin and anatoxin-a quota increased significantly at 25°C with increasing nitrate limitation, decreasing considerably at 30°C in the same nitrate gradient. CONCLUSION: These results suggested temperatures stimulate A. carotinosum growth at 30 and 34°C and cellular toxin quota at 25 and 34°C with increasing NO3 -N levels. SIGNIFICANCE AND IMPACT OF THE STUDY: These findings imply that limiting nitrogen input alone can effectively reduce biomass; however, controlling A. carotinosum and its toxins at higher temperatures under nitrate limitation is necessary for water quality.

The role of plant-associated rhizobacteria in plant growth, biocontrol and abiotic stress management.

The rhizosphere is the region around the plant roots where maximum microbial activities occur. In the rhizosphere, microorganisms' beneficial and harmful activities affect plant growth and development. The mutualistic rhizospheric bacteria which improve plant growth and health are known as plant growth-promoting rhizobacteria (PGPR). They are very important due to their ability to help the plant in diverse ways. PGPR such as Pseudomonas, Bacillus, Azospirillum, Azotobacter, Arthrobacter, Achromobacter, Micrococcus, Enterobacter, Rhizobium, Agrobacterium, Pantoea and Serratia are now very well known. Rhizomicrobiome plays critical roles in nutrient acquisition and assimilation, improved soil texture, secreting and modulating extracellular molecules such as hormones, secondary metabolites, antibiotics and various signal compounds, all leading to the enhancement of plant growth and development. The microbes and compounds they secrete constitute valuable biostimulants and play pivotal roles in modulating plant stress responses. In this review, we highlight the rhizobacteria diversity and cutting-edge findings focusing on the role of a PGPR in plant growth and development. We also discussed the role of PGPR in resisting the adverse effects arising from various abiotic (drought, salinity, heat, heavy metals) stresses.

Photosynthetic microbial fuel cells for methanol treatment using graphene electrodes.

Photosynthetic microbial fuel cells (pMFC) represent a promising approach for treating methanol (CH3OH) wastewater. However, their use is constrained by a lack of knowledge on the extracellular electron transfer capabilities of photosynthetic methylotrophs, especially when coupled with metal electrodes. This study assessed the CH3OH oxidation capabilities of Rhodobacter sphaeroides 2.4.1 in two-compartment pMFCs. A 3D nickel (Ni) foam modified with plasma-grown graphene (Gr) was used as an anode, nitrate mineral salts media (NMS) supplemented with 0.1% CH3OH as anolyte, carbon brush as cathode, and 50 mM ferricyanide as catholyte. Two simultaneous pMFCs that used bare Ni foam and carbon felt served as controls. The Ni/Gr electrode registered a two-fold lower charge transfer resistance (0.005 kΩ cm2) and correspondingly 16-fold higher power density (141 mW/m2) compared to controls. The underlying reasons for the enhanced performance of R. sphaeroides at the graphene interface were discerned. The real-time polymerase chain reaction (PCR) analysis revealed the upregulation of cytochrome c oxidase, aa3 type, subunit I gene, and Flp pilus assembly protein genes in the sessile cells compared to their planktonic counterparts. The key EET pathways used for sustaining CH3OH oxidation were discussed.

Remediation techniques for uranium removal from polluted environment - Review on methods, mechanism and toxicology.

Uranium, a radionuclide, is a predominant element utilized for speciality requirements in industrial applications, as fuels and catalyst. The radioactive properties and chemical toxicity of uranium causes a major threat to the ecosystem. The hazards associated with Uranium pollution includes the cancer in bones, liver, and lungs. The toxicological properties of Uranium are discussed in detail. Although there are many methods to eliminate those hazards, this research work is aimed to describe the application of bioremediation methods. Bioremediation methods involve elimination of the hazards of uranium, by transforming into low oxidation form using natural microbes and plants. This study deeply elucidates the methods as bioleaching, biosorption, bioreduction and phytoremediation. Bioleaching process involves bio-oxidation of tetravalent uranium when it gets in contact with acidophilic metal bacterial complex to obtain leach liquor. In biosorption, chitin/chitosan derived sorbents act as chelators and binds with uranium by electrostatic attraction. Bio reduction employs a bacterial transformation into enzymes which immobilize and reduce uranium. Phytoremediation includes phytoextraction and phytotranslocation of uranium through xylems from soil to roots and shoots of plants. The highest uranium removal and uptake reported using the different methods are listed as follows: bioleaching (100% uranium recovery), biosorption (167 g kg-1 uranium uptake), bioreduction (98.9% uranium recovery), and phytoremediation (49,639 mg kg-1 uranium uptake). Among all the techniques mentioned above, bioleaching has been proved to be the most efficient for uranium remediation.

Detoxification of coir pith through refined vermicomposting engaging Eudrilus eugeniae.

Hazardous coir industrial waste, coir pith has been subjected to 50 days vermicomposting with Eudrilus eugeniae by amending nitrogenous legume plant, Gliricidia sepium together with cattle dung in different combinations, after 21 days precomposting using Pleurotus sajor-caju spawn. An increase in electrical conductivity, total NPK and calcium, and a decrease in organic matter, total organic carbon, C/N ratio, C/P ratio and total phenolic content in the final vermicompost were observed. Dehydrogenase, urease and cellulase activity peaked up to 30 days of vermicomposting and then declined. The phytotoxicity studies with Brassica juncea, C/N ratio and enzyme activities confirmed the stability and maturity of vermicompost. The results also demonstrated that the 2:3:1 ratio (coir pith + Gliricidia sepium + cow dung) is a suitable effective combination for nutrient-rich (N: 2.43%; P: 0.92%; K: 2.09%) vermicompost production. The total phenolic contents declined during the vermicomposting with a lower final content of 21.26 mg/g GAE in 2:3:1 combination of substrates from the initial level (105.56 mg/g GAE). Besides, the concentration of total phenol contents inversely related to the germination index of Brassica juncea (r = -0.761), indicating that the phenolic content could also play an important role in phytotoxicity. Growth and fecundity of Eudrilus eugeniae in 2:3:1 combination revealed the acceptability and rapid decomposition of coir pith substrate into vermifertilizer.

Artificial intelligence (AI) applications in adsorption of heavy metals using modified biochar.

The process of removal of heavy metals is important due to their toxic effects on living organisms and undesirable anthropogenic effects. Conventional methods possess many irreconcilable disadvantages pertaining to cost and efficiency. As a result, the usage of biochar, which is produced as a by-product of biomass pyrolysis, has gained sizable traction in recent times for the removal of heavy metals. This review elucidates some widely recognized harmful heavy metals and their removal using biochar. It also highlights and compares the variety of feedstock available for preparation of biochar, pyrolysis variables involved and efficiency of biochar. Various adsorption kinetics and isotherms are also discussed along with the process of desorption to recycle biochar for reuse as adsorbent. Furthermore, this review elucidates the advancements in remediation of heavy metals using biochar by emphasizing the importance and advantages in the usage of machine learning (ML) and artificial intelligence (AI) for the optimization of adsorption variables and biochar feedstock properties. The usage of AI and ML is cost and time-effective and allows an interdisciplinary approach to remove heavy metals by biochar.

A crucial review on polycyclic aromatic Hydrocarbons - Environmental occurrence and strategies for microbial degradation.

Over the last century, contamination of polycyclic aromatic hydrocarbons (PAHs) has risen tremendously due to the intensified industrial activities like petrochemical, pharmaceutical, insecticides and fertilizers applications. PAHs are a group of organic pollutants with adverse effects on both humans and the environment. These PAHs are widely distributed in various ecosystems including air, soil, marine water and sediments. Degradation of PAHs generally occurs through processes like photolysis, adsorption, volatilization, chemical degradation and microbial degradation. Microbial degradation of PAHs is done by the utilization of diverse microorganisms like algae, bacteria, fungi which are readily compatible with biodegrading/bio transforming PAHs into H2O, CO2 under aerobic, or CH4 under anaerobic environment. The rate of PAHs degradation using microbes is mainly governed by various cultivation conditions like temperature, pH, nutrients availability, microbial population, chemical nature of PAHs, oxygen and degree of acclimation. Several microbial species including Selenastrum capricornutum, Ralstonia basilensis, Acinetobacter haemolyticus, Pseudomonas migulae, Sphingomonas yanoikuyae and Chlorella sorokiniana are known to degrade PAHs via biosorption and enzyme-mediated degradation. Numerous bacterial mediated PAHs degradation methods are studied globally. Among them, PAHs degradation by bacterial species like Pseudomonas fluorescence, Pseudomonas aeruginosa, Rhodococcus spp., Paenibacillus spp., Mycobacterium spp., and Haemophilus spp., by various degradation modes like biosurfactant, bioaugmentation, biostimulation and biofilms mediated are also investigated. In contrarily, PAHs degradation by fungal species such as Pleurotus ostreatus, Polyporus sulphureus, Fusarium oxysporum occurs using the activity of its ligninolytic enzymes such as lignin peroxidase, laccase, and manganese peroxidase. The present review highlighted on the PAHs degradation activity by the algal, fungal, bacterial species and also focused on their mode of degradation.

Revisiting the plant growth-promoting rhizobacteria: lessons from the past and objectives for the future.

Plant beneficial rhizobacteria (PBR) is a group of naturally occurring rhizospheric microbes that enhance nutrient availability and induce biotic and abiotic stress tolerance through a wide array of mechanisms to enhance agricultural sustainability. Application of PBR has the potential to reduce worldwide requirement of agricultural chemicals and improve agro-ecological sustainability. The PBR exert their beneficial effects in three major ways; (1) fix atmospheric nitrogen and synthesize specific compounds to promote plant growth, (2) solubilize essential mineral nutrients in soils for plant uptake, and (3) produce antimicrobial substances and induce systemic resistance in host plants to protect them from biotic and abiotic stresses. Application of PBR as suitable inoculants appears to be a viable alternative technology to synthetic fertilizers and pesticides. Furthermore, PBR enhance nutrient and water use efficiency, influence dynamics of mineral recycling, and tolerance of plants to other environmental stresses by improving health of soils. This report provides comprehensive reviews and discusses beneficial effects of PBR on plant and soil health. Considering their multitude of functions to improve plant and soil health, we propose to call the plant growth-promoting bacteria (PGPR) as PBR.

Biomimetic synthesis of silver nanoparticles using flower extract of Bauhinia purpurea and its antibacterial activity against clinical pathogens.

In the present study, we have reported an eco-friendly, rapid, and simple method for the synthesis of silver nanoparticles (AgNPs) using Bauhinia purpurea flower extract as non-toxic bioreducing agent. The formation of AgNPs was confirmed by UV-visible spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy and energy-dispersive spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The synthesized AgNPs were spherical in shape with an average size of 20 nm. Furthermore, the antibacterial activities of the synthesized AgNPs (2-10 mM) against clinical pathogens, Klebsiella sp. and Staphylococcus sp., were evaluated under in vitro conditions.

Screening of anti-inflammatory phytocompounds from Crateva adansonii leaf extracts and its validation by in silico modeling.

Anti-inflammatory phytocompounds from Crateva adansonii DC leaf extracts were identified by GCMS analysis and its anti-inflammatory potential was evaluated by in silico molecular docking study against inflammatory molecular targets. Three different (Aqueous, Methanol and Petroleum ether) dried leaf extracts of Crateva adansonii were obtained from soxhlet extraction method. Preliminary phytoconstituents analysis of three different leaf extracts of C. adansonii confirmed the presence of various major classes of bioactive phytoconstituents such as polyphenols (tannins and flavonoids), steroids, alkaloid, coumarin, carbohydrate and terpenoids. Among three leaf extracts, methanolic leaf extract possess highest total phenolic content of 77 ±â€¯1.65 µg gallic acid equivalent (GAE)/g of dry weight of leaf extract, subsequently methanolic leaf extract also shows maximal in vitro antioxidant activity (DPPH scavenging activity) of 71.22 ±â€¯1.32% among three different leaf extracts. GC-MS analysis of petroleum ether leaf extract revealed the presence of nine phytocompounds representing 95.43% peak area percentage, among nine identified phytocompounds three phytocompounds of C. adansonii possess anti-inflammatory property namely phytol, 1-Hexyl-2-Nitrohexane and 2-Isopropyl-5-Methylcyclohexyl 3-(1-(4-Chlorophenyl)-3-Oxobutyl)-Coumarin-4-Yl Carbonate were chosen for in silico molecular docking study against four inflammatory receptor targets (COX-2, TNFα, IL-1ß and IL-6) and they shows less binding energy with highest docking score ranging from -15.9500 to 5.0869. The present study substantially indicated and proven that anti-inflammatory potential of phytocompounds from C. adansonii leaf extracts which can be exploited for commercial designing of novel anti-inflammatory drug to treat various inflammatory disorders.