RESUMEN
Polycrystalline Pt electrode was employed to selectively convert nitrite ions ([[EQUATION]]) into useful nitrogenous compound through electrochemical reduction reaction in neutral medium. According to adsorptive stripping analysis, the reduction process produced nitric oxide (NO) on the surface of Pt electrode. The spectroscopic test and gas chromatographic studies discovered the presence of ammonia (NH3) in the electrolyzed solution, suggesting the transformation of adsorbed NO into NH3 during the reverse scan. Scan rate dependent investigation was performed to elucidate kinetic information relating to this reaction on Pt surface. From Ep vs scan rate (υ) and jp vs υ (logarithmic plot), it was found that the conversion of [[EQUATION]] ion into NO is an irreversible reaction which relies on the diffusion of [[EQUATION]] ions to electrode surface. The Tafel analysis unveiled that the first electron transfer sets the overall reaction rate, having formal reduction potential, E0' = -0.46 V and standard heterogeneous rate constant, k0 = [[EQUATION]] cm s-1. Reductive transfer coefficient (α) is another kinetics parameter, which was found to be approximate 0.77 from the difference between Ep and Ep/2 of the voltammograms obtained over scan rate range 0.005 V s-1 to 0.250 V s-1, indicating a stepwise process.
RESUMEN
Metal-organic frameworks (MOFs) are promising materials because of their high designability of pores and functionalities. Especially, MOF thin films and their properties have been investigated toward applications in nanodevices. Typically, MOF thin films are fabricated by using a bottom-up method such as layer-by-layer (LbL) growth in air. Because the water molecules can coordinate and be replaced with organic linkers during synthesis, humidity conditions will be expected to influence the LbL growth processes. In this study, we fabricated MOF thin films composed of Zn2+, tetrakis-(4-carboxyphenyl)-porphyrin (TCPP), and 4,4'-bipyridyl (bpy) at 10 and 40% relative humidity (RH) conditions. Then, we investigated the humidity effects on chemical compositions of TCPP and bpy, periodic structure, orientation, and surface morphology. At high RH, coordination replacement of water with the organic linkers becomes more competitive than that at low RH, resulting in a different TCPP/bpy composition ratio between the two RH conditions. Also, more frequent coordination replacements of water with the organic linkers at high RH led to the formation of phases other than that observed at low RH, loss of growth orientation, and rough surface. The findings clarified the importance of controlling the RH condition during LbL growth to obtain the desired coordination networks.
RESUMEN
Escherichia coli is a useful platform for producing valuable materials through the implementation of synthetic gene(s) derived from other organisms. The production of lactate (LA)-based polyester poly[LA-co-3-hydroxybutyrate (3HB)] was carried out in E. coli using a set of five other species-derived genes: Pseudomonas sp. 61-3-derived phaC1STQK (for polymerization), Cupriavidus necator-derived phaAB (for 3HB-CoA generation), and Megasphaera elsdenii-derived pct (for LA-CoA generation) cloned into pTV118NpctphaC1ps(ST/QK)AB. Here, we aimed to optimize the expression level and timing of these genes to improve the production of P(LA-co-3HB) and to manipulate the LA fraction by replacing the promoters with various promoters in E. coli. Evaluation of the effects of 21 promoter replacement plasmids revealed that the phaC1STQK-AB operon is critical for the stationary phase for P(LA-co-3HB) production. Interestingly, the effects of the promoters depended on the composition of the medium. In glucose-supplemented LB medium, the dps promoter replacement plasmid resulted in the greatest effect, increasing the accumulation to 8.8 g/L and an LA fraction of 14.1 mol% of P(LA-co-3HB), compared to 2.7 g/L and 8.1 mol% with the original plasmid. In xylose-supplemented LB medium, the yliH promoter replacement plasmid resulted in the greatest effect, with production of 5.6 g/L and an LA fraction of 40.2 mol% compared to 3.6 g/L and 22.6 mol% with the original plasmid. These results suggest that the selection of an appropriate promoter for expression of the phaC1STQK-AB operon could improve the production and LA fraction of P(LA-co-3HB). Here, we propose that the selection of cell-growth phase-dependent promoters is a versatile biotechnological strategy for effective intracellular production of polymeric materials such as P(LA-co-3HB), in combination with the selection of sugar-based carbon sources.
Asunto(s)
Escherichia coli , Ácido Láctico , Escherichia coli/genética , Escherichia coli/metabolismo , Poliésteres/metabolismo , Hidroxibutiratos/metabolismoRESUMEN
Urinary tract infection (UTI) and bloodstream infection (BSI) caused by extended-spectrum ß-lactamase (ESBL)-producing bacteria are important healthcare problems. Appropriate infection management requires the direct detection of organisms in clinical specimens. We assessed the capability of the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry-based MBT STAR-Cepha kit to detect ESBL producers in clinical urine and blood samples. Over a 1-year period, 90 urine samples and 55 positive monomicrobial (Escherichia coli, Klebsiella pneumoniae, Klebsiella oxytoca, or Proteus mirabilis) blood cultures were collected from patients with UTI or BSI at Hamamatsu University Hospital. ß-lactamase activity in these samples was directly detected using the MBT STAR-Cepha kit, and the results were compared with those of antimicrobial susceptibility testing and polymerase chain reaction detection assay for the isolates. In receiver operating characteristic curve analysis, the kit assay showed low accuracy in detecting ESBL producers in urine samples (area under the curve [AUC], 0.69). Meanwhile, the AUC for detecting all ESBL-producing bacteria in positive blood cultures was 0.81. The kit assay detected cefotaxime (CTX) resistance (mainly in CTX-M-type ESBL producers) with high accuracy in positive blood cultures; however, it did not accurately detect ESBL producers in urine samples and CTX-susceptible isolates with other ESBL-associated genes (e.g., TEM and SHV types) in positive blood cultures. MBT STAR-Cepha testing can accurately discriminate CTX-resistant ESBL producers in BSI cases and thus can contribute to effective infection management. The results suggest that different sample types, antibiotic resistance profiles, and resistance genes can affect the kit performance.
Asunto(s)
Infecciones Urinarias , beta-Lactamasas , Humanos , beta-Lactamasas/genética , beta-Lactamasas/análisis , Cultivo de Sangre , Cefotaxima , Escherichia coli , Klebsiella pneumoniae , Espectrometría de Masas , Infecciones Urinarias/diagnóstico , Infecciones Urinarias/microbiología , Rayos Láser , Pruebas de Sensibilidad Microbiana , Antibacterianos/farmacologíaRESUMEN
Thermal transformation is an effective remediation measure to stabilize soil Pb and other heavy metals via transformation into less soluble compounds. This study aimed to determine the solubility of Pb in soils subjected to heating at a range of temperatures (100-900 °C) in relation to the changes in Pb speciation using XAFS spectroscopy. Lead solubility in the contaminated soils after thermal treatment corresponded well to the chemical species of Pb present. As the temperature was increased to 300 °C, cerussite and Pb associated with humus started to decompose in the soils. As the temperature was further increased to 900 °C, the amount of water and HCl extractable Pb decreased significantly from the soils, whereas Pb-bearing feldspar started to occur, accounting for nearly 70% of the soil Pb. During thermal treatment, Pb species in the soils were little affected by Fe oxides that showed a significant phase transformation into hematite. Our study proposes the following underlying mechanisms for Pb immobilization in thermally treated soils: i) thermally labile Pb species such as PbCO3 and Pb associated with humus start to decompose at temperatures around 300 °C, ii) aluminosilicates with crystalline and poorly ordered structures undergo thermal decomposition at temperatures around 400 °C, iii) liberating Pb in the soil is then associated with a Si and Al rich liquid derived from thermally decomposed aluminosilicates at higher temperatures, and iv) the formation of Pb-feldspar like minerals is enhanced at 900 °C.
RESUMEN
SARS-CoV-2 nucleic acid detection tests enable rapid virus detection; however, it is challenging to identify genotypes to comprehend the local epidemiology and infection routes in real-time qRT-PCR. At the end of June 2022, our hospital experienced an in-hospital cluster of COVID-19. When examined using the GeneXpert® System, the cycle threshold (Ct) value of the N2 region of the nucleocapsid gene of SARS-CoV-2 was approximately 10 cycles higher than that of the envelope gene. Sanger sequencing revealed a G29179T mutation in the primer and probe binding sites. A review of past test results revealed differences in Ct values in 21 of 345 SARS-CoV-2-positive patients, of which 17 cases were cluster-related and 4 were not. Including these 21 cases, 36 cases in total were selected for whole-genome sequencing (WGS). The viral genomes in the cluster-related cases were identified as BA.2.10, and those in the non-cluster cases were closely related and classified as being downstream of BA.2.10 and other lineages. Although WGS can provide comprehensive information, its use is limited in various laboratory settings. A measurement platform reporting and comparing Ct values of different target genes can improve test accuracy, enhance our understanding of infection spread, and be applied to the quality control of reagents.
RESUMEN
Fully aromatic sulfonated polyimides with a rigid backbone can form lamellar structures under humidified conditions, thereby facilitating the transmission of protons in ionomers. Herein, we synthesized a new sulfonated semialicyclic oligoimide composed of 1,2,3,4-cyclopentanetetracarboxylic dianhydride (CPDA) and 3,3'-bis-(sulfopropoxy)-4,4'-diaminobiphenyl to investigate the influence of molecular organized structure and proton conductivity with lower molecular weight. The weight-average molecular weight (M w) determined by gel permeation chromatography was 9300. Humidity-controlled grazing incidence X-ray scattering revealed that one scattering was observed in the out-of-plane direction and showed that the scattering position shifted to a lower angle as the humidity increased. A loosely packed lamellar structure was formed by lyotropic liquid crystalline properties. Although the ch-pack aggregation of the present oligomer was reduced by substitution to the semialicyclic CPDA from the aromatic backbone, the formation of a distinct organized structure in the oligomeric form was observed because of the linear conformational backbone. This report is the first-time observation of the lamellar structure in such a low-molecular-weight oligoimide thin film. The thin film exhibited a high conductivity of 0.2 (±0.01) S cm-1 under 298 K and 95% relative humidity, which is the highest value compared to the other reported sulfonated polyimide thin films with comparable molecular weight.
RESUMEN
Chlorazol yellow (CY) is a commonly used anionic, toxic, mutagenic, and potentially carcinogenic azo dye, which is menacing to the environment, aquatic system, food chain, and human health as well. To remove CY dye molecules from an aqueous medium, a series of Ce, Bi, and N co-doped TiO2 photocatalysts were prepared by varying the composition of the dopants. Under sunlight irradiation, the resultant 5 wt% (Ce-Bi-N) co-doped TiO2 composite catalyst was found to show the best catalytic activity. Hence, the required characterization of this catalyst was performed systematically using energy-dispersive X-ray spectroscopy (EDX), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) techniques. From the thorough investigation, it is revealed that the CY molecules reached adsorption-desorption equilibrium onto the surface of the catalyst within 30 min following second-order kinetics. Herein, the catalyst attained 97% degradation when exposed to sunlight at neutral (pH ~ 7, [CY] = 5 mg L-1) medium. The developed catalyst can destruct CY molecules with a maximum rate of 23.1 µg CY g-1 min-1 and the photodegradation kinetics follows first-order kinetics below 23.5 mg L-1, a fractional order between 23.5 and 35.0 mg L-1, and a zeroth order above 35.0 mg L-1 of CY concentration. Finding from scavenging effect implies that [Formula: see text] and [Formula: see text] radicals have significant influence on the degradation. A suitable mechanism has been proposed with excellent stability and verified reusability of the proposed photocatalyst.
Asunto(s)
Luz Solar , Titanio , Humanos , Titanio/química , Fotólisis , CatálisisRESUMEN
Coal fly ash (CFA) contains considerable amounts of potentially hazardous trace elements. Characterization of trace elements in CFA is essential for the safe disposal and recycle of CFA. The objectives of this study were i) to determine and predict the solubility of trace elements in CFA in relation to their chemical and mineralogical properties, and ii) to characterize trace elements using the surface chemical analysis including time-of-flight secondary ion mass spectrometry (TOF-SIMS) and accelerator-based micro particle induced X-ray emission (PIXE) analysis, in combination with X-ray absorption fine structure (XAFS) spectroscopy with a primary focus on As and Cr. The CFA samples from 12 thermal power plants contained B (ave. 203 mg kg-1), F (90 mg kg-1), Cr (63 mg kg-1), As (21 mg kg-1), and Se (3.2 mg kg-1), in which the water soluble fraction relative to the total concentration decreased in the order B (24 %) > Se (23 %) > F (20 %) > As (1.7 %) > Cr(IV) (0.71 %). A regression model indicated that water extractable As and Cr(VI) from CFA increased linearly with increasing SiO2 and CaO in CFA, respectively. The SIMS images showed that B was finely and heterogeneously distributed on CFA, whereas F was distributed homogeneously on CFA. The combined results from micro-PIXE and XAFS revealed that i) As was distributed on about 50-µm particles in the form of As(V) associated with Al and Ca, and ii) Cr was co-located with Fe and Ca on about 50-µm particles and was present as Cr(III). This study demonstrated that the combined results from TOF-SIMS, micro-PIXE, and XAFS techniques enable trace elements in CFA to be better characterized in terms of spatial distribution and chemical speciation.
Asunto(s)
Ceniza del Carbón , Oligoelementos , Ceniza del Carbón/química , Oligoelementos/análisis , Rayos X , Carbón Mineral/análisis , Espectrometría de Masa de Ion Secundario , Dióxido de Silicio , AguaRESUMEN
Colorectal cancer is one of the most killing cancers and this has become a global problem. Current treatment and anticancer drugs cannot specifically target the cancerous cells, thus causing toxicity towards surrounding non-cancer cells. Hence, there is an urgent need to discover a more target-specific therapeutic agent to overcome this problem. Core-shell nanoparticles have emerged as good candidate for anticancer treatment. This study aimed to synthesize core-shell nanoparticles via green method which utilised crude peels extract of Garcinia mangostana as reducing and stabilising agents for drug delivery. Gold-silver core-shell nanoparticles (Au-AgNPs) were synthesized through seed germination process in which gold nanoparticles acted as the seed. A complete coating was observed through transmission electron microscopy (TEM) when the ratio of AuNPs and AgNPs was 1:9. The size of Au-AgNPs was 38.22 ± 8.41 nm and was mostly spherical in shape. Plant-based drug, protocatechuic acid (PCA) was loaded on the Au-AgNPs to investigate their anticancer activity. In HCT116 colon cancer cells, PCA-loaded Au-AgNPs (IC50 = 10.78 µg/ml) showed higher inhibitory action than the free PCA (IC50= 148.09 µg/ml) and Au-AgNPs alone (IC50= 24.36 µg/ml). Up to 80% inhibition of HCT116 cells was observed after the treatment of PCA-loaded Au-AgNPs at 15.63 µg/ml. The PCA-loaded Au-AgNPs also showed a better selectivity towards HCT116 compared to CCD112 colon normal cells when tested at the same concentrations. These findings suggest that Au-AgNPs system can be used as a potent nanocarrier to combat cancerous cells by offering additional anticancer properties to the loaded drug.
RESUMEN
Nickel particles alone can oxidize hydrogen peroxide but confronts extreme stability problem which imparts a barrier to act as sensor. The porous Nafion bed on glassy carbon electrode (GCE) surface provides the sureness of incorporating of Ni particles which was further exploited as an electrochemical sensor for H2O2 detection through oxidative degradation process. The simple electrochemical incorporation of Ni particles along the pores of Nafion improves the stability of the sensor significantly. The oxidative pathway of hydrogen peroxide on GCE/Nafion/Ni was probed by analyzing mass transfer dependent linear sweep voltammograms both in static and rotating modes along with chronoamperometry. An electron transfer step determines the overall reaction rate with k°= 2.72 × 10-4 cm s-1, which is supported by the values of transfer coefficient (ß) in between (0.68-0.75). Sensing performance was evaluated by recording differential pulse voltammograms (DPVs) with the linear detection limit (LOD) of 1.8 µM and linear dynamic range (LDR) of 5-500 µM. Real samples from industrial sources were successfully quantified with excellent reproducibility mark GCE/Nafion/Ni electrode as an applicable sensor.
Asunto(s)
Carbono , Peróxido de Hidrógeno , Técnicas Electroquímicas , Electrodos , Polímeros de Fluorocarbono , Reproducibilidad de los ResultadosRESUMEN
Covalent organic frameworks (COFs) are a novel class of crystalline porous polymers, which possess high porosity, excellent stability, and regular nanochannels. 2D COFs provide a 1D nanochannel to form the proton transport channels. The abovementioned features afford a powerful potential platform for designing materials as proton transportation carriers. Herein, the authors incorporate sulfonic acid groups on the pore walls as proton sources for enhancing proton transport conductivity in the 1D channel. Interestingly, the sulfonic acid COFs (S-COFs) electrolytes being binder free exhibit excellent proton conductivity of ≈1.5 × 10-2 S cm-1 at 25 â and 95% relative humidity (RH), which rank the excellent performance in standard proton-conducting electrolytes. The S-COFs electrolytes keep the high proton conduction over the 24 h. The activation energy is estimated to be as low as 0.17 eV, which is much lower than most reported COFs. This research opens a new window to evolve great potential of structural design for COFs as the high proton-conducting electrolytes.
Asunto(s)
Estructuras Metalorgánicas , Electrólitos , Polímeros , Protones , Ácidos SulfónicosRESUMEN
The ordered π skeletons of covalent organic frameworks make them viable light-emitting materials but their limited tunability has precluded further implementation. Here we report the synthesis of hydrazone-linked frameworks which are stable in water, acid, and base, and demonstrate their utility as a platform for light emission. The polygonal backbone is designed to be luminescent and partially π conjugated while the pore wall is docked with single atom or unit to induce resonance, hyperconjugation, and tautomerization effects. These effects can be transmitted to the backbone, so that the framework can emit three primary colors of light. The wall can be perturbated with multiple surface sites, rendering the material able to edit diverse emission colors in a predesignable and digital way. The systems show high activity, stability, tunability, and sensibility: a set of features attractive for light-emitting and sensing applications.
RESUMEN
Several investigations have indicated that proton conduction and hydration properties of acidic ionomers differ from those of membranes. However, relations between the OH- conductivity and water uptake in thin film forms of anion exchange membranes have not been reported yet. For this study, new inâ situ measurements were established to elucidate the OH- conductivity and water uptake without allowing any influence of CO2 from the air. Poly[(9,9-bis(6'-(N,N,N-trimethylammonium)-hexyl)-9H-fluorene)-alt-(1,4-benzene)], denoted as PFB+ , was synthesized as a model ionomer. The highest OH- conductivity of 273â nm-thick PFB+ film was 5.3×10-2 â S cm-1 at 25 °C under 95 % relative humidity (RH), which is comparable to the reported OH- conductivity of PFB+ membrane. Reduced OH- conductivity was found in the thinner film at 95 % RH. The decreased OH- conductivity is explainable by the reduced number of water molecules contained in the thinner film. The OH- conductivity was reduced only slightly under the same water uptake.
RESUMEN
The luminescent and proton conductive Pt(ii) complex [PtCl(tpy-o-py)]Cl and its HCl adduct [PtCl(tpy-o-pyH)]Cl2 (o-Pt and o-Pt·HCl, respectively; tpy-o-py = 2,2':6',2''-terpyridine-6',2'''-pyridine) were synthesised and their crystal structures, vapochromic behaviour, and proton conduction, were investigated and compared to those of the para isomers [PtCl(tpy-p-py)]Cl and [PtCl(tpy-p-pyH)]Cl2 (p-Pt and p-Pt·HCl, respectively; tpy-p-py = 2,2':6',2''-terpyridine-4',4'''-pyridine). X-ray structure analysis revealed that the intermolecular metallophilic (PtPt) interaction was negligible in o-Pt but effective in o-Pt·HCl. Reversible transformation between o-Pt and o-Pt·HCl coupled with significant colour and luminescence changes was achieved by four different external stimuli, namely: exposure of o-Pt to humid HCl gas to form o-Pt·HCl, heating, exposure to MeOH vapour, and finally drying in air to regenerate the original o-Pt. The intraligand π-π* orange emission observed for o-Pt exhibited negligible dependence on the relative humidity (RH). Conversely, o-Pt·HCl exhibited red metal-metal-to-ligand charge-transfer (MMLCT) phosphorescence at 725 nm, originating from effective intermolecular Pt-Pt interactions, and interesting vapochromic behaviour that was dependent on the RH. Notably, o-Pt·HCl presented higher conductivity than the p-Pt·HCl isomer at RH < 80%. This trend was reversed at RH values > 80%, probably owing to the second water-adsorption-induced transformation of p-Pt·HCl. The cooperative phenomenon between the proton conduction and vapochromic behaviour observed for both o-Pt·HCl and p-Pt·HCl should allow the visualisation of the proton-conducting pathway, without the need for a bulk electrode, via the absorption and emission colours at both macroscopic and microscopic levels.
RESUMEN
Several current topics are introduced in this review, with particular attention to highly proton-conductive polymer thin films with organized structure and molecularly oriented structure. Organized structure and molecularly oriented structure are anticipated as more promising approaches than conventional less-molecular-ordered structure to elucidate mechanisms of high proton conduction and control proton conduction. This review introduces related polymer materials and molecular design using lyotropic liquid crystals and hydrogen bond networks for high proton conduction. It also outlines the use of substrate surfaces and external fields, such as pressure and centrifugal force, for organizing structures and molecularly oriented structures.
RESUMEN
Nanometer thin films of Nafion ionomer interfaced with platinum form the functional electrodes in many electrochemical devices including fuel cells and electrolyzers. To impart facile proton conduction in a Nafion ionomer, sufficient hydration of the Nafion ionomer is necessary to create a percolating network of water-filled nanometer-sized hydrophilic domains that manifest as macroscopic swelling. This hydration behavior of the ionomer thin films is poorly understood especially for films confined on electrochemically relevant Pt substrates. In this work, we present the evolution of hydration-dependent microscopic hydrophilic domains and macroscopic expansion of a 55 nm thin Nafion film on a Pt substrate. The cross-correlation among the film macro-expansion from ellipsometry, the micro-expansion from GISAXS, and the water distribution from neutron reflectometry (NR) explains the observed non-affine behavior of the film which can be attributed to the randomly and spatially non-uniform distribution of water domains. A correlation between the macroscopic factor (ε/τ) for protonic conductivity, and the domain size and swelling is presented for the first time. In addition, interfacial water between Pt and the ionomer interface is estimated at 75% and 84% RH, and an increase in domain size with RH is discussed to explain the increased activity and oxygen diffusivity with RH.
RESUMEN
A new type of artificial giant liposome incorporating ion transport channels and using nanoparticles of metal organic frameworks was demonstrated. The micropores of Prussian blue nanoparticles served as ion transport channels between the outer and inner phases of liposomes.
Asunto(s)
Ferrocianuros/química , Nanopartículas/química , Liposomas Unilamelares/metabolismo , Concentración de Iones de Hidrógeno , Hidróxidos/metabolismo , Transporte Iónico , Estructuras Metalorgánicas/química , Liposomas Unilamelares/químicaRESUMEN
Rapid and sensitive detection of extended-spectrum ß-lactamases (ESBLs) is essential for infection control and antimicrobial treatment. Recently, a matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS)-based MBT STAR-BL software module has been used for detecting ß-lactamase activity; however, this system cannot differentiate ESBL producing bacteria from other third-generation cephalosporin-resistant strains. In this study, we utilized a MALDI-TOF MS-based MBT STAR-BL method to identify ESBL activity with ß-lactamase inhibitors. A cefotaxime (CTX) hydrolysis assay, ß-lactamase inhibition, clavulanic acid (CVA), and sulbactam (SBT) were used for detecting ESBL producers with the MBT STAR-BL software module. This software module automatically calculated the logRQ values in each assay. logRQ is the logarithm of the ratio of the summed hydrolyzed peak intensities to the summed non-hydrolyzed peak intensities and measured the efficiency of antibiotic hydrolysis. We divided the logRQ level of the ß-lactamase inhibition assay by the logRQ value in the CTX hydrolysis assay, and we used this logRQ ratio as a measure of ß-lactamase inhibition efficiency. We assessed the logRQ ratio calculated by this novel method for detecting ESBL producers in 132 Enterobacteriaceae. We performed the MALDI-TOF MS-based MBT STAR-BL approach with ß-lactamase inhibitors for detecting ESBL producers and showed that the results of the inhibition assay with ß-lactamase inhibitors depended on types of bacterial species. Furthermore, we improved elapsed times and accuracy in MBT STAR-BL methods by using proper ß-lactamase inhibitors against specific bacterial strains to compare with the conventional standard lab method. The results suggest that the target bacterial species and ß-lactamase inhibitors used were important for the utility of the MALDI-TOF MS-based MBT STAR-BL software module.
Asunto(s)
Enterobacteriaceae/efectos de los fármacos , Programas Informáticos , Inhibidores de beta-Lactamasas/farmacología , beta-Lactamasas/análisis , Antibacterianos/farmacología , Cefotaxima/farmacología , Ácido Clavulánico/farmacología , Enterobacteriaceae/enzimología , Enterobacteriaceae/genética , Humanos , Hidrólisis , Pruebas de Sensibilidad Microbiana , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Sulbactam/farmacologíaRESUMEN
Superparamagnetic magnetite nanocomposites (Fe3O4-NCs) were successfully synthesized, which comprised of montmorillonite (MMT) as matrix support, Kappaphycus alvarezii (SW) as bio-stabilizer and Fe3O4 as filler in the composites to form MMT/SW/Fe3O4-NCs. Nanocomposite with 0.5â¯g Fe3O4 (MMT/SW/0.5Fe3O4) was selected for anticancer activity study because it revealed high crystallinity, particle size of 7.2⯱â¯1.7â¯nm with majority of spherical shape, and Msâ¯=â¯5.85â¯emu/g with negligible coercivity. Drug loading and release studies were carried out using protocatechuic acid (PCA) as the model for anticancer drug, which showed 19% and 87% of PCA release in pH 7.4 and 4.8, respectively. Monolayer anticancer assay showed that PCA-loaded MMT/SW/Fe3O4 (MMT/SW/Fe3O4-PCA) had selectivity towards HCT116 (colorectal cancer cell line). Although MMT/SW/Fe3O4-PCA (0.64â¯mg/mL) showed higher IC50 than PCA (0.148â¯mg/mL) and MMT/SW/Fe3O4 (0.306â¯mg/mL, MMT/SW/Fe3O4-PCA showed more effective killing towards tumour spheroid model generated from HCT116. The IC50 for MMT/SW/Fe3O4-PCA, MMT/SW/Fe3O4 and PCA were 0.132, 0.23 and 0.55â¯mg/mL, respectively. This suggests the improved penetration efficiency and drug release of MMT/SW/Fe3O4-PCA towards HCT116 spheroids. Moreover, concentration that lower than 2â¯mg/mL MMT/SW/Fe3O4-PCA did not result any hemolysis in human blood, which suggests them to be ideal for intravenous injection. This study highlights the potential of MMT/SW/Fe3O4-NCs as drug delivery agent.