Redox Active Colloids as Discrete Energy Storage Carriers.

Versatile and readily available battery materials compatible with a range of electrode configurations and cell designs are desirable for renewable energy storage. Here we report a promising class of materials based on redox active colloids (RACs) that are inherently modular in their design and overcome challenges faced by small-molecule organic materials for battery applications, such as crossover and chemical/morphological stability. RACs are cross-linked polymer spheres, synthesized with uniform diameters between 80 and 800 nm, and exhibit reversible redox activity as single particles, as monolayer films, and in the form of flowable dispersions. Viologen-based RACs display reversible cycling, accessing up to 99% of their capacity and 99 ± 1% Coulombic efficiency over 50 cycles by bulk electrolysis owing to efficient, long-distance intraparticle charge transfer. Ferrocene-based RACs paired with viologen-based RACs cycled efficiently in a nonaqueous redox flow battery employing a simple size-selective separator, thus demonstrating a possible application that benefits from their colloidal dimensions. The unprecedented versatility in RAC synthetic and electrochemical design opens new avenues for energy storage.

Impact of redox-active polymer molecular weight on the electrochemical properties and transport across porous separators in nonaqueous solvents.

Enhancing the ionic conductivity across the electrolyte separator in nonaqueous redox flow batteries (NRFBs) is essential for improving their performance and enabling their widespread utilization. Separating redox-active species by size exclusion without greatly impeding the transport of supporting electrolyte is a potentially powerful alternative to the use of poorly performing ion-exchange membranes. However, this strategy has not been explored possibly due to the lack of suitable redox-active species that are easily varied in size, remain highly soluble, and exhibit good electrochemical properties. Here we report the synthesis, electrochemical characterization, and transport properties of redox-active poly(vinylbenzyl ethylviologen) (RAPs) with molecular weights between 21 and 318 kDa. The RAPs reported here show very good solubility (up to at least 2.0 M) in acetonitrile and propylene carbonate. Ultramicroelectrode voltammetry reveals facile electron transfer with E1/2 ∼ -0.7 V vs Ag/Ag(+)(0.1 M) for the viologen 2+/+ reduction at concentrations as high as 1.0 M in acetonitrile. Controlled potential bulk electrolysis indicates that 94-99% of the nominal charge on different RAPs is accessible and that the electrolysis products are stable upon cycling. The dependence of the diffusion coefficient on molecular weight suggests the adequacy of the Stokes-Einstein formalism to describe RAPs. The size-selective transport properties of LiBF4 and RAPs across commercial off-the-shelf (COTS) separators such as Celgard 2400 and Celgard 2325 were tested. COTS porous separators show ca. 70 times higher selectivity for charge balancing ions (Li(+)BF4(-)) compared to high molecular weight RAPs. RAPs rejection across these separators showed a strong dependence on polymer molecular weight as well as the pore size; the rejection increased with both increasing polymer molecular weight and reduction in pore size. Significant rejection was observed even for rpoly/rpore (polymer solvodynamic size relative to pore size) values as low as 0.3. The high concentration attainable (>2.0 M) for RAPs in common nonaqueous battery solvents, their electrochemical and chemical reversibility, and their hindered transport across porous separators make them attractive materials for nonaqueous redox flow batteries based on the enabling concept of size-selectivity.

Efficient charge transport in assemblies of surfactant-stabilized semiconducting nanoparticles.

Charge transport through a semiconducting nanoparticle assembly is demonstrated. The hole mobility of low and high molecular weight and regioreglular poly(3-hexylthiophene) (P3HT) nanoparticles is on the order of 2 × 10(-4) to 5 × 10(-4) cm(2) V(-1) s(-1) , which is comparable to drop-cast thin films of pristine P3HT. Various methods are employed to understand the nature and importance of the nanoparticle packing.

Tuning aggregation of poly(3-hexylthiophene) within nanoparticles.

Nanoparticles derived from π-conjugated polymers have gained widespread attention as active layer materials in various organic electronics applications. The optoelectronic, charge transfer, and charge transport properties of π-conjugated polymers are intimately connected to the polymer aggregate structure. Herein we show that the internal aggregate structure of regioregular poly(3-hexylthiophene) (P3HT) within polymer nanoparticles can be tuned by solvent composition during nanoparticle fabrication through the miniemulsion process. Using absorption spectra and single-NP photoluminescence decay properties, we show that a solvent mixture consisting of a low boiling good solvent and a high boiling marginal solvent results in polymer aggregate structure with a higher degree of uniformity and structural order. We find that the impact of solvent on the nature of P3HT aggregation within nanoparticles is different from what has been reported in thin films.