RESUMEN
Here we report stepwise methylation of end-on bridging dinitrogen to a hydrazido ligand to a pentamethylhydrazinium salt, which is mediated by a titanium system with a tripodal aryloxide supporting ligand. The results constitute a synthetic cycle for pentamethylhydrazinium formation from dinitrogen and methyl iodide. We also describe silylation of the dinitrogen complex and carboxylation of the hydrazido complex.
RESUMEN
The antiallergic effects of gut microbiota have been attracting attention in recent years, but the underlying cellular and molecular mechanisms have not yet been fully understood. In this study, we aimed to investigate these mechanisms specifically focusing on mast cells. Mast cells retain intracellular granules containing various inflammatory mediators such as histamine, which are released outside the cells upon IgE and allergen stimulation. We previously reported that increased expression of the transcription factor, CCAAT/enhancer-binding protein α (C/EBPα), suppresses granule formation in mast cells and that Lacticaseibacillus casei JCM1134T (LC) upregulates C/EBPα levels. Here, granule formation in mouse bone marrow-derived mast cells was suppressed in a MyD88-dependent manner after LC treatment due to C/EBPα-dependent downregulation of the genes encoding serglycin (SRGN) and mast cell protease 4 (Mcpt4). Furthermore, C/EBPα expression was regulated by DNA methylation in the 5' region far upstream of the transcription start site. LC suppressed DNA methylation of specific CpG motifs in the 5' region of the C/EBPα gene. These results conclude that specific gut microbial components, such as those from LC, suppress granule formation in mast cells by inhibiting SRGN and Mcpt4 expression via reduced C/EBPα gene methylation.
RESUMEN
Superatomic clusters - assemblies of atoms with various sizes, shapes, and compositions - can form hierarchical architectures that exhibit emergent electronic properties not found in their individual units. In particular, cubic M4X4 clusters of chalcogenides (M = transition metal; X = chalcogen) are recognized as versatile building blocks for 3D structures with tunable morphologies and electronic properties. However, tetrahedral M4X4 clusters rarely assemble into 2D architectures, which could offer a distinct class of functional materials from their 3D analogues. Here, this work reports the preparation of 2D Mo8S8Cl11, a superatomic layer with a sandwich structure consisting of Mo4S4 clusters interconnected through Cl cross-linking. The vapor-phase reaction inside nanotubes promotes the selective growth of Mo8S8Cl11 nanoribbons, allowing detailed characterization via transmission electron microscopy. This methodology can be applied to the growth of layered structures containing Mo8S8Cl11 at the micrometer scale. This work has demonstrated that mono- and few-layer Mo8S8Cl11 can be prepared by exfoliation of parent solids. Electronic structure calculations indicate that the 2D monolayer has quasi-flat bands, giving rise to an indirect-to-direct bandgap transition under mechanical strain. Furthermore, scanning electrochemical microscopy reveals the potential of the layered structures as highly efficient catalysts for the hydrogen-evolution reaction.
RESUMEN
Tubular structures of transition metal dichalcogenides (TMDCs) have attracted attention in recent years due to their emergent physical properties, such as the giant bulk photovoltaic effect and chirality-dependent superconductivity. To understand and control these properties, it is highly desirable to develop a sophisticated method to fabricate TMDC tubular structures with smaller diameters and a more uniform crystalline orientation. For this purpose, the rolling up of TMDC monolayers into nanoscrolls is an attractive approach to fabricating such a tubular structure. However, the symmetric atomic arrangement of a monolayer TMDC generally makes its tubular structure energetically unstable due to considerable lattice strain in curved monolayers. Here, we report the fabrication of narrow nanoscrolls by using Janus TMDC monolayers, which have an out-of-plane asymmetric structure. Janus WSSe and MoSSe monolayers were prepared by the plasma-assisted surface atom substitution of WSe2 and MoSe2 monolayers, respectively, and then were rolled by solution treatment. The multilayer tubular structures of Janus nanoscrolls were revealed by scanning transmission electron microscopy observations. Atomic resolution elemental analysis confirmed that the Janus monolayers were rolled up with the Se-side surface on the outside. We found that the present nanoscrolls have the smallest diameter of about 5 nm, which is almost the same as the value predicted by the DFT calculation. The difference in work functions between the S- and Se-side surfaces was measured by Kelvin probe force microscopy, which is in good agreement with the theoretical prediction. Strong interlayer interactions and anisotropic optical responses of the Janus nanoscrolls were also revealed by Raman and photoluminescence spectroscopy.
RESUMEN
Background: There is a strong demand for remote monitoring systems to gather health data. This study investigated the safety, usefulness, and patient satisfaction in outpatient care using telehealth with real-time electrocardiogram (ECG) monitoring after catheter ablation. MethodsâandâResults: In all, 38 patients who underwent catheter ablation were followed up using telehealth. At the 3- and 6-month follow-up, a self-fitted Duranta ECG monitoring device was sent to the patient's home before the online consultation. Patients attached the devices themselves, and the doctors viewed the patients by video chat and performed real-time ECG monitoring. The frequency of hospital visits and the ECG monitoring duration were compared with conventional in-person follow-up data (n=102). The completion rate for telehealth follow-up was 32 of 38 patients (84%). The number of hospital visits during the 6 months was significantly lower with telehealth follow-up than with conventional follow-up (median [interquartile range] 1 [1-1] vs. 5 [3-5]; P<0.0001). However, the ECG monitoring duration was approximately 4-fold longer for the telehealth follow-up (median [interquartile range] 89 [64-117] vs. 24 [0.1-24] h; P<0.0001). No major adverse events were observed during the telehealth follow-up. Patient surveys showed high satisfaction with telehealth follow-up due to reduced hospital visits. Conclusions: A combination of telehealth follow-up with real-time ECG monitoring increased the ECG monitoring duration and patient satisfaction without any adverse events.
RESUMEN
Monolayers of transition metal dichalcogenides (TMDs) are an ideal 2D platform for studying a wide variety of electronic properties and potential applications due to their chemical diversity. Similarly, single-walled TMD nanotubes (SW-TMDNTs)-seamless cylinders of rolled-up TMD monolayers-are 1D materials that can exhibit tunable electronic properties depending on both their chirality and composition. However, much less has been explored about their geometrical structures and chemical variations due to their instability under ambient conditions. Here, the structural diversity of SW-TMDNTs templated by boron nitride nanotubes (BNNTs) is reported. The outer surfaces and inner cavities of the BNNTs promote and stabilize the coaxial growth of SW-TMDNTs with various diameters, including few-nanometers-wide species. The chiral indices (n,m) of individual SW-MoS2 NTs are assigned by high-resolution transmission electron microscopy, and statistical analyses reveals a broad chirality distribution ranging from zigzag to armchair configurations. Furthermore, this methodology can be applied to the synthesis of various TMDNTs, such as selenides and alloyed Mo1- x Wx S2 . Comprehensive microscopic and spectroscopic analyses also suggest the partial formation of Janus MoS2(1- x ) Se2 x nanotubes. The BNNT-templated reaction provides a universal platform to characterize the chirality-dependent properties of 1D nanotubes with various electronic structures.
RESUMEN
Transition metal dichalcogenide (TMDC) nanotubes exhibit unique physical properties due to their nanotube structures. The development of techniques for synthesizing TMDC nanotubes with controlled structures is very important for their science and applications. However, structural control efforts have been made only for the homostructures of TMDC nanotubes and not for their heterostructures that provide an important platform for their two-dimensional counterparts. In this study, we synthesized heterostructures of TMDC nanotubes, MoS2/WS2 heteronanotubes, and demonstrated a technique for controlling features of their structures, such as diameters, layer numbers, and crystallinity. The diameter of the heteronanotubes could be tuned with inner nanotube templates and was reduced by using small-diameter WS2 nanotubes. The layer number and crystallinity of the MoS2 outer wall could be controlled by controlling their precursors and synthesis temperatures, resulting in the formation of high-crystallinity TMDC heteronanotubes with specific chirality. This study can expand the research of van der Waals heterostructures.
RESUMEN
van der Waals (vdW) layered materials have attracted much attention because their physical properties can be controlled by varying the twist angle and layer composition. However, such twisted vdW assemblies are often prepared using mechanically exfoliated monolayer flakes with unintended shapes through a time-consuming search for such materials. Here, we report the rapid and dry fabrication of twisted multilayers using chemical vapor deposition (CVD) grown transition metal chalcogenide (TMDC) monolayers. By improving the adhesion of an acrylic resin stamp to the monolayers, the single crystals of various TMDC monolayers with desired grain size and density on a SiO2/Si substrate can be efficiently picked up. The present dry transfer process demonstrates the one-step fabrication of more than 100 twisted bilayers and the sequential stacking of a twisted 10-layer MoS2 single crystal. Furthermore, we also fabricated hBN-encapsulated TMDC monolayers and various twisted bilayers including MoSe2/MoS2, MoSe2/WSe2, and MoSe2/WS2. The interlayer interaction and quality of dry-transferred, CVD-grown TMDCs were characterized by using photoluminescence (PL), cathodoluminescence (CL) spectroscopy, and cross-sectional electron microscopy. The prominent PL peaks of interlayer excitons can be observed for MoSe2/MoS2 and MoSe2/WSe2 with small twist angles at room temperature. We also found that the optical spectra were locally modulated due to nanosized bubbles, which are formed by the presence of interface carbon impurities. The present findings indicate the widely applicable potential of the present method and enable an efficient search of the emergent optical and electrical properties of TMDC-based vdW heterostructures.
RESUMEN
INTRODUCTION: Intermuscular implantations of subcutaneous implantable cardioverter-defibrillators (S-ICD) have been recommended, but the position of the anterior border of the latissimus dorsi muscle (LDM) has not previously been evaluated in establishing an incision line to facilitate the intermuscular approach. The objective of this study is to evalua the position and trend of the anterior border of the LDM in patients who are candidates for implantable cardioverter-defibrillators. METHODS: The distance from the back to the anterior border of the LDM (A) and the anterior-posterior width of the chest wall (B) were measured on computed tomography retrospectively, and the ratio (=A/B) was used as the position of the anterior border of the LDM. In addition, the variability and factors affecting the values were evaluated. RESULTS: An analysis was performed on 78 patients, and the position of the anterior border of the LDM (=A/B) exhibited a normal distribution, with a mean value of 0.53 ± 0.062 (0.41-0.69). The position of the anterior border of the LDM tended to be more anterior in younger, taller, male, primary prevention, nonheart failure, low brain natriuretic peptide level, and nondiabetic patients. CONCLUSION: The position of the anterior border of the LDM varied from case to case with variable results. Conventional incisions on the midaxillary line may be inappropriate for intermuscular implantations, and the position of the anterior border of the LDM should be evaluated in each individual case to establish the incision line.
Asunto(s)
Desfibriladores Implantables , Músculos Superficiales de la Espalda , Herida Quirúrgica , Humanos , Masculino , Músculos Superficiales de la Espalda/diagnóstico por imagen , Músculos Superficiales de la Espalda/cirugía , Estudios Retrospectivos , Resultado del Tratamiento , Implantación de Prótesis/efectos adversos , Implantación de Prótesis/métodosRESUMEN
A methanol extract of rhizomes of Picrorhiza kurroa Royle ex Benth. (Plantaginaceae) showed hepatoprotective effects against D-galactosamine (D-GalN)/lipopolysaccharide (LPS)-induced liver injury in mice. We had previously isolated 46 compounds, including several types of iridoid glycosides, phenylethanoid glycosides, and aromatics, etc., from the extract. Among them, picroside II, androsin, and 4-hydroxy-3-methoxyacetophenone exhibited active hepatoprotective effects at doses of 50-100 mg/kg, per os (p.o.) To characterize the mechanisms of action of these isolates and to clarify the structural requirements of phenylethanoid glycosides for their hepatoprotective effects, their effects were assessed in in vitro studies on (i) D-GalN-induced cytotoxicity in mouse primary hepatocytes, (ii) LPS-induced nitric oxide (NO) production in mouse peritoneal macrophages, and (iii) tumor necrosis factor-α (TNF-α)-induced cytotoxicity in L929 cells. These isolates decreased the cytotoxicity caused by D-GalN without inhibiting LPS-induced macrophage activation and also reduced the sensitivity of hepatocytes to TNF-α. In addition, the structural requirements of phenylethanoids for the protective effects of D-GalN-induced cytotoxicity in mouse primary hepatocytes were evaluated.
Asunto(s)
Picrorhiza , Rizoma , Ratones , Animales , Rizoma/química , Picrorhiza/química , Lipopolisacáridos/toxicidad , Factor de Necrosis Tumoral alfa , Glicósidos Iridoides/análisis , Extractos Vegetales/farmacología , Extractos Vegetales/uso terapéutico , Extractos Vegetales/análisis , Galactosamina/toxicidadRESUMEN
Background: Ventricular tachycardia (VT) non-inducibility at the end of ablation is associated with a less likely VT recurrence. However, it is not clear whether we should use VT non-inducibility as a routine end point of VT ablation. The aim of this study was to evaluate VT recurrence in patients in whom VT non-inducibility was not achieved at the end of the radiofrequency (RF) ablation and the factors attributing to the VT recurrence. Methods: We analyzed that 62 patients in whom VT non-inducibility was not achieved at the end of the RF ablation were studied. Results: Over 2 years, 22 (35%) of the cases had VT recurrences. A multivariate analysis showed that an LVEF ≥35% (HR: 0.19; 95% CI: 0.06-0.49; p < .01) and elimination of the clinical VT as an acute ablation efficacy (HR: 0.23; 95% CI: 0.04-0.81; p = .02) were independent predictors of fewer VT recurrences. RF ablation was associated with a 91.1% reduction in VT episodes. Conclusion: Even if VT non-inducibility was not achieved, patients with an LVEF ≥35% or in whom the clinical VT could be eliminated might be prevented from having VT recurrences. The validity of the VT non-inducibility of any VT should be evaluated considering each patient's background and the results of the procedure.
RESUMEN
In-plane heterostructures of transition metal dichalcogenides (TMDCs) have attracted much attention for high-performance electronic and optoelectronic devices. To date, mainly monolayer-based in-plane heterostructures have been prepared by chemical vapor deposition (CVD), and their optical and electrical properties have been investigated. However, the low dielectric properties of monolayers prevent the generation of high concentrations of thermally excited carriers from doped impurities. To solve this issue, multilayer TMDCs are a promising component for various electronic devices due to the availability of degenerate semiconductors. Here, we report the fabrication and transport properties of multilayer TMDC-based in-plane heterostructures. The multilayer in-plane heterostructures are formed through CVD growth of multilayer MoS2 from the edges of mechanically exfoliated multilayer flakes of WSe2 or NbxMo1-xS2. In addition to the in-plane heterostructures, we also confirmed the vertical growth of MoS2 on the exfoliated flakes. For the WSe2/MoS2 sample, an abrupt composition change is confirmed by cross-sectional high-angle annular dark-field scanning transmission electron microscopy. Electrical transport measurements reveal that a tunneling current flows at the NbxMo1-xS2/MoS2 in-plane heterointerface, and the band alignment is changed from a staggered gap to a broken gap by electrostatic electron doping of MoS2. The formation of a staggered gap band alignment of NbxMo1-xS2/MoS2 is also supported by first-principles calculations.
RESUMEN
One-dimensional (1D) conducting materials are of great interest as potential building blocks for integrated nanocircuits. Ternary 1D transition-metal chalcogenides, consisting of M6X6 wires with intercalated A atoms (M = Mo or W; X = S, Se, or Te; A = alkali or rare metals, etc.), have attracted much attention due to their 1D metallic behavior, superconductivity, and mechanical flexibility. However, the conventional solid-state reaction usually produces micrometer-scale bulk crystals, limiting their potential use as nanoscale conductors. Here we demonstrate a versatile method to fabricate indium (In)-intercalated W6Te6 (In-W6Te6) bundles with a nanoscale thickness. We first prepared micrometer-long, crystalline bundles of van der Waals W6Te6 wires using chemical vapor deposition and intercalated In into the crystal via a vapor-phase reaction. Atomic-resolution electron microscopy revealed that In atoms were surrounded by three adjacent W6Te6 wires. First-principles calculations suggested that their wire-by-wire stacking can transform through postgrowth intercalation. Individual In-W6Te6 bundles exhibited metallic behavior, as theoretically predicted. We further identified the vibrational modes by combining polarized Raman spectroscopy and nonresonant Raman calculations.
RESUMEN
BACKGROUND: Lesion gaps assessed by late-gadolinium enhancement magnetic resonance imaging (LGE-MRI) are associated with the atrial fibrillation (AF) recurrence after pulmonary vein isolation. Animal studies have demonstrated that the catheter-contact force (CF), stability, and orientation are strongly associated with lesion formation. However, the impact of those procedural factors on the lesion characteristics associated with AF recurrence has not been well discussed. METHODS: A total of 30 patients with paroxysmal AF who underwent catheter ablation were retrospectively enrolled. Radiofrequency (RF) applications were performed with 35 W for 30 s in a point-by-point fashion under esophageal temperature monitoring. The inter-lesion distance was 4 mm. The lesions were visualized by LGE-MRI 3 months postprocedure and assessed by the LGE volume (ml), gap number (GN), and average gap length (AGL [mm]). The gaps were defined as nonenhancement sites of >4 mm. The procedural factors including the catheter-CF, stability, and orientation were calculated on the NavX system. RESULTS: Six (20%) of 30 patients had AF recurrences 12 months postablation. A univariate analysis demonstrated that the AGL was associated with AF recurrence (hazard ratio [HR]: 1.20, confidence interval [CI]: 1.03-1.42, p = .02). All AF recurrence were found in patients with an AGL of >7 mm. The catheter-CF and stability were associated with an AGL of >7 mm, but not the orientation (CF-HR: 0.62, CI: 0.39-0.97, p = .038; stability-HR: 0.8, CI: 0.66-0.98, p = .027). CONCLUSIONS: RF ablation with a low CF and poor catheter stability has a potential risk of creating large lesion gaps associated with AF recurrence.
Asunto(s)
Fibrilación Atrial , Ablación por Catéter , Venas Pulmonares , Humanos , Fibrilación Atrial/cirugía , Medios de Contraste , Gadolinio , Estudios Retrospectivos , Imagen por Resonancia Magnética/métodos , Ablación por Catéter/métodos , Recurrencia , Venas Pulmonares/cirugía , Atrios Cardíacos , Resultado del TratamientoRESUMEN
Background: It is uncertain whether cardiac resynchronization therapy with a defibrillator (CRT-D) provides better survival benefits than a CRT-pacemaker (CRT-P) in heart failure patients with a reduced ejection fraction (â¦35%, HFrEF) treated with contemporary HF therapy. Methods: We retrospectively analyzed the ventricular arrhythmia (VAs; sustained ventricular tachycardia/fibrillation) events in HFrEF patients who underwent CRT without a prior history of VAs or aborted sudden cardiac death before the CRT implantation. Between January/2010 and December/2020, a CRT device was implanted in 79 HFrEF patients (mean age: 69 ± 12 years, male: 57, ischemic cardiomyopathy: 16). CRT-D and CRT-P devices were implanted in 50 and 29 patients, respectively, at each physician's discretion. CRT-Ds were indicated in younger patients than were CRT-Ps (66 ± 12 vs. 73 ± 12 years, p = 0.03), but the gender distribution did not differ (female, 24% [12 of 50] vs. 35% [10 of 29], p = 0.44). The VA events during a median follow-up of 3.5-years (interquartile range [IQR]:1.6-5.5) and their predictors were analyzed. Results: VA events occurred in 9 patients with CRT-Ds (18%) and one with a CRT-P (3%, p = 0.08). The VA event rate was significantly lower in patients without a prior non-sustained ventricular tachycardia (NSVT: ≥3 beats; rate, ≥120 bpm; lasting <30 s, HR 0.05; 95% CI 0.01-0.30; p < 0.01) and females (HR 0.11; 95% CI 0.01-0.93; p = 0.04). Of note, no female patients without a prior history of NSVT experienced VA events. Conclusion: HFrEF CRT candidates without a prior history of NSVT and females may obtain less benefit from a primary preventive defibrillator indication.
RESUMEN
The intestine is inhabited by a large number of commensal bacteria that are immunologically non-self, potentially causing inflammation. However, in a healthy intestine, inflammation is strictly controlled at low levels to maintain homeostasis. We previously reported that the gut microbiota induce DNA methylation of the gene encoding Toll-like receptor (TLR) 4, a pattern recognition receptor that recognizes lipopolysaccharides of gram-negative bacteria, in colonic epithelial cells, suggesting its role in controlling intestinal inflammation. However, there remains a question of how gut microbiota cause methylation of only specific genes including TLR4, despite the fact that DNA methyltransferase (DNMT) is common to all genes targeted for methylation. Here, we identified RBM14 as an adaptor molecule that recruits DNMT to the TLR4 gene. RBM14 was shown to bind DNMT3 and be expressed at significantly higher levels in an intestinal epithelial cell (IEC) line with hypermethylated TLR4 gene than in an IEC line with hypomethylated TLR4 gene. In addition, RBM14 interacted with DNA regions of the TLR4 gene, and knockdown of RBM14 suppressed DNA methylation of the TLR4 gene in IECs. Furthermore, RBM14 expression was higher in colonic epithelial cells of conventional mice than in those of germ-free mice. Collectively, these results indicate that the gut microbiota induce methylation of the TLR4 gene in colonic epithelial cells by upregulating RBM14, which can recruit DNMT3 to the gene. The regulation of adaptor molecules such as RBM14, which bind to specific target genes and recruit DNMT, can explain, at least in part, how gut microbiota contribute to the maintenance of intestinal homeostasis through epigenetic control of specific gene expression in IECs.
RESUMEN
Herein, we introduced the versatility of free-base and zinc-metallated porphyrin (H2P and ZnP, respectively) to combine with boron azadipyrromethene (azaBDP) NIR absorbing species, for extending their photophysical interest and covalently anchored onto graphene. In particular, the covalent functionalization of graphene with those H2P-azaBDP and ZnP-azaBDP dyads ensured an invariable structure, in which both chromophores and graphene are in intimate contact, free of aggregations and impurities. Both H2P-azaBDP and ZnP-azaBDP dyads were found to perform energy transfer processes between the chromophores, however, only ZnP-azaBDP confirmed additional charge separation between the chromophores yielding the ZnPË+-azaBDPË- charge-separated state. On the other hand, graphene in (H2P-azaBDP)-graphene and (ZnP-azaBDP)-graphene hybrids was found to act as an electron donor, yielding (H2P-azaBDPË-)-grapheneË+ and (ZnP-azaBDPË-)-grapheneË+ charge-separated states at an ultrafast timescale. The creation of such donor-acceptor systems, featuring graphene as an electron donor and Vis-to-NIR electron-acceptor dyads, expands their utility when considered in optoelectronic applications.
RESUMEN
Rolling two-dimensional (2D) materials into 1D nanotubes allows for greater functionality. Boron-nitride nanotubes (BNNTs) can serve as insulating 1D templates for the coaxial growth of guest nanotubes, without interfering with property characterization. However, their application as 1D templates has been greatly hindered by their poor dispersibility, inevitably resulting in the formation of thick bundles. Here we present the facile preparation of well-dispersed BNNT templates via surfactant dispersions and synthesis of 1D van der Waals heterostructures based on the BNNTs. Comprehensive microscopic analyses show the isolation of clean, high-quality BNNTs. Statistical analyses revealed that small-diameter double-walled BNNTs are highly enriched by chemical peeling of BN sidewalls through the sonication process. We further demonstrate that the isolated BNNTs can template the coaxial growth of carbon and MoS2 nanotubes by using chemical vapor deposition. The present strategy can be applied to the synthesis of a variety of nanotubes, thereby allowing for their characterization.
RESUMEN
Apoptotic cell death is a critical step in organism development and tissue homeostasis. Apoptotic cells affect immune cell activities in normal tissues. It is not clear whether similar cell death machinery causes tumor environments to evade anti-tumor immune responses. Here, using a mouse transplant model, we found a large number of tumor cells undergoing intrinsic apoptosis in tumors derived from the 4T1 breast cancer cell line, where neutrophils significantly accumulated. Interestingly, these apoptotic 4T1 tumor cells directly induced neutrophil extracellular traps (NETs) in a pannexin 1 (Panx1) channel-dependent manner, and knockdown of Panx1 in 4T1 cells led to a reduction in tumor size. Spermidine released through Panx1 from apoptotic 4T1 cells induced NETs in bone marrow-derived neutrophils in vitro. In addition, inhibition of spermidine synthesis suppressed tumor growth in the mouse transplant model. Collectively, our data suggested a new immune-escape mechanism for tumors by Panx1-mediated secretome from intrinsic apoptotic cells, which may provide a new therapeutic target for cancer.
Asunto(s)
Adenosina Trifosfato , Conexinas , Adenosina Trifosfato/metabolismo , Conexinas/metabolismo , Proteínas del Tejido Nervioso/metabolismo , Neutrófilos/metabolismo , Secretoma , Espermidina/metabolismo , Microambiente TumoralRESUMEN
The diverse series of transition metal dichalcogenide (TMDC) materials has been employed in various optoelectronic applications, such as photodetectors, light-emitting diodes, and lasers. Typically, the detection or emission range of optoelectronic devices is unique to the bandgap of the active material. Therefore, to improve the capability of these devices, extensive efforts have been devoted to tune the bandgap, such as gating, strain, and dielectric engineering. However, the controllability of these methods is severely limited (typically ≈0.1 eV). In contrast, alloying TMDCs is an effective approach that yields a composition-dependent bandgap and enables light emissions over a wide range. In this study, a color-tunable light-emitting device using compositionally graded TMDC alloys is fabricated. The monolayer WS2 /WSe2 alloy grown by chemical vapor deposition shows a spatial gradient in the light-emission energy, which varies from 2.1 to 1.7 eV. This alloy is incorporated in an electrolyte-based light-emitting device structure that can tune the recombination zone laterally. Thus, a continuous and reversible color-tunable light-emitting device is successfully fabricated by controlling the light-emitting positions. The results provide a new approach for exploring monolayer semiconductor-based broadband optical applications.