RESUMEN
Additive manufacturing can develop regenerative scaffolds for wound healing. 3D printing offers meticulous porosity, mechanical integrity, cell adhesion and cost-effectiveness. Herein, we prepared ink composed of carboxymethyl cellulose (CMC), polyvinylpyrrolidone (PVP), collagen, and oregano extract for the fabrication of tissue constructs. The blend was optimized to form a homogeneous ink and rheological characterization demonstrated shear thinning behavior. The scaffolds were printed using Direct Ink Write (DIW) at a flow speed of 4 mm3/s and a layer height of 0.18 mm. The fabricated scaffolds demonstrated an ultimate tensile strength (UTS) and toughness of 730 KPa and 2.72 MJ/m3, respectively. Scanning Electron Microscopy (SEM) revealed an average pore size of 300 ± 30 µm. Fourier transform infrared spectroscopy (FTIR) analysis confirmed that all materials were present. The contact angle of the composite scaffold was 68° ± 1°. Moreover, the scaffolds presented 82 % mass loss (degradation) in phosphate buffer saline (PBS) over 14 days. The composite scaffold exhibited inhibition zones of 9 mm and 12 mm against Staphylococcus aureus and Escherichia coli, respectively. The PVP/CMC/collagen/oregano 3D printed scaffolds exhibited excellent biocompatibility with the mesenchymal stem cells and humman dermal fibroblast cells, confirmed by water-soluble tetrazolium - 8 (WST-8) assay (test conducted for 7 days). The enhanced angiogenic potential of said scaffold was assesed by release of vascular endothelial growth factor followed by further validation through in-vivo CAM assay. Thus, confirming suitability for the potential wound healing application.
RESUMEN
Herein, we synthesized hydrogel films from crosslinked polyethylene oxide (PEO) and guar gum (GG) which can offer hydrophilicity, antibacterial efficacy, and neovascularization. This study focuses on synthesis and material/biological characterization of rosemary (RM) and citric acid (CA) loaded PEO/GG hydrogel films. Scanning Electron Microscopy images confirmed the porous structure of the developed hydrogel film matrix (PEO/GG) and the dispersion of RM and CA within it. This porous structure promotes moisture adsorption, cell attachment, proliferation, and tissue layer formation. Fourier Transform Infrared Spectroscopy (FTIR) further validated the crosslinking of the PEO/GG matrix, as confirmed by the appearance of C-O-C linkage in the FTIR spectrum. PEO/GG and PEO/GG/RM/CA revealed similar degradation and release kinetics in Dulbecco's Modified Eagle Medium, Simulated Body Fluid, and Phosphate Buffer Saline (degradation of â¼55 % and release of â¼60 % RM in 168 h.). The developed hydrogel film exhibited a zone of inhibition against Escherichia. coli (2 mm) and Staphylococcus. aureus (9 mm), which can be attributed to the presence of RM in the hydrogel film. Furthermore, incorporating CA in the hydrogel film promoted neovascularization, as confirmed by the Chorioallantoic Membrane Assay. The developed RM and CA-loaded PEO/GG-based hydrogel films offered suitable in-vitro properties that may aid in potential wound healing applications.
Asunto(s)
Antibacterianos , Liberación de Fármacos , Galactanos , Hidrogeles , Mananos , Gomas de Plantas , Polietilenglicoles , Mananos/química , Galactanos/química , Gomas de Plantas/química , Polietilenglicoles/química , Hidrogeles/química , Animales , Antibacterianos/farmacología , Antibacterianos/química , Cinética , Staphylococcus aureus/efectos de los fármacos , Escherichia coli/efectos de los fármacos , Membrana Corioalantoides/efectos de los fármacos , Portadores de Fármacos/químicaRESUMEN
Patient-specific fabrication of scaffold/implant requires an engineering approach to manufacture the ideal scaffold. Herein, we design and 3D print scaffolds comprised of polyether-ether-ketone (PEEK) and sodium-carboxymethyl cellulose (Na-CMC). The fabricated scaffold was dip coated with Zn and Mn doped bioactive glass nanoparticles (Zn-Mn MBGNs). The synthesized ink exhibit suitable shear-thinning behavior for direct ink write (DIW) 3D printing. The scaffolds were crafted with precision, featuring 85% porosity, 0.3 mm layer height, and 1.5 mm/s printing speed at room temperature. Scanning electron microscopy images reveal a well-defined scaffold with an average pore size of 600 ± 30 µm. The energy dispersive X-ray spectroscopy analysis confirmed a well dispersed/uniform coating of Zn-Mn MBGNs on the PEEK/Na-CMC scaffold. Fourier transform infrared spectroscopy approved the presence of PEEK, CMC, and Zn-Mn MBGNs. The tensile test revealed a Young's modulus of 2.05 GPa. Antibacterial assays demonstrate inhibition zone against Staphylococcus aureus and Escherichia Coli strains. Chick Chorioallantoic Membrane assays also present significant angiogenesis potential, owing to the antigenic nature of Zn-Mn MBGNs. WST-8 cell viability assays depicted cell proliferation, with a 103% viability after 7 days of culture. This study suggests that the PEEK/Na-CMC scaffolds coated with Zn-Mn MBGNs are an excellent candidate for osteoporotic fracture treatment. Thus, the fabricated scaffold can offer multifaceted properties for enhanced patient outcomes in the bone tissue regeneration.
Asunto(s)
Benzofenonas , Carboximetilcelulosa de Sodio , Vidrio , Cetonas , Manganeso , Nanopartículas , Polietilenglicoles , Polímeros , Impresión Tridimensional , Staphylococcus aureus , Andamios del Tejido , Zinc , Porosidad , Benzofenonas/química , Vidrio/química , Cetonas/química , Cetonas/farmacología , Andamios del Tejido/química , Staphylococcus aureus/efectos de los fármacos , Carboximetilcelulosa de Sodio/química , Nanopartículas/química , Zinc/química , Zinc/farmacología , Polímeros/química , Manganeso/química , Polietilenglicoles/química , Antibacterianos/química , Antibacterianos/farmacología , Animales , Escherichia coli/efectos de los fármacos , Ensayo de Materiales , HumanosRESUMEN
The most important challenge faced in designing orthopedic devices is to control the leaching of ions from the substrate material, and to prevent biofilm formation. Accordingly, the surgical grade stainless steel (316L SS) was electrophoretically deposited with functional composition of biopolymers and bioceramics. The composite coating consisted of: Bioglass (BG), hydroxyapatite (HA), and lawsone, that were loaded into a polymeric matrix of Xanthan Dialdehyde/Chondroitin Sulfate (XDA/CS). The parameters and final composition for electrophoretic deposition were optimized through trial-and-error approach. The composite coating exhibited significant adhesion strength of "4B" (ASTM D3359) with the substrate, suitable wettability of contact angle 48°, and an optimum average surface roughness of 0.32 µm. Thus, promoting proliferation and attachment of bone-forming cells, transcription factors, and proteins. Fourier transformed infrared spectroscopic analysis revealed a strong polymeric network formation between XDA and CS. scanning electron microscopy and energy dispersive X-ray spectroscopy analysis displayed a homogenous surface with invariable dispersion of HA and BG particles. The adhesion, hydrant behavior, and topography of said coatings was optimal to design orthopedic implant devices. The said coatings exhibited a clear inhibition zone of 21.65 mm and 21.04 mm with no bacterial growth against Staphylococcus aureus (S. Aureus) and Escherichia coli (E. Coli) respectively, confirming the antibacterial potential. Furthermore, the crystals related to calcium (Ca) and HA were seen after 28 days of submersion in simulated body fluid. The corrosion current density, of the above-mentioned coating was minimal as compared to the bare 316L SS substrate. The results infer that XDA/CS/BG/HA/lawsone based composite coating can be a candidate to design coatings for orthopedic implant devices.
Asunto(s)
Durapatita , Staphylococcus aureus , Durapatita/química , Escherichia coli , Polímeros/farmacología , Materiales Biocompatibles Revestidos/farmacología , Materiales Biocompatibles Revestidos/químicaRESUMEN
Additive manufacturing (also known as 3D printing) is a promising method for producing patient-specific implants. In the present study, sodium alginate (Na-ALG)/poly(vinyl alcohol) (PVA) polymer blends of varying ratios (1:0, 3:1, 1:1, and 1:3) were used to produce tailored-designed skin scaffolds using a 3D bioprinter. Samples of skin scaffolds were printed at 20 layers with a layer height of 0.15 mm using a needle with an inner diameter of 330 µm while maintaining the extrusion speed, extrusion width, and fill density at 10 mm/s, 0.2 mm, and 85%, respectively. The Na-ALG/PVA blend with a 3:1 ratio showed the best printability due to its good viscosity and minimal nozzle leakage, allowing for the fabrication of skin scaffolds with high fidelity and the desired morphological characteristics. Then, copper-silver doped mesoporous bioactive glass nanoparticles (Cu-Ag MBGNs) were incorporated into the Na-ALG/PVA blend (which had already been prepared by using a Na-ALG:PVA ratio of 3:1) in order to obtain therapeutic (angiogenic and antibacterial) effects. The fabricated Na-ALG/PVA/Cu-Ag MBGNs biocomposite scaffolds with dimensions of 20 mm× 20 × 3 mm3 and pore size of 400 ± 60 µm exhibited a promising fidelity. The presence of chemical bonds attributed to Na-ALG, PVA, and Cu-Ag MBGNs and the uniform distribution of Na, C, and O elements within the microstructure of the scaffolds were confirmed by EDX, SEM, and FTIR analyses. The scaffolds were hydrophilic and exhibited proper swelling and degradation behavior for skin tissue engineering. According to the inhibition halo test, the scaffolds exhibited strong antibacterial activity against Staphylococcus aureus and Escherichia coli. The cytocompatibility to human-derived fibroblast cells was confirmed by the WST-8 assay and in vivo Chorioallantoic Membrane Assay. In addition, Na-ALG/PVA/Cu-Ag MBGNs showed angiogenic potential, exhibiting favorable wound healing properties.
Asunto(s)
Nanopartículas , Alcohol Polivinílico , Humanos , Cobre , Plata , Ingeniería de Tejidos , Alginatos , Antibacterianos/farmacología , Escherichia coliRESUMEN
OBJECTIVE: To determine efficacy of diclofenac suppository in reducing post-ERCP pancreatitis (PEP) and identify risk factors for PEP. METHODS: This is a placebo-based prospective study at Department of Medicine & Gastroenterology, Services Institute of Medical Sciences / Services Hospital, Lahore performed from January 2018 to June 2019. Patients were randomized to receive diclofenac suppository or glycerine suppository before ERCP. Both groups were compared for PEP using chi square x2 test while risk factors for PEP were determined using binary logistic regression. RESULTS: Total of 165 patients with mean age 49.1(±15.2) and male to female ratio 1/1.6 (63/102) were included. Among 82 (49.7%) patients in diclofenac group, 8 (9.7%) developed pancreatitis while 19(22.9%) of 83(50.3%) in placebo group had PEP (p value 0.02). After multivariate analysis, age>45 years (p value 0.014, OR 3.2), Bilirubin >3 mg/dl (p value 0.004 OR 3.58), time to cannulation> 5 minutes (p value<0.000 OR 9.2), use of precut (p value< 0.000 OR 4.9), pancreatic duct cannulation (p value 0.000 OR 5.46) and total procedure time >30 minutes (p value 0.01 OR 3.92) were risk factors for PEP. CONCLUSION: Pre-procedure Diclofenac suppository reduces post-ERCP pancreatitis. Age > 45 years, serum bilirubin > 3 mg/dl, cannulation time > 5 minutes, use of precut, pancreatic duct cannulation and procedure time > 30 minutes are risk factors for post-ERCP pancreatitis.