RESUMEN
Plastic recycling reduces the wastage of potentially useful materials as well as the consumption of virgin materials, thereby lowering the energy consumption, air pollution by incineration, soil and water pollution by landfilling. Plastics used in the biomedical sector have played a significant role. Reducing the transmission of the virus while protecting the human life in particular the frontline workers. Enormous volumes of plastics in biomedical waste have been observed during the outbreak of the pandemic COVID-19. This has resulted from the extensive use of personal protective equipment such as masks, gloves, face shields, bottles, sanitizers, gowns, and other medical plastics which has created challenges to the existing waste management system in the developing countries. The current review focuses on the biomedical waste and its classification, disinfection, and recycling technology of different types of plastics waste generated in the sector and their corresponding approaches toward end-of-life option and value addition. This review provides a broader overview of the process to reduce the volume of plastics from biomedical waste directly entering the landfill while providing a knowledge step toward the conversion of "waste" to "wealth." An average of 25% of the recyclable plastics are present in biomedical waste. All the processes discussed in this article accounts for cleaner techniques and a sustainable approach to the treatment of biomedical waste.
RESUMEN
Mangroves play a key role in ecosystem balancing and climate change mitigation. It acts as a source and sink of methane (CH4), a major greenhouse gas responsible for climate change. Energy metabolic pathways of methane production (methanogenesis) and oxidation (methanotrophy) are directly driven by sulphur (S) and nitrogen (N) metabolism and salinity in coastal wetlands. To investigate, how mangrove-degradations, affect the source-sink behaviour of CH4; the pathways of CH4, S and N were studied through whole-genome metagenomic approach. Soil samples were collected from degraded and undisturbed mangrove systems in Sundarban, India. Structural and functional microbial diversities (KEGG pathways) of CH4, S and N metabolism were analysed and correlated with labile carbon pools and physico-chemical properties of soil. Overall, the acetoclastic pathway of methanogenesis was dominant. However, the relative proportion of conversion of CO2 to CH4 was more in degraded mangroves. Methane oxidation was higher in undisturbed mangroves and the serine pathway was dominant. After serine, the ribulose monophosphate pathway of CH4 oxidation was dominant in degraded mangrove, while the xylulose monophosphate pathway was dominant in undisturbed site as it is more tolerant to salinity and higher pH. The assimilatory pathway (AMP) of S-metabolism was dominant in both systems. But in AMP pathway, adenosine triphosphate sulfurylase enzyme reads were higher in degraded mangrove, while NADPH-sulfite reductase abundance was higher in undisturbed mangrove due to higher salinity, and pH. In N-metabolism, the denitrification pathway was predominant in degraded sites, whereas the dissimilatory nitrate reduction pathway was dominant in undisturbed mangroves. The relative ratios of sulphur reducing bacteria (SRB): methanogens were higher in degraded mangrove; however, methanotrophs:methanogens was higher in undisturbed mangrove indicated lower source and greater sink capacity of CH4 in the system. Microbial manipulation in mangrove-rhizosphere for regulating major energy metabolic pathways of methane could open-up a new window of climate change mitigation in coastal wetlands.
Asunto(s)
Ecosistema , Metano , Dióxido de Carbono/análisis , Cambio Climático , Redes y Vías Metabólicas , Nitrógeno , Suelo , Azufre , HumedalesRESUMEN
The role of diketopyrrolopyrrole (DPP-H) as an additive on the ionic conductivity of poly(ethylene oxide) (PEO)-based gel polymer electrolytes (GPE) was studied for DSSC applications. The pure PEO/PC/KI/TPAI/I2 GPE was prepared with a mixture of propylene carbonate (PC) as a non-volatile plasticizer and iodide salts, such as potassium iodide (KI), tetrapropylammonium iodide (TPAI) and iodine (I2), together with PEO. The modified GPEs were prepared with different weight percentage (wt%) ratios (0.5%, 0.75%, 1% and 1.25%) of DPP-H using acetonitrile as a solvent. The polymer gel electrolytes were characterized by X-ray diffractometer (XRD) and Fourier transform infrared spectroscopy (FTIR), and the electrochemical properties were analyzed to relate the nature of the polymer and iodine ion conducting properties. The pure PEO/PC/TPAI/KI/I2 electrolyte exhibited an ionic conductivity value of 0.084 mS·cm-1 at room temperature. Upon the optimized addition of DPP-H (0.75 wt%), the ionic conductivity was found to be improved to a maximum value of 0.393 mS·cm-1, and the highest diffusion coefficient of 1.02 × 10-6 cm2 s-1 was observed. The optimized GPEs photovoltaic characterization studies showed higher power conversion efficiency (PCE) of 6.69% for DSSC under light illumination intensity of 100 mW cm-2. The same was compared with pure electrolyte, which delivered PCE of 4.39%. To gain an in-depth understanding of the interfacial resistance of the fabricated devices, the electron lifetime and transient photo response was analyzed. These above studies showed that prepared GPE could be an efficient alternative for traditional DSSCs with liquid electrolyte.
RESUMEN
Mangrove provides significant ecosystem services, however, 40% of tropical mangrove was lost in last century due to climate change induced sea-level rise and anthropogenic activities. Sundarban-India, the largest contiguous mangrove of the world lost 10.5% of its green during 1930-2013 which primarily converted to rice-based systems. Presently degraded mangrove and adjacent rice ecology in Sundarban-India placed side by side and create typical ecology which is distinct in nature in respect to soil physicochemical properties, carbon dynamics, and microbial diversities. We investigated the structural and functional diversities of bacteria and archaea through Illumina MiSeq metagenomic analysis using V3-V4 region of 16S rRNA gene approach that drives greenhouse gases emission and carbon-pools. Remote sensing-data base were used to select the sites for collecting the soil and gas samples. The methane and nitrous oxide emissions were lower in mangrove (-0.04 mg m-2 h-1 and -52.8 µg m-2 h-1) than rice (0.26 mg m-2 h-1 and 44.7 µg m-2 h-1) due to less availability of carbon-substrates and higher sulphate availability (85.8% more than rice). The soil labile carbon-pools were more in mangrove, but lower microbial activities were noticed due to stress conditions. A unique microbial feature indicated by higher methanotrophs: methanogens (11.2), sulphur reducing bacteria (SRB): methanogens (93.2) ratios and lower functional diversity (7.5%) in mangrove than rice. These could be the key drivers of lower global warming potential (GWP) in mangrove that make it a green production system. Therefore, labile carbon build-up potential (38%) with less GWP (63%) even in degraded-mangrove makes it a clean production system than wetland-rice that has high potential to climate change mitigation. The whole genome metagenomic analysis would be the future research priority to identify the predominant enzymatic pathways which govern the methanogenesis and methanotrophy in this system.
Asunto(s)
Oryza , Humedales , Agricultura , Archaea/genética , Bacterias/genética , Ecosistema , India , Metano/análisis , Óxido Nitroso/análisis , ARN Ribosómico 16S/genética , SueloRESUMEN
Endotoxin, the outer cell wall membrane lipopolysaccharide component of the Gram-negative bacteria is a factor responsible for a number of complications/disorders and plays important role in the associated with pathophysiological complications and pathogenesis of many diseases in animals. Unlike higher animals which are extremely sensitive to endotoxin, fish are found to be resistant to endotoxic shock and earlier studies though limited have demonstrated the patho-physiological, immuno-endocrinological and immuno-neurological effects of LPS/endotoxin in aquatic animals including fish. Herein in the present investigation, the effect of pure endotoxin on immuno-haematological parameters of stinging catfish, Heteropneustes fossilis ranging from 50-60 g was studied by intraperitoneally injecting 0.1, 0.05 and 0.01 mg endotoxin per fish. H. fossilis yearlings were found to resist the endotoxin concentration up to 0.1 mg without any mortality. While, no change in immune parameters was recorded in stinging catfish injected with low dose of endotoxin (0.01 mg), most of the immune parameters were found to be significantly elevated in catfish injected with 0.05 mg endotoxin. Different serum and immune parameters like protein, globulin, lysozyme, respiratory burst activity, myeloperoxidase activity, natural agglutination titre were found to be significantly high (p < 0.01) at a dose of 0.05 mg endotoxin per fish. On the contrary, most of these parameters were decreased at high dose i.e., 0.1 mg endotoxin per fish, thereby indicating the immuno-suppressive effect of the endotoxin. The findings of the modulation of innate immunity also corroborated with the results of Aeromonas hydrophila pathogen challenge study with highest percent of mortality in group injected with 0.1 mg endotoxin per fish and least percentage in group injected with 0.05 mg endotoxin per fish.
RESUMEN
Epoxy-polydimethylsiloxane-graphene oxide (EPG) nanocomposite coatings were successfully developed by loading different wt% of graphene oxide nanosheets (GNs) into an epoxy-hydroxy-terminated-polydimethylsiloxane (EP-hPD) matrix via a facile in situ preparation technique. The inclusion of GNs into EPN led to an increase in modulus of elasticity and tensile strength up to 1570.46 MPa and 31.54 MPa, respectively, in the case of 1 wt% loading of GNs in the EP-hPD matrix. Also, an increase in the water contact angle from 90.1° to 115.2°, 104.5° and 101.7° was discerned at 1, 3 and 5 wt% loadings of GNs respectively. Taber abrasion results demonstrated a decrease in abrasion loss by 33.3% at 1 wt% loading of GNs in comparison to the unreinforced coating. An improvement in the glass transition temperature (Tg) was observed from 63.5 °C for the neat sample to 77.6 °C, 76.3 °C and 71.6 °C for the 1, 3 and 5 wt% EPG nanocomposites, respectively. An inevitable enhancement in the properties of the nanocomposites was affirmed due to the synergistic effect of GNs dispersed within the EP-hPD blend matrix. The prominent findings of this work include a minimum corrosion rate of 0.73 × 10-2 mm per year and upgradation in the antifouling performance of the nanocomposite coatings in comparison to the neat coating.
RESUMEN
Extreme complexity in the range of metallic and non-metallic parts present in waste printed circuit boards leads to incineration for collecting valuable metals. The non-metallic parts of the printed circuit board can be used effectively without affecting the environment. In this study, the non-metallic parts of the printed circuit board, which is made up by cross-linked resin and fibre, was used as a filler in recycled plasticised polyvinyl chloride collected from waste wires and cables. The properties of the plasticised polyvinyl chloride matrix and plasticised polyvinyl chloride-non-metallic parts of printed circuit board composite were compared with each other by means of mechanical properties and thermal properties. Both mechanical and thermal properties results indicated that incorporation of non-metallic parts of printed circuit board significantly improved the hardness, stiffness, abrasion resistance and thermal stability of plasticised polyvinyl chloride-non-metallic parts of printed circuit board composite; however, the tensile strength of the composite material is not improved because of poor adhesion between the plasticised polyvinyl chloride matrix and non-metallic parts of printed circuit board filler. The poor chemical interaction is also observed from Fourier transform infrared spectroscopy results. This plasticised polyvinyl chloride-non-metallic parts of printed circuit board composite can reduce the leaching of a hazardous element from the printed circuit board with effective utilisation of plastics fraction from waste wires and cables.
Asunto(s)
Residuos Electrónicos , Cloruro de Polivinilo , Incineración , Metales , ReciclajeRESUMEN
The assessment of cucurbituril (CBn) for selective removal of actinides from nuclear waste streams requires comprehensive understanding of binding parameters and coordination of these complexes. The present work is the first experimental report on complexation of actinide ion with Cucurbit[5]uril (CB5) in solution. The thermodynamic parameters (ΔG, ΔH and ΔS) for complexation of CB5 with U(VI) in formic acid water medium were determined using microcalorimetry and UV-Vis spectroscopy. The enthalpy and entropy of complexation revealed the partial binding of U(VI) to CB5 portal. The partial binding was confirmed by spectroscopic techniques viz. extended X absorption fine structure spectroscopy (EXAFS), 1H and 13C NMR. The EXAFS χ(r) versus r spectra for U-CB5 complex has been fitted from 1.4 to 3.5â¯Å with two oxygen shells and a carbon shell. The presence of three carbon atom in secondary shell shows the involvement of only three carbonyl oxygens directly bonding to U(VI) which is in contrast to that calculated from gas phase DFT calculation of unhydrated system. The combined effect of hydration and formic acid encapsulation led to the enhanced stability of partially bound U(VI) to CB5. In the present work the binding of formic acid has also been studied by fluorescence spectroscopy. ESI-MS data shows the unusual stabilization of U(VI) by CB5 in gas phase.
RESUMEN
Providing several functionalities to a single material is an emerging challenge with many industrial prospects in materials sciences. Self-assembled organic-inorganic hybrid materials endowed with emission properties are part of these new materials. While the inorganic moieties provide emissivity, the organic part confers nanostructuration and processability. Here we describe how columnar arrangements can be obtained by assembling, via electrostatic interactions, isometric anionic inorganic nanoemitters, namely [Re6Se8(CN)6]4-, with imidazolium counter cations bearing triphenylene units. The resulting hybrids combine the emission of both components and energy transfer has been evidenced between both entities. Hole charge mobilities of the hybrid organic-inorganic columnar mesophases were also evaluated by the space charge limited current (SCLC) method.
RESUMEN
We report on the first observation of an approximant structure to the recently discovered two-dimensional oxide quasicrystal. Using scanning tunneling microscopy, low-energy electron diffraction, and surface x-ray diffraction in combination with ab initio calculations, the atomic structure and the bonding scheme are determined. The oxide approximant follows a 3^{2}.4.3.4 Archimedean tiling. Ti atoms reside at the corners of each tiling element and are threefold coordinated to oxygen atoms. Ba atoms separate the TiO_{3} clusters, leading to a fundamental edge length of the tiling 6.7 Å.
RESUMEN
The ternary polyionic inorganic compound Cs2Mo6Br14 and 18-crown-6 ethers bearing two o-terphenyl units have been combined to design phosphorescent columnar liquid crystalline hybrid materials. The obtained host-guest complexes are very stable even at high temperatures. Depending on their surrounding atmosphere, these hybrids switch reversibly from a high-to-low luminescence state and show a very stable emission intensity up to 140 °C.
RESUMEN
Cellulose microfibrils (CMF) were extracted from sisal fiber and characterized. Biocomposites of PLA reinforced with CMF were fabricated employing melt blending technique followed by injection moulding. The biocomposites were subjected to various characterization studies to investigate the effect of CMF within the PLA matrix. Differential scanning calorimetry (DSC) measurements confirmed that the addition of CMF accelerates the crystallization process of PLA matrix. Addition of 5 wt.% of CMF with and without compatibilizers and plasticizers such as maleic anhydride, polyethylene glycol and acetyltributyl citrate in PLA improved the crystallization of PLA up to 100 °C. MA grafting gave moderate effects on both the stiffness and ductility, exhibiting optimum properties.
Asunto(s)
Celulosa/química , Ácido Láctico/química , Fenómenos Mecánicos , Polímeros/química , Materiales Biocompatibles/química , Rastreo Diferencial de Calorimetría , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Poliésteres , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Difracción de Rayos XRESUMEN
The magneto-transport properties of single proton-implanted ZnO and of Li(7%)-doped ZnO microwires have been studied. The as-grown microwires were highly insulating and not magnetic. After proton implantation the Li(7%) doped ZnO microwires showed a non-monotonous behavior of the negative magneto-resistance (MR) at temperature above 150 K. This is in contrast to the monotonous NMR observed below 50 K for proton-implanted ZnO. The observed difference in the transport properties of the wires is related to the amount of stable Zn vacancies created at the near surface region by the proton implantation and Li doping. The magnetic field dependence of the resistance might be explained by the formation of a magnetic/non-magnetic heterostructure in the wire after proton implantation.
RESUMEN
The bioequivalence of two different tablet formulations containing losartan potassium 100 mg was determined in healthy volunteers after a single oral dose in a randomized crossover study. Test and reference products were administered to 60 volunteers with 240 ml water after overnight fasting. Plasma concentrations of losartan and its active carboxylic acid metabolite were monitored over a period of 36 h after drug administration by validated LC/MS/MS analytical method. The pharmacokinetic parameters Cmax, AUC0-t, AUC0-∞, AUC0-t/AUC0-∞, tmax, Kel and t½ were determined from plasma concentration time profile of both formulations for losartan and its active metabolite losartan carboxylic acid and were found to be in good agreement. The carboxylic acid metabolite was considered for profiling purpose only. The analysis of variance did not show any significant difference between the two formulations and 90% confidence intervals for the ratio of Cmax (84.89-104.09%), AUC0-t (95.84-102.84%) and AUC0-∞ (96.43-103.25%) values for losartan between the test and reference products were within the 80-125% interval, satisfying the bioequivalence criteria of the US FDA guidelines. These results indicate that the test and the reference products of losartan potassium are bioequivalent and, thus, may be prescribed interchangeably.
RESUMEN
Cucurbit[n]urils (CBn) are a new class of macrocyclic cage compounds capable of binding organic and inorganic species, owing to their unique pumpkin like structure comprising of both a hydrophobic cavity and a hydrophilic portal. The thermodynamics of the complexation of Eu(III) with CBn of a different cavity size viz. cucurbit[5]uril (CB5) and cucurbit[7]uril (CB7) has been studied by UV-Vis spectroscopy and calorimetry at 25 °C whereas the structure of the complexes was investigated using time resolved fluorescence spectroscopy (TRFS) and extended X-ray absorption fine structure spectroscopy (EXAFS) in a formic acid-water mixture (50 wt%). This is the first report on the structural investigation of Eu-CBn complexes in solution. The thermodynamic data (ΔG, ΔH and ΔS) for Eu(III) complexation with CBn reveal the formation of a 1 : 1 complex with CB5, while both 1 : 1 and 1 : 2 complexes are observed with CB7. The signatures of these species are observed in ESI-MS measurements, which corroborates with the species postulated in thermodynamic studies. The complexation reactions are found to be driven by ΔS as ΔH is either small negative or positive indicating the formation of inner sphere complexes, which is in line with TRFS and EXAFS results. These studies show that Eu(III) caps one of the CB5 portals by binding with all the carbonyl groups in the 1 : 1 Eu-CB5 complex, whereas in the 1 : 1 Eu-CB7 complex, Eu(III) interacts with only a few of the carbonyl groups of CB7. The computational studies (DFT calculations) on Eu-CB5 and Eu-CB7 complexes further support the experimental data.
Asunto(s)
Hidrocarburos Aromáticos con Puentes/química , Complejos de Coordinación/química , Europio/química , Imidazoles/química , Conformación Molecular , Análisis Espectral/métodos , TermodinámicaRESUMEN
The emergence of diseases and mortalities in aquaculture and development of antibiotics resistance in aquatic microbes, has renewed a great interest towards alternative methods of prevention and control of diseases. Nanoparticles have enormous potential in controlling human and animal pathogens and have scope of application in aquaculture. The present investigation was carried out to find out suitable nanoparticles having antimicrobial effect against aquatic microbes. Different commercial as well as laboratory synthesized metal and metal oxide nanoparticles were screened for their antimicrobial activities against a wide range of bacterial and fungal agents including certain freshwater cyanobacteria. Among different nanoparticles, synthesized copper oxide (CuO), zinc oxide (ZnO), silver (Ag) and silver doped titanium dioxide (Ag-TiO2) showed broad spectrum antibacterial activity. On the contrary, nanoparticles like Zn and ZnO showed antifungal activity against fungi like Penicillium and Mucor species. Since CuO, ZnO and Ag nanoparticles showed higher antimicrobial activity, they may be explored for aquaculture use.
Asunto(s)
Antiinfecciosos/farmacología , Acuicultura/métodos , Bacterias/efectos de los fármacos , Hongos/efectos de los fármacos , Metales/farmacología , Nanopartículas , Microbiología del Agua , Pruebas de Sensibilidad MicrobianaRESUMEN
With an increasing number of new chemical entities entering clinical studies, and an increasing share of the market, peptides and peptidomimetics constitute one of the most promising classes of therapeutics. The success of synthetic peptides as therapeutics relies on the lead optimization step in which the lead candidates are modified to improve drug-like properties of peptides related to potency, pharmacokinetics, solubility, and stability, among others. Peptidomimetics based on the N-terminal stretch of the first 11 amino acids of the PTH have been investigated as potential lead compounds for the treatment of osteoporosis. On the basis of a peptide reported in the literature, referred to here as the Parent Peptide (H-Aib-Val-Aib-Glu-Ile-Gln-Leu-Nle-His-Gln-Har-NH2), we conducted systematic SAR analyses to investigate the effects of altering peptide hydrophobicity on PTH receptor functional potency as measured by the cAMP (cyclic adenosine monophosphate) accumulation and ß-arrestin recruitment assays. Among hydrophobic residues, we found that the Val2 position shows the least flexibility in terms of the SAR studies, whereas the Leu7 position appeared to be most flexible. Through circular dichroism and nuclear magnetic resonance spectroscopy studies, we were able to establish that changes in hydrophobic residues significantly change the extent of peptide helicity and that the helical character correlates well with receptor agonist activity. Here, we report several novel PTH 1-11 peptidomimetics that show comparable or enhanced potency to stimulate Gs-signaling over ß-arrestin recruitment as compared with such properties of PTH 1-34 and the Parent Peptide.
Asunto(s)
Sondas Moleculares/farmacología , Oligopéptidos/farmacología , Receptor de Hormona Paratiroídea Tipo 1/química , Receptor de Hormona Paratiroídea Tipo 1/metabolismo , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Ligandos , Modelos Moleculares , Sondas Moleculares/síntesis química , Sondas Moleculares/química , Estructura Molecular , Oligopéptidos/síntesis química , Oligopéptidos/química , Receptor de Hormona Paratiroídea Tipo 1/agonistas , Relación Estructura-ActividadRESUMEN
Mn(III) tetra(meta-fluorophenyl)porphyrin-tetracyanoethenide coordination polymer (abbreviated meta-F) was synthesized and crystallographically and magnetically characterized. The compound crystallizes in the space group C2/c with four equivalent molecules in the unit cell arranged along two symmetry related nonparallel linear chain directions. Magnetic properties were studied by SQUID dc magnetization and ac susceptibility techniques and high field-high frequency electron spin resonance (HF-ESR). Glassy transition to a ferromagnetic-like state is observed at 10 K accompanied by slow magnetic relaxations. The glassiness is interpreted as due to 3D domain wall pinning. In a bias dc magnetic field the width of the relaxation time distribution decreases and the relaxations become similar to the relaxations of the single chain magnet Mn(III) tetra(ortho-fluorophenyl)porphyrin-tetracyanoethenide (abbreviated ortho-F), for which comparative HF-ESR studies were also conducted in this work. Magnetic properties of these two compounds are compared, and the nature of magnetic relaxations in meta-F is discussed.
Asunto(s)
Imanes , Metaloporfirinas/química , Compuestos Organometálicos/química , Cristalografía por Rayos X , Modelos Moleculares , Estructura Molecular , Compuestos Organometálicos/síntesis química , Polímeros/químicaRESUMEN
A polyvinylchloride (PVC) based liquid membrane ion selective electrode (ISE) for cesium has been developed. 25,27-Dihydroxycalix[4]arene-crown-6 (L1), 5,11,17,23-tetra-tert-butyl-25,27-dimethoxycalix[4]arene-crown-6 (L2) and 25,27-bis(1-octyloxy)calix[4]arene-crown-6 (L3) were investigated for their use as ionophores. The cation exchange resin DOWEX-50W was used to maintain low activity Cs+ in inner filling solution to improve the performance. The best response for cesium was observed with L3 along with optimized membrane constituents and composition. Excellent Nernstian response (56.6 mV/decade of Cs(I)) over the concentration range 10(-7) to 10(-2)M of Cs(I) was obtained with a fast response time of less than 10s. Detection limit for Cs(I) using the present ISE is 8.48×10(-8) M Cs(I). Separate solution method (SSM) was applied to ascertain the selectivity for Cs(I) over alkali, alkaline earth and transition metal ions. The response of ISE for Cs(I) was fairly constant over the pH range of 4-11. The lifetime of the electrode is 10 months which is the highest life for any membrane based Cs-ISE so far developed. The concentration of cesium ion in two simulated high level active waste streams was determined and results agreed well with those obtained independently employing AAS.
Asunto(s)
Calixarenos/química , Cesio/análisis , Compuestos Corona/química , Ionóforos/química , Contaminantes Químicos del Agua/análisis , Resinas de Intercambio de Catión , Cesio/química , Electrodos de Iones Selectos , Cloruro de Polivinilo , Resinas Sintéticas , Contaminantes Químicos del Agua/químicaRESUMEN
Lipopolysaccharides (LPS), the outer membrane of the Gram-negative bacteria, are reported to stimulate the immunity of different vertebrates including fish. However, their potency and spectrum of actions often differ among different bacteria. In this study, effect of crude LPS, derived from three species of smooth Gram-negative bacterial fish pathogens viz. Edwardsiella tarda, Escherichia coli, and Pseudomonas fluorescens, on certain innate immune parameters of Indian major carp, Labeo rohita was studied. L. rohita yearlings, when injected intraperitoneally with crude LPS extracted from these bacteria showed little variations in different innate immune parameters. Furthermore, LPS injected fish were protected against a virulent E. tarda challenge. Although, no significant difference (p>0.05) in most of the immune parameters were found with LPS of different bacteria, the E. coli LPS injected fish elucidated high resistivity during challenge study. Hence, there could be some variations in LPS with respect to the bacterial type which needs to be further explored.