RESUMEN
Er3+ and Er3+/Yb3+ melilite-based SrLaAl3O7 (SLA) phosphors were synthesized by a facile Pechine method. The differences in emission intensities of 4I13/2 â 4I15/2 transition in NIR region when excited with Ar+ and 980 nm lasers were explained in terms of energy transfer mechanisms. Temperature and power dependence of upconversion bands in the visible region centered at 528, 548 and 660 nm pertaining to 2H11/2, 4S3/2 and 4F9/2 â 4I15/2 transitions were investigated. Fluorescence intensity ratio (FIR) technique was used to explore temperature sensing behaviour of the thermally coupled levels 2H11/2/4S3/2 of Er3+ ions in the phosphors within the temperature range 14-300 K and the results were extrapolated up to 600 K. Anomalous intensity trend observed in Er3+ doped SLA phosphor was discussed using energy level structure. Cytotoxicity of phosphors has been evaluated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay in Bluegill sunfish cells (BF-2). The non-cytotoxic nature and high sensitivity of the present phosphors pay a way for their use in vitro studies and provide potential interest as a thermo graphic phosphor at the contact of biological products.
RESUMEN
In this work we demonstrate by photoluminescence studies white light emission from a monolithic InGaN/GaN single quantum well structure grown by metal organic chemical vapour deposition. As-grown and thermally annealed samples at high temperature (1000 °C, 1100 °C and 1200 °C) and high pressure (1.1 GPa) were analysed by spectroscopic techniques, and the annealing effect on the photoluminescence is deeply explored. Under laser excitation of 3.8 eV at room temperature, the as-grown structure exhibits two main emission bands: a yellow band peaked at 2.14 eV and a blue band peaked at 2.8 eV resulting in white light perception. Interestingly, the stability of the white light is preserved after annealing at the lowest temperature (1000 °C), but suppressed for higher temperatures due to a deterioration of the blue quantum well emission. Moreover, the control of the yellow/blue bands intensity ratio, responsible for the white colour coordinate temperatures, could be achieved after annealing at 1000 °C. The room temperature white emission is studied as a function of incident power density, and the correlated colour temperature values are found to be in the warm white range: 3260-4000 K.
RESUMEN
Transparent conductive tin oxide materials have been a research topic extensively studied in recent years due to the great interest for many applications. However, in most of them, the pure form is rarely used, being usually modified by the incorporation of dopants. Selecting the most appropriate technique to develop nanocrystals of doped tin oxide and understanding the influence of dopant on the optical properties are the challenges that need to be addressed when envisaging devices. To fulfill this objective, the recently developed laser assisted flow deposition (LAFD) method is explored to grow SnO2 and SnO2:Eu nanocrystals. The morphology of these nanocrystals was investigated by scanning electron microscopy and well defined prismatic nanocrystals with sizes of â¼60 nm were identified. The crystalline quality assessed by X-ray diffraction measurements and Raman spectroscopy indicates that the produced nanocrystals are monophasic and crystallize in the tetragonal rutile structure. Steady state luminescence studies provide the information on the optical active centres in the SnO2 and SnO2:Eu nanocrystals. For the undoped samples only broad emission bands were observed by pumping the samples in the ultraviolet region. The broad emission was found to be an overlap of green and red optical centres as identified by temperature and excitation intensity dependent luminescence. The latter was found to exhibit an excitonic-related behaviour and the green emission was found to be of utmost importance to discuss the intraionic luminescence in the doped samples. For the SnO2:Eu nanocrystals the luminescence is dominated by the magnetic allowed (5)D0 â (7)F1 transition with the ions in almost undistorted centrosymmetric sites. The ion luminescence integrated intensity is found to increase with increasing temperatures being well accounted for a thermal population provided by the thermal quenching of the green band.
RESUMEN
GaN/AIN structures made of GaN quantum dots (QDs) separated by AIN spacer layers, were doped with Europium by ion implantation. Rutherford Backscattering/Channelling measurements showed that Eu is incorporated mainly on near-substitutional cation sites within the superlattice region. Only slight deterioration of the crystal quality and no intermixing of the different layers are observed after implantation and annealing. After thermal annealing, photoluminescence associated with Eu3+ ions was observed. From its behaviour under different photon energy excitation and sample temperature we concluded that the Eu-related emitting centres are located inside the GaN QDs or dispersed in the GaN and AIN buffer or spacer layers. The 624 nm PL line, associated with Eu-doped GaN QDs, shows very low thermal quenching, suggesting recombination of confined carriers through rare-earth ion excitation.
RESUMEN
In this work, the coupled effect of nitrogen addition into CH4/H2 mixtures and surface temperature on diamond growth ranging from large grained polycrystalline to fine-grained nanocrystalline were investigated. Moreover a new growth parameter window for simultaneous growth of nanocrystalline diamond (NCD) and {100} textured large-grained diamond films was developed by using a high power high pressure 5 kW microwave plasma assisted chemical vapor deposition (MPCVD) reactor. Scanning electron microscope (SEM), Raman spectroscopy, and X-ray diffraction (XRD) are employed to characterize the morphology, crystalline quality and texture of the diamond samples. Our results can be grouped by two catalogs: First, deposition run without and with 0.24% N2 addition, while keeping all the other parameters constant, resulted in a high quality transparent large-grained polycrystalline diamond film and a NCD film, respectively. This result clearly evidences nitrogen induced nanocrystallinity. Then, two different substrate surface temperatures were obtained by overlapping a small silicon slice on the top centre of a large silicon wafer of 5.08 cm in diameter in only one deposition run using 0.24% N2 addition and the same set of parameters as the previous runs. From this growth run, a NCD film of growth rate around 2.3 microm/h was obtained at low temperature, while a {100} textured large-grained diamond film of much higher growth rate about 10.4 microm/h was grown at high temperature. These results not only confirm the reproducibility of NCD by N2 addition, but also indicate that distinct growth modes were involved at different substrate temperatures with 0.24% nitrogen addition, or coupled effect of nitrogen addition and temperature on the growth of CVD diamond films happened. Finite element method (FEM) analysis was employed to simulate the temperature gradient and distribution on these two samples, and based on this simulation and other simulation results in the literature, the growth mechanism is briefly discussed.