Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips.

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for optical feedback and mode selection resulting in laser self-injection locking with narrow emission linewidth. Multiple group III-nitride (III-N) based photonic integrated circuit chips with different waveguide designs including single-crystalline AlN, AlGaN, and GaN were developed and characterized. Single-frequency laser operation was demonstrated for all studied waveguide core materials. The best side-mode suppression ratio was determined to be ∼36 dB at 412 nm with a single-frequency laser emission linewidth of only 3.8 MHz at 461 nm. The performance metrics of this novel, to the best of our knowledge, type of laser suggest potential implementation in next-generation, portable quantum systems.

Nanoscale real-time detection of quantum vortices at millikelvin temperatures.

Since we still lack a theory of classical turbulence, attention has focused on the conceptually simpler turbulence in quantum fluids. Reaching a better understanding of the quantum case may provide additional insight into the classical counterpart. That said, we have hitherto lacked detectors capable of the real-time, non-invasive probing of the wide range of length scales involved in quantum turbulence. Here we demonstrate the real-time detection of quantum vortices by a nanoscale resonant beam in superfluid 4He at 10 mK. Essentially, we trap a single vortex along the length of a nanobeam and observe the transitions as a vortex is either trapped or released, detected through the shift in the beam resonant frequency. By exciting a tuning fork, we control the ambient vortex density and follow its influence on the vortex capture and release rates demonstrating that these devices are capable of probing turbulence on the micron scale.

Sources, variability and parameterizations of intra-city factors obtained from dispersion-normalized multi-time resolution factor analyses of PM2.5 in an urban environment.

Ambient fine particulate matter (PM2.5) data of similar continuously monitored species at two air monitoring sites with different characteristics within the City of Toronto were used to gauge the intra-city variations in the PM composition over a largely concurrent period spanning two years. One location was <8 m from the side of a major highway while the other was an urban background location. For the first time, multi-time resolution factor analysis was applied to dispersion-normalized concentrations to identify and quantify source contributions while reducing the influence of local meteorology. These factors were particulate sulphate (pSO4), particulate nitrate (pNO3), secondary organic aerosols (SOA), crustal matter (CrM) that were common to both sites, a hydrocarbon-like organic matter (HOM) exclusive to the urban background site, three black carbon related factors (BC, BC-HOM at the highway site, and a brown carbon rich factor (BC-BrC) at the urban background site), biomass burning organic matter (BBOM) and brake dust (BD) factors exclusive to the highway site. The PM2.5 composition was different between these two locations, over only a 10 km distance. The sum of SOA, pSO4 and pNO3 at the urban background site averaged 57% of the PM2.5 mass while the same species represented 43% of the average PM2.5 mass at the highway site. Local or site-specific factors may be of greater interest for control policy design. Thus, regression analyses with potential explanatory, site-specific variables were performed for results from the highway site. Three model approaches were explored: multiple linear regression (MLR), regression with a generalized reduced gradient (GRG) algorithm, and a generalized additive model (GAM). GAM gave the largest fraction of variance for the locally-found factors at the highway site. Heavy-duty vehicles were most important for explaining the black carbon (BC and BC-HOM) factors. Light-duty vehicles were dominant for the brake dust (BD) factor. The auxiliary modelling for the local factors showed that the traffic-related factors likely originated along the main roadways at their respective sites while the more regional factors, - pSO4, pNO3, SOA, - had sources that were both regional and local in origin and with contributions that varied seasonally. These results will be useful in understanding ambient particulate matter sources on a city scale that will support air quality management planning.

Acute myocardial injury after administration of intravenous epinephrine for allergic reaction.

Myocardial injury or infarction in the setting of anaphylaxis can be due to anaphylaxis itself, known as Kounis syndrome, or as a result of treatment with epinephrine. Myocardial ischemia caused by therapeutic doses of epinephrine in the setting of anaphylaxis is a rare event attributed to coronary artery vasospasm. A 41-year-old female with past medical history of recurrent costochondritis, chronic thrombocytopenia, and nonspecific palindromic rheumatism presented to the emergency department with perioral numbness, flushing and throat tightness after a meal containing fish and almonds. Intramuscular epinephrine was ordered but inadvertently administered intravenously, after which she developed sharp, substernal chest pain and palpitations. Electrocardiogram showed normal sinus rhythm with QT interval prolongation. Troponin peaked at 1.41 ng/mL. She was given 324 mg of aspirin in the emergency department. Transthoracic echocardiogram showed normal ejection fraction with lateral wall motion abnormality. We present a case of a patient with no significant risk factors for coronary artery disease who developed myocardial injury following inadvertent IV administration of a therapeutic dose of epinephrine for an anaphylactic-like reaction. The development of myocardial injury after epinephrine is rare, with only six reported cases in literature and just one after intravenous administration. This is the first described case of known myocardial injury without ST-T wave changes on electrocardiogram . The proposed mechanism is an alpha-1 receptor-mediated coronary vascular spasm resulting in myocardial ischemia. The aim of this case is to raise awareness of the potential for acute myocardial injury after inadvertent intravenous administration of epinephrine for anaphylaxis, even in patients with no known risk factors for coronary artery disease, as well as to demonstrate that this clinical scenario can present regardless of troponin elevation and without ST-T wave ECG changes.

Turing Instability in the Solid State: Void Lattices in Irradiated Metals.

Turing (or double-diffusive) instabilities describe pattern formation in reaction-diffusion systems, and were proposed in 1952 as a potential mechanism behind pattern formation in nature, such as leopard spots and zebra stripes. Because the mechanism requires the reacting species to have significantly different diffusion rates, only a few liquid phase chemical reaction systems exhibiting the phenomenon have been discovered. In solids the situation is markedly different, since species such as impurities or other defects typically have mobilities ∝exp(-E/k_{B}T), where E is the migration barrier and T is the temperature. This often leads to mobilities differing by several orders of magnitude. Here, we use a simple, minimal model to show that an important class of emergent patterns in solids, namely void superlattices in irradiated metals, could also be explained by the Turing mechanism. Analytical results are confirmed by phase field simulations. The model (Cahn-Hilliard equations for interstitial and vacancy concentrations, coupled by generation and annihilation terms) is generic, and the mechanism could also be responsible for the patterns and structure observed in many solid state systems.

LEGO® Block Structures as a Sub-Kelvin Thermal Insulator.

We report measurements of the thermal conductance of a structure made from commercial Acrylonitrile Butadiene Styrene (ABS) modules, known as LEGO® blocks, in the temperature range from 70 mK to 1.8 K. A power law for the sample's thermal conductivity κ = (8.7 ± 0.3) × 10-5 T 1.75±0.02 WK-1 m-1 was determined. We conclude that this ABS/void compound material provides better thermal isolation than well-known bulk insulator materials in the explored temperature range, whilst maintaining solid support. LEGO blocks represent a cheap and superlative alternative to materials such as Macor or Vespel. In our setup, <400 nW of power can heat an experimental area of 5 cm2 to over 1 K, without any significant change to the base temperature of the dilution refrigerator. This work suggests that custom-built modular materials with even better thermal performance could be readily and cheaply produced by 3D printing.

Operating Nanobeams in a Quantum Fluid.

Microelectromechanical (MEMS) and nanoelectromechanical systems (NEMS) are ideal candidates for exploring quantum fluids, since they can be manufactured reproducibly, cover the frequency range from hundreds of kilohertz up to gigahertz and usually have very low power dissipation. Their small size offers the possibility of probing the superfluid on scales comparable to, and below, the coherence length. That said, there have been hitherto no successful measurements of NEMS resonators in the liquid phases of helium. Here we report the operation of doubly-clamped aluminium nanobeams in superfluid 4He at temperatures spanning the superfluid transition. The devices are shown to be very sensitive detectors of the superfluid density and the normal fluid damping. However, a further and very important outcome of this work is the knowledge that now we have demonstrated that these devices can be successfully operated in superfluid 4He, it is straightforward to apply them in superfluid 3He which can be routinely cooled to below 100 µK. This brings us into the regime where nanomechanical devices operating at a few MHz frequencies may enter their mechanical quantum ground state.

Promoting health and reducing costs: a role for reform of self-monitoring of blood glucose provision within the National Health Service.

AIM: To determine the cost-effectiveness of all options for the self-monitoring of blood glucose funded by the National Health Service, providing guidance for disinvestment and testing the hypothesis that advanced meter features may justify higher prices. METHODS: Using data from the Health and Social Care Information Centre concerning all 8 340 700 self-monitoring of blood glucose-related prescriptions during 2013/2014, we conducted a cost-minimization analysis, considering both strip and lancet costs, including all clinically equivalent technologies for self-monitoring of blood glucose, as determined by the ability to meet ISO-15197:2013 guidelines for meter accuracy. RESULTS: A total of 56 glucose monitor, test strip and lancet combinations were identified, of which 38 met the required accuracy standards. Of these, the mean (range) net ingredient costs for test strips and lancets were £0.27 (£0.14-£0.32) and £0.04 (£0.02-£0.05), respectively, resulting in a weighted average of £0.28 (£0.18-£0.37) per test. Systems providing four or more advanced features were priced equal to those providing just one feature. A total of £12 m was invested in providing 42 million self-monitoring of blood glucose tests with systems that fail to meet acceptable accuracy standards, and efficiency savings of £23.2 m per annum are achievable if the National Health Service were to disinvest from technologies providing lesser functionality than available alternatives, but at a much higher price. CONCLUSION: The study uncovered considerable variation in the price paid by the National Health Service for self-monitoring of blood glucose, which could not be explained by the availability of advanced meter features. A standardized approach to self-monitoring of blood glucose prescribing could achieve significant efficiency savings for the National Health Service, whilst increasing overall utilisation and improving safety for those currently using systems that fail to meet acceptable standards for measurement accuracy.