Floating treatment wetlands with Canna indica for the removal of Cr(III) and Cr(VI) from water: A comprehensive study.

The efficiency in Cr (III) and Cr (VI) removal by Floating Treatment Wetlands (FTWs) vegetated with Canna indica, metal accumulation in sediment and plants were determined. Plant tolerance and its morphological response to metal were studied. Treatments were 5 and 10 mg L-1 of Cr(III) (5Cr(III) and 10Cr(III), respectively), and 5 and 10 mg L-1 of Cr(VI) (5Cr(VI) and 10Cr(VI), respectively), with and without FTWs, and a biological control (BC: with FTW without Cr addition). After 35 days, Total-Cr removals in treatments with FTW were 99.6 %, 96.9 %, 96.9 % and 81.7 % in 5Cr(III), 10Cr(III), 5Cr(VI) and 10Cr(VI), respectively. In Cr (III) treatments, the sediment from the reactors without FTW accumulated significantly more metal than the sediments with FTW, while the opposite occurred in the Cr(VI) treatments. Chromium in sediment was accumulated mainly bound to organic matter in all treatments (38-64 %). Roots of C. indica were the main Cr accumulator organ in all treatments (76-88 %). In 10Cr(VI) treatment, Cr was translocated to aerial parts resulting in a decrease in plant biomass and Chlorophyll a concentration. C. indica modified its internal and external root morphology as a mechanism to tolerate Cr toxicity, without affecting removal efficiencies. FTWs vegetated with C. indica were efficient in the remediation of water bodies contaminated with Cr. In addition, these systems have an aesthetic value because they use an ornamental species.

Cr(III) and Cr(VI) removal in floating treatment wetlands (FTWs) using Typha domingensis.

Floating treatment wetlands (FTWs) are a cost-effective ecological engineering tool for the restoration of polluted water bodies. The aims of this work were to evaluate the removal of Cr(III) and Cr(VI) by FTWs using Typha domingensis, and to assess Cr accumulation and distribution in plant tissues and sediment. Treatments were 5 and 10 mg L-1 of Cr(III), and 5 and 10 mg L-1 of Cr(VI), with and without FTWs, and biological control (BC) with FTW without Cr addition. Both Cr species were efficiently removed from water in all treatments (Cr removal > 80%). Cr concentration in sediments of treatment without FTWs was significantly higher than in sediments of treatments with FTWs, indicating that T. domingensis was directly involved in Cr removal. In sediment, Cr was mainly bound to the organic matter in all treatments with a low risk of future release under FTW conditions. T. domingensis demonstrated tolerance to both Cr species at 5 and 10 mg L-1 with Cr accumulated mainly in the roots in all treatments. The use of FTWs planted with T. domingensis is a suitable tool to remediate water bodies contaminated with Cr.

This study evaluates the removal efficiency of Cr(III) and Cr(V) in Floating Treatment Wetlands planted with Typha domingensis in greenhouse experiments. Cr accumulation and distribution in plant tissues and different sediment fractions were also assessed.

Cr, Ni, and Zn removal from landfill leachate using vertical flow wetlands planted with Typha domingensis and Canna indica.

Chromium (Cr), Nickel (Ni), and zinc (Zn) removal from landfill leachate using mesocosm-scale vertical flow wetlands, the effect of recirculation, and the ability of macrophytes to retain metals were evaluated. Wetlands were filled with coarse sand and light expanded clay aggregates and planted with Typha domingensis or Canna indica. Wetlands were operated using intermittent loading, with and without recirculation. Raw leachate was diluted and spiked with metals to reach the following concentrations: 0.2 mg L-1 Cr , 0.2 mg L-1 Ni, and0.2 mg L-1 Zn and 1.0 mg L-1 Cr, 1.0 mg L-1 Ni, and 1.0 mg L-1 Zn. Wetlands planted with T. domingensis presented higher metal removal than those planted with C. indica. Recirculation enhanced metal removal efficiencies significantly, being for T. domingensis/C. indica: 60/54, 49/47, 61/47% for Cr, Ni, and Zn at 0.2 mg L-1, and 80/71, 76/62, 73/59% for Cr, Ni, and Zn at 1.0 mg L-1, respectively. Metals were efficiently retained by macrophytes. Plant biomass and metal concentrations in roots were significantly higher than in shoots. Scanning electron microscopy and X-ray microanalysis showed that metals were absorbed by internal root tissues. A hybrid wetland planted with T. domingensis may be implemented to improve not only metal but also chemical oxygen demand and total nitrogen removals.

Selection of macrophytes and substrates to be used in horizontal subsurface flow wetlands for the treatment of a cheese factory wastewater.

The aims of this study were to select the most suitable macrophyte species and substrate to be used in horizontal subsurface flow (HSSF) wetlands for the treatment of a local cheese factory wastewater, and to quantify the influence of plant species and substrates by applying of a simple first-order kinetic model. Microcosms-scale HSSF wetlands were planted with Canna glauca or Typha domingensis. LECA and river stones were used as substrates. Both studied macrophytes showed a high tolerance to the treated wastewater. HSSF wetlands were efficient for the treatment of diluted cheese production wastewater. COD, TP, NH4+-N and TN showed high removal efficiencies in all the HSSF wetlands. HSSF wetlands planted with C. glauca showed the best performance for removal of NH4+-N. The highest SRP removal was obtained in HSSF wetlands planted C. glauca with LECA as substrate. A simple first-order kinetics model was applied. The fitted parameters of the modified first-order model k-C* allowed to demonstrate the effect of the plants in the treatment of the effluent. HSSF wetlands planted with C. glauca using river stones were the systems that showed the fastest TIN removal. According to the obtained results, it is proposed to use C. glauca and river stones as substrate in a HSSF wetland for the treatment of this wastewater. The present study provides useful data to design a wetland at a larger scale.

Coated mesh photocatalytic reactor for air treatment applications: comparative study of support materials.

An experimental comparative study of different meshes as support materials for photocatalytic applications in gas phase is presented. The photocatalytic oxidation of dichloromethane in air was addressed employing different coated meshes in a laboratory-scale, continuous reactor. Two fiberglass meshes and a stainless steel mesh were studied regarding the catalyst load, adherence, and catalytic activity. Titanium dioxide photocatalyst was immobilized on the meshes by dip-coating cycles. Results indicate the feasibility of the dichloromethane elimination in the three cases. When the number of coating cycles was doubled, the achieved conversion levels were increased twofold for stainless steel and threefold for the fiberglass meshes. One of the fiberglass meshes (FG2) showed the highest reactivity per mass of catalyst and per catalytic surface area.