RESUMEN
OBJECTIVES: To determine the most distinctive quantitative radiomorphometric parameter(s) for the detection of MRONJ-affected bone changes in panoramic radiography (PR) and cone-beam CT (CBCT). METHODS: PR and sagittal CBCT slices of 24 MRONJ patients and 22 healthy controls were used for the measurements of mandibular cortical thickness (MCT), fractal dimension (FD), lacunarity, mean gray value (MGV), bone area fraction (BA/TA), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular number (Tb.N). MCT was measured in the mental foramen region. While FD and lacunarity were measured on mandibular trabecular and cortical regions-of-interest (ROIs), the remaining parameters were measured on trabecular ROIs. The independent samples t-test was used to compare the measurements between the MRONJ and control groups for both imaging modalities (P = .05). RESULTS: MCT was the only parameter that differentiated MRONJ-affected bone in both PR and CBCT (P < .05). None of the remaining parameters revealed any difference for MRONJ-affected bone in CBCT (P > .05). FD, lacunarity, MGV, BA/TA, and Tb.Sp could distinguish MRONJ-affected trabecular bone in PR (P < .05). The correspondent ROI for both imaging methods that was reliable for detecting MRONJ-affected bone was the trabecular bone distal to the mental foramen above the inferior alveolar canal (ROI-3). CONCLUSIONS: MCT is a reliable parameter for the discrimination of MRONJ-affected bone in both PR and CBCT images. PR may be used to detect MRONJ-affected trabecular bone using FD, lacunarity, MGV, BA/TA, and Tb.Sp measurements as well.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Radiografía Panorámica , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Femenino , Masculino , Persona de Mediana Edad , Estudios de Casos y Controles , Anciano , Osteonecrosis de los Maxilares Asociada a Difosfonatos/diagnóstico por imagen , Adulto , Mandíbula/diagnóstico por imagen , FractalesRESUMEN
PURPOSE: To evaluate the accuracy of available bone width, height, and length measurements on pre-planned implant sites using CBCT images scanned at different angulations of the mandible. MATERIALS AND METHODS: Standard cylindrical holes were prepared on six dry human mandibles and filled with warm gutta-percha to create spherical markers for measurements of available bone width, height, and length. Mandibles were first scanned with a CBCT device in an ideal position with the occlusal plane parallel to the horizontal plane. Then, images of the mandibles were obtained in rotation, tilt, flexion, and extension positions using 5- and 10-degree angulations. Measurements were done on a total of 54 images. Original dimensions of the available bone for planned implant sites were measured with a digital caliper on dry mandibles as the gold standard. The absolute values of the differences between each measurement and the gold standard were obtained for measurement errors. Repeated-measures analysis of variance and Dunnett's multiple comparisons test were used for comparisons (P = .05). Intraobserver and interobserver agreement was calculated using intraclass correlation coefficient (ICC). RESULTS: ICC was excellent for both intraobserver and interobserver reproducibility. No significant difference was found between length and height measurements in ideal position and in rotation, tilt, flexion, and extension movements of mandibles at two different angulations (P > .05). Width measurements revealed a significant difference among ideal measurements and measurements at 10-degree flexion, 10-degree extension, 10-degree rotation, and 10-degree tilted mandibular positions (P < .05). CONCLUSION: The position of the occlusal plane with respect to the floor during the CBCT scan may have a clinically significant effect on dental implant site dimensions.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Tomografía Computarizada de Haz Cónico Espiral , Humanos , Mandíbula/diagnóstico por imagen , Reproducibilidad de los ResultadosRESUMEN
BACKGROUND: Anterior mandibular (interforaminal) region is important in implant applications as it serves a basis for neurovascular bedding and holds the prosthesis for patients. Treatment planning for dental implant patients is often complicated by the unknown extent of the anterior loop of the neurovascular bundle. Anatomical structures including mandibular incisive canal (MIC) and lingual foramen (LF) should also be examined as part of the detailed analysis for their neurovascular structures. This study aimed to detect the positions of LF and MIC as well as the prolongation of interforaminal region in Anatolian population to supply the reference data of the surgical safe zone in chin for the clinicians. MATERIALS AND METHODS: Mandibles of 70 adult specimens (35 edentulous + 35 dentate) were retrieved from the Department of Anatomy, Ege University. Images of the dry mandibles were obtained using a cone beam computed tomography unit applying a standardized exposure protocol. Afterwards, mandibles were sawn into vertical sections according to the respective tomographic cross-sections. Images were evaluated for the absence/presence of the MIC, its dimensions and antero-posterior length for both edentulous and dentate groups. In addition; the presence, number, location, labial canal and LF diameter and height of the LF were determined for both groups. RESULTS: The MIC was observed in 80 and 68.6% of the dentate and edentulous groups, consecutively (p > 0.05). The MIC continued towards the incisor region in a slightly downward direction. The LF was observed in all dentate mandibles (100%), while it was present in 94.3% of the edentulous mandibles (p > 0.05). For the dentate group, 62.9% of the specimens had two foramens and 20% had three foramens in the mandibular midline. Mean length of the MIC in dentate groups and edentulous groups was measured as 2.55 ± 0.809 and 3.08 ± 1.745 mm, respectively. Well-defined MIC mean diameter in dentate groups and edentulous groups were measured as 2.44 ± 0.702 and 2.35 ± 0.652 mm, respectively. Significant difference was found between dentate and edentulous group in most of the parameters except for the LF and the diameter of the MIC (p > 0.05). The correlation between observers' measurements ranged between 0.742 and 0.993 for all anatomical landmarks and mandible groups. CONCLUSION: The MIC and LF are associated with neurovascular bundle variations in number, location and size. Therefore, clinicians should determine each of these anatomical structures on a case-by-case basis to recognize their presence and to take measures for the possible implications of various treatment options. These guidelines included leaving a 2 mm safety zone between an implant and the coronal aspect of the neurovascular bundle. To avoid neurovascular injury during surgery in the interforaminal area, guidelines were developed with respect to validating the presence of an anterior loop of the neurovascular bundle.
Asunto(s)
Puntos Anatómicos de Referencia , Tomografía Computarizada de Haz Cónico , Arcada Edéntula/diagnóstico por imagen , Mandíbula/anatomía & histología , Adulto , Cadáver , Implantación Dental Endoósea , Humanos , Arcada Edéntula/cirugía , Mandíbula/diagnóstico por imagen , Mandíbula/cirugíaRESUMEN
OBJECTIVES: The aim of this study was to investigate oral and general health-related quality of life (QoL) in patients with familial Mediterranean fever (FMF) disease. METHODS: In this cross-sectional study, 45 patients with FMF, 50 age- and sex-matched healthy controls (HC), and 50 patients with Behçet's disease (BD) as the disease control group were included. FMF disease activity was evaluated by using the FMF-severity score, as well as with erythrocyte sedimentation rate (ESR), and serum C-reactive protein and fibrinogen levels. Oral health-related QoL and general QoL were evaluated using oral health impact profile-14 (OHIP-14) and Medical Outcomes Short-Form Health Survey Questionnaire 36 (SF-36), respectively. RESULTS: Only the numbers of extracted teeth (4.13±4.72 vs. 1.55±3.6) and filled teeth (2.33±3.19 vs. 0.66±1.46) were significantly higher in FMF group compared to HC group (p=0.005 and p=0.013, respectively). OHIP-14 score was significantly higher in FMF and BD groups compared to HC group. In FMF patients, OHIP-14 score was positively correlated with the number of extracted teeth (r=0.38, p=0.010), while the number of carious teeth was positively correlated with ESR (r=0.43, p=0.003). When FMF patients were sub-classified according to disease severity, no significant difference was observed with respect to oral health status. CONCLUSIONS: In patients with FMF, some of the parameters of oral health status were found to be worse compared to HC group. Tooth loss appears to be to be a critical factor contributing to impaired oral QoL. In general, oral health status in FMF patients is better than in BD patients.
Asunto(s)
Fiebre Mediterránea Familiar/diagnóstico , Estado de Salud , Salud Bucal , Calidad de Vida , Adulto , Análisis de Varianza , Biomarcadores/sangre , Sedimentación Sanguínea , Proteína C-Reactiva/análisis , Estudios Transversales , Caries Dental/etiología , Caries Dental/psicología , Caries Dental/terapia , Restauración Dental Permanente , Fiebre Mediterránea Familiar/sangre , Fiebre Mediterránea Familiar/complicaciones , Fiebre Mediterránea Familiar/psicología , Femenino , Fibrinógeno/análisis , Humanos , Masculino , Persona de Mediana Edad , Encuestas y Cuestionarios , Extracción DentalRESUMEN
OBJECTIVE: The objective of this study is to compare the diagnostic accuracy of visual inspection (VI) and storage phosphor plate (SPP) radiography for the detection of artificial demineralization bordering different laminate veneers. MATERIALS AND METHODS: Twenty human maxillary canine teeth were prepared. All-ceramic (A) and hybrid ceramic (H) laminate veneers were fabricated and luted. Veneered teeth were covered except for a circular window on the proximal surface bordering restorations. Teeth were kept in acetic acid buffer to create demineralization and imaged with a SPP system. Ten observers evaluated all teeth first visually then with SPP images for the presence/absence of demineralization. Teeth were examined using scanning electron microscopy (SEM) as well. The accuracy was expressed as the area under the ROC curves (A(z)). Pair-wise comparisons were performed using two-way ANOVA and post hoc t test (p = 0.05). Fleiss kappa (κ) was used for agreement. RESULTS: SPP radiography was better than the VI for both veneers (p = 0.004). The A(z)s of two veneers were different for both VI (p < 0.005) and SPP (p < 0.005). SEM evaluation revealed lesions confined to enamel. κ was fair for H, and fair to moderate for A. Agreement was higher for the radiographic evaluation for both veneers. CONCLUSION: Enamel demineralizations bordering hybrid and ceramic laminate veneers can be detected better with SPP radiography than VI and detectability was better for all-ceramic veneers than the hybrid ceramic ones. CLINICAL RELEVANCE: Early detection of enamel demineralizations bordering laminate veneers would result in time-saving and less-invasive treatment methods; therefore, SPP radiography may be recommended in clinically suspicious cases since it provides better diagnostic accuracy.
Asunto(s)
Coronas con Frente Estético , Desmineralización Dental/diagnóstico , Ácido Acético/efectos adversos , Grabado Ácido Dental/métodos , Adulto , Óxido de Aluminio/química , Área Bajo la Curva , Cementación/métodos , Resinas Compuestas/química , Diente Canino/diagnóstico por imagen , Diente Canino/patología , Esmalte Dental/diagnóstico por imagen , Esmalte Dental/patología , Grabado Dental/métodos , Porcelana Dental/química , Diseño de Prótesis Dental , Recubrimientos Dentinarios/química , Humanos , Ácido Fluorhídrico/química , Metacrilatos/química , Microscopía Electrónica de Rastreo , Persona de Mediana Edad , Variaciones Dependientes del Observador , Examen Físico/estadística & datos numéricos , Poliuretanos/química , Curva ROC , Radiografía , Cementos de Resina/química , Propiedades de Superficie , Desmineralización Dental/diagnóstico por imagen , Pantallas Intensificadoras de Rayos X/estadística & datos numéricosRESUMEN
PURPOSE: To evaluate the combination of fractal dimension (FD), lacunarity, and Feret diameter (FeD) to quantitatively characterize structural changes of mandibular alveolar bone around dental implants during initial healing. MATERIALS AND METHODS: Three standard-sized regions of interest (ROIs) (mesial and distal crest and apical area) around implants and three ROIs of the same size in the alveolar bone on the contralateral side were analyzed on digital panoramic images. FD was calculated using the box-counting method, and lacunarity was calculated using the FracLac plugin of Image J software. FeD was measured in the same ROIs. Comparisons of the groups were done with the Dunnett test. RESULTS: Forty-two implants in the posterior mandibles of 21 patients were used for FD measurements. A total of 189 ROIs was segmented into binary images. Mean FD values for mesial, distal, and apical ROIs around implants were 1.26, 1.36, and 1.4, respectively. The mean FD of alveolar bone around premolars/molars was 1.39 for all ROIs. The mean FeD for mesial, distal, and apical ROIs around implants was 7.63, 7.86, and 8.02, respectively, whereas it ranged between 7.88 and 8.13 for premolar teeth. Mean lacunarity values for mesial, distal, and apical ROIs around implants were 0.53, 0.51, and 0.48, respectively. Lacunarity values for ROIs around premolars ranged between 0.45 and 0.50. No significant differences were observed in FD, FeD, or lacunarity measurements between ROIs around implants and around teeth. CONCLUSIONS: The satisfactory healing of bone following implant placement may be monitored by calculating FD, lacunarity, and FeD using digital panoramic images. Although preliminary, these values may alert the practitioner to any implants with loss of stability.
Asunto(s)
Implantación Dental Endoósea , Fractales , Mandíbula/fisiología , Oseointegración/fisiología , Cicatrización de Heridas/fisiología , Adulto , Diente Premolar , Densidad Ósea , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Masculino , Mandíbula/anatomía & histología , Mandíbula/diagnóstico por imagen , Diente Molar , Falla de Prótesis , Radiografía Panorámica/métodos , Estadística como AsuntoRESUMEN
OBJECTIVE: The aim of this study was to compare the diagnostic accuracy of F-speed film and storage phosphor plate (SPP) exposed with different exposure times for the detection of artificial enamel subsurface demineralization. STUDY DESIGN: Standard enamel windows of extracted premolars were exposed to a demineralizing solution. All teeth were radiographed before and after acid application with F-speed films and SPPs. Films were exposed for 0.25 seconds and SPPs were exposed using 4 exposure times. Receiver operating characteristic analysis was used for diagnostic accuracy (A(z)). RESULTS: Significant differences were obtained among A(z)s of 0.08- versus 0.12-seconds and 0.10- versus 0.12-second exposed SPPs (P < .05). A(z)s of films were higher than the SPPs exposed with 0.08, 0.10, and 0.12 seconds (P < .05). No difference was found between the A(z)s of the 2 systems when SPPs were exposed for 0.16 seconds (P > .05). CONCLUSIONS: Diagnostic accuracy of films and SPPs was not impaired when exposure time was 36% reduced for the latter; however, diagnosis was impaired when reduced 52%.
Asunto(s)
Esmalte Dental , Minerales/química , Radiografía Dental Digital/instrumentación , Humanos , Curva ROC , Sensibilidad y EspecificidadRESUMEN
OBJECTIVES: To produce a copper (Cu) stepwedge with aluminum (Al) equivalent mean gray values (MGV). MATERIAL AND METHODS: The thicknesses of Cu steps that were equivalent to those of the Al were formulated using the X-ray attenuation properties of the materials. The Al and fabricated Cu stepwedges were radiographed, but the MGVs of the Cu stepwedge were mismatching to those of the Al. Using a mathematical function to adjust the pixel MGV of Cu stepwedge to those of the Al, new Cu stepwedges were created. In vitro iterations were performed until best approximation to Al was reached. RESULTS: The MGV of the Cu stepwedges fabricated by formularization were different than those of Al (p=0.001). Iteration method led to MGV similar to those of the Al stepwedge (p=0.207). CONCLUSIONS: Construction of a Cu stepwedge according to the basic rules of radiophysic failed to result in a stepwedge with similar radiodensity values to those of Al stepwedge. Further studies may use the formularization method only for prototype Cu wedge production, but consecutive iterations shall be compassed to obtain the best approximation to Al MGV.
Asunto(s)
Absorciometría de Fotón/instrumentación , Aluminio/química , Cobre/química , Radiografía Panorámica/instrumentación , Algoritmos , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Fenómenos Ópticos , Dosis de Radiación , Radiografía Panorámica/normas , Estándares de Referencia , Espectrofotometría Atómica , Propiedades de Superficie , Película para Rayos X/normasRESUMEN
OBJECTIVE: This study investigated the radiopacity of six commercially available flowable composites by using a digital image analysis method to determine the mean gray values of the materials. METHODS: The flowable resin composites evaluated in this study were Clearfil Majesty Flow, Estelite Flow Q, Tetric N Flow, Esthet X Flow, Filtek Supreme XT Flow and Gradia Direct LoFlo. Ten sample discs (6 x 1 mm) for each group were prepared and 1-mm thick slices were obtained from freshly-extracted teeth for the control group. The mean gray values (MGVs) of each specimen and aluminum (Al) stepwedge were measured by using the histogram function of a computer graphics program. Analysis of variance (ANOVA) was used to investigate the significance of the differences among the groups. For pairwise comparisons, the Tukey test was applied (alpha=0.05). RESULTS: The radiopacity values of Gradia Direct LoFlo, dentin and Estelite Flow Q were close to that of 1 mm Al. Tetric N Flow and Cl Majesty Flow were more radiopaque than enamel, whereas Filtek Supreme XT Flow had a similar radiopacity to enamel. CONCLUSION: The radiopacity of flowable composites varies considerably, and care must be taken when selecting an appropriate material to enable secondary caries detection under posterior composite restorations.
Asunto(s)
Resinas Compuestas/química , Medios de Contraste/química , Materiales Dentales/química , Absorciometría de Fotón , Gráficos por Computador , Esmalte Dental/diagnóstico por imagen , Dentina/diagnóstico por imagen , Humanos , Procesamiento de Imagen Asistido por Computador , Ensayo de Materiales , ViscosidadRESUMEN
OBJECTIVES: To produce a copper (Cu) stepwedge with aluminum (Al) equivalent mean gray values (MGV). MATERIAL AND METHODS: The thicknesses of Cu steps that were equivalent to those of the Al were formulated using the X-ray attenuation properties of the materials. The Al and fabricated Cu stepwedges were radiographed, but the MGVs of the Cu stepwedge were mismatching to those of the Al. Using a mathematical function to adjust the pixel MGV of Cu stepwedge to those of the Al, new Cu stepwedges were created. In vitro iterations were performed until best approximation to Al was reached. RESULTS: The MGV of the Cu stepwedges fabricated by formularization were different than those of Al (p=0.001). Iteration method led to MGV similar to those of the Al stepwedge (p=0.207). CONCLUSIONS: Construction of a Cu stepwedge according to the basic rules of radiophysic failed to result in a stepwedge with similar radiodensity values to those of Al stepwedge. Further studies may use the formularization method only for prototype Cu wedge production, but consecutive iterations shall be compassed to obtain the best approximation to Al MGV.