Anti-tumor withanolides as signal transducers and activators of transcription 3 (STAT3)-inhibition from Withania obtusifolia.

The Solanaceae family and the Withania genus specifically are rich sources of medicinal plants. Liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS/MS) revealed a predominance of withanolides from an organic extract of Withania obtusifolia. A constructed molecular network uncovered the presence of potentially novel withanolides. A series of withanolides were then isolated and structurally characterized from the extract including two new withanolides (withafolia A and withafolia B) and seven previously reported metabolites. Of the isolated compounds, cytotoxicity of withanolide J, physaperuvin G, and a commercial STAT3 inhibitor (S3I-201) were assessed against a human leukemia HL-60 cell line resulting in IC50 values of 26, 29, and 120 µM, respectively. In silico molecular docking simulations indicate that withanolide J and physaperuvin G can bind as an inhibitor in the active site of STAT3 with docking scores comparable to the selective STAT3 inhibitor, S3I-201.

Cancer Cell Targeting Via Selective Transferrin Receptor Labeling Using Protein-Derived Carbon Dots.

Carbon dot (CD) nanoparticles offer tremendous advantages as fluorescent probes in bioimaging and biosensing; however, they lack specific affinity for biomolecules, limiting their practical applications in selective targeting. Nanoparticles with intrinsic affinity for a target have applications in imaging, cytometry, therapeutics, etc. Toward that end, we report the transferrin receptor (CD71) targeting CDs, synthesized for the first time. The formation of these particles is truly groundbreaking, as direct tuning of nanoparticle affinity was achieved by simple and careful precursor selection of a protein, which has the targeting characteristic of interest. We hypothesized that the retention of the original protein's peptides on the nanoparticle surface provides the CDs with some of the function of the precursor protein, enabling selective binding to the protein's receptor. This was confirmed with FTIR (Fourier transform infrared) data and subsequent affinity-based cell assays. These transferrin (Tf)-derived CDs have been shown to possess an affinity for CD71, a cancer biomarker that is ubiquitously expressed in nearly every cancer cell line due to its central role mediating the uptake of cellular iron. The CDs were tested using the human leukemia cell line HL60 and demonstrated the selective targeting of CD71 and specific triggering of transferrin-mediated endocytosis via clathrin-coated pits. The particle characterization results reflect a carbon-based nanoparticle with bright violet fluorescence and 7.9% quantum yield in aqueous solution. These unpresented CDs proved to retain the functional properties of the precursor protein. Indicating that this process can be repeated for other disease biomarkers for applications ranging from biosensing and diagnostic bioimaging to targeted therapeutics.

Combined CD25, CD64, and CD69 Biomarker in 3D-Printed Multizone Millifluidic Device for Sepsis Detection in Clinical Samples.

Sepsis is a serious medical condition that arises from a runaway response to an infection, which triggers the immune system to release chemicals into the bloodstream. This immune response can result in widespread inflammation throughout the body, which may cause harm to vital organs and, in more severe cases, lead to organ failure and death. Timely and accurate diagnosis of sepsis remains a challenge in analytical diagnostics. In this work, we have developed and validated a sepsis detection device, utilizing 3D printing technology, which incorporates multiple affinity separation zones. Our device requires minimal operator intervention and utilizes CD64, CD69, and CD25 as the biomarker targets for detecting sepsis in liquid biopsies. We assessed the effectiveness of our 3D-printed multizone cell separation device by testing it on clinical samples obtained from both septic patients (n = 35) and healthy volunteers (n = 8) and validated its performance accordingly. Unlike previous devices using poly(dimethyl siloxane), the 3D-printed device had reduced nonspecific binding for anti-CD25 capture, allowing this biomarker to be assayed for the first time in cell separations. Our results showed a statistically significant difference in cell capture between septic and healthy samples (with p values of 0.0001 for CD64, CD69, and CD25), suggesting that 3D-printed multizone cell capture is a reliable method for distinguishing sepsis. A receiver operator characteristic (ROC) analysis was performed to determine the accuracy of the captured cell counts for each antigen in detecting sepsis. The ROC area under the curve (AUC) values for on-chip detection of CD64+, CD69+, and CD25+ leukocytes were 0.96, 0.92, and 0.88, respectively, indicating our diagnostic test matches clinical outcomes. When combined for sepsis diagnosis, the AUC value for CD64, CD69, and CD25 was 0.99, indicating an improved diagnostic performance due to the use of multiple biomarkers.

Isolation of Cancer Cells from Liquid Biopsies Using 3D-Printed Affinity Devices.

Liquid biopsies are examination procedures for deciding the grouping of malignant growth cells tracked down in samples of blood and other body fluids. Liquid biopsies are likewise significantly less intrusive than tissue biopsies as they just require small amount of blood or body fluids from the patient. With the utilization of microfluidics, cancer cells can be isolated from the fluid biopsy and achieve early diagnosis. 3D printing is turning out to be progressively well known for microfluidic devices creation. 3D printing has shown multiple advantages compared to traditional microfluidic devices production, including effortless large-scale manufacturing of precise copies, the fuse of new materials, and execution of additional complicated or drawn-out plans that are hard to execute in conventional microfluidic devices. Combining 3D printing with microfluidics makes for a relatively inexpensive analysis of liquid biopsies with a chip that can be more advantageous to use over traditional microfluidic chips. In this chapter, a method for affinity-based separation of cancer cells in a liquid biopsy using a 3D microfluidic chip will be discussed, along with the rationale behind the method.

Novel synthesis of fibronectin derived photoluminescent carbon dots for bioimaging applications.

Fibronectin (FN) derived from human plasma has been used for the first time as the carbon precursor in the top-down, microwave-assisted hydrothermal synthesis of nitrogen doped carbon dots (CDs). FN is a large glycoprotein primarily known for its roles in cell adhesion and cell growth. Due to these properties FN can be over expressed in the extracellular matrix (ECM) of some cancers allowing FN to be used as an indicator for the detection of cancerous cells over non-cancerous cells. These FN derived CDs display violet photoluminescence with UV excitation and appear to possess similar functional groups on their surface to their carbon precursor (-COOH and -NH2). This is believed to be due to the self-passivation of the CDs' nitrogen-containing surface functional groups during the heating process. These CDs were then used to stain MCF-7 and MDA-231 breast cancer cells and were observed to interact primarily with the cell membrane rather than intercalating into the cell like the many other types of CDs. This led to the hypothesis that the CDs are selectively binding to the FN overexpressed within the cancer cells' ECM via amide linkages. This is in agreement with the EDX and FTIR spectra of the FN CDs which indicate the presence of -COOH and nitrogen containing surface groups like -NH3. The inherent selectivity of the CDs combined with their ability to photoluminesce enables their use as a fluorophore for bioimaging applications.

Synthesis and Characterization of Dye-Doped Au@SiO2 Core-Shell Nanoparticles for Super-Resolution Fluorescence Microscopy.

Dye-doped nanoparticles have been investigated as bright, fluorescent probes for localization-based super-resolution microscopy. Nanoparticle size is important in super-resolution microscopy to get an accurate size of the object of interest from image analysis. Due to their self-blinking behavior and metal-enhanced fluorescence (MEF), Ag@SiO2 and Au@Ag@SiO2 nanoparticles have shown promise as probes for localization-based super-resolution microscopy. Here, several noble metal-based dye-doped core-shell nanoparticles have been investigated as self-blinking nanomaterial probes. It was observed that both the gold- and silver-plated nanoparticle cores exhibit weak luminescence under certain conditions due to the surface plasmon resonance bands produced by each metal, and the gold cores exhibit blinking behavior which enhances the blinking and fluorescence of the dye-doped nanoparticle. However, the silver-plated nanoparticle cores, while weakly luminescent, did not exhibit any blinking; the dye-doped nanoparticle exhibited the same behavior as the core fluorescent, but did not blink. Because of the blinking behavior, stochastic optical reconstruction microscopy (STORM) super-resolution analysis was able to be performed with performed on the gold core nanoparticles. A preliminary study on the use of these nanoparticles for localization-based super-resolution showed that these nanoparticles are suitable for use in STORM super resolution. Resolution enhancement was two times better than the diffraction limited images, with core sizes reduced to 15 nm using the hybrid Au-Ag cores.

High-recovery sorting of cancer cells from whole blood via periodic-focusing inertial microchip.

Inertial microfluidic devices continue to show promise for label-free separation of cells from liquid biopsies and other biological samples. Serpentine-channel microfluidic devices capitalizing on inertial forces such as Dean flow have been demonstrated for cell separation, but are limited in performance due to the magnitude of the inertial lift and drag force gradients across the separation channel. We have developed a new flow design that uses periodic channel contractions to enhance the magnitude of the force gradient. Separation recover was 97% with the final sorter output consisting of 78% target cells. Separation efficiency was 87% for whole blood, which could be increased to 97% if the sample was diluted prior to sorting. The enrichment of cancer cells was over 1000-fold, and sorted cancer cells maintained a viability of 93.8% for 96 hours after sorting. In the analysis of blood plasma, breast cancer cells from a clinical patient were enriched 20×. The incorporation of periodic channel contractions in a Dean flow circuit resulted in an increase in Dean flow gradient according to simulation, resulting in sorting of small-diameter cancer cells in blood samples.

Protein-, polymer-, and silica-based luminescent nanomaterial probes for super resolution microscopy: a review.

Super resolution microscopy was developed to overcome the Abbe diffraction limit, which effects conventional optical microscopy, in order to study the smaller components of biological systems. In recent years nanomaterials have been explored as luminescent probes for super resolution microscopy, as many have advantages over traditional fluorescent dye molecules. This review will summarize several different types of nanomaterial probes, covering quantum dots, carbon dots, and dye doped nanoparticles. For the purposes of this review the term "nanoparticle" will be limited to polymer-based, protein-based, and silica-based nanoparticles, including core-shell structured nanoparticles. Luminescent nanomaterials have shown promise as super-resolution probes, and continued research in this area will yield new advances in both materials science and biochemical microscopy at the nanometer scale.

A Review of Fluorescent Carbon Dots, Their Synthesis, Physical and Chemical Characteristics, and Applications.

Carbon dots (CDs) are a particularly useful type of fluorescent nanoparticle that demonstrate biocompatibility, resistance to photobleaching, as well as diversity in composition and characteristics amongst the different types available. There are two main morphologies of CDs: Disk-shaped with 1-3 stacked sheets of aromatic carbon rings and quasi-spherical with a core-shell arrangement having crystalline and amorphous properties. They can be synthesized from various potentially environmentally friendly methods including hydrothermal carbonization, microwaving, pyrolysis or combustion, and are then purified via one or more methods. CDs can have either excitation wavelength-dependent or -independent emission with each having their own benefits in microscopic fluorescent imaging. Some CDs have an affinity for a particular cell type, organelle or chemical. This property allows the CDs to be used as sensors in a biological environment and can even provide quantitative information if the quenching or intensity of their fluorescence is dependent on the concentration of the analyte. In addition to fluorescent imaging, CDs can also be used for other applications including drug delivery, quality control, photodynamic therapy, and photocatalysis.

Microfluidic Chips for Sepsis Diagnosis.

This chapter discusses two microfluidic-based approaches for early sepsis detection that achieve a higher accuracy than traditional blood culture analysis. Patient blood samples were included in this work to validate the performance of our chips in diagnosing sepsis. The single-parameter chip demonstrated the increased accuracy if using CD64 as a biomarker for sepsis detection compared with C-reactive protein (CRP) and procalcitonin (PCT) when applied alone. In addition, a multiparameter chip measuring a combined panel of CD25, CD64, and CD69, and achieved a high accuracy with an Area Under the Receiver Operating Characteristic Curve (AUROC) of 0.978. The combined panel was also able to detect culture-negative patients and provided a faster diagnosis. Besides, microfluidics has advantages of less time consuming, easier to manufacture, less sample loading, less complex, and portable. Therefore, our approach is of great potential to become a bedside sepsis detection method.

A comparison of transferrin-receptor and epithelial cellular adhesion molecule targeting for microfluidic separation of cancer cells.

Microfluidic, flow cytometry, and immunomagnetic methods for cancer cell isolation have heavily relied on the Epithelial Cellular Adhesion Molecule (EpCAM) for affinity separation. While EpCAM has been used extensively for circulating tumor cell isolation, it cannot be used to isolate non-epithelial cells. The human transferrin receptor (CD71) can also be used for cancer cell isolation and has the advantage that as an affinity target it can separate virtually any cancer cell type, regardless of disease origin. However, direct comparison of the capture ability of EpCAM and CD71 has not been reported previously. In this work, cell capture with both EpCAM and CD71 were studied using a novel higher-throughput herringbone cell separation microfluidic device. Five separation chip models were designed and the one with the highest capture efficiency (average 90 ± 10%) was chosen to compare antigen targets for cell capture. Multiple cancer cell lines including CCRF-CEM, PC-3 and MDA-MB-231 were tested for cell capture performance using both ligands (anti-CD71 and anti-EpCAM) in the optimized chip design. PC-3 and MDA-MB-231 cells were spiked into blood at concentrations ranging from 0.5%-10%. PC-3 cells were separated by anti-CD71 and anti-EpCAM with 32-37% and 31-50% capture purity respectively, while MDA-MB-231 were separated with 35-53% and 33-56% capture purity using anti-CD71 and anti-EpCAM for all concentrations. The enrichment factor for the lowest concentrations of cells in blood ranged from 66-74X. The resulting enrichment of cancer cells shows that anti-CD71 was found to be statistically similar to anti-EpCAM for epithelial cancer cells, while anti-CD71 can be further used for non-epithelial cells, where anti-EpCAM cannot be used.

Microfluidics for sepsis early diagnosis and prognosis: a review of recent methods.

Sepsis is a complex disorder of immune system response to infections that can be caused by a wide range of clinical contexts. Traditional methods for sepsis detection include molecular diagnosis, biomarkers either based on protein concentration or cell surface expression, and microbiological cultures. Development of point-of-care (POC) instruments, which can provide high accuracy and consume less time, is in unprecedented demand. Within the past few years, applications of microfluidic systems for sepsis detection have achieved excellent performance. In this review, we discuss the most recent microfluidic applications specifically in sepsis detection, and propose their advantages and disadvantages. We also present a comprehensive review of other traditional and current sepsis diagnosis methods to obtain a general understanding of the present conditions, which can hopefully direct the development of a new sepsis roadmap.

Evaluating the Timeliness and Specificity of CD69, CD64, and CD25 as Biomarkers of Sepsis in Mice.

ABSTRACT: Sepsis occurs when an infection induces a dysregulated immune response, and is most commonly bacterial in origin. This condition requires rapid treatment for successful patient outcomes. However, the current method to confirm infection (blood culture) requires up to 48 h for a positive result and many true cases remain culture-negative. Therefore, new diagnostic tests are urgently needed. Recent clinical studies suggest that CD69, CD64, and CD25 may serve as useful biomarkers of sepsis. In this study, we evaluated the cecal ligation and puncture and cecal slurry mouse models as tools to study these biomarkers in young and aged mice, and elucidate the timeliness and specificity of sepsis diagnosis. Fluorescence-activated cell sorting analysis revealed that all three biomarkers were elevated on blood leukocytes during sepsis. CD69 was specifically upregulated during sepsis, while CD64 and CD25 were also transiently upregulated in response to sham surgery. The optimal biomarker, or combination of biomarkers, depended on the timing of detection, mouse age, and presence of surgery. CD69 demonstrated an excellent capacity to distinguish sepsis, and in some scenarios the diagnostic performance was enhanced by combining CD69 with CD64. We also analyzed biomarker expression levels on specific cell populations (lymphocytes, monocytes, and neutrophils) and determined the cell types that upregulate each biomarker. Elevations in blood biomarkers were also detected via microfluidic analyses; in this case CD64 distinguished septic mice from naive controls. Our results suggest that CD69 and CD64 are valuable biomarkers to rapidly detect sepsis, and that mouse models are useful to study and validate sepsis biomarkers.

Self-assembly of reversed bilayer vesicles through pnictogen bonding: water-stable supramolecular nanocontainers for organic solvents.

A new air and moisture stable antimony thiolate compound has been prepared that spontaneously forms stable hollow vesicles. Structural data reveals that pnictogen bonding drives the self-assembly of these molecules into a reversed bilayer. The ability to make these hollow, spherical, and chemically and temporally stable vesicles that can be broken and reformed by sonication allows these systems to be used for encapsulation and compartmentalisation in organic media. This was demonstrated through the encapsulation and characterization of several small organic reporter molecules.

Tandem microfluidic chip isolation of prostate and breast cancer cells from simulated liquid biopsies using CD71 as an affinity ligand.

The use of blood as a liquid biopsy provides a minimally invasive and less traumatic approach for initial cancer screens as well as patient monitoring. However, current clinical protocols require a priori knowledge of cancer type for liquid biopsy analyses. Previously, we proposed the use of the human transferrin 1 receptor protein (CD71) as a universal capture target for cancer cells analyses. In this study we have attempted to identify the lowest limit of detection for circulating tumor cells of prostate (PC-3) and breast cancers (MDA-MB-231) using CD71. We used a novel high-throughput herringbone chip design which could extract PC-3 cells at 34 ± 5% purity and MDA-MB-231 cells at 43 ± 35% purity when spiked to lysed blood at 0.1%. MDA-MB-231 cell spiked samples showed higher standard deviation, but the system captured 55 ± 16 cells, which is a sufficient number of cells for subsequent analyses. Further, this herringbone chip design has been shown to be compatible with an erythrocyte lysis chip we have described in previous studies. This circuit was capable of capturing 510 ± 120 cells with a purity of 82 ± 14% using <7 µL of a whole blood sample spiked with 10% MDA-MB-231 cells. Using an erythrocyte lysis circuit eliminates the need for human intervention for target cell enrichment, thereby reducing cell loss and sample contamination. We have shown that, when used with the high-throughput herringbone chip CD71 has the capacity to sensitively detect rare target cells for routine low-cost cancer screens.

Core Size does not Affect Blinking Behavior of Dye-Doped Ag@SiO2 Core-Shell Nanoparticles for Super-Resolution Microscopy.

Dye-doped nanoparticles have been investigated as bright, luminescent labels for super -resolution microscopy via localization methods. One key factor in super-resolution is the size of the luminescent label, which in some cases results in a frame shift between the label target and the label itself. Ag@SiO2 core-shell nanoparticles, doped with organic fluorophores, have shown promise as super-resolution labels. One key aspect of these nanoparticles is that they blink under certain conditions, allowing super-resolution localization with a single excitation source in aqueous solution. In this work, we investigated the effects of both the Ag core and the silica (SiO2) shell on the self-blinking properties of these nanoparticles. Both core size and shell thickness were manipulated by altering the reaction time to determine core and shell effects on photoblinking. Size and shell thickness were investigated individually under both dry and hydrated conditions and were then doped with a 1 mM solution of Rhodamine 110 for analysis. We observed that the cores themselves are weakly luminescent and are responsible for the blinking observed in the fully-synthesized metal-enhanced fluorescence nanoparticles. There was no statistically significant difference in photoblinking behavior-both intensity and duty cycle-with decreasing core size. This observation was used to synthesize smaller nanoparticles ranging from approximately 93 nm to 110 nm as measured using dynamic light scattering. The blinking particles were localized via super-resolution microscopy and show single particle self-blinking behavior. As the core size did not impact blinking performance or intensity, the nanoparticles can instead be tuned for optimal size without sacrificing luminescence properties.

Nanoparticle modification of microfluidic cell separation for cancer cell detection and isolation.

Cancer is a major health problem in the United States with extremely high mortality. The detection and isolation of cancer cells are becoming increasingly important for cancer diagnosis. We describe a microfluidic device modified with silica nanoparticles to enhance the isolation of cancer cells using affinity separation. The isolation of seven different cancer cell lines spiked into liquid biopsies was demonstrated and compared with unmodified separation devices. Cancer cells were isolated using CD71 which has already been demonstrated to be a widespread "net" for capturing cancer cells of any phenotype as the affinity target. The capture efficiency of our nanoparticle (NP)-modified HB chip showed significant differences compared with the normal HB chip, exhibiting an average increase of 16%. The cell enrichment increased by a factor of 2 over unmodified chips. Patient-derived ALL cells, COG-LL-332, were spiked into blood with concentrations ranging from 1% to 20% of total leukocytes, and isolated with the purity of 41%-65%. The results of this study demonstrated that the increase of cell-chip interactions after nanoparticle modification improved capture efficiency and capture purity, and can be applied to a wide range of cell separations.

Modulation and study of photoblinking behavior in dye doped silver-silica core-shell nanoparticles for localization super-resolution microscopy.

Blinking of fluorescent nanoparticles is a compelling phenomenon with widely debated mechanisms. The ability to inhibit or control blinking is important for applications in the field of optical, semiconductor and fluorescent imaging. Self-blinking nanomaterials are also attractive labels for localization-based super-resolution microscopy. In this work, we have synthesized silver core silica nanoparticles (Ag@SiO2) doped with Rhodamine 110 and studied the parameters that affect blinking. We found that under nitrogen rich conditions the nanoparticles shifted towards higher duty cycles. Also, it was found that hydrated nanoparticles showed a less drastic response to nitrogen rich conditions as compared to dried nanoparticles, indicating that surrounding matrix played a role in the response of nanoparticles to molecular oxygen. Further, the blinking is not a multi-body phenomena, super-resolution localization combined with intensity histogram analysis confirmed that single particles are emitting.

Isolation of proliferating cells from whole blood using Human Transferrin Receptor in a two-stage separation system.

Blood is a routinely tested biological fluid for diagnosis and monitoring of diseases as many diseases would trigger a change in white blood cell count. Thus, several methods have been established to isolate or enrich white blood cells from patient blood samples for such analyses. One method of preparing an enriched white blood cell sample is through the selective lysis of red blood cells by hypotonic shock and restoration of osmolarity to maintain viability of target white blood cells. An inherent problem with this approach is the loss of target cells during sample handling. We report a two-stage separation system that can perform lysis and restoration of osmolarity of blood on-chip and direct the resultant sample to the second step of the analysis. Hence, there is no loss of sample. The post-lysis makeup features a protein-rich buffer to help stabilize cells. As proof of concept, we spiked HL-60 cells into a whole blood and a pre-lysed blood sample and compared capture metrics of each method using a downstream affinity separation. The capture efficiency of the whole blood sample ranged between 40 and 80% using <7 µL of sample compared to 10-52% from 60 µL of pre-lysed blood required for similar analysis. In addition, both pre-lysed and whole blood samples showed no significant difference in purity and viability. This two-stage separation system has demonstrated the capacity to replace centrifugation and wash steps required for the preparation of lysed blood, for white blood cell analyses.

The effect of protein expression on cancer cell capture using the Human Transferrin Receptor (CD71) as an affinity ligand.

Cancer cell detection in liquid biopsies has been a widely studied application in many microfluidic devices. The use of a common antibody, such as the epithelial cell adhesion molecule (Anti-EpCAM) or other specific antibodies, has facilitated the detection and study of many cancers. However, the use of such antibodies requires a priori knowledge of the cancer source, and many cancer subtypes are missed in screening applications. There remains a need to study a wider range of cancers that maintain the streamlined antibody approach in cell affinity separations. The Human transferrin receptor (CD71) has recently been demonstrated as a cancer cell affinity target in blood samples. CD71 expression in blood cells is low, whereas proliferating cancer cells have a higher expression of the surface protein. CD71 expression is variable with cell cycle, which can impact cell separations. In this work, we investigated the effects of cell cycle and CD71 expression on cell capture metrics. Six cancer cell lines were isolated from blood via CD71 affinity capture, with a capture efficiency and purity that varied with CD71 expression. Despite variation in CD71 expression, the affinity was sufficient to isolate cancer cells spiked into blood; under optimal conditions, CD71-based capture resulted in capture purity >80%. We conclude that CD71 affinity separations show potential as a biomarker for cancer studies without sacrificing sensitivity and selectivity, and that cancer cells can be isolated from liquid biopsies over a range of expression of the target protein.