RESUMEN
Room-temperature ionic liquid (RTIL) electrolytes have attracted much attention for use in advanced, safe lithium-ion batteries (LIB) owing to their nonvolatility, high conductivity, and great thermal stability. However, LIBs containing RTIL-electrolytes exhibit poor cyclability because electrochemical side reactions cause problematic surface failures of the cathode. Here, we demonstrate that a thin, homogeneous surface film, which is electrochemically generated on LiCoO2 from an RTIL-electrolyte containing an unsaturated substituent on the cation (1-allyl-1-methylpiperidinium bis(trifluoromethanesulfonyl)imide, AMPip-TFSI), can avert undesired side reactions. The derived surface film comprised of a high amount of organic species from the RTIL cations homogenously covered LiCoO2 with a <25 nm layer and helped suppress unfavorable thermal reactions as well as electrochemical side reactions. The superior performance of the cell containing the AMPip-TFSI electrolyte was further elucidated by surface, electrochemical, and thermal analyses.
RESUMEN
Rapid growth of mobile and even wearable electronics is in pursuit of high-energy-density lithium-ion batteries. One simple and facile way to achieve this goal is the elimination of nonelectroactive components of electrodes such as binders and conductive agents. Here, we present a new concept of monocomponent electrodes comprising solely electroactive materials that are wrapped with an insignificant amount (less than 0.4 wt %) of conducting polymer (PEDOT:PSS or poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate)). The PEDOT:PSS as an ultraskinny surface layer on electroactive materials (LiCoO2 (LCO) powders are chosen as a model system to explore feasibility of this new concept) successfully acts as a kind of binder as well as mixed (both electrically and ionically) conductive film, playing a key role in enabling the monocomponent electrode. The electric conductivity of the monocomponent LCO cathode is controlled by simply varying the PSS content and also the structural conformation (benzoid-favoring coil structure and quinoid-favoring linear or extended coil structure) of PEDOT in the PEDOT:PSS skin. Notably, a substantial increase in the mass-loading density of the LCO cathode is realized with the PEDOT:PSS skin without sacrificing electronic/ionic transport pathways. We envisage that the PEDOT:PSS-skinned electrode strategy opens a scalable and versatile route for making practically meaningful binder-/conductive agent-free (monocomponent) electrodes.
RESUMEN
As a promising power source to boost up advent of next-generation ubiquitous era, high-energy density lithium-ion batteries with reliable electrochemical properties are urgently requested. Development of the advanced lithium ion-batteries, however, is staggering with thorny problems of performance deterioration and safety failures. This formidable challenge is highly concerned with electrochemical/thermal instability at electrode material-liquid electrolyte interface, in addition to structural/chemical deficiency of major cell components. Herein, as a new concept of surface engineering to address the abovementioned interfacial issue, multifunctional conformal nanoencapsulating layer based on semi-interpenetrating polymer network (semi-IPN) is presented. This unusual semi-IPN nanoencapsulating layer is composed of thermally-cured polyimide (PI) and polyvinyl pyrrolidone (PVP) bearing Lewis basic site. Owing to the combined effects of morphological uniqueness and chemical functionality (scavenging hydrofluoric acid that poses as a critical threat to trigger unwanted side reactions), the PI/PVP semi-IPN nanoencapsulated-cathode materials enable significant improvement in electrochemical performance and thermal stability of lithium-ion batteries.
RESUMEN
Surface engineering of sponge-like Si particles is necessary to alleviate the large volume expansion of Si during the lithiation-delithiation process and to mitigate the unwanted interfacial reactions upon cycling. The sponge-like Si structuring and introduction of double layers consisting of carbon and polyimide enabled us to make high performance Si anode materials exhibiting a high specific capacity and highly stable cycling.