RESUMEN
The melt analysis feature in most real-time polymerase chain reaction (PCR) instruments is a simple method for determining if expected or unexpected products are present. High-resolution melt (HRM) analysis seeks to improve the precision of melt temperature measurements for better PCR product sequence characterization. In the area of tuberculosis (TB) drug susceptibility screening, sequencing has shown that a single base change can be sufficient to make a first-line TB drug ineffective. In this study, a reagent-based calibration strategy based on synthetic left-handed (L)-DNA, designated LHRM, was developed to confirm validation of a PCR product with single base resolution. To test this approach, a constant amount of a double-stranded L-DNA melt comparator was added to each sample and used as a within-sample melt standard. The performance of LHRM and standard HRM was used to classify PCR products as drug-susceptible or not drug-susceptible with a test bed of nine synthetic katG variants, each containing single or multiple base mutations that are known to confer resistance to the first-line TB drug isoniazid (INH). LHRM achieved comparable classification to standard HRM relying only on within-sample melt differences between L-DNA and the unknown PCR product. Using a state-of-the-art calibrated instrument and multiple sample classification analysis, standard HRM was performed at 66.7% sensitivity and 98.8% specificity. Single sample analysis incorporating L-DNA for reagent-based calibration into every sample maintained high performance at 77.8% sensitivity and 98.7% specificity. LHRM shows promise as a high-resolution single sample method for validating PCR products in applications where the expected sequence is known.
Asunto(s)
ADN , Mycobacterium tuberculosis , Mycobacterium tuberculosis/genética , Mycobacterium tuberculosis/efectos de los fármacos , ADN/análisis , ADN/genética , Reacción en Cadena de la Polimerasa/métodos , Temperatura de Transición , Antituberculosos/farmacología , Reacción en Cadena en Tiempo Real de la Polimerasa/métodosRESUMEN
In previous reports, we described a PCR cycle control approach in which the hybridization state of optically labeled L-DNA enantiomers of the D-DNA primers and targets determined when the thermal cycle was switched from cooling to heating and heating to cooling. A consequence of this approach is that it also "adapts" the cycling conditions to compensate for factors that affect the hybridization kinetics of primers and targets. It assumes, however, that the hybridization state of the labeled L-DNA analogs accurately reflects the hybridization state of the D-DNA primers and targets. In this report, the Van't Hoff equation is applied to determine the L-DNA concentration and ratio of L-DNA strands required by this assumption. Simultaneous fluorescence and temperature measurements were taken during L-DNA controlled cycling, and the optical and thermal switch points compared as a function of both total L-DNA concentration and ratio of strands. Based on the Van't Hoff relationship and these experimental results, L-DNA best mirrors the hybridization of PCR primers and targets when total L-DNA concentration is set equal to the initial concentration of the D-DNA primer of interest. In terms of strand ratios, L-DNA hybridization behavior most closely matches the behavior of their D-DNA counterparts throughout the reaction when one of the L-DNA strands is far in excess of the other. The L-DNA control algorithm was then applied to the practical case of the SARS-CoV-2 N2 reaction, which has been shown to fail or have a delayed Cq when PCR was performed without nucleic acid extraction. PCR Cq values for simulated "unextracted" PCR samples in a nasopharyngeal background and in an NaCl concentration similar to that of viral transport media were determined using either the L-DNA control algorithm (N = 6) or preset cycling conditions (N = 3) and compared to water background controls run in parallel. For preset cycling conditions, the presence of nasopharyngeal background or a high salt background concentration significantly increased Cq, but the L-DNA control algorithm had no significant delay. This suggests that a carefully designed L-DNA-based control algorithm "adapts" the cycling conditions to compensate for hybridization errors of the PCR D-DNA reactants that produce false negatives.
Asunto(s)
ADN , Hibridación de Ácido Nucleico , Reacción en Cadena de la Polimerasa , Reacción en Cadena de la Polimerasa/métodos , ADN/química , ADN/análisis , SARS-CoV-2/genética , Cartilla de ADN/química , COVID-19 , HumanosRESUMEN
Exhaled biologic material is the source for the spread of many respiratory tract infections. To avoid the high-level of biosafety required to manage dangerous pathogens, we developed a safer framework using the endogenous surrogate targets RNase P and Streptococcus mitis as a means to sample exhaled biologics. Our exhalation collection scheme uses nanoscale fibrous poly(vinyl alcohol) substrates as facemask inserts. After a period of breathing or speaking, the inserts are removed and dissolved. RNase P RNA and S. mitis DNA are extracted for quantification by multiplexed RT-qPCR. Both surrogate biomarkers were detected in all samples obtained during breathing for at least five minutes or speaking for one minute. Phrases repeated 30 times had the most copies with 375 ± 247 of S. mitis and 54 ± 33 of RNase P. When the phrases were repeated just 5 times, the S. mitis copies collected were still detectable but at a significantly lower level of 11 ± 5 for S. mitis and 12 ± 9 for RNase P. These results demonstrate a collection and quantification framework that can be readily adapted to further characterize the exhalation of nanoscale biologic materials from healthy individuals, explore new collection designs safely, and serve as a method to incorporate sample controls for future pathogen exhalation studies.
Asunto(s)
Productos Biológicos , Nanofibras , Humanos , Espiración , Ribonucleasa P , RespiraciónRESUMEN
PCR-based diagnostics generally require nucleic acid extraction from patient specimens prior to amplification. As highlighted early in the COVID-19 pandemic, extraction steps may be difficult to scale during times of massive demand and limited reagent supply. Forgoing an extraction step, we previously reported that the N1 primer/probe-set of the widespread CDC COVID-19 assay maintains high categorical sensitivity (95%) and specificity (100%) with direct inoculation of viral transport media (VTM) into qRT-PCR reactions. In contrast, the N2 set demonstrated a prominent Ct delay and low sensitivity (33%) without extraction. In the current study, we have improved the performance of this modified CDC assay (in particular the N2 set) by incorporating N1/N2/RNase P multiplexing and dissecting the effects of annealing temperature, VTM interference, and inoculum volume. The latter two factors exerted a more prominent effect on the performance of N2 than N1, although these effects were largely overcome through elevated annealing temperature. This unextracted/multiplex protocol was evaluated with 41 SARS-CoV-2 positive and 43 negative clinical samples, demonstrating a categorical sensitivity of 92.7% and specificity of 100% versus the unmodified CDC methodology. Overall, this work offers a generalizable strategy to maximize testing capabilities for COVID-19 or other emerging pathogens when resources are constrained.
Asunto(s)
COVID-19 , SARS-CoV-2 , COVID-19/diagnóstico , Prueba de COVID-19 , Centers for Disease Control and Prevention, U.S. , Técnicas de Laboratorio Clínico/métodos , Humanos , Pandemias , Reacción en Cadena de la Polimerasa , ARN Viral/análisis , ARN Viral/genética , SARS-CoV-2/genética , Sensibilidad y Especificidad , Estados UnidosRESUMEN
HIV develops single nucleotide polymorphisms (SNPs), some of which lead to drug resistance mutations (DRMs) that prevent therapeutic viral suppression. Genomic sequencing enables healthcare professionals to select effective combination antiretroviral therapy (ART) to achieve and maintain viral suppression. However, sequencing technologies, which are resource-intensive, are limited in their availability. This report describes the first step toward a highly specific ligation-based SNP discrimination method with endpoint PCR detection, which is more suitable for resource-limited clinics. The approach is based on magnetic bead processing to maximize reaction product transfer and minimize the carryover of incompatible buffer for three consecutive enzymatic reactionsâreverse transcription (RT), oligonucleotide ligation assay (OLA), and PCR. The method improved PCR detection following RT â OLA by 8.06 cycles (â¼250-fold) compared to direct pipette processing and detected between 103 and 104 RNA copies per reaction. In studies with synthesized nucleic acids based on the well-studied HIV mutation, K103N, the assay successfully differentiated between wild-type and mutant for RNA targets with high specificity. With further development, this design provides a pathway for SNP detection with more accessible PCR instrumentation and is a step toward a self-contained processing approach that incorporates the SNP specificity of the ligation reaction for more effective clinical management of DRMs in resource-constrained settings.
Asunto(s)
Fármacos Anti-VIH , Farmacorresistencia Viral , Infecciones por VIH , VIH-1 , Fármacos Anti-VIH/farmacología , Fármacos Anti-VIH/uso terapéutico , Farmacorresistencia Viral/genética , Infecciones por VIH/tratamiento farmacológico , VIH-1/efectos de los fármacos , VIH-1/genética , Humanos , Fenómenos Magnéticos , MutaciónRESUMEN
Nucleic acid-based diagnostic tests often require isolation and concentration of nucleic acids from biological samples. Commercial purification kits are difficult to use in low-resource settings because of their cost and insufficient laboratory infrastructure. Several recent approaches based on the use of magnetic beads offer a potential solution but remain limited to small volume samples. We have developed a simple and low-cost nucleic acid extraction method suitable for isolation and concentration of nucleic acids from small or large sample volumes. The method uses magnetic beads, a transfer pipette, steel wool, and an external magnet to implement high-gradient magnetic separation (HGMS) to retain nucleic acid-magnetic bead complexes within the device's steel wool matrix for subsequent processing steps. We demonstrate the method's utility by extracting tuberculosis DNA from both sputum and urine, two typical large volume sample matrices (5-200 mL), using guanidine-based extraction chemistry. Our HGMS-enabled extraction method is statistically indistinguishable from commercial extraction kits when detecting a spiked 123-base DNA sequence. For our HGMS-enabled extraction method, we obtained extraction efficiencies for sputum and urine of approximately 10 and 90%, whereas commercial kits obtained 10-17 and 70-96%, respectively. We also used this method previously in a blinded sample preparation comparison study published by Beall et al., 2019. Our manual extraction method is insensitive to high flow rates and sample viscosity, with capture of â¼100% for flow rates up to 45 mL/min and viscosities up to 55 cP, possibly making it suitable for a wide variety of sample volumes and types and point-of-care users. This HGMS-enabled extraction method provides a robust instrument-free method for magnetic bead-based nucleic acid extraction, potentially suitable for field implementation of nucleic acid testing.
Asunto(s)
Técnicas Bacteriológicas/métodos , ADN Bacteriano/aislamiento & purificación , Imanes/química , Mycobacterium tuberculosis/aislamiento & purificación , Ácidos Nucleicos/aislamiento & purificación , ADN Bacteriano/análisis , ADN Bacteriano/orina , Humanos , Ácidos Nucleicos/análisis , Ácidos Nucleicos/orina , Reacción en Cadena en Tiempo Real de la Polimerasa , Manejo de Especímenes , Esputo/química , Esputo/microbiología , Tuberculosis/diagnósticoRESUMEN
Urine samples are increasingly used for diagnosing infections including Escherichia coli, Ebola virus, and Zika virus. However, extraction and concentration of nucleic acid biomarkers from urine is necessary for many molecular detection strategies such as polymerase chain reaction (PCR). Since urine samples typically have large volumes with dilute biomarker concentrations making them prone to false negatives, another impediment for urine-based diagnostics is the establishment of appropriate controls particularly to rule out false negatives. In this study, a mouse glyceraldehyde 3-phosphate dehydrogenase (GAPDH) DNA target was added to retrospectively collected urine samples from tuberculosis (TB)-infected and TB-uninfected patients to indicate extraction of intact DNA and removal of PCR inhibitors from urine samples. We tested this design on surrogate urine samples, retrospective 1milliliter (mL) urine samples from patients in Lima, Peru and retrospective 5mL urine samples from patients in Cape Town, South Africa. Extraction/PCR control DNA was detectable in 97% of clinical samples with no statistically significant differences among groups. Despite the inclusion of this control, there was no difference in the amount of TB IS6110 Tr-DNA detected between TB-infected and TB-uninfected groups except for samples from known HIV-infected patients. We found an increase in TB IS6110 Tr-DNA between TB/HIV co-infected patients compared to TB-uninfected/HIV-infected patients (N=18, p=0.037). The inclusion of an extraction/PCR control DNA to indicate successful DNA extraction and removal of PCR inhibitors should be easily adaptable as a sample preparation control for other acellular sample types.
Asunto(s)
ADN/aislamiento & purificación , Marcadores Genéticos , Ratones/genética , Técnicas de Diagnóstico Molecular/métodos , Mycobacterium tuberculosis/genética , Reacción en Cadena de la Polimerasa/métodos , Tuberculosis/orina , Orina/microbiología , Animales , Secuencia de Bases , Coinfección , Marcación de Gen/métodos , Gliceraldehído-3-Fosfato Deshidrogenasas/genética , Infecciones por VIH/complicaciones , Humanos , Mycobacterium tuberculosis/aislamiento & purificación , Fragmentos de Péptidos/genética , Estudios Retrospectivos , Sensibilidad y Especificidad , Sudáfrica , Tuberculosis/complicaciones , Tuberculosis/diagnóstico , Tuberculosis/microbiologíaRESUMEN
Early achievements in biomedical approaches for HIV prevention included physical barriers (condoms), clean injection equipment (both for medical use and for injection drug users), blood and blood product safety, and prevention of mother-to-child transmission. In recent years, antiretroviral drugs to reduce the risk of transmission (when the infected person takes the medicines; treatment as prevention) or reduce the risk of acquisition (when the seronegative person takes them; preexposure prophylaxis) have proven to be efficacious. Circumcision of men has also been a major tool relevant for higher prevalence regions such as sub-Saharan Africa. Well-established prevention strategies in the control of sexually transmitted diseases and tuberculosis are highly relevant for HIV (ie, screening, linkage to care, early treatment, and contact tracing). Unfortunately, only slow progress is being made in some available HIV-prevention strategies such as family planning for HIV-infected women who do not want more children and prevention of mother-to-child HIV transmission. Current studies seek to integrate strategies into approaches that combine biomedical, behavioral, and structural methods to achieve prevention synergies. This review identifies the major biomedical approaches demonstrated to be efficacious that are now available. We also highlight the need for behavioral risk reduction and adherence as essential components of any biomedical approach.