Does the proximal screw type affect stress and strain in pastern arthrodesis with locking plate in horses?

The implantation of unicortical cortex screws in the proximal hole of locking compression plates (LCP) has been recommended for proximal interphalangeal (PIP) arthrodesis in horses to prevent fractures resulting from stress risers in the proximal phalanx (P1). However, this cortex screw fixation technique may limit efficient dorsal compression of the PIP joint by the plate, potentially affecting the stability of the construct. In this study, we aimed to measure stress and strain in P1 and the plate using an ex vivo model of PIP arthrodesis in horses. We employed various implantation methods and proximal screw types in conjunction with two 5.5 mm transarticular cortex screws. Ten pairs of equine forelimbs were divided into four groups based on proximal screw placement: GUC (unicortically placed cortex screw), GBC (bicortically placed cortex screw), GUL (unicortically placed locking screw), and GBL (bicortically placed locking screw). We calculated the magnitude and direction of strain, strain ratio, and stress using strain gauges during an axial compression mechanical testing. The palmar surface of P1 exhibited higher stress and strains than the dorsal surface, with the plate part located at the articular level suffered more stress than the proximal part. Both the implantation method and proximal screw type significantly influenced the analyzed parameters. The GUC promoted greater changes in strain direction in the proximal portion of the P1. Bicortical placement of a cortex screw appears to be the most suitable option for filling the proximal hole of the LCP, because it allows effective dynamic compression via the plate and prevents abrupt shifts in the direction of the forces acting on the proximal part of P1 during loading.

Hyperbaric oxygen therapy enhances graft healing and mechanical properties after anterior cruciate ligament reconstruction: An experimental study in rabbits.

Hyperbaric oxygen therapy (HBOT) has proven successful in wound healing. However, its potential effects on anterior cruciate ligament (ACL) injuries remain uncertain. This study aimed to investigate the impact of HBOT on graft healing following ACL reconstruction in rabbits. Male New Zealand rabbits underwent ACL reconstruction and were randomly divided into two groups: the HBOT group and the ambient air group. The HBOT group received 100% oxygen at 2.5 atmospheres absolute for 2 h daily for 5 consecutive days, starting from the first day after surgery. The ambient air group was maintained in normal room air throughout the entire period. After 12 weeks following the surgery, animals were euthanized, and their knees were harvested for analysis. The HBOT group demonstrated superior graft maturation and integration in comparison to the ambient air group, as evidenced by lower graft signal intensity on magnetic resonance imaging, decreased femoral and tibial tunnel size, and higher bone mineral density values on high-resolution peripheral quantitative computed tomography scans. Additionally, biomechanical testing indicated that the HBOT group had greater load to failure and stiffness values than the ambient air group. In conclusion, the adjuvant use of HBOT improved ACL graft maturation and integration, reduced tunnel widening, and enhanced the biomechanical properties of the graft. These results may provide important insights into the potential clinical application of HBOT as a therapeutic intervention to enhance graft healing after ACL reconstruction, paving the way for further research in this area.

Zerumbone Disturbs the Extracellular Matrix of Fluconazole-Resistant Candida albicans Biofilms.

This study assessed the effect of zerumbone (ZER) against fluconazole-resistant (CaR) and -susceptible Candida albicans (CaS) biofilms and verified the influence of ZER on extracellular matrix components. Initially, to determine the treatment conditions, the minimum inhibitory concentration (MIC), the minimum fungicidal concentration (MFC) and the survival curve were evaluated. Biofilms were formed for 48 h and exposed to ZER at concentrations of 128 and 256 µg/mL for 5, 10 and 20 min (n = 12). One group of biofilms did not receive the treatment in order to monitor the effects. The biofilms were evaluated to determine the microbial population (CFU/mL), and the extracellular matrix components (water-soluble polysaccharides (WSP), alkali-soluble polysaccharides (ASPs), proteins and extracellular DNA (eDNA), as well as the biomass (total and insoluble) were quantified. The MIC value of ZER for CaS was 256 µg/mL, and for CaR, it was 64 µg/mL. The survival curve and the MFC value coincided for CaS (256 µg/mL) and CaR (128 µg/mL). ZER reduced the cellular viability by 38.51% for CaS and by 36.99% for CaR. ZER at 256 µg/mL also reduced the total biomass (57%), insoluble biomass (45%), WSP (65%), proteins (18%) and eDNA (78%) of CaS biofilms. In addition, a reduction in insoluble biomass (13%), proteins (18%), WSP (65%), ASP (10%) and eDNA (23%) was also observed in the CaR biofilms. ZER was effective against fluconazole-resistant and -susceptible C. albicans biofilms and disturbed the extracellular matrix.

Effect of Bioactive Filler Addition on the Mechanical and Biological Properties of Resin-Modified Glass Ionomer.

The maintenance of affected dentin can promote the greater conservation of tooth structure. The development of materials that have properties capable of reducing the demineralizing potential and/or even helping in dental remineralization is important for conservative dentistry. This study aimed to evaluate, in vitro, the alkalizing potential, fluoride as well as calcium ion release ability, antimicrobial activity, and dentin remineralization properties of resin-modified glass ionomer cement (RMGIC) incorporated with a bioactive filler (niobium phosphate (NbG) and bioglass (45S5)). The study samples were grouped into RMGIC, NbG, and 45S5. The materials' alkalizing potential, ability to release calcium as well as fluoride ions, and antimicrobial properties concerning Streptococcus mutans UA159 biofilms were analyzed. The remineralization potential was evaluated using the Knoop microhardness test, which was performed at different depths. The alkalizing and fluoride release potential was higher for the 45S5 group (p < 0.001) over time. An increase in the microhardness of demineralized dentin was observed in the 45S5 and NbG groups (p < 0.001). No differences in biofilm formation were observed between the bioactive materials, although 45S5 exhibited lower biofilm acidogenicity at different time points (p < 0.001) and greater calcium ion release in the microbial environment. A resin-modified glass ionomer cement enriched with bioactive glasses, particularly 45S5, is a promising alternative for the treatment of demineralized dentin.

DNase enhances photodynamic therapy against fluconazole-resistant Candida albicans biofilms.

OBJECTIVE: This study evaluated the effectiveness of DNase I combined with antimicrobial photodynamic therapy, mediated by Photodithazine® and light-emitting diode light, against biofilms formed by a fluconazole-resistant Candida albicans strain (ATCC 96901) and two clinical isolates (R14 and R70). MATERIALS AND METHODS: Biofilms were grown for 48 h and exposed to DNase for 5 min, followed by application of a photosensitizer (P) and light (L), either singly or combined (P+L+, P-L+, P+L-, P-L-, P-L-DNase, P+L+DNase, P+L-DNase, and P-L+DNase; n = 12). Biofilm analysis included quantification of extracellular matrix components (water-soluble and insoluble polysaccharides, proteins and extracellular DNA), and biomass (total and insoluble), as well as the enumeration of colony-forming units. The data were analyzed using three-way analysis of variance with Bonferroni's post hoc test. RESULTS: The DNase treatment combined with aPDT showed a reduction of 1.92, 1.65, and 1.29 log10 of cell viability compared with untreated controls for ATCC 96901, R14, and R70 strains, respectively. It also reduced extracellular matrix contents of water-soluble polysaccharides (36.3%) and extracellular DNA (72.3%), as well as insoluble biomass content (43.3%). CONCLUSION: The three strains showed similar behavior when treated with DNase, and the extracellular matrix components were affected, improving the effectiveness of antimicrobial photodynamic therapy.

Outpatient pharmaceutical office: access to medicines in public health

Abstract We evaluated the implementation of the outpatient pharmaceutical office in a teaching hospital regarding the access to medicines available in the Unified Health System - SUS. This is a descriptive-analytical study, based on secondary data analysis of 735 appointments performed by the pharmacist from 2015 to 2017. Of the drugs prescribed to patients attended at the outpatient pharmacist office, 86.39% were listed in the National List of Essential Medicines - RENAME, of which 95.43% belonged to the Specialized Component of Pharmaceutical Assistance. Evaluating the patient's diagnosis against the inclusion criteria of the Clinical Protocols and Therapeutic Guidelines (PCDT), that the most frequent pharmaceutical interventions were: adequacy of the medication request documents (56.4%) and examination requests for pharmacotherapeutic follow up (28.5%). When the prescribed drugs were not included in RENAME/PCDT, the intervention was accepted in 90.3% of the proposals for exchange with available drug in SUS. Still, it was possible to refer the patient to primary care for renewal of continuity of treatment in 95.1% of cases. In conclusion, the role of the clinical pharmacist contributes to the resolution of untreated health problems by promoting access to medicines within the scope of SUS and their rational use in accordance with the PCDT.

Evaluation of ankle movements on a sudden inversion platform / Evaluación de los movimientos del tobillo en la plataforma de inversión súbita / Avaliação dos movimentos do tornozelo na plataforma de inversão súbita

ABSTRACT Introduction: Ankle sprains are frequent in sports activities and can lead to joint instability with clinical and performance consequences. Sudden ankle inversion platforms have been used to study the mechanism of ankle sprain. Objectives: To test a static platform that simulates the movement of ankle sprain (sudden inversion) in soccer players. Methods: A platform was developed to perform the sudden movement of an ankle sprain dissociated in three axes: inversion, plantar flexion, and medial rotation. A computer program was also created to read the angular velocity and the time to reach the maximum amplitude of the three axes of movement, synchronized with the platform movements. Thirty soccer players without ankle sprains were evaluated on the sudden inversion platform. Each athlete performed 10 randomly initiated tests, with five per leg. Results: There was no statistical difference in angular velocity or time to reach maximum range of motion of plantar flexion and medial rotation between the tests. During the tests, the angular velocity of the inversion increased. Conclusion: The sudden static platform evaluated the movements performed by the ankle during the sprain reliably in the 10 tests with no difference in the mechanical behavior. Level of evidence I; Therapeutic studies - Investigation of treatment outcomes.

RESUMEN Introducción: El esguince de tobillo es frecuente en las actividades deportivas y puede provocar inestabilidad articular con consecuencias clínicas y de desempeño. Se han utilizado plataformas de inversión súbita del tobillo para estudiar el mecanismo del esguince de tobillo. Objetivos: Probar una plataforma estática que simule el movimiento de esguince de tobillo (inversión súbita) en jugadores de fútbol. Métodos: La plataforma fue desarrollada para realizar el movimiento brusco del esguince de tobillo disociado en tres ejes: inversión, flexión plantar y rotación medial. También se creó un programa informático para leer la velocidad angular y el tiempo para alcanzar la máxima amplitud de los tres ejes de movimiento, sincronizados con los movimientos de la plataforma. Treinta futbolistas sin esguince de tobillo fueron evaluados en la plataforma súbita. Cada atleta realizó 10 pruebas, iniciadas al azar, cinco en cada pierna. Resultados: Entre las pruebas, no hubo diferencias estadísticas en las velocidades angulares y el tiempo para alcanzar la amplitud máxima de los movimientos de flexión plantar y rotación medial. Durante las pruebas, la velocidad angular de la inversión aumentó. Conclusión: La plataforma estática súbita, evaluada en 10 intentos, fue confiable para evaluar los movimientos realizados por el tobillo durante el esguince, y no hubo diferencias en el comportamiento mecánico. Nivel de Evidencia I; Estudios terapéuticos - Investigación de los resultados del tratamiento.

RESUMO Introdução: A entorse do tornozelo é frequente nas atividades esportivas, podendo levar à instabilidade articular com consequências clínicas e de desempenho. As plataformas de inversão súbita do tornozelo têm sido usadas para estudar o mecanismo de entorse do tornozelo. Objetivos: Testar uma plataforma estática que simule o movimento de entorse do tornozelo (inversão súbita) em jogadores de futebol. Métodos: A plataforma foi desenvolvida para realizar o movimento súbito da entorse de tornozelo dissociado em três eixos: inversão, flexão plantar e rotação medial. Também foi criado um programa de computador para leitura da velocidade angular e do tempo para atingir a amplitude máxima dos três eixos de movimento, sincronizados com os movimentos da plataforma. Trinta jogadores de futebol sem entorse de tornozelo foram avaliados na plataforma súbita. Cada atleta fez 10 testes, iniciados de forma aleatória, sendo cinco em cada perna. Resultados: Entre os testes, não houve diferença estatística das velocidades angulares e tempo para atingir a amplitude máxima do movimento de flexão plantar e rotação medial. Durante os testes, a velocidade angular da inversão aumentou. Conclusão: A plataforma estática súbita, avaliada em 10 tentativas, foi confiável para avaliar os movimentos executados pelo tornozelo durante a entorse, e não houve diferença de comportamento mecânico. Nível de evidência I; Estudos terapêuticos - Investigação dos resultados do tratamento.

Influenza vaccination strategy in acute coronary syndromes: the VIP-ACS trial.

AIMS: To evaluate whether a strategy of double-dose influenza vaccination during hospitalization for an acute coronary syndrome (ACS) compared with standard-dose outpatient vaccination (as recommended by current guidelines) would further reduce the risk of major cardiopulmonary events. METHODS AND RESULTS: Vaccination against Influenza to Prevent cardiovascular events after Acute Coronary Syndromes (VIP-ACS) was a pragmatic, randomized, multicentre, active-comparator, open-label trial with blinded outcome adjudication comparing two strategies of influenza vaccination following an ACS: double-dose quadrivalent inactivated vaccine before hospital discharge vs. standard-dose quadrivalent inactivated vaccine administered in the outpatient setting 30 days after randomization. The primary outcome was a hierarchical composite of all-cause death, myocardial infarction, stroke, unstable angina, hospitalization for heart failure, urgent coronary revascularization, and hospitalization for respiratory causes, analysed by the win ratio method. Patients were followed for 12 months. During two influenza seasons, 1801 participants were included at 25 centres in Brazil. The primary outcome was not different between groups, with 12.7% wins in-hospital double-dose vaccine group and 12.3% wins in the standard-dose vaccine group {win ratio: 1.02 [95% confidence interval (CI): 0.79-1.32], P = 0.84}. Results were consistent for the key secondary outcome, a hierarchical composite of cardiovascular death, myocardial infarction and stroke [win ratio: 0.94 (95% CI: 0.66-1.33), P = 0.72]. Time-to-first event analysis for the primary outcome showed results similar to those of the main analysis [hazard ratio 0.97 (95% CI: 0.75-1.24), P = 0.79]. Adverse events were infrequent and did not differ between groups. CONCLUSION: Among patients hospitalized with an ACS, double-dose influenza vaccination before discharge did not reduce cardiopulmonary outcomes compared with standard-dose vaccination in the outpatient setting. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov number: NCT04001504.

A biomechanical comparison of matched four-strand and five-strand semitendinosus-gracilis grafts / Estudo biomecânico comparativo entre enxertos quádruplos e quíntuplos pareados de tendões dos músculos semitendíneo e grácil / Estudio biomecânico comparativo entre injertos de tendones semitendinoso e gracilis cuádruple e quíntuple

ABSTRACT Introduction: Recent studies have shown that the likelihood of semitendinosus-gracilis graft rupture is inversely correlated to its diameter. A graft can be prepared in a five-strand or four-strand fashion to increase its diameter. However, the biomechanical superiority of five-strand semitendinosus-gracilis grafts is still under debate. Objective: This study aimed to evaluate the biomechanical characteristics of matched four-strand and five-strand human semitendinosus-gracilis grafts. Methods: We evaluated semitendinosus-gracilis tendons harvested from ten fresh human male and female cadavers, aged 18-60 years. Four-strand or five-strand grafts were prepared with the tendons and fixed to wooden tunnels with interference screws. Each graft was submitted to axial traction at 20 mm/min until rupture; the tests were donor matched. Data were recorded in real time and included the analysis of the area, diameter, force, maximum deformation and stiffness of the grafts. Results: The diameter, area and tunnel size were significantly greater in the five-strand grafts than in the four-strand grafts. There were no significant differences in biomechanical properties. The area and diameter of the graft were positively correlated to stiffness, and inversely correlated to elasticity. There was no significant correlation between graft size and maximum force at failure, maximum deformation or maximum tension. Conclusion: Five-strand hamstring grafts have greater area, diameter and tunnel size than four-strand grafts. There were no significant differences in biomechanical properties. In this model using interference screw fixation, the increases in area and diameter were correlated with an increase in stiffness and a decrease in elasticity. Level of evidence V; biomechanical study.

RESUMEN Introducción: Estudios recientes demostraron que la probabilidad de ruptura de los injertos semitendinoso y gracilis (STG) durante el pos operatorio de reconstrucción de ligamento cruzado anterior (LCA) está inversamente correlacionada a su diámetro. Un injerto puede ser preparado para obtener cuatro o cinco hebras para aumentar su diámetro, pero la superioridad biomecanica de los injertos STG de cinco hebras aún se mantiene en discusión. Objetivo: Evaluar las características biomecánicas de los injertos STG de humanos de cuatro o cinco hebras por pares. Métodos: Fueron evaluados tendones STG de diez cadaveres masculinos y diez cadaveres femeninos frescos, entre los 18 y 60 años. Los injertos de cuatro y cinco hebras fueron fijados en túneles de madera con tornillos de interferencia. Cada injerto fue sometido a una tracción axial de 200mm/min hasta su ruptura; estos tendones fueron separados por pares de acuerdo con sus donadores. Los datos fueron registrados en tiempo real y incluyeron el análisis del área del injerto, diámetro, fuerza, deformación máxima y rigidez. Resultados: Los resultados sobre el diámetro, el área y el tamaño del túnel fueron significativamente mayores en los injertos de cinco hebras que en los de cuatro. No existieron diferencias significativas en las propiedades biomecánicas. El área y el diámetro del injerto fueron correlacionados positivamente con la rigidez e inversamente con la elasticidad. No existió correlación significativa entre el tamaño del injerto y la fuerza máxima al momento de la falla, Máxima deformación o máxima tensión. Conclusión: Los injertos de isquiotibiales de cinco hebras tienen una área, diámetro y tamaño de túnel más grande que los injertos de cuatro hebras. No hubieron diferencias biomecánicas significativas. Los aumentos de área y diámetro en este modelo con la fijación de tornillo de interferencia fueron correlacionados con aumento de en la rigidez y una disminución en la elasticidad. Nivel de evidencia V; estudio biomecánico.

RESUMO Introdução: Estudos recentes demonstraram que a probabilidade de ruptura do enxerto dos tendões do semitendíneo e do grácil (STG) é correlacionada inversamente com seu diâmetro. Um enxerto pode ser preparado de forma quádrupla ou quíntupla para se aumentar o diâmetro. No entanto, a superioridade biomecânica dos enxertos STG quíntuplos ainda está em debate. Objetivo: Este estudo teve como objetivo avaliar as características biomecânicas dos enxertos STG humanos quádruplos ou quíntuplos pareados. Métodos: Foram avaliados tendões STG retirados de dez cadáveres masculinos e femininos frescos, com idades entre 18 e 60 anos. Os enxertos quádruplos ou quíntuplos foram preparados com os tendões e fixados em túneis de madeira com parafusos de interferência. Cada enxerto foi submetido à tração axial a 20 mm/min. até a ruptura; os testes foram pareados de acordo com os doadores. Os dados foram registrados em tempo real e incluíram a análise de área, diâmetro, força, deformação máxima e rigidez dos enxertos. Resultados: O diâmetro, a área e o tamanho do túnel foram significativamente maiores nos enxertos quíntuplos do que nos enxertos quádruplos. Não houve diferenças significativas nas propriedades biomecânicas. A área e o diâmetro do enxerto foram correlacionados positivamente com a rigidez e inversamente com a elasticidade. Não houve correlação significativa entre o tamanho do enxerto e a força máxima na falha, deformação máxima ou tensão máxima. Conclusão: Os enxertos quíntuplos dos músculos isquiotibiais têm maior área, diâmetro e tamanho do túnel do que os enxertos quádruplos. Não houve diferenças significativas nas propriedades biomecânicas. Neste modelo de fixação com parafuso de interferência, aumentos da área e do diâmetro foram correlacionados com o aumento da rigidez e a diminuição na elasticidade. Nível de evidência V; Estudo Biomecânico.

Comparison of a 3-hole 4.5-mm Dynamic Compression Plate and a 7-hole 5.5-mm Y Locking Compression Plate for Arthrodesis of the Proximal Interphalangeal Joint in Horses-an Ex Vivo Biomechanical Study.

The objective of this study was to compare the biomechanical properties in a single cycle axial loading test and the types of failures in two constructs (a 3-hole 4.5-mm dynamic compression plate (DCP) and 7-hole 5.5-mm Y locking compression plate (Y-LCP)) in equine proximal interphalangeal joint (PIJ) arthrodesis. One limb in each pair was randomly assigned to PIJ arthrodesis using a 3-hole 4.5-mm DCP combined with two transarticular 5.5-mm cortical screws, whereas the contralateral limb was submitted to PIJ arthrodesis using a 7-hole Y-shaped 5.0-mm LCP in conjunction with one transarticular 4.5-mm cortical screw inserted through the central plate hole. Cortical screws were inserted in lag fashion. Constructs were submitted to a single axial load cycle to failure. Construct stiffness, load, and deformation were analyzed. Dynamic compression plate and Y-LCP arthrodesis constructs did not differ significantly and were equally resistant to axial loading under the conditions studied (DCP and Y-LCP group stiffness, 5685.22 N/mm and 6591.10 N/mm, respectively). Arthrodesis of the PIJ using a DCP and two transarticular 5.5-mm cortical screws or a Y-LCP yielded biomechanically equivalent outcomes under the test conditions considered. However, Y-LCP provides less impact in the palmar/plantar bone. Application of Y-LCP with unicortical screws has equivalent biomechanical characteristics of DCP and may be a safe option for PIJ arthrodesis, where potential trauma secondary to applying bicortical screws in the palmar/plantar aspect of the pastern can be avoided.

Thick Graft Versus Double-Bundle Technique on Posterior Cruciate Ligament Reconstruction: Experimental Biomechanical Study with Cadavers.

Objective To evaluate the biomechanical effect of graft thickness compared with the double-bundle technique on posterior cruciate ligament (PCL) reconstruction in human cadaveric knees. Methods A total of 9 human cadaveric knees were tested in 5 conditions: intact knee (INT); single-bundle reconstruction with a 10-mm quadriceps tendon (SB); double-bundle reconstruction with a 10 mm-quadriceps tendon for the anterolateral bundle and a 7-mm doubled semitendinosus tendon for the posteromedial bundle (DB); single-bundle reconstruction with a 10-mm quadriceps tendon plus a 7-mm doubled semitendinosus tendon (SBT); and PCL-deficient (NoPCL). The posterior tibial translation (PTT) was measured in response to a 134-N posterior tibial load at 0 ∘ , 30 ∘ , 60 ∘ e 90 ∘ of knee flexion. Results The PTT values of the DB and SBT techniques were always significantly lower (better stability) than those of the SB technique. The PTT values of the SBT technique were significantly lower than those of the DB technique at 60 ∘ ( p = 0.005) and 90 ∘ ( p = 0.001). Conclusions Graft enlargement improves knee stability in isolated PCL reconstructions, whereas the graft division in the two-bundle technique worsens this stability at 60 ∘ and 90 ∘ of knee flexion. The findings of the present study suggest that knee stability in PCL reconstructions may be improved with the use of thicker grafts in the SB technique rather than performing the DB technique.

Thick Graft Versus Double-Bundle Technique on Posterior Cruciate Ligament Reconstruction: Experimental Biomechanical Study with Cadavers / Enxerto espesso versus técnica de duplo feixe na reconstrução do ligamento cruzado posterior: Estudo experimental biomecânico com cadáveres

Abstract Objective To evaluate the biomechanical effect of graft thickness compared with the double-bundle technique on posterior cruciate ligament (PCL) reconstruction in human cadaveric knees. Methods A total of 9 human cadaveric knees were tested in 5 conditions: intact knee (INT); single-bundle reconstruction with a 10-mm quadriceps tendon (SB); double-bundle reconstruction with a 10 mm-quadriceps tendon for the anterolateral bundle and a 7-mm doubled semitendinosus tendon for the posteromedial bundle (DB); single-bundle reconstruction with a 10-mm quadriceps tendon plus a 7-mm doubled semitendinosus tendon (SBT); and PCL-deficient (NoPCL). The posterior tibial translation (PTT) was measured in response to a 134-N posterior tibial load at 0º, 30º, 60º e 90º of knee flexion. Results The PTT values of the DB and SBT techniques were always significantly lower (better stability) than those of the SB technique. The PTT values of the SBT technique were significantly lower than those of the DB technique at 60º (p = 0.005) and 90º (p = 0.001). Conclusions Graft enlargement improves knee stability in isolated PCL reconstructions, whereas the graft division in the two-bundle technique worsens this stability at 60º and 90º of knee flexion. The findings of the present study suggest that knee stability in PCL reconstructions may be improved with the use of thicker grafts in the SB technique rather than performing the DB technique.

Resumo Objetivo Avaliar o efeito biomecânico da espessura do enxerto em comparação com a técnica do duplo feixe na reconstrução do ligamento cruzado posterior (LCP) em joelhos de cadáveres humanos. Métodos Um total de 9 joelhos de cadáveres humanos foram testados em 5 condições: joelho intacto (INT); reconstrução com um único feixe com tendão de quadríceps de 10 mm (Rec 1); reconstrução com duplo feixe com um tendão de quadríceps de 10 mm para o feixe anterolateral e um tendão duplo do semitendíneo de 7 mm para o feixe póstero-medial (Rec 2); reconstrução com um único feixe mais espesso, usando um tendão de quadríceps de 10 mm mais o tendão duplo do semitendíneo de 7 mm (Rec M); e joelho com lesão isolada do LCP (Lesionado). O limite do deslocamento posterior da tíbia (LDPT) foi medido em resposta a uma carga tibial posterior de 134 N a 0º, 30º, 60º e 90º de flexão do joelho. Resultados O LDPT das técnicas Rec 2 e Rec M foi sempre significativamente menor (melhor estabilidade) do que o LDPT da Rec 1. O LDPT da Rec M foi significativamente menor do que o LDPT da Rec 2 a 60º (p = 0,005) e a 90º (p = 0,001). Conclusões O aumento da espessura do enxerto na reconstrução das lesões isoladas do LCP melhora significativamente a estabilidade, enquanto a divisão do enxerto para reconstruir os dois feixes piora a estabilidade da reconstrução a 60º e 90º de flexão do joelho. As descobertas do presente estudo sugerem que a estabilidade da reconstrução do LCP pode ser melhorada com o uso de enxertos mais espessos em uma técnica de feixe único, em lugar da reconstrução de duplo feixe.

Laparoscopic Insertion of Various Shaped Trocars in a Porcine Model.

BACKGROUND AND OBJECTIVE: The number of laparoscopic procedures increases annually with an estimated 3% of complications, one third of them linked to Verres' needle or trocar insertion. The safety and efficacy of ports insertion during laparoscopic surgery may be related the technique but also to trocar design. This study aims to compare physical parameters of abdominal wall penetration for 5 different trocars. METHODS: Eleven pigs were studied. Five different commercially available trocars were randomically inserted at the midline. Real-time video recording of the insertions was achieved to measure the excursion of the abdominal wall and the time and distance the cutting surface of the bladed trocars was exposed inside the abdominal cavity. An especially designed hand sensor was developed and placed between the trocar and the hand of the surgeon to record force required for abdominal wall perforation. RESULTS: Greater deformations and forces occurred in nonbladed as compared to bladed trocars, and in conical trocars as compared to pyramidal pointed ones, except for peritoneum perforation. Greater distance and time of blade exposure occurred in pyramidal laminae as compared to conical. CONCLUSION: The bladed trocars have lower forces and deformations in their introduction, and should be those that cause less injury and are more suitable for first entry. Conical and pyramidal trocars with the same blade size showed similar force, deformation, time, and distance of exposed blade.

Novel animal model for Achilles tendinopathy: Controlled experimental study of serial injections of collagenase in rabbits.

Our goal was to develop a novel technique for inducing Achilles tendinopathy in animal models which more accurately represents the progressive histological and biomechanical characteristic of chronic Achilles tendinopathy in humans. In this animal research study, forty-five rabbits were randomly assigned to three groups and given bilateral Achilles injections. Low dose (LD group) (n = 18) underwent a novel technique with three low-dose (0.1mg) injections of collagenase that were separated by two weeks, the high dose group (HD) (n = 18) underwent traditional single high-dose (0.3mg) injections, and the third group were controls (n = 9). Six rabbits were sacrificed from each experimental group (LD and HD) at 10, 12 and 16 weeks. Control animals were sacrificed after 16 weeks. Histological and biomechanical properties were then compared in all three groups. At 10 weeks, Bonar score and tendon cross sectional area was highest in HD group, with impaired biomechanical properties compared to LD group. At 12 weeks, Bonar score was higher in LD group, with similar biomechanical findings when compared to HD group. After 16 weeks, Bonar score was significantly increased for both LD group (11,8±2,28) and HD group (5,6±2,51), when compared to controls (2±0,76). LD group showed more pronounced histological and biomechanical findings, including cross sectional area of the tendon, Young's modulus, yield stress and ultimate tensile strength. In conclusion, Achilles tendinopathy in animal models that were induced by serial injections of low-dose collagenase showed more pronounced histological and biomechanical findings after 16 weeks than traditional techniques, mimicking better the progressive and chronic characteristic of the tendinopathy in humans.

Early versus late repair of rotator cuff tears in rats.

BACKGROUND: In the event of a traumatic rotator cuff tear, patients are routinely advised that early surgical intervention produces an optimal repair, despite a lack of direct evidence to support this recommendation. To address this knowledge gap, massive rotator cuff tears in rats were assessed by biomechanical and bone morphometric analyses after early or late repair. METHODS: Combined supraspinatus and infraspinatus tendon tears of the left shoulder were created in 21 adult Wistar rats, which were divided into 2 groups. The tendons of the injured shoulder in the animals in group I were surgically repaired 8 weeks after the injury. Under the same anesthesia, the same injury was created on the right shoulder, which was immediately repaired. The rats from group I were euthanized 8 weeks after the repairs. No repair was performed in the rats from group II, which were euthanized 8 weeks after the injury. Tissues from both groups were harvested and biomechanically tested for supraspinatus tendon and bone morphometry analysis of the humeral head. RESULTS: All biomechanical properties were significantly increased in the early repair group compared with the late repair group. No significant differences were observed in bone morphometry of the humeral head when early and late repair groups were compared. CONCLUSION: Early surgical repair of a massive rotator cuff tear leads to improved biomechanical properties of the tissue after healing. Proximal humerus bone morphometry was unaffected by surgical repair timing.

Medial Patellofemoral Ligament, Medial Patellotibial Ligament, and Medial Patellomeniscal Ligament: Anatomic, Histologic, Radiographic, and Biomechanical Study.

PURPOSE: To describe the anatomy (quantitative macroscopic and histologic), radiographic parameters of the insertions, and biomechanical characteristics of the medial ligamentous restrictors of the patella (medial patellofemoral ligament [MPFL], medial patellotibial ligament [MPTL], and medial patellomeniscal ligament [MPML]) in cadaveric knees. Because the MPTL and the MPML are not as well known as the MPFL, they were the focus of this study. METHODS: MPFLs, MPTLs, and MPMLs from 9 knees were dissected. Histologic evaluations were conducted. Length, width, and insertion relations with anatomic references were determined. Metallic spheres were introduced into the insertion points of each ligament, and anteroposterior and lateral radiographs were taken. The distances of the insertions from the baselines were measured on radiographs. Tensile tests of the ligaments were performed. RESULTS: All the samples showed dense connective tissue characteristic of ligaments. The MPTL was inserted into the proximal tibia (13.7 mm distal to the joint line) and in the distal end of the patella (3.6 mm proximal to the distal border). The MPTL had a length of 36.4 mm and a width of 7.1 mm. The MPML was inserted into the medial meniscus and distally in the patella (5.7 mm proximal to the distal border). Per radiography, on the anteroposterior view, the tibial insertion of the MPTL was 9.4 mm distal to the joint line and in line with the medial border of the medial spine. On the lateral view, the patellar insertions of the MPTL and MPML were 4.8 and 6.6 mm proximal to its distal border, respectively. The MPTL was stiffer than the MPFL (17.0 N/mm vs 8.0 N/mm, P = .024) and showed less deformation in the maximum tensile strength (8.6 mm vs 19.3 mm, P = .005). CONCLUSIONS: The MPTL inserts into the proximal tibia and into the distal pole of the patella. The MPML inserts into the medial meniscus and into the distal pole of the patella. They present with identifiable anatomic and radiographic parameters. Grafts commonly used for ligament reconstructions should be adequate for reconstruction of the MPTL. CLINICAL RELEVANCE: The study contributes to the anatomic, radiographic, and biomechanical knowledge of the MPTL to improve the outcomes of its reconstruction.

Axial compressive strength of human vertebrae trabecular bones classified as normal, osteopenic and osteoporotic by quantitative ultrasonometry of calcaneus

Abstract Introduction Biomechanical assessment of trabecular bone microarchitecture contributes to the evaluation of fractures risk associated with osteoporosis and plays a crucial role in planning preventive strategies. One of the most widely clinical technics used for osteoporosis diagnosis by health professionals is bone dual-energy X-ray absorptiometry (DEXA). However, doubts about its accuracy motivate the introduction of congruent technical analysis such as calcaneal ultrasonometry (Quantitative Ultrasonometry - QUS). Methods Correlations between Bone Quality Index (BQI), determined by calcaneal ultrasonometry of thirty (30) individuals classified as normal, osteopenic and osteoporotic, and elastic modulus (E) and ultimate compressive strength (UCS) from axial compression tests of ninety (90) proof bodies from human vertebrae trabecular bone, which were extracted from cadavers in the twelfth thoracic region (T12), first and fourth lumbar (L1 and L4). Results Analysis of variance (ANOVA) showed significant differences for E (p = 0.001), for UCS (p = 0.0001) and BQI. Spearman's rank correlation coefficient (rho) between BQI and E (r = 0.499) and BQI and UCS (r = 0.508) were moderate. Discussion Calcaneal ultrasonometry technique allowed a moderate estimate of bone mechanical strength and fracture risk associated with osteoporosis in human vertebrae.

The biomechanical effects of graft rotation on ACL reconstruction tunnel mismatch.

PURPOSE: Bone block protrusion out of the tibial tunnel due to a relatively long graft is a common complication in anterior cruciate ligament surgical reconstruction with a patellar tendon. One possible solution is to shorten the patellar tendon graft already fixed in the femur by applying external rotation. This study aimed to evaluate the degree of shortening and biomechanical changes in porcine patellar grafts subjected to relatively higher degrees of rotation. Data obtained with rotations of 0°, 540°, 720°, and 900° were compared. METHODS: Forty patellar porcine ligaments were subjected to biomechanical tests of degree of shortening, modulus of elasticity and maximum tension in the tendon before rupture. Tests were conducted using a universal mechanical testing machine and a computerized system for acquiring strength and deformation data. RESULTS: Progressive shortening of the patellar ligament occurred with rotations of 0°, 540° and 720°. However, the degree of shortening showed no statistically significant difference as rotation increased from 720° to 900°. Decreased modulus of elasticity was observed compared with the graft rotation at 0° in all groups tested, but no statistically significant differences were observed among 540°, 720° and 900°. The maximum tension of the patellar tendon showed no change before rupture, regardless of the degree of rotation. CONCLUSIONS: Rotating the patellar tendon is an efficient method for shortening a relatively long graft; however, more biomechanical studies are necessary to recommend this technique in clinical practice owing to the resulting decrease in graft stiffness that could compromise knee stability.

Avaliação das fraturas do calcâneo tratadas cirurgicamente / Evaluation of surgically-treated fractures of the calcaneus

Objetivo:Avaliar os aspectos epidemiológicos e funcionais das fraturas de calcâneo tratadas cirurgicamente. Casuística e Método: estudo realizado entre janeiro de 2010 e dezembro 2011, pelo grupo do Pé e Tornozelo no Hospital Universitário Evangélico de Curitiba referência em atendimento em trauma. Foram avaliados 22 pacientes que apresentavam 23 fraturas de calcâneo tratadas cirurgicamente. Resultados:Constitui o estudo de 17 homens e 5 mulheres com idade média 38,6 anos. De acordo com a classificação radiográfica 17,3% eram fraturas extra-articulares, 21,7% tipo língua e 60% tipo depressão central. As fraturas foram fixadas com fio de Kirschner 39,1%, apenas parafuso 13,1%, com placa para calcâneo e parafuso 47,8%. O tempo médio de acompanhamento foi de 2,4 anos (entre 1,5 e 2,8). As complicações pré-operatórias foram observadas em 13%, sendo flictena a mais comum. A incidência de melhores resultados funcionais esteve relacionado às fraturas extra-articulares enquanto as fraturas articulares tipo depressão central foram as que apresentaram pior resultado funcional. O aspecto relacionado a bons resultados foi a restauração do ângulo de Böhler. O escore AOFAS médio do trabalho foi 76 pontos. Conclusão: A avaliação desta análise retrospectiva permite concluir que a fratura de calcâneo é mais comum em adultos em idade economicamente ativa e o mecanismo de trauma mais comum foi a queda de nível

Objective: was to evaluate the epidemiological and functional calcaneus fractures, surgically treated. Method: study between January 2010 and December 2011, the Foot and Ankle group at Evangelical Hospital in Curitiba. We evaluated 22 patients with 23 calcaneal fractures surgically treated.Results:Is 17 men and 5 women, mean age 38.6 years. According with radiological classification 17.3% were extra-articular, 21.7% tongue-type and 60% central depression type. The fractures were fixed with Kirschner wire 39.1%, 13.1% only screw, 39.1% and with calcaneus plate and screw and 47.8% cases. The mean follow-up was 2.4 years (1.5 to 2.8). The preoperative complications were observed in 13%, the most common being flictena. The incidence of better functional outcomes was related to extra-articular fractures while the central depression type showed the worst result. The aspect related to good results was the restoration of Böhler angle. The average AOFAS score was 76 points.Conclusion: The evaluation of this retrospective analysis shows that the calcaneus fracture is more common in adults of working age and the most common mechanism of injury was the level drop