Catalytic Performance in Nitroarene Reduction of Nanocatalyst Based on Noble Metal Nanoparticles Supported on Polymer/s-Layer Protein Hybrids.

We present a novel bionanocatalyst fabricated by the adsorption-reduction of metal ions on a polyurethane/S-layer protein biotemplate. The bioinspired support was obtained by the adsorption of S-layer proteins (isolated from Lentilactobacillus kefiri) on polyurethane particles. Silver and platinum nanoparticles were well-loaded on the surface of the support after the combination with metallic salts and reduction with H2 at room temperature. Transmission electron microscopy analysis revealed the strawberry-like morphology of the bionanocatalysts with a particle size, dn, of 2.39 nm for platinum and 9.60 nm for silver. Both systems catalyzed the hydrogenation of p-nitrophenol to p-aminophenol with high efficiency in water at mild conditions in the presence of NaBH4. Three different amounts of bionanocatalyst were tested, and in all cases, conversions between 97 and 99% were observed. The catalysts displayed excellent recyclability over ten cycles, and no extensive damage in their nanostructure was noted after them. The bionanocatalysts were stable during their production, storage, and use, thanks to the fact that the biosupport provides an effective driving force in the formation and stabilization of the metallic nanoparticles. The successful bioinspired production strategy and the good catalytic ability of the systems are encouraging in the search for nontoxic, simple, clean, and eco-friendly procedures for the synthesis and exploitation of nanostructures.

Biomodification of acenocoumarol by bifidobacteria.

The increased interest of consumers in probiotic foods requires a deeper knowledge on the possible interactions with drugs, because their pharmacological properties could be modified. In this context, these studies are relevant for drugs such as acenocoumarol, whose dosage must be controlled due to, among other factors, food-drug interactions. Acenocoumarol is an oral anticoagulant with a narrow therapeutic range. The aim of the present research is to evaluate, in vitro, the effect of bifidobacteria on acenocoumarol. The drug was incubated with Bifidobacterium bifidum CIDCA 5310 or Bifidobacterium adolescentis CIDCA 5317 in MRS broth at 37°C for 24 h in anaerobic conditions. The effect of incubation with sterilized spent culture supernatants (SSCS) was also evaluated. Analysis by RP-HPLC showed that both bifidobacterial strains reduced the area of the acenocoumarol peak and two new peaks were evidenced. In addition, a decrease in the intensity of the bands at 1650, 1390 and 1110/cm was observed in the FTIR spectroscopic determinations. Moreover, a new band appeared at 1720/cm. No effect on the drug was observed when incubation was performed with SSCS. The present study showed a significant change in the concentration of the anticoagulant after incubation with bifidobacteria and results are compatible with biomodification of the drug due to enzymatic activity of bifidobacteria.

Estudio de envejecimiento de poliamida de alto impacto marca Deflex® en saliva artificial comercial / Deflex® brand high impact polyamide aging study in commercial artificial saliva

Este trabajo presenta los resultados de un estudio de envejecimiento natural y acelerado en saliva artificial, de un material para uso odontológico de la marca Deflex® a base de poliamida de alto impacto, según lo establece la norma UNE EN IS0 10993-13 (2009) (AU)

is work presents the results of the study of natural and accelerated aging in artificial saliva, of a material for dental use of the brand Deflex® based on high impact polyamide, as established by the standard UNE EN IS0 10993-13 (2009) (AU)

Platinum Nanoparticles Obtained at Mild Conditions on S-Layer Protein/Polymer Particle Supports.

This work presents the synthesis of platinum nanoparticles supported on S-layer protein/polymeric particle systems, obtained by combining proteins isolated from Lactobacillus kefiri and an aqueous dispersion of acrylic particles. FTIR spectra of the protein/polymer supports did not show changes in the Amide I band of the proteins, suggesting that proteins maintained their conformation after adsorption. The SAXS spectra and DLS results are consistent with the formation of a protein corona around the polymer particles. After combining the supports with the platinum complex and subsequently reducing the combination with hydrogen at mild conditions, we obtained colloidal nanocomposite materials. In these, platinum nanoparticles with diameters around 3 nm located on the surface of the protein/polymer supports were observed by TEM. The obtained nanosystems showed catalytic activity in the reduction of p-nitrophenol with NaBH4 at room temperature with conversions of 100% for reaction times of 50 to 70 min.

Encapsulation of clay within polymer particles in a high-solids content aqueous dispersion.

By using a two-step polymerization process, it was possible to encapsulate clay platelets within polymer particles dispersed in water. First, seed polymer particles with chemically bonded clay were obtained by batch miniemulsion polymerization. Then, the clay was buried within the particles by the addition of neat monomer in a second step. The final stable dispersions can have a solids content of up to 50 wt %. Transmission electron microscopy images clearly show the presence of clay platelets inside the polymer colloids, although they are not totally exfoliated. The obtained nanocomposites showed an increase in both the storage modulus in the rubbery state and the water resistance as the clay content increases. The approach presented here might be useful for encapsulating other high-aspect ratio nanofillers.

Photophysical properties of blue - emitting silicon nanoparticles.

Silicon nanoparticles with strong blue photoluminescence were synthesized by electrochemical etching of silicon wafers and ultrasonically removed under N(2) atmosphere in organic solvents to produce colloids. Thermal treatment leads to the formation of colloidal Si particles of 3 ± 1 nm diameter, which upon excitation with 340 - 380 nm light exhibited room temperature luminescence in the range from 400 to 500 nm. The emission and the one- and two-photon excitation spectra of the particles are not sensitive to surface functionalization with methyl 2-methylprop-2-enoate. However, the derivatized particles show higher emission quantum yields in air-saturated suspensions (44%) than the underivatized particles (27%), as well as higher stability of its dispersions.FTIR and XPS spectra indicate a significant surface oxidation of the particles. The Si:O:C ratio at the surface of the derivatized particles estimated from XPS is Si(3)O(6)(C(5)O(2)H(y))(1), with y = 7 - 8. Vibronic spacing is observed in both the emission and excitation spectra. The information obtained from one-photon excitation experiments (emission and excitation spectra, photoluminescence quantum yields, luminescence decay lifetimes and anisotropy correlation lifetimes), as well as from two-photon excitation fluorescence correlation spectroscopy (brightness and diffusion coefficients) and TEM indicate that the blue-emitting particles are monodisperse and ball-shaped. Particle size clearly determines the emission and excitation spectral region, as expected from quantum confinement, but the presence and extent of Si-O species on the silicon networks seem crucial for determining the spectrum features and intensity of emission. The nanoparticles could hold great potential as quantum dots for applications as luminescence sensors in biology and environmental science.

Levels of glyphosate in surface waters, sediments and soils associated with direct sowing soybean cultivation in north pampasic region of Argentina.

Levels of glyphosate were determined in water, soil and sediment samples from a transgenic soybean cultivation area located near to tributaries streams of the Pergamino-Arrecifes system in the north of the Province of Buenos Aires, Argentina. Field work took into account both the pesticide application and the rains occurring after applications. The pesticide was analysed by HPLC-UV detection, previous derivatization with 9-fluorenylmethylchloroformate (FMOC-Cl). In addition, SoilFug multimedia model was used to analyse the environmental distribution of the pesticides. In the field, levels of glyphosate in waters ranged from 0.10 to 0.70 mg/L, while in sediments and soils values were between 0.5 and 5.0 mg/Kg. Temporal variation of glyphosate levels depended directly on the time of application and the rain events. The results obtained from the application of the model are in accordance with the values found in the field.