RESUMEN
Global water security is jeopardized by the presence of anthropogenic contaminants, which can persist resiliently in the environment and adversely affect human health. Surface adsorption of polluting species is an effective technique for water purification. In this work, redox-active magnetic compounds were designed for the targeted removal of inorganic and organic anions in water via polymeric redox-active vinylferrocene (VFc) and pyrrole (Py) moieties. An Fe3O4@SiO2@PPy@P(VFc-co-HEMA) composite was prepared in a four-step process, with the outermost layer possessing heightened hydrophilicity as a result of the optimized incorporation of 2-hydroxyethylmethacrylate (HEMA) monomers into the backbone of the ferrocene macromolecule. The synthesized materials are able to separate carcinogenic hexavalent chromium oxyanions and other charged micropollutants, and exhibit a 2-fold or greater enhancement in adsorption uptake once the redox-active ferrocene groups are oxidized to ferrocenium cations, with capacities of 23, 49, 66, and 95 mg/g VFc for maleic acid, 2-(6-methoxy-2-naphthyl)propionic acid (Naproxen), (2,4-dichlorophenoxy)acetic acid (2,4-D), and (2-dodecylbenzene)sulfonic acid (DBS), respectively, and a > 99% extractability of chromium in the 1 ppm range. The application of redox-active components to a magnetic particulate scaffold improves maneuverability and phase contact, giving rise to new potential aqueous separation process frameworks for water or product purification.
RESUMEN
Unlike crystalline atomic and ionic solids, texture development due to crystallographically preferred growth in colloidal crystals is less studied. Here we investigate the underlying mechanisms of the texture evolution in an evaporation-induced colloidal assembly process through experiments, modeling, and theoretical analysis. In this widely used approach to obtain large-area colloidal crystals, the colloidal particles are driven to the meniscus via the evaporation of a solvent or matrix precursor solution where they close-pack to form a face-centered cubic colloidal assembly. Via two-dimensional large-area crystallographic mapping, we show that the initial crystal orientation is dominated by the interaction of particles with the meniscus, resulting in the expected coalignment of the close-packed direction with the local meniscus geometry. By combining with crystal structure analysis at a single-particle level, we further reveal that, at the later stage of self-assembly, however, the colloidal crystal undergoes a gradual rotation facilitated by geometrically necessary dislocations (GNDs) and achieves a large-area uniform crystallographic orientation with the close-packed direction perpendicular to the meniscus and parallel to the growth direction. Classical slip analysis, finite element-based mechanical simulation, computational colloidal assembly modeling, and continuum theory unequivocally show that these GNDs result from the tensile stress field along the meniscus direction due to the constrained shrinkage of the colloidal crystal during drying. The generation of GNDs with specific slip systems within individual grains leads to crystallographic rotation to accommodate the mechanical stress. The mechanistic understanding reported here can be utilized to control crystallographic features of colloidal assemblies, and may provide further insights into crystallographically preferred growth in synthetic, biological, and geological crystals.
RESUMEN
The regulation of mass transfer across membranes is central to a wide spectrum of applications. Despite numerous examples of stimuli-responsive membranes for liquid-phase species, this goal remains elusive for gaseous molecules. We describe a previously unexplored gas gating mechanism driven by reversible electrochemical metal deposition/dissolution on a conductive membrane, which can continuously modulate the interfacial gas permeability over two orders of magnitude with high efficiency and short response time. The gating mechanism involves neither moving parts nor dead volume and can therefore enable various engineering processes. An electrochemically mediated carbon dioxide concentrator demonstrates proof of concept by integrating the gating membranes with redox-active sorbents, where gating effectively prevented the cross-talk between feed and product gas streams for high-efficiency, directional carbon dioxide pumping. We anticipate our concept of dynamically regulating transport at gas-liquid interfaces to broadly inspire systems in fields of gas separation, miniaturized devices, multiphase reactors, and beyond.
RESUMEN
The rising use of seawater desalination for fresh water production is driving a parallel rise in the discharge of high-salinity brine into the ocean. Better utilization of this brine would have a positive impact on the energy use, cost, and environmental footprint of desalination. Furthermore, intermittent renewable energy can easily power the brine utilization and, for reverse osmosis technology, the entire desalination plant. One pathway toward these goals is to convert the otherwise discharged brine into useful chemicals; waste could be transformed into sodium hydroxide or caustic soda (NaOH) and hydrochloric acid (HCl). In this Minireview, we discuss opportunities and challenges for integrated valorization of desalination brine through NaOH and HCl recovery.
RESUMEN
The electrochemical CO2 reduction reaction (CO2RR) has gained attention recently due to rising concern over atmospheric carbon levels, but catalyst selectivity and efficiency remain a challenge, particularly for products other than CO. Here, we report the selective formation of formate using a sulfide-derived copper (SD-Cu) catalyst for CO2RR. On the basis of in situ and postelectrolysis spectroscopy, we propose that this selectivity is due to stronger binding of the CO intermediate originating from remaining subsurface sulfur atoms.
RESUMEN
Inorganic microstructured materials are ubiquitous in nature. However, their formation in artificial self-assembly systems is challenging as it involves a complex interplay of competing forces during and after assembly. For example, colloidal assembly requires fine-tuning of factors such as the size and surface charge of the particles and electrolyte strength of the solvent to enable successful self-assembly and minimize crack formation. Co-assembly of templating colloidal particles together with a sol-gel matrix precursor material helps to release stresses that accumulate during drying and solidification, as previously shown for the formation of high-quality inverse opal (IO) films out of amorphous silica. Expanding this methodology to crystalline materials would result in microscale architectures with enhanced photonic, electronic, and catalytic properties. This work describes tailoring the crystallinity of metal oxide precursors that enable the formation of highly ordered, large-area (mm2 ) crack-free titania, zirconia, and alumina IO films. The same bioinspired approach can be applied to other crystalline materials as well as structures beyond IOs.
RESUMEN
In order to prepare lubricant-infused repellent coatings on silica nanostructures using low vapor pressure ionic liquids as lubricants, we study the wetting behavior of a set of imidazolium-based ionic liquids with different alkyl side chains as a function of the applied surface functionalities. We take advantage of the structural color of inverse opals prepared from a colloidal coassembly technique to study the infiltration of ionic liquids into these nanoporous structures. We find that the more hydrophobic ionic liquids with butyl and hexyl side chains can completely infiltrate inverse opals functionalized with mixed self-assembled monolayers composed of imidazole groups and aliphatic hydrocarbon chains, which we introduce via silane chemistry. These molecular species reflect the chemical nature of the ionic liquid, thereby increasing the affinity between the liquid and solid surface. The mixed surface chemistry provides sufficiently small contact angles with the ionic liquid to infiltrate the nanopores while maximizing the contact angle with water. As a result, the mixed monolayers enable the design of a stable ionic liquid/solid interface that is able to repel water as a test liquid. Our results underline the importance of matching chemical affinities to predict and control the wetting behavior in complex, multiphase systems.
RESUMEN
Nature evolved a variety of hierarchical structures that produce sophisticated functions. Inspired by these natural materials, colloidal self-assembly provides a convenient way to produce structures from simple building blocks with a variety of complex functions beyond those found in nature. In particular, colloid-based porous materials (CBPM) can be made from a wide variety of materials. The internal structure of CBPM also has several key attributes, namely porosity on a sub-micrometer length scale, interconnectivity of these pores, and a controllable degree of order. The combination of structure and composition allow CBPM to attain properties important for modern applications such as photonic inks, colorimetric sensors, self-cleaning surfaces, water purification systems, or batteries. This review summarizes recent developments in the field of CBPM, including principles for their design, fabrication, and applications, with a particular focus on structural features and materials' properties that enable these applications. We begin with a short introduction to the wide variety of patterns that can be generated by colloidal self-assembly and templating processes. We then discuss different applications of such structures, focusing on optics, wetting, sensing, catalysis, and electrodes. Different fields of applications require different properties, yet the modularity of the assembly process of CBPM provides a high degree of tunability and tailorability in composition and structure. We examine the significance of properties such as structure, composition, and degree of order on the materials' functions and use, as well as trends in and future directions for the development of CBPM.
Asunto(s)
Coloides/química , Tamaño de la Partícula , Porosidad , Propiedades de SuperficieRESUMEN
Materials in nature are characterized by structural order over multiple length scales have evolved for maximum performance and multifunctionality, and are often produced by self-assembly processes. A striking example of this design principle is structural coloration, where interference, diffraction, and absorption effects result in vivid colors. Mimicking this emergence of complex effects from simple building blocks is a key challenge for man-made materials. Here, we show that a simple confined self-assembly process leads to a complex hierarchical geometry that displays a variety of optical effects. Colloidal crystallization in an emulsion droplet creates micron-sized superstructures, termed photonic balls. The curvature imposed by the emulsion droplet leads to frustrated crystallization. We observe spherical colloidal crystals with ordered, crystalline layers and a disordered core. This geometry produces multiple optical effects. The ordered layers give rise to structural color from Bragg diffraction with limited angular dependence and unusual transmission due to the curved nature of the individual crystals. The disordered core contributes nonresonant scattering that induces a macroscopically whitish appearance, which we mitigate by incorporating absorbing gold nanoparticles that suppress scattering and macroscopically purify the color. With increasing size of the constituent colloidal particles, grating diffraction effects dominate, which result from order along the crystal's curved surface and induce a vivid polychromatic appearance. The control of multiple optical effects induced by the hierarchical morphology in photonic balls paves the way to use them as building blocks for complex optical assemblies--potentially as more efficient mimics of structural color as it occurs in nature.
RESUMEN
We present a simple one-pot co-assembly method for the synthesis of hierarchically structured pigment particles consisting of silica inverse-opal bricks that are doped with plasmonic absorbers. We study the interplay between the plasmonic and photonic resonances and their effect on the visual appearance of macroscopic collections of photonic bricks that are distributed in randomized orientations. Manipulating the pore geometry tunes the wavelength- and angle-dependence of the scattering profile, which can be engineered to produce angle-dependent Bragg resonances that can either enhance or contrast with the color produced by the plasmonic absorber. By controlling the overall dimensions of the photonic bricks and their aspect ratios, their preferential alignment can either be encouraged or suppressed. This causes the Bragg resonance to appear either as uniform color travel in the former case or as sparse iridescent sparkle in the latter case. By manipulating the surface chemistry of these photonic bricks, which introduces a fourth length-scale (molecular) of independent tuning into our design, we can further engineer interactions between liquids and the pores. This allows the structural color to be maintained in oil-based formulations, and enables the creation of dynamic liquid-responsive images from the pigment.
Asunto(s)
Colorantes/análisis , Nanoestructuras/química , Fotones , Dióxido de Silicio/química , ColorRESUMEN
Porous materials display interesting transport phenomena due to restricted motion of fluids within the nano- to microscale voids. Here, we investigate how liquid wetting in highly ordered inverse opals is affected by anisotropy in pore geometry. We compare samples with different degrees of pore asphericity and find different wetting patterns depending on the pore shape. Highly anisotropic structures are infiltrated more easily than their isotropic counterparts. Further, the wetting of anisotropic inverse opals is directional, with liquids filling from the side more easily. This effect is supported by percolation simulations as well as direct observations of wetting using time-resolved optical microscopy.
Asunto(s)
Anisotropía , Humectabilidad , PorosidadRESUMEN
The photofragmentation of butyrophenone yields benzoate and a propyl radical on oxidized TiO2(110). Oxygen dissociates in native oxygen vacancies to produce reactive oxygen adatoms which react with butyrophenone to create photoactive butyrophenone-O complexes that are sensitive to hole oxidation created upon UV illumination. The same O adatoms also trap one of the primary photoproducts, phenyl-CO, to produce benzoate. The reaction proceeds via a Norrish Type I like process involving α-CC cleavage on the surface, in contrast to the gas phase where a Norrish Type II pathway predominates. The mechanism is probed using mass spectrometry and, for the first time, scanning tunneling microscopy (STM). Our STM experiments show that there is a 1-to-1 correspondence between the immobile butyrophenone-O complex and formation of a benzoate on the surface. We also demonstrate that the benzoate species is in close proximity to the original butyrophenone complex, indicating that benzoate is produced on a time scale more rapid than diffusion of the photoproducts. While the photoproducts of butyrophenone decomposition are similar to ketone oxidation reported previously, butyrophenone reacts via a different starting ground state, based on STM and density functional theory studies. Specifically, butyrophenone does not produce a dioxyalkylene species, which has been proposed to be the photoactive state for other ketones. Based on a combination of STM experiments and density functional theory, we propose that a peroxy-like configuration where the oxygen adatom stabilizes the butyrophenone through its carbonyl oxygen is the surface intermediate that photodecomposes. These results demonstrate the importance of the excited state in determining the photochemistry of ketones on surfaces.
Asunto(s)
Butirofenonas/química , Titanio/química , Benzoatos/síntesis química , Benzoatos/química , Modelos Moleculares , Oxidación-Reducción , Oxígeno/química , Procesos Fotoquímicos , Propiedades de Superficie , TemperaturaRESUMEN
Methyl formate is produced from the photo-oxidation of methanol on preoxidized TiO(2)(110). We demonstrate that two consecutive photo-oxidation steps lead to methyl formate using mass spectrometry and scanning tunneling microscopy. The first step in methanol oxidation is formation of methoxy by the thermal dissociation of the O-H bond to yield adsorbed CH(3)O and water. Formaldehyde is produced via hole-mediated oxidation of adsorbed methoxy in the first photochemical step. Next, transient HCO is made photochemically from formaldehyde. The HCO couples with residual methoxy on the surface to yield methyl formate. Exposure of the titania surface to O(2) is required for these photo-oxidation steps in order to heal surface and near-surface defects that can serve as hole traps. Notably, residual O adatoms are not required for photochemical production of methyl formate or formaldehyde. All O adatoms react thermally with methanol to form methoxy and gaseous water at rt, leaving a surface devoid of O adatoms. The mechanism provides insight into the photochemistry of TiO(2) and suggests general synthetic pathways that are the result of the ability to activate both alkoxides and aldehydes using photons.