RESUMEN
The synthesis and characterization of two bis(dithiolene) proligands involving heteroatomic linkers such as 1,4-dithiine and dihydro-1,4-disiline between the two protected dithiolene moieties are described. Two bimetallic complexes involving these heteroatomic bridges between two redox active bis(cyclopentadienyl)molybdenum dithiolene moieties have been synthesized and characterized by electrochemistry, spectroelectrochemistry, and their properties rationalized with (TD-)DFT. Cyclic voltammetry experiments show sequential oxidation of the two redox centers with ΔE values between successive one-electron transfers varying according to the nature of the bridge. Depending on the nature of the heteroatomic bridge, the bis-oxidized complexes exhibit either a diradical character with both radicals essentially localized on the metallacycles, or a closed-shell dicationic state.
RESUMEN
Chalcogenide glasses in the Na2S-GeS2-Ga2S3 pseudoternary system were synthesized using a combination route of melt-quenching and mechanical-milling methods. First, a glass rich in germanium (90GeS2-10Ga2S3) is synthesized by melt-quenching synthesis in a silica tube sealed under vacuum. This glass is used as a precursor for the second step of mechanochemistry to explore the Na2S-GeS2-Ga2S3 pseudoternary system. By using this synthesis route, the glass-forming ability is improved as the vitreous domain is enlarged, especially for Na- and Ga-rich compositions. The as-obtained amorphous powders are characterized by Raman spectroscopy, differential scanning calorimetry, X-ray total scattering, and pair distribution function (PDF) analysis. The evolution of the Raman features observed is reproduced using density functional theory calculations. Impedance spectroscopy was performed to determine the conductivity of the new glasses. The addition of germanium sulfide to the Na2S-Ga2S3 pseudobinary system enables one to increase the conductivity by 1 order of magnitude. The highest room-temperature ionic conductivity, as measured by impedance spectroscopy, is 1.8 × 10-5 S·cm-1.
RESUMEN
We here present how rebalancing the interplay between H-bonds and dispersive forces (Van der Waals/π-π stacking) may induce or not the generation of kinetic metastable states. In particular, we show that extending the aromatic content and favouring the interchain VdW interactions causes a delay into the cooperative supramolecular polymerization of a new family of toluene bis-amide derivatives by trapping the metastable inactive state.
RESUMEN
Benzene-1,2,4,5-tetrathiolate (btt) has been used as a bridging ligand to prepare a redox active (molybdenocene dithiolene)-based bimetallic complex Cp2 Mo(btt)MoCp2 , which exhibits four successive electron transfers up to the tetracation. Spectro-electrochemical investigations together with DFT and TD-DFT calculations evidence that the two electroactive MoS2 C2 metallacycles are electronically coupled in the monocationic as in the dicationic state. Two salts of the dication [Cp2 Mo(btt)MoCp2 ]2+ have been structurally characterized with PF6 - and HSO4 - counterions, showing different chair or boat conformations associated with variable folding angles of the two MoS2 C2 metallacycles along the S-S hinge. The bis-oxidized dicationic complex exhibits a diradical character, with both radicals essentially localized on the metallacycles and with antiferromagnetic coupling evidenced from magnetic susceptibility measurements.
RESUMEN
Photochromic molecules are widely studied and developed for their many potential applications. To optimize the required properties through theoretical models, a considerable chemical space is to be explored, and their environment in devices is to be accounted for.. To this end, cheap and reliable computational methods can be powerful tools to steer synthetic developments. As ab initio methods remain costly for extensive studies (in terms of the size of the system and/or number of molecules), semiempirical methods such as density functional tight-binding (TB) could offer a good compromise between accuracy computational cost. However, these approaches necessitate benchmarking on the families of compounds of interest. Thus, the aim of the present study is to evaluate the accuracy of several key features calculated with TB methods (DFTB2, DFTB3, GFN2-xTB, and LC-DFTB2) for three sets of photochromic organic molecules: azobenzene (AZO), norbornadiene/quadricyclane (NBD/QC), and dithienylethene (DTE) derivatives. The features considered here are the optimized geometries, the difference in energy between the two isomers (ΔE), and of the energies of the first relevant excited states. All the TB results are compared to those obtained with DFT methods and state-of-the-art electronic structure calculation methods: DLPNO-CCSD(T) for ground states and DLPNO-STEOM-CCSD for excited states. Our results show that, overall, DFTB3 is the TB method leading to the best results for the geometries and the ΔE values and can be used alone for these purposes for NBD/QC and DTE derivatives. Single point calculations at the r2SCAN-3c level using TB geometries allow circumventing the deficiencies of the TB methods in the AZO series. For electronic transition calculations, the range separated LC-DFTB2 method is the most accurate TB method tested for AZO and NBD/QC derivatives, in close agreement with the reference.
RESUMEN
In this work, we present a quantum mechanics/molecular mechanics (QM/MM) approach for the computation of solid-state nuclear magnetic resonance (SS-NMR) shielding constants (SCs) for molecular crystals. Besides applying standard-DFT functionals like GGAs (PBE), meta-GGAs (TPSS), and hybrids (B3LYP), we apply a double-hybrid (DSD-PBEP86) functional as well as MP2, using the domain-based local pair natural orbital (DLPNO) formalism, to calculate the NMR SCs of six amino acid crystals. All the electronic structure methods used exhibit good correlation of the NMR shieldings with respect to experimental chemical shifts for both 1H and 13C. We also find that local electronic structure is much more important than the long-range electrostatic effects for these systems, implying that cluster approaches using all-electron/Gaussian basis set methods might offer great potential for predictive computations of solid-state NMR parameters for organic solids.
Asunto(s)
Aminoácidos , Electrónica , Espectroscopía de Resonancia Magnética , Modelos Moleculares , Electricidad EstáticaRESUMEN
Buckyballs (fullerenes) were first reported over 30â years ago, but still little is known regarding their natural occurrence, since they have so far only been found at sites of high-energy incidents, such as lightning strikes or meteor impacts, but have not been reported in low-energy materials like fossil fuels. Using ultrahigh-resolution mass spectrometry, a wide range of fullerenes from C30 to C114 was detected in the asphaltene fraction of a heavy crude oil, together with their building blocks of C10n H10 stoichiometry. High-level DLPNO-CCSD(T) calculations corroborate their stability as spherical and hemispherical species. Interestingly, the maximum intensity of the fullerenes was found at C40 instead of the major fullerene C60 . Hence, experimental evidence supported by calculations show the existence of not only buckyballs but also buckybowls as 3-dimensional polyaromatic compounds in fossil materials.
RESUMEN
Direct selective oxidation of hydrocarbons to oxygenates by O2 is challenging. Catalysts are limited by the low activity and narrow application scope, and the main focus is on active C-H bonds at benzylic positions. In this work, stable, lead-free, Cs3 Bi2 Br9 halide perovskites are integrated within the pore channels of mesoporous SBA-15 silica and demonstrate their photocatalytic potentials for C-H bond activation. The composite photocatalysts can effectively oxidize hydrocarbons (C5 to C16 including aromatic and aliphatic alkanes) with a conversion rate up to 32900â µmol gcat -1 h-1 and excellent selectivity (>99 %) towards aldehydes and ketones under visible-light irradiation. Isotopic labeling, inâ situ spectroscopic studies, and DFT calculations reveal that well-dispersed small perovskite nanoparticles (2-5â nm) possess enhanced electron-hole separation and a close contact with hydrocarbons that facilitates C(sp3 )-H bond activation by photoinduced charges.
RESUMEN
High Resolution Transmission Electron Microscopy (HR TEM) is used to identify the size, shape, and interface structure of platinum nanoparticles and carbon support of a fuel cell catalyst. Using these insights, models accessible to quantum chemical methods are designed in order to rationalize the observed features. Thus, basal plane and prism face models of the carbon black material are considered, interacting with Pt clusters of sizes up to 1 nm. Particular attention is paid to the electronic structure of the carbon support, namely, the radical character of graphene zig-zag edges. The results show that a stronger interaction is found when the nanoparticle is at the zig-zag edge of a basal plane due to the combination of dispersion interaction with the support structure and covalent interaction with carbon atoms at the edge. In this case, a distortion of both the Pt nanoparticle and the carbon support is observed, which corresponds to the observations from the HR TEM investigation. Furthermore, the analysis of the charge transfer upon interaction and the influence of the potential on the charge states and structure is carried out on our model systems. In all cases, a clear charge transfer is observed from the carbon support to the Pt nanoparticle. Finally, we show that changing the potential not only can change the charge state of the system but can also affect the nature of the interaction between Pt nanoparticles and carbon supports.
RESUMEN
A ring carbo-mer of naphthalene, C32 Ar8 (Ar=p-n-pentylphenyl), has been obtained as a stable blue chromophore, after a 19-step synthetic route involving methods inspired from those used in the synthesis of carbo-benzenes, or specifically devised for the present target, like a double Sonogashira-type coupling reaction. The last step is a SnCl2 /HCl-mediated reduction of a decaoxy-carbo-decalin, which is prepared through successive [8+10] macrocyclization steps. Two carbo-benzene references are also described, C18 Ar6 and o-C18 Ar4 (C≡C-SiiPr3 )2 . The carbo-naphthalene bicycle is locally aromatic according to structural and magnetic criteria, as revealed by strong diatropic ring current effects on the deshielding of 1 H nuclei of the Ar groups and on the negative value of the DFT-calculated NICS at the center of the C18 rings (-12.8â ppm). The stability and aromaticity of this smallest fused molecular fragment of α-graphyne allows prediction of the same properties for the carbon allotrope itself.
RESUMEN
The optical properties of several quadrupolar carbo-benzene derivatives are investigated at various levels of calculation (TDDFT and CASPT2) and analyzed using a new theoretical tool here disclosed: The "visualization" of the transition dipole moment from the transition density truncated to the main monoexcitations involved in the electronic transition (TTD). The experimental or calculated one-photon UV-visible absorption spectra of the carbo-benzene derivatives fit with the Gouterman model originally proposed for porphyrins, where the first four excited states involve linear combinations of monoexcitations of the same four frontier molecular orbitals. The relative intensities of the absorption bands are analyzed from the transition dipole moments calculated from the TTDs and an analogy between porphyrins and carbo-benzenes is argued. The two-photon absorption (TPA) cross section related to the third-order nonlinear optical response is calculated for each two-photon-allowed excited state |f⟩ from the contribution of all possible intermediate excited states |i⟩ using the "sum-over-state" (SOS) scheme. The quadrupolar carbo-benzene derivatives fit into the three-level model, as their TPA cross section exhibits a dominant contribution of one of the intermediate excited states. The origin of TPA efficiency (enhancement) upon carbo-merisation of the C-C link to the para-substituents is discussed from the excitation energies of the intermediate and final excited states and from the two corresponding transition dipole moments (µ0i and µif). The latter may be calculated from the TTDs.
RESUMEN
Numerous studies have underlined the putative diradical character of π-conjugated molecules that can be described by closed-shell Lewis structures, for instance, p-dimethylene p-n phenylenes, or long polyacenes. In the latter compounds, the only way to save the aromaticity of the six-membered rings is to give up the Lewis electron pairing in the singlet biradical ground state. The present work considers the possibility of doing the same by using the basic C2 units of carbo-meric architectures. A series of acyclic and cyclic carbo-meric architectures is studied by using UB3LYP DFT broken-symmetry calculations, including spin decontaminations and subsequent geometry optimization of the singlet diradical. The C2 units are shown to stabilize the singlet biradical by spin delocalization, two of them playing approximately the same role as one radical-insulating 1,4 phenylene moiety. The results are generalized to the investigation of open-shell polyradical singlet states of rigid hydrocarbon structures, the symmetry and rigidity of which can assist cooperativity and self spin polarization effect. Several synthesis targets with challenging magnetic/spin properties are suggested in the carbo-mer series.
RESUMEN
The synthesis, crystal and electronic structures, and one- and two-photon absorption properties of two quadrupolar fluorenyl-substituted tetraphenyl carbo-benzenes are described. These all-hydrocarbon chromophores, differing in the nature of the linkers between the fluorenyl substituents and the carbo-benzene core (C-C bonds for 3 a, C-C=C-C expanders for 3 b), exhibit quasi-superimposable one-photon absorption (1PA) spectra but different two-photon absorption (2PA) cross-sections σ2PA. Z-scan measurements (under NIR femtosecond excitation) indeed showed that the C≡C expansion results in an approximately twofold increase in the σ2PA value, from 336 to 656â GM (1â GM = 10(-50)â cm(4) s molecule(-1) photon(-1)) at λ = 800â nm. The first excited states of Au and Ag symmetry accounting for 1PA and 2PA, respectively, were calculated at the TDDFT level of theory and used for sum-over-state estimations of σ2PA(λi), in which λi = 2 hc/Ei, h is Planck's constant, c is the speed of light, and Ei is the energy of the 2PA-allowed transition. The calculated σ2PA values of 227â GM at 687â nm for 3 a and 349â GM at 708â nm for 3 b are in agreement with the Z-scan results.
RESUMEN
The carbo-mer of the para-quinodimethane core is stable within in a bis(9-fluorenylidene) derivative. Oxidation of this carbo-quinoid with MnO2 in the presence of SnCl2 and ethanol affords the corresponding p-bis(9-ethoxy-fluoren-9-yl)-carbo-benzene. The latter can be in turn converted back into the carbo-quinoid by reduction with SnCl2 , thus evidencing a chemical reversibility of the interconversion between a pro-aromatic carbo-quinoid and an aromatic carbo-benzene, and is reminiscent of the behavior of the benzoquinone/hydroquinone redox couple (in the red-ox opposite sense).