Polymorphism of pyrene on compression to 35 GPa in a diamond anvil cell.

Structural studies of pyrene have been limited to below 2 GPa. Here, we report on investigations of pyrene up to ~35 GPa using in situ single-crystal synchrotron X-ray diffraction in diamond anvil cells and ab initio calculations. They reveal the phase transitions from pyrene-I to pyrene-II (0.7 GPa), and to the previously unreported pyrene-IV (2.7 GPa), and pyrene-V (7.3 GPa). The structure and bonding analysis shows that gradual compression results in continuous compaction of molecular packing, eventually leading to curvature of molecules, which has never been observed before. Large organic molecules exhibit unexpectedly high conformational flexibility preserving pyrene-V up to 35 GPa. Ab initio calculations suggest that the phases we found are thermodynamically metastable compared to pyrene-III previously reported at 0.3 and 0.5 GPa. Our study contributes to the fundamental understanding of the polymorphism of polycyclic aromatic hydrocarbons and calls for further theoretical exploration of their structure-property relationships.

Melting Curve of Black Phosphorus: Evidence for a Solid-Liquid-Liquid Triple Point.

Black phosphorus (bP) is a crystalline material that can be seen as an ordered stacking of two-dimensional layers, which results in outstanding anisotropic physical properties. The knowledge of its pressure (P)-temperature (T) phase diagram, and in particular, of its melting curve is fundamental for a better understanding of the synthesis and stability conditions of this element. Despite the numerous studies devoted to this subject, significant uncertainties remain regarding the determination of the position and slope of its melting curve. Here we measured the melting curve of bP in an extended P, T region from 0.10(3) to 5.05(40) GPa and from 914(25) to 1788(70) K, using in situ high-pressure and high-temperature synchrotron X-ray diffraction. We employed an original metrology based on the anisotropic thermoelastic properties of bP to accurately determine P and T. We observed a monotonic increase of the melting temperature with pressure and the existence of two distinct linear regimes below and above 1.35(15) GPa, with respective slopes of 348 ± 21 and of 105 ± 12 K·GPa-1. These correspond to the melting of bP toward the low-density liquid and the high-density liquid, respectively. The triple point at which solid bP and the two liquids meet is located at 1.35(15) GPa and 1350(25) K. In addition, we have characterized the solid phases after crystallization of the two liquids and found that, while the high-density liquid transforms back to solid bP, the low-density liquid crystallizes into a more complex, partly crystalline and partly amorphous solid. The X-ray diffraction pattern of the crystalline component could be indexed as a mixture of red and violet P.

Structure-property relationship of a complex photoluminescent arylacetylide-gold(I) compound. I: a pressure-induced phase transformation caught in the act.

A pressure-induced triclinic-to-monoclinic phase transition has been caught `in the act' over a wider series of high-pressure synchrotron diffraction experiments conducted on a large, photoluminescent organo-gold(I) compound. Here, we describe the mechanism of this single-crystal-to-single-crystal phase transition, the onset of which occurs at ∼0.6 GPa, and we report a high-quality structure of the new monoclinic phase, refined using aspherical atomic scattering factors. Our case illustrates how conducting a fast series of diffraction experiments, enabled by modern equipment at synchrotron facilities, can lead to overestimation of the actual pressure of a phase transition due to slow transformation kinetics.

Anisotropic thermo-mechanical response of layered hexagonal boron nitride and black phosphorus: application as a simultaneous pressure and temperature sensor.

Hexagonal boron nitride (hBN) and black phosphorus (bP) are crystalline materials that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. Knowledge of the thermal equations of state of hBN and bP is of great interest in the field of 2D materials for a better understanding of their anisotropic thermo-mechanical properties and exfoliation mechanism towards the preparation of important single-layer materials like hexagonal boron nitride nanosheets and phosphorene. Despite several theoretical and experimental studies, important uncertainties remain in the determination of the thermoelastic parameters of hBN and bP. Here, we report accurate thermal expansion and compressibility measurements along the individual crystallographic axes, using in situ high-temperature and high-pressure high-resolution synchrotron X-ray diffraction. In particular, we have quantitatively determined the subtle variations of the in-plane and volumetric thermal expansion coefficients and compressibility parameters by subjecting these materials to hydrostatic conditions and by collecting a large number of data points in small pressure and temperature increments. In addition, based on the anisotropic behavior of bP, we propose the use of this material as a sensor for the simultaneous determination of pressure and temperature in the range of 0-5 GPa and 298-1700 K, respectively.

Pressure stabilization effect on the donor-acceptor polyiodide chains in tetraethylammonium bis(diiodine) triiodide - insights from Raman spectroscopy.

Polyiodides present high bonding flexibility already at ambient conditions, and undergo significant pressure-induced structural deformations. Resonant Raman spectroscopy has been widely used to study I-I bonds in various polyiodides, but it carries a risk of photodecomposition due to the high visible-light absorption of iodine. In this study, tetraethylammonium (bis)diiodine triiodide (TEAI) has been investigated by resonant Raman spectroscopy up to 12.02(3) GPa. The effect of pressure on the intensities and positions of Raman bands has been evaluated and correlated with the interatomic I-I distances derived from high-pressure X-ray diffraction experiments. Pressure was shown to effectively stabilize TEAI against laser-induced photodecomposition, even after a long course of irradiation with the resonant laser light. Examination of a freshly exposed crystal surface revealed that TEAI superficially passivates with the layer of lower polyiodides, which prevents further iodine loss, and shows distinct pressure-induced behaviour.

Simple Molecules under High-Pressure and High-Temperature Conditions: Synthesis and Characterization of α- and ß-C(NH)2 with Fully sp3 -Hybridized Carbon.

The elements hydrogen, carbon, and nitrogen are among the most abundant in the solar system. Still, little is known about the ternary compounds these elements can form under the high-pressure and high-temperature conditions found in the outer planets' interiors. These materials are also of significant research interest since they are predicted to feature many desirable properties such as high thermal conductivity and hardness due to strong covalent bonding networks. In this study, the high-pressure high-temperature reaction behavior of malononitrile H2 C(CN)2 , dicyandiamide (H2 N)2 C=NCN, and melamine (C3 N3 )(NH2 )3 was investigated in laser-heated diamond anvil cells. Two previously unknown compounds, namely α-C(NH)2 and ß-C(NH)2 , have been synthesized and found to have fully sp3 -hybridized carbon atoms. α-C(NH)2 crystallizes in a distorted ß-cristobalite structure, while ß-C(NH)2 is built from previously unknown imide-bridged 2,4,6,8,9,10-hexaazaadamantane units, which form two independent interpenetrating diamond-like networks. Their stability domains and compressibility were studied, for which supporting density functional theory calculations were performed.

High-pressure and high-temperature synthesis of crystalline Sb3 N5.

A chemical reaction between Sb and N2 was induced under high-pressure (32-35 GPa) and high-temperature (1600-2200 K) conditions, generated by a laser heated diamond anvil cell. The reaction product was identified by single crystal synchrotron X-ray diffraction at 35 GPa and room temperature as crystalline antimony nitride with Sb3 N5 stoichiometry and structure belonging to orthorhombic space group Cmc21 . Only Sb-N bonds are present in the covalent bonding framework, with two types of Sb atoms respectively forming SbN6 distorted octahedra and trigonal prisms and three types of N atoms forming NSb4 distorted tetrahedra and NSb3 trigonal pyramids. Taking into account two longer Sb-N distances, the SbN6 trigonal prisms can be depicted as SbN8 square antiprisms and the NSb3 trigonal pyramids as NSb4 distorted tetrahedra. The Sb3 N5 structure can be described as an ordered stacking in the bc plane of bi- layers of SbN6 octahedra alternated to monolayers of SbN6 trigonal prisms (SbN8 square antiprisms). The discovery of Sb3 N5 finally represents the long sought-after experimental evidence for Sb to form a crystalline nitride, providing new insights about fundamental aspects of pnictogens chemistry and opening new perspectives for the high-pressure chemistry of pnictogen nitrides and the synthesis of an entire class of new materials.

Pressure-freezing of dodecane: exploring the crystal structures, formation kinetics and phase diagrams for colossal barocaloric effects in n-alkanes.

Barocaloric (BC) materials provide cheaper and more energy efficient alternatives to traditional refrigerants. Some liquid alkanes were recently shown to exhibit a colossal BC effect, matching the entropy changes in commercial vapour-liquid refrigerants. Dodecane was predicted to have the largest entropy change among the studied alkanes. Using synchrotron powder and single-crystal X-ray diffraction, Raman spectroscopy, and lattice energy calculations, we investigated the BC effects of n-dodecane at high pressures and room temperature. Remarkably, a colossal entropy change |ΔS| of 778 J kg-1 K-1 at 0.15(3) GPa and 295 K was observed. Spectroscopic studies revealed that this entropy change correlates closely with the conformational transition from mixed gauche to all-trans forms during pressure-induced crystallization. Additionally, the usage of a diamond anvil cell allowed the determination of the crystal structures of in situ crystallized n-un- and dodecane, as well as evaluation of the pressure-dependent crystal growth kinetics. Furthermore, our research suggests that the entropy change (per kilogram) upon compression should be similar for all n-alkanes within the range of 9-18 carbon atoms in the molecule, based on their lattice energies. Even-numbered alkanes are predicted to exhibit superior BC properties compared to their odd-numbered counterparts due to the more symmetric crystal structures and lower propensity to form plastic phases with lower transition entropy.

Locating Guest Molecules inside Metal-Organic Framework Pores with a Multilevel Computational Approach.

Molecular docking has traditionally mostly been employed in the field of protein-ligand binding. Here, we extend this method, in combination with DFT-level geometry optimizations, to locate guest molecules inside the pores of metal-organic frameworks. The position and nature of the guest molecules tune the physicochemical properties of the host-guest systems. Therefore, it is essential to be able to reliably locate them to rationally enhance the performance of the known metal-organic frameworks and facilitate new material discovery. The results obtained with this approach are compared to experimental data. We show that the presented method can, in general, accurately locate adsorption sites and structures of the host-guest complexes. We therefore propose our approach as a computational alternative when no experimental structures of guest-loaded MOFs are available. Additional information on the adsorption strength in the studied host-guest systems emerges from the computed interaction energies. Our findings provide the basis for other computational studies on MOF-guest systems and contribute to a better understanding of the structure-interaction-property interplay associated with them.

Tracking structural phase transitions via single crystal x-ray diffraction at extreme conditions: advantages of extremely brilliant source.

Highly brilliant synchrotron source is indispensable to track pressure-induced phenomena in confined crystalline samples in megabar range. In this article, a number of experimental variables affecting the quality high-pressure single-crystal x-ray diffraction data is discussed. An overview of the recent advancements in x-ray diffraction techniques at extreme conditions, in the frame of European Synchrotron Radiation Facility (ESRF)- Extremely Bright Source (EBS), is presented. Particularly, ID15b and ID27 beamlines have profited from the source upgrade, allowing for measurements of a few-micron crystals in megabar range. In case of ID27, a whole new beamline has been devised, including installation of double-multilayer mirrors and double crystal monochromator and construction of custom-made experimental stations. Two case studies from ID27 and ID15b are presented. Hypervalent CsI3crystals, studied up to 24 GPa, have shown a series of phase transitions:Pnma → P-3c1→ Pm-3n. First transition leads to formation of orthogonal linear iodine chains made of I3-. Transformation to the cubic phase at around 21.7 GPa leads to equalization of interatomic I-I distances and formation of homoleptic Inm-chains. The second study investigates elastic properties and structure of jadarite, which undergoes isosymmetric phase transition around 16.6 GPa. Despite a few-micron crystal size, twinning and dramatic loss of crystal quality, associated with pressure-induced phase transitions, crystal structures of both compounds have been determined in a straightforward matter, thanks to the recent developments within ESRF-EBS.