RESUMEN
The incorporation of superhydrophobic properties into metal organic framework (MOF) materials is highly desirable to enhance their hydrolytic stability, gas capture selectivity in the presence of humidity and efficiency in oil-water separations, among others. The existing strategies for inducing superhydrophobicity into MOFs have several weaknesses, such as increased cost, utilization of toxic reagents and solvents, applicability for limited MOFs, etc. Here, we report the simplest, most eco-friendly, and cost-effective process to impart superhydrophobicity to MOFs, involving a rapid (90 min) treatment of MOF materials with solutions of sodium oleate, a main component of soap. The method can be applied to both hydrolytically stable and unstable MOFs, with the porosity of modified MOFs approaching, in most cases, that of the pristine materials. Interestingly, this approach was used to isolate superhydrophobic magnetic MOF composites, and one of these materials formed stable liquid marbles, whose motion could be easily guided using an external magnetic field. We also successfully fabricated superhydrophobic MOF-coated cotton fabric and fiber composites. These composites exhibited exceptional oil sorption properties achieving rapid removal of floating crude oil from water, as well as efficient purification of oil-in-water emulsions. They are also regenerable and reusable for multiple sorption processes. Overall, the results described here pave the way for an unprecedented expansion of the family of MOF-based superhydrophobic materials, as virtually any MOF could be converted into a superhydrophobic compound by applying the new synthetic approach.
RESUMEN
Metal sulfide ion exchange materials (MSIEs) are of interest for nuclear waste remediation applications. We report the high stability of two structurally related metal sulfide ion exchange materials, Na2xMg2y-xSn4-yS8 (Mg-NMS) and Na2SnS3 (Na-NMS), in strongly acid media, in addition to the preparation of Na2xNi2y-xSn4-yS8 (Ni-NMS). Their formation progress during synthesis is studied with in-situ methods, with the target phases appearing in <15 min, reaction completion in <12 h, and high yields (75-80%). Upon contact with nitric or hydrochloric acid, these materials topotactically exchange Na+ for H+, proceeding in a stepwise protonation pathway for Na5.33Sn2.67S8. Na-NMS is stable in 2 M HNO3 and Mg-NMS is stable in 4 M HNO3 for up to 4 h, while both NMS materials are stable in 6 M HCl for up to 4 days. However, the treatment of Mg-NMS and Na-NMS with 2-6 M H2SO4 reveals a much slower protonation process since after 4 h of contact both NMS and HMS are present in the solution. The resultant protonated materials, H2xMg2y-xSn4-yS8 and H4x[(HyNay-1)1.33xSn4--1.33x]S8, are themselves solid acids and readily react with and intercalate a variety of organic amines, where the band gap of the resultant adduct is influenced by amine choice and can be tuned within the range of 1.88(5)-2.27(5) eV. The work function energy values for all materials were extracted from photoemission yield spectroscopy in air (PYSA) measurements and range from 5.47 (2) to 5.76 (2) eV, and the relative band alignments of the materials are discussed. DFT calculations suggest that the electronic structure of Na2MgSn3S8 and H2MgSn3S8 makes them indirect gap semiconductors with multi-valley band edges, with carriers confined to the [MgSn3S8]2- layers. Light electron effective masses indicate high electron mobilities.
RESUMEN
Environmental pollution has been a reality for many decades, with its contamination intensifying daily due to rapid urbanization and the ever-increasing world population. Dyes, and especially synthetic ones, constitute a category of pollutants that not only affect the quality of water but also exhibit high toxicity toward living organisms. This study was thoroughly planned to explore the removal of two toxic dyes, namely the methylene blue (MB) and methyl orange (MO) compounds from contaminated aqueous media. For this purpose, we designed and synthesized two new composite materials based on ammonium-functionalized Zr4+ MOF (MOR-1 or UiO-66-NH3+) and naturally occurring sorbents, such as bentonite and clinoptilolite. The composite materials displayed exceptional sorption capability toward both MB+ and MO- ions. A key finding of this study was the high efficiency of the composite materials to simultaneously remove MB+ and MO- under continuous flow conditions, also showing regeneration capability and reusability, thus providing an alternative to well-known mixed bed resins.
RESUMEN
In the present study we provide the sorption properties of four 8-connected Zr4+ MOFs with the general formula H16[Zr6O16(RNH-BDC)4]·solvent (RNH-BDC2- = 2-alkyl-amine-terephthalate; R = ethyl-, ET-MOF; R = propyl-, PROP-MOF; R = isobutyl-, SBUT-MOF; R = n-butyl, BUT-MOF) towards toxic Cr(VI) and radionuclide-related ReO4- oxoanions. These MOFs represent superior sorbents for the removal of oxoanionic species, in terms of kinetics, sorption isotherms, selectivity and regeneration/reusability. The excellent sorption capability of the MOFs is due to a combination of surface and intra-framework sorption phenomena. The latter process proceeds via replacement of terminal water/hydroxyl ligands from the Zr6 clusters and subsequent binding of oxonanions to the Zr4+ centers, a fact that was proved via Rietveld PXRD analysis for the anion-loaded BUT-MOF. Importantly, BUT-MOF demonstrated an exceptional sorption capacity for Cr2O72- (505 mg g-1) and was further utilized in a sorption column in the form of MOF/calcium alginate beads, displaying remarkable removal efficiency towards industrial (chrome-plating) wastewater. Furthermore, the luminescence Cr(VI) sensing properties of BUT-MOF were explored in detail, presenting high sensitivity (detection limits as low as 9 ppb) and selectivity for these species against various competitive anions.
Asunto(s)
Cromo , Luminiscencia , Agua , AnionesRESUMEN
The use of terephthalate ligands with CnH2n+1NH-chains (n ≥ 6) led to the isolation of the first examples of Zr4+-terephthalate MOFs with 6-connected frameworks. The material with hexyl-amino functional groups has been proved to be an exceptional sorbent for the removal of As(III/V) toxic species from aqueous media, whereas MOFs with heptyl to dodecyl-amino moieties are superhydrophobic with promising oil-water separation properties.
Asunto(s)
Ácidos Ftálicos , Interacciones Hidrofóbicas e Hidrofílicas , Agua/químicaRESUMEN
Increasing global environmental pollution due to heavy metal ions raises the importance of research on new multifunctional materials for simultaneous detection and removal of these contaminants from water resources. In this study, we report a microporous 8-connected Zr4+ metal-organic framework (MOF) based on a terephthalate ligand decorated with a chelating 2-picolylamine side group (dMOR-2), which shows highly efficient fluorescence sensing and sorption of heavy metal cations. We demonstrate by detailed fluorescence studies the ability of a water-dispersible composite of dMOR-2 with polyvinylpyrrolidone for real-time detection of Cu2+, Pb2+, and Hg2+ in aqueous media. The limits of detection were found to be below 2 ppb for these species, while the system's performance is not affected by the presence of other potentially competitive ions. In addition, sorption studies showed that a composite of dMOR-2 with calcium alginate (dMOR-2@CaA) is an excellent sorbent for Pb2+ and Cu2+ ions with capacities of 376 ± 15 and 117 ± 4 mg per gram of dMOR-2@CaA, respectively, while displaying the capability for simultaneous removal of various heavy metal ions in low initial concentrations and in the presence of large excesses of other cationic species. Structural and spectroscopic studies with model ligands analogous to our material's receptor unit showed chelation to the 2-picolylamine moiety to be the main binding mode of metal ions to dMOR-2. Overall, dMOR-2 is shown to represent a rare example of a MOF, which combines sensitive fluorescence detection and high sorption capacity for heavy metal ions.
Asunto(s)
Estructuras Metalorgánicas , Metales Pesados , Colorantes , Iones , Plomo , Estructuras Metalorgánicas/química , AguaRESUMEN
In this work, we introduce the use of MOFs immobilized on cotton fabrics as a sorbent phase for the fabric phase sorptive extraction and passive sampling of non-polar organic compounds from water samples. A water-stable, Zr4+-based MOF (UiO-66(Zr)-NH2) was irreversibly immobilized on polydopamine decorated cotton through a step-wise synthetic procedure that maximized the amount of MOF immobilized on the fabric surface. In this manner it was possible to combine the permeability and the large contact surface area of the host cotton substrate with the high specific surface area and sorption capacity of the MOF. The MOF@cotton composite was used as a new sorbent phase for the fabric phase sorptive extraction of UV filters, as model organic compounds, not only under static (i.e. stirring assisted) but also in dynamic, flow-through extraction mode (i.e. as a solid phase extraction sorbent phase), producing satisfactory analytical results in terms of linearity of calibration curves (10-250 µg L-1), precision (<11%), detection limits <10 µg L-1 (using a single wavelength UV detector) and recoveries (86 - 119%) from various natural water samples. As a passive sampling sorbent phase, the MOF@cotton composite could linearly accumulate UV filters over time period of 35 days with sampling rates from 0.026 to 0.352 L d-1, which are comparable to other passive sampling sorbent phases.
Asunto(s)
Estructuras Metalorgánicas , Cromatografía Líquida de Alta Presión/métodos , Estructuras Metalorgánicas/química , Ácidos Ftálicos , Agua , Circonio/químicaRESUMEN
The composite anion-exchange material MOR-1-HA (metal-organic resin-1-alginic acid) was investigated as sorbent for the capture of the methyl orange anion (MO- ) from aqueous solutions. MOR-1-HA shows a remarkably high sorption capacity (up to 859â mg g-1 ) and rapid sorption kinetics, the fastest among the reported metal-organic sorbents. It is capable of absorbing MO- over a wide pH range (1-8) and, in addition, it exhibits significant MO- sorption affinity even in the presence of large excesses of competing anions (e.g., Cl- , NO3 - , SO4 2- ). The exceptional MO- -sorption properties of MOR-1-HA arise not only from its highly porous structure and easily exchangeable Cl- anions, but also from a multitude of interaction effects, such as electrostatic interactions between MO- and the NH3 + groups of the material, hydration/dehydration, hydrophobicity/hydrophilicity, size and capacity of generating lateral interactions, and intercalation as revealed by theoretical studies. An ion-exchange column with a stationary phase containing MOR-1-HA and silica sand showed high efficiency for the removal of MO- from various types of aqueous samples. The column can be readily regenerated and reused for many runs with minimal loss (2.3-9.3 %) of its exchange capacity. The simplicity of the MOR-1-HA/sand column and its high regeneration capability and reusability make it particularly attractive for application in the remediation of MO- -contaminated industrial wastewater.