A Room-Temperature Lithium-Restocking Strategy for the Direct Reuse of Degraded LiFePO4 Electrodes.

The sustainable development of lithium iron phosphate (LFP) batteries calls for efficient recycling technologies for spent LFP (SLFP). Even for the advanced direct material regeneration (DMR) method, multiple steps including separation, regeneration, and electrode refabrication processes are still needed. To circumvent these intricacies, new regeneration methods that allow direct electrode reuse (DER) by rejuvenating SLFP electrodes without damaging its structure are desired. Here, a 0.1 M lithium triethyl borohydride/tetrahydrofuran solution, which has the proper reductive capability to reduce Fe3+ in SLFP to Fe2+ without alloying with the aluminum current collector, is selected as the lithiation/regeneration reagent to restock the Li loss and regenerate SLFP electrodes. By soaking the SLFP electrodes in the lithiation solution, we successfully rejuvenated the crystal structure and electrochemical activity of SLFP electrodes with structural integrity within only 6 minutes at room temperature. When being directly reused, the regenerated LFP electrodes deliver a high specific capacity of 162.6 mAh g-1 even after being exposed to air for 3 months. The DER strategy presents significant economic and environmental benefits compared with the DMR method. This research provides a timely and innovative solution for recycling spent blade batteries using large-sized LFP electrodes, boosting the closed-loop development of LFP batteries.

In situ p-block protective layer plating in carbonate-based electrolytes enables stable cell cycling in anode-free lithium batteries.

'Anode-free' Li metal batteries offer the highest possible energy density but face low Li coulombic efficiency when operated in carbonate electrolytes. Here we report a performance improvement of anode-free Li metal batteries using p-block tin octoate additive in the carbonate electrolyte. We show that the preferential adsorption of the octoate moiety on the Cu substrate induces the construction of a carbonate-less protective layer, which inhibits the side reactions and contributes to the uniform Li plating. In the mean time, the reduction of Sn2+ at the initial charging process builds a stable lithophilic layer of Cu6Sn5 alloy and Sn, improving the affinity between the Li and the Cu substrate. Notably, anode-free Li metal pouch cells with tin octoate additive demonstrate good cycling stability with a high coulombic efficiency of ~99.1%. Furthermore, this in situ p-block layer plating strategy is also demonstrated with other types of p-block metal octoate, as well as a Na metal battery system, demonstrating the high level of universality.

Electrolyte Regulation in Stabilizing the Interface of a Cobalt-Free Layered Cathode for 4.8 V High-Voltage Lithium-Ion Batteries.

The cobalt-free layered oxide cathode of LiNi0.65Mn0.35O2 is promising for high-energy-density lithium-ion batteries (LIBs). However, under high-voltage conditions, severe side reactions between the Co-free cathode and electrolyte, as well as grain boundary cracks and pulverization of particles, hinder its practical applications. Herein, an electrolyte regulation strategy is proposed by adding fluoroethylene carbonate (FEC) and LiPO2F2 as electrolyte additives in carbonate-based electrolytes to address the above issues. As a result, a homogeneous and dense organic-inorganic hybrid cathode electrolyte interface (CEI) film is formed on the cathode surface. The CEI film consists of C-F, LiF, Li2CO3, and LixPOyFz species, which is proven to be highly conductive and effective in suppressing structure damage and alleviating the interfacial reactions between the cathode and electrolyte. With such a CEI film, the interfacial stability of the Co-free cathode and the high-voltage cycling performance of Li||LiNi0.65Mn0.35O2 are greatly improved. A reversible capacity of 155.1 mAh g-1 and a capacity retention of 81.3% over 150 cycles are attained at a 4.8 V charge cutoff voltage with the tamed electrolyte, whereas the cell without the additives only retains 76.1% capacity retention. Therefore, our work demonstrates the synergistic effect of FEC and LiPO2F2 in stabilizing the interface of Co-free cathode materials and provides an alternative strategy for the electrolyte design of high-voltage LIBs.

Regenerated Graphite Electrodes with Reconstructed Solid Electrolyte Interface and Enclosed Active Lithium Toward >100% Initial Coulombic Efficiency.

Solid electrolyte interface (SEI) is arguably the most important concern in graphite anodes, which determines their achievable Coulombic efficiency (CE) and cycling stability. In spent graphite anodes, there are already-formed (yet loose and/or broken) SEIs and some residual active lithium, which, if can be inherited in the regenerated electrodes, are highly desired to compensate for the lithium loss due to SEI formation. However, current graphite regenerated approaches easily destroy the thin SEIs and residue active lithium, making their reuse impossible. Herein, this work reports a fast-heating strategy (e.g., 1900 K for ≈150 ms) to upcycle degraded graphite via instantly converting the loose original SEI layer (≈100 nm thick) to a compact and mostly inorganic one (≈10-30 nm thick with a 26X higher Young's Modulus) and still retaining the activity of residual lithium. Thanks to the robust SEI and enclosed active lithium, the regenerated graphite exhibited 104.7% initial CE for half-cell and gifted the full cells with LiFePO4 significantly improved initial CE (98.8% versus 83.2%) and energy density (309.4 versus 281.4 Wh kg-1), as compared with commercial graphite. The as-proposed upcycling strategy turns the "waste" graphite into high-value prelithiated ones, along with significant economic and environmental benefits.

Air-Stable Li2S Cathodes Enabled by an In Situ-Formed Li+ Conductor for Graphite-Li2S Pouch Cells.

Using Li2S cathodes instead of S cathodes presents an opportunity to pair them with Li-free anodes (e.g., graphite), thereby circumventing anode-related issues, such as poor reversibility and safety, encountered in Li-S batteries. However, the moisture-sensitive nature of Li2S causes the release of hazardous H2S and the formation of insulative by-products, increasing the manufacturing difficulty and adversely affecting cathode performance. Here, Li4SnS4, a Li+ conductor that is air-stable according to the hard-soft acid-base principle, is formed in situ and uniformly on Li2S particles because Li2S itself participates in Li4SnS4 formation. When exposed to air (20% relative humidity), the protective Li4SnS4 layer maintains its components and structure, thus contributing to the enhanced stability of the Li2S@Li4SnS4 composite. In addition, the Li4SnS4 layer can accelerate the sluggish conversion of Li2S because of its favorable interfacial charge transfer, and continuously confine lithium polysulfides owing to its integrity during electrochemical processes. A graphite-Li2S pouch cell containing a Li2S@Li4SnS4 cathode is constructed, which shows stable cyclability with 97% capacity retention after 100 cycles. Hence, combining a desirable air-stable Li2S cathode and a highly reversible Li-free configuration offers potential practical applications of graphite-Li2S full cells.

Phenylboronic Acid Functionalized Calix[4]pyrrole-Based Solid-State Supramolecular Electrolyte.

Solid-state polymer electrolytes (SPEs) suffer from the low ionic conductivity and poor capability of suppressing lithium (Li) dendrites, which limits their utility in the preparation of all solid-state Li-metal batteries (LMBs). It is reported here a flexible solid supramolecular electrolyte that incorporates a new anion capture agent, namely a phenylboronic acid functionalized calix[4]pyrrole (C4P), into a poly(ethylene oxide) (PEO) matrix. The resulting solid-state supramolecular electrolyte demonstrates high ionic conductivity (1.9 × 10-3  S cm-1 at 60 °C) and a high Li+ transference number ( t Li + ${t}_{{\mathrm{Li}}^{\mathrm{ + }}}$  = 0.70). Furthermore, the assembled Li|C4P-PEO-LiTFSI|LiFePO4 cell allows for stable cycling over 1200 cycles at 1 C at 60 °C, as well as good rate performance. The favorable performance of the C4P-PEO-LiTFSI SPE leads to suggest it can prove useful in the creation of high energy density solid-state LMBs.

Demystifying the Salt-Induced Li Loss: A Universal Procedure for the Electrolyte Design of Lithium-Metal Batteries.

Lithium (Li) metal electrodes show significantly different reversibility in the electrolytes with different salts. However, the understanding on how the salts impact on the Li loss remains unclear. Herein, using the electrolytes with different salts (e.g., lithium hexafluorophosphate (LiPF6), lithium difluoro(oxalato)borate (LiDFOB), and lithium bis(fluorosulfonyl)amide (LiFSI)) as examples, we decouple the irreversible Li loss (SEI Li+ and "dead" Li) during cycling. It is found that the accumulation of both SEI Li+ and "dead" Li may be responsible to the irreversible Li loss for the Li metal in the electrolyte with LiPF6 salt. While for the electrolytes with LiDFOB and LiFSI salts, the accumulation of "dead" Li predominates the Li loss. We also demonstrate that lithium nitrate and fluoroethylene carbonate additives could, respectively, function as the "dead" Li and SEI Li+ inhibitors. Inspired by the above understandings, we propose a universal procedure for the electrolyte design of Li metal batteries (LMBs): (i) decouple and find the main reason for the irreversible Li loss; (ii) add the corresponding electrolyte additive. With such a Li-loss-targeted strategy, the Li reversibility was significantly enhanced in the electrolytes with 1,2-dimethoxyethane, triethyl phosphate, and tetrahydrofuran solvents. Our strategy may broaden the scope of electrolyte design toward practical LMBs.

Li2Se as a Cathode Prelithiation Additive for Lithium-Ion Batteries.

In conventional lithium-ion batteries (LIBs), active lithium (Li) ions, which function as charge carriers and could only be supplied by the Li-containing cathodes, are also consumed during the formation of the solid electrolyte interphase. Such irreversible Li loss reduces the energy density of LIBs and is highly desired to be compensated by prelithiation additives. Herein, lithium selenide (Li2Se), which could be irreversibly converted into selenide (Se) at 2.5-3.8 V and thus supplies additional Li, is proposed as a cathode prelithiation additive for LIBs. Compared with previously reported prelithiation reagents (e.g., Li6CoO4, Li2O, and Li2S), the delithiation of Li2Se not only delivers a high specific capacity but also avoids gas release and incompatibility with carbonate electrolytes. The electrochemical characterizations show that with the addition of 6 wt % Li2Se to the LiFePO4 (LFP) cathodes, a 9% increase in the initial specific capacity in half Li||LFP cells and a 19.8% increase in the energy density (based on the total mass of the two electrodes' materials) could be achieved without sacrificing the other battery performance. This work demonstrates the possibility to use Li2Se as a high-efficiency prelithiation additive for LIBs and provides a solution to the high-energy LIBs.

Zinc-Contained Alloy as a Robustly Adhered Interfacial Lattice Locking Layer for Planar and Stable Zinc Electrodeposition.

Stable zinc (Zn)/electrolyte interface is critical for developing rechargeable aqueous Zn-metal batteries with long-term stability, which requires the dense and stable Zn electrodeposition. Herein, an interfacial lattice locking (ILL) layer is constructed via the electro-codeposition of Zn and Cu onto the Zn electrodes. The ILL layer shows a low lattice misfit (δ = 0.036) with Zn(002) plane and selectively locks the lattice orientation of Zn deposits, enabling the epitaxial growth of Zn deposits layer by layer. Benefiting from the unique orientation-guiding and robustly adhered properties, the ILL layer enables the symmetric Zn||Zn cells to achieve an ultralong life span of >6000 h at 1 mA cm-2 and 1 mAh cm-2 , a low overpotential (65 mV) at 10 mAh cm-2 , and a stable Zn plating/stripping for >90 h at an ultrahigh Zn depth of discharge (≈85%). Even with a limited Zn supply and a high current density (8.58 mA cm-2 ), the ILL@Zn||Ni-doped MnO2 cells can still survive for >2300 cycles.

A New Zinc Salt Chemistry for Aqueous Zinc-Metal Batteries.

Aqueous zinc-ion batteries (ZIBs) are promising energy storage solutions with low cost and superior safety, but they suffer from chemical and electrochemical degradations closely related to the electrolyte. Here, a new zinc salt design and a drop-in solution for long cycle-life aqueous ZIBs are reported. The salt Zn(BBI)2 with a rationally designed anion group, N-(benzenesulfonyl)benzenesulfonamide (BBI- ), has a special amphiphilic molecular structure, which combines the benefits of hydrophilic and hydrophobic groups to properly tune the solubility and interfacial condition. This new zinc salt does not contain fluorine and is synthesized via a high-yield and low-cost method. It is shown that 1 m Zn(BBI)2 aqueous electrolyte with a widened cathodic stability window effectively stabilizes Zn metal/H2 O interface, mitigates chemical and electrochemical degradations, and enables both symmetric and full cells using a zinc-metal electrode.