RESUMEN
Cobalt-free, high-nickel cathode materials are essential for the sustainable evolution of energy storage technologies, reducing the dependence on resources with significant environmental and social implications and simultaneously improving the efficiency and cost effectiveness of batteries. This paper introduces a cobalt-free, high-nickel cathode material called 0.01B-LiNi0.98Mg0.01Zr0.01O2 (NMZB) developed using a novel blend of elements to enhance mechanical and surface chemical stability. Detailed evaluations confirmed the successful integration of Mg, Zr, and B into the particles, with Mg and Zr primarily located within the particle interior and B predominantly on the surface. This unique elemental configuration significantly improves the stability of the bulk phase and surface structure of the material. In addition, the refinement of primary particles within NMZB further enhances its mechanical stability. As a result, NMZB exhibits exceptional electrochemical stability, achieving 90.5 % capacity retention after 200 cycles at a 1C rate. This compositional strategy incorporates a high nickel content into layered materials while eliminating cobalt, which is crucial for advancing the development of cost effective and high-performance lithium-ion battery technology.
RESUMEN
The design and fabrication of bifunctional catalysts with high electrocatalytic activity and stability are critical for developing highly reversible Li-O2 batteries (LOBs). Herein, the N, P co-doped MXene (NP-MXene) is prepared by one-step annealing method and evaluated as bifunctional catalyst for LOBs. The results suggest that the P doping plays a crucial role in increasing interlayer distance of MXene, thereby effectively providing more active sites, fast mass transfer, and ample space for the deposition/decomposition of Li2O2. Moreover, the N doping can significantly elevate the d-band center of Ti, thereby remarkably improving the adsorption of reaction intermediates and accelerating the deposition/decomposition of Li2O2 films. Consequently, the MXene-based LOBs deliver an ultrahigh specific capacity of 13,995 mAh/g at 500 mA g-1, a discharge/charge voltage gap of 0.89 V, and a cycle life up to 523 cycles with a limited capacity of 1000 mAh/g at 500 mA g-1. Impressively, the as-fabricated flexible LOBs with NP-MXene cathode display excellent cycling stability and ability to continuously power LEDs even after bending. Our findings pave the road of heteroatom doped MXenes as next-generation electrodes for high-performance energy storage and conversion systems.
RESUMEN
The burgeoning demand for electric vehicles with extended driving ranges has propelled ongoing development efforts for ultra-high nickel (Ni > 0.9) cathode materials. Despite significant ongoing research focused on Ni-rich cathode materials, a more comprehensive foundational understanding of ultra-high nickel cathode materials is essential. In our research, we employed LiNi0.94Co0.06O2 as a model ultra-high nickel cathode material to systematically delve into the interplay between sintering temperature, structural features, and electrochemical behavior. Within a sintering temperature spectrum of 660-720 °C, we discerned that specimens produced at diminished temperatures manifest a reduced initial discharge capacity yet excel in cycling endurance. In stark contrast, their counterparts produced at augmented temperatures behave inversely. Identifying a singular sintering temperature that achieves equilibrium between initial discharge capacity and cycling performance proves elusive. Through X-ray diffraction and high-resolution transmission electron microscopy, it became evident that samples synthesized at lower temperatures exhibit pronounced lithium-nickel mixing and develop a thicker NiO layer on the surface, leading to compromised initial discharge performance and capacity. Utilizing focused ion beam scanning electron microscopy, differential capacity analysis, and in-situ X-ray diffraction, we confirm that samples synthesized at lower temperatures possess smaller particle sizes, enabling them to withstand volumetric expansion stress during cycling, resulting in enhanced cycling performance. In the realm of ultra-high nickel cathode materials, elevating the sintering temperature is a conduit to superior initial discharge efficiency and capacity. Yet, the imperative of preserving diminutive particle dimensions, as a stratagem to bolster cycling performance, stands out as a pivotal research frontier.
RESUMEN
The fast and reversible potassiation/depotassiation of anode materials remains an elusive yet intriguing goal. Herein, a class of the P-doping-induced orthorhombic CoTe2 nanowires with Te vacancy defects supported on MXene (o-P-CoTe2 /MXene) is designed and prepared, taking advantage of the synergistic effects of the conductive o-P-CoTe2 arrays with rich Te vacancy defects and the elastic MXene sheets with self-autoadjustable function. Consequently, the o-P-CoTe2 /MXene superstructure exhibits boosted potassium-storage performance, in terms of high reversible capacity (373.7 mAh g-1 at 0.2 A g-1 after 200 cycles), remarkable rate capability (168.2 mAh g-1 at 20 A g-1 ), and outstanding long-term cyclability (0.011% capacity decay per cycle over 2000 cycles at 2 A g-1 ), representing the best performance in transition-metal-dichalcogenides-based anodes to date. Impressively, the flexible full battery with o-P-CoTe2 /MXene anode achieves a satisfying energy density of 275 Wh kg-1 and high bending stability. The kinetics analysis and first-principles calculations reveal superior pseudocapacitive property, high electronic conductivity, and favorable K+ ion adsorption and diffusion capability, corroborating fast K+ ion storage. Especially, ex situ characterizations confirm o-P-CoTe2 /MXene undergoes reversible evolutions of initially proceeding with the K+ ion insertion, followed by the conversion reaction mechanism.
RESUMEN
Garnet-type solid-state electrolytes (SSEs) are promising for the realization of next-generation high-energy-density Li metal batteries. However, a critical issue associated with the garnet electrolytes is the poor physical contact between the Li anode and the garnet SSE and the resultant high interfacial resistance. Here, it is reported that the Li|garnet interface challenge can be addressed by using Li metal doped with 0.5 wt% Na (denoted as Li*) and melt-casting the Li* onto the garnet SSE surface. A mechanistic study, using Li6.4 La3 Zr1.4 Ta0.6 O12 (LLZTO) as a model SSE, reveals that Li2 CO3 resides within the grain boundaries of newly polished LLZTO pellet, which is difficult to remove and hinders the wetting process. The Li* melt can phase-transfer the Li2 CO3 from the LLZTO grain boundary to the Li*'s top surface, and therefore facilitates the wetting process. The obtained Li*|LLZTO demonstrates a low interfacial resistance, high rate capability, and long cycle life, and can find applications in future all-solid-state batteries (e.g., Li*|LLZTO|LiFePO4 ).
