RESUMEN
Improving the therapeutic characteristics of antibiotics is an effective strategy for controlling the growth of multidrug-resistant Gram-negative microorganisms. The purpose of this study was to develop a colistin (CT) delivery system based on hyaluronic acid (HA) and the water-soluble cationic chitosan derivative, diethylaminoethyl chitosan (DEAECS). The CT delivery system was a polyelectrolyte complex (PEC) obtained by interpolymeric interactions between the HA polyanion and the DEAECS polycation, with simultaneous inclusion of positively charged CT molecules into the resulting complex. The developed PEC had a hydrodynamic diameter of 210-250 nm and a negative surface charge (ζ-potential = -19 mV); the encapsulation and loading efficiencies were 100 and 16.7%, respectively. The developed CT delivery systems were characterized by modified release (30-40% and 85-90% of CT released in 15 and 60 min, respectively) compared to pure CT (100% CT released in 15 min). In vitro experiments showed that the encapsulation of CT in polysaccharide carriers did not reduce its antimicrobial activity, as the minimum inhibitory concentrations against Pseudomonas aeruginosa of both encapsulated CT and pure CT were 1 µg/mL.
Asunto(s)
Antibacterianos/administración & dosificación , Quitosano/química , Colistina/administración & dosificación , Portadores de Fármacos/química , Ácido Hialurónico/química , Polielectrolitos/química , Antibacterianos/farmacología , Colistina/farmacología , Humanos , Infecciones por Pseudomonas/tratamiento farmacológico , Pseudomonas aeruginosa/efectos de los fármacosRESUMEN
Nanotechnology-based modification of known antimicrobial agents is a rational and straightforward way to improve their safety and effectiveness. The aim of this study was to develop colistin (CT)-loaded polymeric carriers based on hyaluronic acid (HA) for potential application as antimicrobial agents against multi-resistant gram-negative microorganisms (including ESKAPE pathogens). CT-containing particles were obtained via a polyelectrolyte interaction between protonated CT amino groups and HA carboxyl groups (the CT-HA complex formation constant [logKCT-HA] was about 5.0). The resulting polyelectrolyte complexes had a size of 210-250 nm and a negative charge (ζ-potential -19 mV), with encapsulation and loading efficiencies of 100% and 20%, respectively. The developed CT delivery systems were characterized by modified release (45% and 85% of CT released in 15 and 60 min, respectively) compared to pure CT (100% CT released in 15 min). In vitro tests showed that the encapsulation of CT in polymer particles did not reduce its pharmacological activity; the minimum inhibitory concentrations of both encapsulated CT and pure CT were 1 µg/mL (against Pseudomonas aeruginosa).
Asunto(s)
Antiinfecciosos , Colistina , Ácido Hialurónico , Polielectrolitos , Pseudomonas aeruginosa/crecimiento & desarrollo , Antiinfecciosos/química , Antiinfecciosos/farmacología , Colistina/química , Colistina/farmacología , Ácido Hialurónico/química , Ácido Hialurónico/farmacología , Polielectrolitos/química , Polielectrolitos/farmacologíaRESUMEN
Polyplex-based gene delivery systems are promising substitutes for viral vectors because of their high versatility and lack of disadvantages commonly encountered with viruses. In this work, we studied the DNA polyplexes with N-[4-(N,N,N-trimethylammonium)benzyl]chitosan chloride (TMAB-CS) of various compositions in different cell types. Investigations of the interaction of TMAB-CS with DNA by different physical methods revealed that the molecular weight and the degree of substitution do not dramatically influence the hydrodynamic properties of polyplexes. Highly substituted TMAB-CS samples had a high affinity for DNA. The transfection protocol was optimized in HEK293T cells and achieved the highest efficiency of 30-35%. TMAB-CS was dramatically less effective in nonadherent K562 cells (around 1% transfected cells), but it was more effective and less toxic than polyarginine.
RESUMEN
Chitin and chitosan can undergo nonspecific enzymatic hydrolysis by several different hydrolases. This susceptibility to nonspecific enzymes opens up many opportunities for producing chitooligosaccharides and low molecular weight chitopolysaccharides, since specific chitinases and chitosanases are rare and not commercially available. In this study, chitosan and chitin were hydrolyzed using several commercially available hydrolases. Among them, cellulases with the highest specific activity demonstrated the best activity, as indicated by the rapid decrease in viscosity of a chitosan solution. The hydrolysis of chitosan by nonspecific enzymes generated a sugar release that corresponded to the decrease in the degree of polymerization. This decrease reached a maximum of 3.3-fold upon hydrolysis of 10% of the sample. Cellulases were better than lysozyme or amylases at hydrolyzing chitosan and chitin. Analysis of 13C CP-MAS NMR and FTIR spectra of chitin after cellulase treatment revealed changes in the chitin crystal structure related to rearrangement of inter- and intramolecular H-bonds. The structural changes and decreases in crystallinity allowed dissolution of chitin molecules of high molecular weight and enhanced the solubility of chitin in alkali by 10-12% compared to untreated chitin.
Asunto(s)
Quitina/química , Quitosano/química , Enlace de Hidrógeno , Hidrolasas/metabolismo , Hidrólisis , ViscosidadRESUMEN
The topical application of ophthalmic drugs is a convenient and safe mode of drug administration. However, the bioavailability of topical drugs in the eye is low due to eye barriers and the rapid removal of the drug from the conjunctival surface by the tear fluid. The aim of this study was to obtain dexamethasone-loaded mucoadhesive self-assembled particles based on a conjugate of succinyl cholesterol with chitosan (SC-CS) for potential use as a topical ocular formulation. SC-CS was obtained via a carbodiimide-mediated coupling reaction (degree of substitution DS 1.2-5.8%). SC-CS in the DS range of 1.2-3.0% can self-organize in solution to form positively charged particles (ζ-potential 20-37 mV) of submicron size (hydrodynamic diameter 700-900 nm). The SC-CS particles show good mucoadhesiveness, which decreases with increasing DS. The obtained particles can encapsulate 159-170 µg/mg dexamethasone; they release about 50% of drug in 2 h, and the cumulative drug release reached 95% in 24 h. A cell model confirmed that dexamethasone-loaded SC-CS particles are non-cytotoxic and exhibit a comparable anti-inflammatory activity to that of pure dexamethasone. Testing the osmotic resistance of erythrocytes showed that both dexamethasone-loaded and non-loaded SC-CS particles have greater membrane-stabilizing ability than that of dexamethasone.
RESUMEN
Recently, much effort has been expended on the development of non-viral gene delivery systems based on polyplexes of nucleic acids with various cationic polymers. Natural polysaccharide derivatives are promising carriers due to their low toxicity. In this work, chitosan was chemically modified by a reaction with 4-formyl-n,n,n-trimethylanilinium iodide and pyridoxal hydrochloride and subsequent reduction of the imine bond with NaBH4. This reaction yielded three novel derivatives, n-[4-(n',n',n'-trimethylammonium)benzyl]chitosan chloride (TMAB-CS), n-[(3-hydroxy-5-(hydroxymethyl)-2-methyl-4-pyridine)methyl]chitosan chloride (Pyr-CS), and n-[4-(n',n',n''-trimethylammonium)benzyl]-n-[(3-hydroxy-5-(hydroxymethyl)-2-methyl-4-pyridine)methyl]chitosan chloride (PyrTMAB-CS). Their structures and degrees of substitution were established by 1H NMR spectroscopy as DS1 = 0.22 for TMAB-CS, DS2 = 0.28 for Pyr-CS, and DS1 = 0.21, DS2 = 0.22 for PyrTMAB-CS. Dynamic light scattering measurements revealed that the new polymers formed stable polyplexes with plasmid DNA encoding the green fluorescent protein (pEGFP-N3) and that the particles had the smallest size (110-165 nm) when the polymer:DNA mass ratio was higher than 5:1. Transfection experiments carried out in the HEK293 cell line using the polymer:DNA polyplexes demonstrated that Pyr-CS was a rather poor transfection agent at polymer:DNA mass ratios less than 10:1, but it was still more effective than the TMAB-CS and PyrTMAB-CS derivatives that contained a quaternary ammonium group. By contrast, TMAB-CS and PyrTMAB-CS were substantially more effective than Pyr-CS at higher polymer:DNA mass ratios and showed a maximum efficiency at 200:1 (50%-70% transfected cells). Overall, the results show the possibility of combining substituent effects in a single carrier, thereby increasing its efficacy.
RESUMEN
Polysaccharide-based polyelectrolyte complexes (PECs) are of great interest for the development of drug delivery systems, as they are easily prepared and exhibit a wide range of colloidal properties. The water-soluble diethylaminoethyl chitosan (DEAE-CS) was synthesized with various degrees of substitution (DS), ranging from 26 to 113%. Analysis of the substitution pattern of DEAE-CS by different NMR techniques revealed N- and O-substitution, as well as quaternization of the tertiary amino group of the DEAE substituent; the fraction of quaternary amino groups increased with the DS. Unlike the tertiary amino groups, the quaternary amino groups did not support increases in the ζ-potential of DEAE-CS with the DS and the complexation with hyaluronic acid (HA). The influence of the PEC composition, DS of DEAE-CS, and mixing order on the size and polydispersity of PEC nanoparticles was investigated by dynamic and static light scattering. Internal disordered heterogeneous PEC nanoparticles were formed by the aggregates of several primary PECs. Disordered and structurally heterogeneous spherical complexes were formed (Rg/Rh = 1.0 ± 0.3). The obtained PECs were metastable and their properties were influenced by mixing order. The high molecular weight component (HA), being a minor component, was more exposed on the surface than was the low molecular weight DEAE-CS.
Asunto(s)
Quitosano/química , Ácido Hialurónico/química , Polielectrolitos/química , Quitosano/síntesis química , Espectroscopía de Protones por Resonancia Magnética , Electricidad EstáticaRESUMEN
Hydrogels are promising materials for various applications, including drug delivery, tissue engineering, and wastewater treatment. In this work, we designed an alginate (ALG) hydrogel containing partially deacetylated chitin nanowhiskers (CNW) as a filler. Gelation in the system occurred by both the protonation of alginic acid and the formation of a polyelectrolyte complex with deacetylated CNW surface chains. Morphological changes in the gel manifested as a honeycomb structure in the freeze-dried gel, unlike the layered structure of an ALG gel. Disturbance of the structural orientation of the gels by the introduction of CNW was also expressed as a decrease in the intensity of X-ray diffraction reflexes. All studied systems were non-Newtonian liquids that violated the Cox-Merz rule. An increase in the content of CNW in the ALG-CNW hydrogel resulted in increases in the yield stress, maximum Newtonian viscosity, and relaxation time. Inclusion of CNW prolonged the release of tetracycline due to changes in diffusion. The first phases (0-5 h) of the release profiles were well described by the Higuchi model. ALG-CNW hydrogels may be of interest as soft gels for controlled topical or intestinal drug delivery.
Asunto(s)
Alginatos/química , Materiales Biocompatibles/química , Quitina/química , Liberación de Fármacos , Hidrogeles/química , Reología , Tetraciclina/química , ViscosidadRESUMEN
In this paper, we compared the transfection efficiency and cytotoxicity of methylglycol-chitosan (MG-CS) and diethylaminoethyl-chitosan (DEAE-CSI and DEAE-CSII with degrees of substitution of 1.2 and 0.57, respectively) to that of Lipofectamine (used as a reference transfection vector). MG-CS contains quaternary amines to improve DNA binding, whereas the DEAE-CS exhibits pH buffering capability that would ostensibly enhance transfection efficiency by promoting endosomal escape. Gel retardation assays showed that both DEAE-CS and MG-CS bound to DNA at a polysaccharide:DNA mass ratio of 2:1. In Calu-3 cells, the DNA transfection activity was significantly better with MG-CS than with DEAE-CS, and the efficiency improved with increasing polysaccharide:DNA ratios. By contrast, the efficiency of DEAE-CSI and DEAE-CSII was independent of the polysaccharide:DNA ratio. Conversely, in the transfection-recalcitrant JAWSII cells, both Lipofectamine and MG-CS showed significantly lower DNA transfection activity than in Calu-3 cells, whereas the efficiency of DEAE-CSI and DEAE-CSII was similar in both cell lines. The toxicity of DEAE-CS increased with increasing concentrations of the polymer and its degree of substitution, whereas MG-CS demonstrated negligible cytotoxicity, even at the highest concentration studied. Overall, MG-CS proved to be a more efficient and less toxic transfection agent when compared to DEAE-CS.
RESUMEN
Ð novel cationic chitosan derivative, N-[4-(N,N,N-trimethylammonium)benzyl]chitosan chloride (TMAB-CS), with different degrees of substitution (DS) was synthesized by a chemoselective interaction of 4-formyl-N,N,N-trimethylanilinium iodide with chitosan amino groups using a reductive amination method. Several factors (pH, reactant ratio, reaction time, and chitosan structure) were studied for their effects on the DS of the resulting TMAB-CS. The obtained derivatives were characterized by 1H NMR and FTIR spectroscopy. Turbidimetric titration showed enhanced solubility over a wide pH range even for low-substituted TMAB-CS. TMAB-CS provided strong DS-dependent binding of plasmid DNA. Dynamic light scattering measurements revealed the formation of stable polyplexes with hydrodynamic diameters of 200-300nm and ζ-potential of 20-30mV. TMAB-CS with relatively low DS (25%) demonstrated more pronounced transfection efficiency (up to 2000 cell/cm2) of plasmid DNA into the HEK293 cell line promoted by free TMAB-CS. The positive effects of lower DS can be related to a better polyplex dissociation within the cell. The cytotoxicity of TMAB-CS was comparable to that of the initial chitosan at concentrations up to 300ng/µL, even at high DS.
Asunto(s)
Quitosano/análogos & derivados , Quitosano/química , ADN/química , Compuestos de Amonio Cuaternario/química , Quitosano/síntesis química , Quitosano/toxicidad , ADN/genética , Células HEK293 , Humanos , Plásmidos , Compuestos de Amonio Cuaternario/síntesis química , Compuestos de Amonio Cuaternario/toxicidad , Solubilidad , TransfecciónRESUMEN
The effects of temperature, reactant ratio, pH, and reaction time were studied on the polymers formed by the reactions of succinic and glutaric anhydrides with chitosan under both homogeneous and heterogeneous conditions. As a result, protocols were developed for the synthesis of succinyl- and glutaryl-chitosan derivatives (SC and GC, respectively) with a specific degree of substitution. The polymers were characterized by NMR spectroscopy, including two-dimensional NMR techniques, that confirms N-substitution of chitosan under reaction conditions used. SC and GC both show pronounced and similar antioxidant activity, which slightly increases with an increase in the degree of substitution. Both SC and GC showed antiplatelet and anticoagulant activity. The platelet aggregation is suppressed more strongly in the experiments with GC than with SC, although the latter exhibits a more pronounced anticoagulant activity.