RESUMEN
Chemical diversification of hybrid organic-inorganic glasses remains limited, especially compared to traditional oxide glasses, for which property tuning is possible through addition of weakly bonded modifier cations. In this work, it is shown that water can depolymerize polyhedra with labile metal-ligand bonds in a cobalt-based coordination network, yielding a series of nonstoichiometric glasses. Calorimetric, spectroscopic, and simulation studies demonstrate that the added water molecules promote the breakage of network bonds and coordination number changes, leading to lower melting and glass transition temperatures. These structural changes modify the physical and chemical properties of the melt-quenched glass, with strong parallels to the "modifier" concept in oxides. It is shown that this approach also applies to other transition metal-based coordination networks, and it will thus enable diversification of hybrid glass chemistry, including nonstoichiometric glass compositions, tuning of properties, and a significant rise in the number of glass-forming hybrid systems by allowing them to melt before thermal decomposition.
RESUMEN
Simultaneously improving the strength and toughness of materials is a major challenge. Inorganic-polymer hybrids offer the potential to combine mechanical properties of a stiff inorganic glass with a flexible organic polymer. However, the toughening mechanism at the atomic scale remains largely unknown. Based on combined experimental and molecular dynamics simulation results, we find that the deformation and fracture behavior of hybrids are governed by noncovalent intermolecular interactions between polymer and silica networks rather than the breakage of covalent bonds. We then attempt three methods to improve the balance between strength and toughness of hybrids, namely the total inorganic/organic (I/O) weight ratio, the size of silica nanoparticles, and the ratio of -C-O vs -C-C bonds in the polymer chains. Specifically, for a hybrid with matched silica size and I/O ratio, we demonstrate optimized mechanical properties in terms of strength (1.75 MPa at breakage), degree of elongation at the fracture point (31%), toughness (219 kPa), hardness (1.08 MPa), as well as Young's modulus (3.0 MPa). We also demonstrate that this hybrid material shows excellent biocompatibility and ability to support cell attachment as well as proliferation. This supports the possible application of this material as a strong yet tough bone scaffold material.
Asunto(s)
Polímeros , Dióxido de Silicio , Dióxido de Silicio/química , Ensayo de Materiales , Vidrio/química , DurezaRESUMEN
Aluminoborosilicate glasses find a wide range of applications, which require good mechanical reliability such as surface damage resistance. Calcium aluminoborosilicate (CABS) glasses have recently been found to exhibit so-called intermediate behavior in terms of their response to sharp contact loading. That is, these glasses deform with less shear than normal glass and less densification than anomalous glasses. This deformation mechanism is believed to give rise to high crack initiation resistance of certain CABS glasses. In order to further improve and understand the micromechanical properties of this glass family, we studied the indentation response of different CABS glasses subjected to two types of post-treatment, namely hot compression and humid aging. Upon hot compression, density, elastic moduli, and hardness increased. Specifically, elastic modulus increased by as much as 20% relative to the as-made sample, while the largest change in hardness was 1.8 GPa compared to the as-made sample after hot compression. The pressure-induced increase in these properties can be ascribed to the increase in network connectivity and bond density. On the other hand, the crack initiation resistance decreased, as the hot compression increased the residual stress driving the indentation cracking. Humid aging had only a minor impact on density, modulus, and hardness, but an observed decrease in crack initiation resistance. We discuss the correlations between hardness, density, crack resistance, and deformation mechanism and our study thus provides guidelines for tailoring the mechanical properties of oxide glasses.
RESUMEN
In some biomaterial applications, the device needs to resist cyclic loading. Recently, self-healing hybrid systems with interpenetrating network of organic and inorganic components have been discovered. In this work, we clarify the structure-mechanical property relations in a new series of silica-poly(tetrahydropyran)-poly(ε-caprolactone) (SiO2-PTHP-PCL) materials, which were prepared through a three-step synthesis, including one-pot cationic ring-opening polymerization, sol-gel reaction, and polymer-silica cross condensation. We applied THP as the main constituent of the organic phase and achieved successful polymerization under mild conditions, while the hybrid structures were controlled by the degree of silica-crosslinking and the organic/inorganic ratio. The thermal stabilities, densities, Young's modulus as well as hardness could also be regulated through such control. Notably, we find that the hybrid materials with organic polymer content above 73% are able to self-heal induced damages, including under body temperature conditions and the mechanical properties of the self-healed material are similar to those of the fresh samples. We ascribe this primarily to the reversible intermolecular interactions and hydrogen bonding among the polymer chains. Finally, we discover that the PTHP-SiO2 networks are stable in a simulated bio-environment although PCL underwent biodegradation. The present structural control approach could lead to the design of tailored functional hybrid materials, with potential applications within areas such as soft robotics and bone regeneration.
Asunto(s)
Poliésteres/química , Piranos/química , Dióxido de Silicio/química , Cromatografía en Capa Delgada , Módulo de Elasticidad , Espectroscopía de Resonancia Magnética/métodos , Estructura Molecular , Espectrofotometría Infrarroja/métodos , Termogravimetría , Difracción de Rayos XRESUMEN
While viologen derivatives have long been known for electrochromism and photochromism, here we demonstrated that a viologen-carboxylate zwitterionic molecule in the crystalline state exhibits piezochromic and hydrochromic behaviors. The yellow crystal undergoes a reversible color change to red under high pressure, to green after decompression, and finally back to yellow upon standing at ambient pressure. Ultraviolet-visible spectroscopy, X-ray photoelectron spectroscopy, electron paramagnetic resonance X-ray diffraction and DFT calculations suggested that the piezochromism is due to the formation of radicals via pressure-induced electron transfer from carboxylate to pyridinium, without a crystallographic phase transition. It was proposed that electron transfer is induced by pressure-forced reduction of intermolecular donor-acceptor contacts. The electron transfer can also be induced by dehydration, which gives a stable green anhydrous radical phase. The color change is reversible upon reabsorption of water, which triggers reverse electron transfer. The compound not only demonstrates new chromic phenomena for viologen compounds, but also represents the first example of organic mechanochromism and hydrochromism associated with radical formation via electron transfer.
RESUMEN
The pressure limit in the large-volume-press (LVP) is increasing, but the in situ pressure calibration in LVP is still not a well resolved problem. The variation of the electrical resistance of the manganin with pressure in a hydrostatic condition is well known and is widely used in the pressure calibration in LVP. However, the hydrostatic pressure condition is hard to be maintained for the unavoidable solidification of the pressure transmitting medium (PTM) with pressure increasing. Moreover, our understanding about the relationship between pressure and manganin's resistance in a solid transmitting medium is still limited. Therefore, it is difficult to calibrate higher pressure using manganin. We measured the electrical resistance of manganin under pressure in pyrophyllite, MgO, and NaCl, respectively. The results show a linear relationship between the resistance and pressure in the same PTM with good reproducibility. In addition, the resistance-pressure relationships of manganin in different PTM are obviously different. So the resistance of manganin in a given solid PTM can be satisfactorily used as a pressure gauge only in the same PTM but cannot be used in other pressure media. Our results make it possible to calibrate higher pressure in a solid pressure transmitting medium in LVP.
RESUMEN
Hydrostatic pressure, as an alternative of chemical pressure to tune the crystal structure and physical properties, is a significant technique for novel function material design and fundamental research. In this article, we report the phase stability and visible light response of the organolead bromide perovskite, CH3NH3PbBr3 (MAPbBr3), under hydrostatic pressure up to 34 GPa at room temperature. Two phase transformations below 2 GPa (from Pm3Ì m to Im3Ì , then to Pnma) and a reversible amorphization starting from about 2 GPa were observed, which could be attributed to the tilting of PbBr6 octahedra and destroying of long-range ordering of MA cations, respectively. The visible light response of MAPbBr3 to pressure was studied by in situ photoluminescence, electric resistance, photocurrent measurements and first-principle simulations. The anomalous band gap evolution during compression with red-shift followed by blue-shift is explained by the competition between compression effect and pressure-induced amorphization. Along with the amorphization process accomplished around 25 GPa, the resistance increased by 5 orders of magnitude while the system still maintains its semiconductor characteristics and considerable response to the visible light irradiation. Our results not only show that hydrostatic pressure may provide an applicable tool for the organohalide perovskites based photovoltaic device functioning as switcher or controller, but also shed light on the exploration of more amorphous organometal composites as potential light absorber.