RESUMEN
Emerging contaminants (ECs) in secondary effluent of wastewater treatment plants (WWTPs) have received increasing attention due to their adverse effects on aquatic ecosystems and human health. Herein, visible-light responsive photocatalyst TM (TiO2 @NH2-MIL-101(Fe)) and resultant photocatalytic ultrafiltration (PUF, PVDF/TM) membrane were prepared to remove 32 typical compounds of antibiotics, 296 compounds of antibiotic resistance genes (ARGs), and their corresponding bacterial hosts. The construction of heterojunction photocatalyst promoted the electron transfer from NH2-MIL-101(Fe) to TiO2 and the formation of N-TiO2, enhancing visible-light (λ ≥ 420 nm) photocatalytic activity. With highly-hydrophilic surface and delicately-regulated pore structure, the initial water permeance of optimal PUF membrane significantly increased to 3912.2 L/m2/h at 1.0 bar. Meanwhile, membrane retention (via adsorption, electrostatic interaction, and steric hindrance) was improved due to the narrowed pore size, highly-negative surface charge and abundant functional groups. Additionally, hydroxyl radical (â¢OH) was the dominant active reactive oxygen species (ROS) for ECs degradation, and the narrowed pore structure could serve as microreactors to increase ROS concentration and reduce migration distance. Consequently, the removal efficiencies of antibiotics, bacteria and ARGs were 86.5 %, 91.4 % and 91.8 %, respectively. Overall, this novel visible-light-activated PUF membrane expands membrane application, and has great potential in ECs treatment.
RESUMEN
Liquid metal (LM) nanodroplets possess intriguing surface properties, thus offering promising potential in chemical synthesis, catalysis, and biomedicine. However, the reaction kinetics and product growth at the surface of LM nanodroplets are significantly influenced by the interface involved, which has not been thoroughly explored and understood. Here, we propose an interface engineering strategy, taking a spontaneous galvanic reaction between Ga0 and AuCl4- ions as a representative example, to successfully modulate the growth of heterostructures on the surface of Ga-based LM nanodroplets by establishing a dielectric interface with a controllable thickness between LM and reactive surroundings. Combining high-resolution electron energy-loss spectroscopy (EELS) analysis and theoretical simulation, it was found that the induced charge distribution at the interface dominates the spatiotemporal distribution of the reaction sites. Employing tungsten oxide (WOx) with varying thicknesses as the demonstrated dielectric interface of LM, Ga@WOx@Au with distinct core-shell-satellite or dimer-like heterostructures has been achieved and exhibited different photoresponsive capabilities for photodetection. Understanding the kinetics of product growth and the regulatory strategy of the dielectric interface provides an experimental approach to controlling the structure and properties of products in LM nanodroplet-involved chemical processes.
RESUMEN
Sol-gel processed zinc oxide (ZnO) is one of the most widely used electron transport layers (ETLs) in inverted organic solar cells (OSCs). The high annealing temperature (≈200 °C) required for sintering to ensure a high electron mobility however results in severe damage to flexible substrates. Thus, flexible organic solar cells based on sol-gel processed ZnO exhibit significantly lower efficiency than rigid devices. In this paper, an indium-doping approach is developed to improve the optoelectronic properties of ZnO layers and reduce the required annealing temperature. Inverted OSCs based on In-doped ZnO (IZO) exhibit a higher efficiency than those based on ZnO for a range of different active layer systems. For the PM6:L8-BO system, the efficiency increases from 17.0% for the pristine ZnO-based device to 17.8% for the IZO-based device. The IZO-based device with an active layer of PM6:L8-BO:BTP-eC9 exhibits an even higher efficiency of up to 18.1%. In addition, a 1.2-micrometer-thick inverted ultrathin flexible organic solar cell is fabricated based on the IZO ETL that achieves an efficiency of 17.0% with a power-per-weight ratio of 40.4 W g-1, which is one of the highest efficiency for ultrathin (less than 10 micrometers) flexible organic solar cells.
RESUMEN
Despite the great potential of anti-PD-L1 antibodies for immunotherapy, their low response rate due to an immunosuppressive tumor microenvironment has hampered their application. To address this issue, we constructed a cell membrane-coated nanosystem (mB4S) to reverse an immunosuppressive microenvironment to an immuno-supportive one for strengthening the anti-tumor effect. In this system, Epirubicin (EPI) as an immunogenic cell death (ICD) inducer was coupled to a branched glycopolymer via hydrazone bonds and diABZI as a stimulator of interferon genes (STING) agonist was encapsulated into mB4S. After internalization of mB4S, EPI was acidic-responsively released to induce ICD, which was characterized by an increased level of calreticulin (CRT) exposure and enhanced ATP secretion. Meanwhile, diABZI effectively activated the STING pathway. Treatment with mB4S in combination with an anti-PD-L1 antibody elicited potent immune responses by increasing the ratio of matured dendritic cells (DCs) and CD8+ T cells, promoting cytokines secretion, up-regulating M1-like tumor-associated macrophages (TAMs) and down-regulating immunosuppressive myeloid-derived suppressor cells (MDSCs). Therefore, this nanosystem for co-delivery of an ICD inducer and a STING agonist achieved promotion of DCs maturation and CD8+ T cells infiltration, creating an immuno-supportive microenvironment, thus potentiating the therapy effect of the anti-PD-L1 antibody in both 4T1 breast and CT26 colon tumor mice.
RESUMEN
The strategic formulation of a compatible electrolyte plays a pivotal role in extending the longevity of lithium-metal batteries (LMBs). Here, we present findings on a partially fluorinated electrolyte distinguished by a subdued solvation affinity towards Li+ ions and a concentrated anion presence within the primary solvation layer. This distinctive solvation arrangement redirects the focal points of reactions from solvent molecules to anions, facilitating the predominant involvement of anions in the creation of a LiF-enriched solid-electrolyte interphase (SEI). Electrochemical assessments showcase effective Li+ transport kinetics, diminished overpotential polarization for Li nucleation (28â mV), and prolonged cycling durability in Li||Li cells employing the partially fluorinated electrolyte. When tested in Li||NCM811 cells, the designed electrolyte delivers a capacity retention of 89.30 % and exhibits a high average Coulombic efficiency of 99.80 % over 100 cycles with a charge-potential cut-off of 4.6â V vs. Li/Li+ under the current density of 0.4C. Furthermore, even at a current density of 1C, the cells maintain 81.90 % capacity retention and a high average Coulombic efficiency of 99.40 % after 180 cycles. This work underscores the significance of weak-solvation interaction in partially fluorinated electrolytes and highlights the crucial role of solvent structure in enabling the long-term stability and high-energy density of LMBs.
RESUMEN
Phosphonate is becoming a global interest and concern owing to its environment risk and potential value. Degradation of phosphonate into phosphate followed by the recovery is regarded as a promising strategy to control phosphonate pollution, relieve phosphorus crisis, and promote phosphorus cycle. Given these objectives, an anion-membrane-coated-electrode (A-MCE) doped with Fe-Co based carbon catalyst and cation-membrane-coated-electrode (C-MCE) doped with carbon-based catalyst were prepared as catalytic electrodes, and a novel electrocatalytic capacitive deionization (E-CDI) was developed. During charging process, phosphonate was enriched around A-MCE surface based on electrostatic attraction, ligand exchange, and hydrogen bond. Meanwhile, Fe2+ and Co2+ were self-oxidized into Fe3+ and Co3+, forming a complex with enriched phosphonate and enabling an intramolecular electron transfer process for phosphonate degradation. Additionally, benefiting from the stable dissolved oxygen and high oxygen reduction reaction activity of C-MCE, hydrogen peroxide accumulated in E-CDI (158 µM) and thus hydroxyl radicals (·OH) were generated by activation. E-CDI provided an ideal platform for the effective reaction between ·OH and phosphonate, avoiding the loss of ·OH and triggering selective degradation of most phosphonate. After charging for 70 min, approximately 89.9% of phosphonate was degraded into phosphate, and phosphate was subsequently adsorbed by A-MCE. Results also showed that phosphonate degradation was highly dependent on solution pH and voltage, and was insignificantly affected by electrolyte concentration. Compared to traditional advanced oxidation processes, E-CDI exhibited a higher degradation efficiency, lower cost, and less sensitive to co-existed ions in treating simulated wastewaters. Self-enhanced and selective degradation of phosphonate, and in-situ phosphate adsorption were simultaneously achieved for the first time by a E-CDI system, showing high promise in treating organic-containing saline wastewaters.
Asunto(s)
Electrodos , Organofosfonatos , Catálisis , Organofosfonatos/química , Contaminantes Químicos del Agua/química , Oxidación-ReducciónRESUMEN
Purpose: Our study aimed to explore the correlation between Sjögren syndrome, sociodemographic factors, comorbid conditions, and optic neuritis. Methods: This retrospective, nationwide, population-based, matched case-control investigation involved 33,190 individuals diagnosed with optic neuritis, identified using the International Classification of Diseases, Ninth Revision, Clinical Modification codes 377.30 for optic neuritis or 377.32 for retrobulbar neuritis. Patient data were extracted from the Taiwan National Health Insurance Research Database. Demographic characteristics, the presence of Sjögren syndrome, and pre-existing comorbid conditions were analyzed using univariate logistic regression. Continuous variables were assessed with a paired t-test. Adjusted logistic regression was employed to compare the prognosis odds ratio (OR) of patients with optic neuritis to controls. Results: After adjusting for confounding variables, individuals with Sjögren syndrome exhibited a significantly higher likelihood of developing optic neuritis compared to controls (adjusted OR, 9.79; 95% confidence interval [CI], 7.28-12.98; p < 0.0001). Other conditions associated with increased odds of optic neuritis included rheumatoid arthritis, ankylosing spondylitis, multiple sclerosis, systemic lupus erythematosus, and granulomatous vasculitis (adjusted OR: 1.57, 95% CI: 1.33-1.86; adjusted OR: 2.02, 95% CI: 1.65-2.48; adjusted OR: 140.77, 95% CI: 35.02-565.85; adjusted OR: 2.38, 95% CI: 1.71-3.30; adjusted OR: 18.28, 95% CI: 2.21-151.45, respectively), as well as systemic infections such as human herpes viral infection and tuberculosis infection (adjusted OR: 1.50, 95% CI: 1.35-1.66; adjusted OR: 4.60, 95% CI: 3.81-5.56, respectively). Discussion: Our findings strongly support the existence of an association between Sjögren syndrome, rheumatoid arthritis, ankylosing spondylitis, multiple sclerosis, systemic lupus erythematosus, granulomatous vasculitis, human herpes viral infection, tuberculosis, and optic neuritis.
RESUMEN
Experiments were conducted in this study on the co-hydropyrolysis of three components of biomass (cellulose, hemicellulose, and lignin) and HDPE by using SR-Pd/Trap-HZ-5 as catalyst. To control the variable, we use the same experiment conditions in co-hydropyrolysis: Si/Al ratio of 50, Pd load 1 %, catalyst to reactant ratio of 1 : 10, 1â MPa, 400 °C, reaction time 1â h. Use XRD, TEM, BET, and NH3-TPD to confirm catalyst successful synthesis; use pine sawdust (PW) co-hydropyrolysis with HDPE to analyse catalytic activity; and use GC/MS to characterize the chemical composition of the bio-oil from the co-hydropyrolysis of biomass components and HDPE. The results show that cellulose has a significant synergistic effect with aromatic hydrocarbon production, whose selectivity was 93.3 %; hemicellulose has a synergistic effect; aromatic selectivity can reach 75.1 %; and a negative synergistic effect between lignin and HDPE was shown as the selectivity of aromatic hydrocarbons decreased from 62.1 % to 15.6 %.
Asunto(s)
Biomasa , Celulosa , Hidrocarburos Aromáticos , Polisacáridos , Pirólisis , Zeolitas , Catálisis , Hidrocarburos Aromáticos/química , Polisacáridos/química , Celulosa/química , Zeolitas/química , Lignina/químicaRESUMEN
Objective: To analyze the effect of stump-preserving repair on rotator cuff healing and shoulder function for degenerative total rotator cuff tears. Methods: A clinical data of 152 patients with degenerative total rotator cuff tears, who underwent arthroscopic repair between April 2019 and May 2022, was retrospectively analyzed. There were 76 males and 76 females with an average age of 55.4 years (range, 24-78 years). MRI was performed at 6 months postoperatively to evaluate the rotator cuff healing according to the Sugaya classification. Pre- and intra-operative related factors were included for univariate analysis, including age (≥60 years/<60 years), gender (male/female), passive activity disorder (yes/no), disease duration (≤3 months/>3 months), stump-preserving repair (yes/no), use of suture bridge technique (yes/no), shoulder joint abduction angle at knotting (<45°/≥45°), acromioplasty (yes/no), glucocorticoid injection (yes/no), time for patients to start postoperative passive exercise (≤2 weeks/>2 weeks), and time for patients to start postoperative active exercise (≤3 months/>3 months). The influencing factors of tendon healing were screened; further logistic regression was used to conduct multivariate analysis to screen for risk factors. Two sets of data were balanced by propensity score matching. The American Shoulder and Elbow Surgeons (ASES) score and Constant-Murley score of shoulder joint function at 6 and 12 months postoperatively, as well as rotator cuff healing rate at 6 months postoperatively, were compared between groups based on whether or not stump-preserving repair was used. Results: All patients were followed up 12-33 months (mean, 23.8 months). MRI at 25-31 weeks postoperatively showed the 121 cases of rotator cuff healing and 31 cases of non healing. Univariate analysis showed that the disease duration, stump-preserving repair, shoulder joint abduction angle at knotting, and the time for patients to start postoperative active exercise were the influencing factors of rotator cuff healing ( P<0.05). Multivariate analysis showed that non-stump-preserving repair, shoulder abduction angle more than 45° at knotting, and the time to start active exercise within 3 months postoperatively were risk factors affecting rotator cuff healing ( P<0.05). A total of 51 pairs of cases were matched based on the grouping criteria of whether the disease duration exceeded 3 months, whether the shoulder abduction angle at knotting exceeded 45°, and whether the time to start postoperative active exercise exceeded 3 months. The rotator cuff healing rate, ASES score, and Constant-Murley score of the preserving repair group at 6 months postoperatively were superior to those of the non-preserving repair group, and the differences were significant ( P<0.05). There was no significant difference in ASES score and Constant-Murley score between the two groups at 12 months postoperatively ( P>0.05). Conclusion: For degenerative total rotator cuff tears, the stump-preserving repair can shorten the healing time and promote the shoulder function recovery, but has no significant effect on shoulder function at 1 year postoperatively.
Asunto(s)
Lesiones del Manguito de los Rotadores , Articulación del Hombro , Humanos , Femenino , Masculino , Persona de Mediana Edad , Manguito de los Rotadores/cirugía , Lesiones del Manguito de los Rotadores/cirugía , Hombro , Estudios Retrospectivos , Resultado del Tratamiento , Artroscopía/métodos , Articulación del Hombro/cirugía , Imagen por Resonancia Magnética , Rango del Movimiento ArticularRESUMEN
Unsatisfied tumor accumulation of chemotherapeutic drugs and a complicated immunosuppressive microenvironment diminish the immune response rate and the therapeutic effect. Surface modification of these drugs with target ligands can promote their cellular internalization, but the modified drugs may be subjected to unexpected immune recognition and clearance. Herein, a phenylboronic acid (PBA) group-shieldable dendritic nanomedicine that integrates an immunogenic cell death (ICD)-inducing agent (epirubicin, Epi) and an indoleamine 2,3-dioxgenase 1 (IDO1) inhibitor (NLG919) is reported for tumor chemo-immunotherapy. This NLG919-loaded Epi-conjugated PEGylated dendrimers bridged with boronate bonds (NLG919@Epi-DBP) maintains a stable nanostructure during circulation. Under a moderate acidic condition, the PBA group exposes to the sialic acid residue on the tumor cell membrane to enhance the internalization and penetration of NLG919@Epi-DBP. At pH 5.0, NLG919@Epi-DBP rapidly disassembles to release the incorporated Epi and NLG919. Epi triggers robust ICD of tumor cells that evokes strong immune response. In addition, inhibition of the IDO1 activity downregulates the metabolism of L-tryptophan to kynurenine, leading to a reduction in the recruitment of immunosuppressive cells and modulation of the tumor immune microenvironment. Collectively, this promising strategy has been demonstrated to evoke robust immune response as well as remodel the immunosuppressive microenvironment for an enhanced chemo-immunotherapeutic effect.
Asunto(s)
Nanomedicina , Neoplasias , Humanos , Epirrubicina/química , Neoplasias/terapia , Triptófano/química , Triptófano/metabolismo , Triptófano/farmacología , Inmunoterapia , Microambiente Tumoral , Línea Celular TumoralRESUMEN
Organic luminescent materials are indispensable in optoelectronic displays and solid-state luminescence applications. Compared with single-component, multi-component crystalline materials can improve optoelectronic characteristics. This work forms a series of full-spectrum tunable luminescent charge-transfer (CT) cocrystals ranging from 400 to 800 nm through intermolecular collaborative self-assembly. What is even more interesting is that o-TCP-Cor(x)-Pe(1-x), p-TCP-Cor(x)-Pe(1-x), and o-TCP-AN(x)-TP(1-x) alloys are prepared based on cocrystals by doping strategies, which correspondingly achieve the stepless color change from blue (CIE [0.22, 0.44]) to green (CIE [0.16, 0.14]), from green (CIE [0.27, 0.56]) to orange (CIE [0.58, 0.42]), from yellow (CIE [0.40, 0.57]) to red (CIE [0.65, 0.35]). The work provides an efficient method for precisely synthesizing new luminescent organic semiconductor materials and lays a solid foundation for developing advanced organic solid-state displays.
RESUMEN
Rational design of polymeric conjugates could greatly potentiate the combination therapy of solid tumors. In this study, we designed and prepared two polymeric conjugates (HT-DTX and PEG-YC-1), whereas the drugs were attached to the PEG via a linker sensitive to cathepsin B, over-expressed in TNBC. Stable nanostructures were formed by these two polymer prodrug conjugates co-assembly (PPCC). The stimuli-responsiveness of PPCC was confirmed, and the size shrinkage under tumor microenvironment would facilitate the penetration of PPCC into tumor tissue. In vitro experiments revealed the molecular mechanism for the synergistic effect of the combination of DTX and YC-1. Moreover, the systemic side effects were significantly diminished since the biodistribution of PPCC was improved after i.v. administration in vivo. In this context, the co-assembled nano-structural approach could be employed for delivering therapeutic drugs with different mechanisms of action to exert a synergistic anti-tumor effect against solid tumors, including triple-negative breast cancer. STATEMENT OF SIGNIFICANCE.
Asunto(s)
Antineoplásicos , Profármacos , Neoplasias de la Mama Triple Negativas , Humanos , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Antineoplásicos/química , Neoplasias de la Mama Triple Negativas/tratamiento farmacológico , Neoplasias de la Mama Triple Negativas/patología , Terapia Neoadyuvante , Distribución Tisular , Polímeros/química , Profármacos/química , Línea Celular Tumoral , Microambiente TumoralRESUMEN
Flexible electronic devices extended abilities of humans to perceive their environment conveniently and comfortably. Among them, flexible magnetic field sensors are crucial to detect changes in the external magnetic field. State-of-the-art flexible magnetoelectronics do not exhibit low detection limit and large working range simultaneously, which limits their application potential. Herein, a flexible magnetic field sensor possessing a low detection limit of 22 nT and wide sensing range from 22 nT up to 400 mT is reported. With the detection range of seven orders of magnitude in magnetic field sensor constitutes at least one order of magnitude improvement over current flexible magnetic field sensor technologies. The sensor is designed as a cantilever beam structure accommodating a flexible permanent magnetic composite and an amorphous magnetic wire enabling sensitivity to low magnetic fields. To detect high fields, the anisotropy of the giant magnetoimpedance effect of amorphous magnetic wires to the magnetic field direction is explored. Benefiting from mechanical flexibility of sensor and its broad detection range, its application potential for smart wearables targeting geomagnetic navigation, touchless interactivity, rehabilitation appliances, and safety interfaces providing warnings of exposure to high magnetic fields are explored.
RESUMEN
Neosalanx taihuensis is widely distributed in freshwater and brackish water areas in China. Due to its high commercial value, it has been artificially introduced into many lakes and reservoirs, showing strong ecological adaptability. Here, a gap-free chromosome-level reference genome was constructed by combining short reads, PacBio HiFi long reads, Nanopore ultralong reads and Hi-C data. The reference genome of N. taihuensis was 397.29 Mb with a contig N50 of 15.61 Mb. The assembled sequences were anchored to 28 chromosomes. Furthermore, 20,024 protein-coding genes and 98.16% of the predicted genes were annotated in publicly available biological databases. This high-quality gap-free assembled genome will provide an essential reference for studying the evolution and ecological adaptability of N. taihuensis.
Asunto(s)
Cromosomas , Peces , Genoma , China , Anotación de Secuencia Molecular , Filogenia , AnimalesRESUMEN
BACKGROUND: Maresin1 (MaR1) is a potent lipid mediator that exhibits significant anti-inflammatory activity in the context of several inflammatory diseases. A previous study reported that MaR1 could suppress MSU crystal-induced peritonitis in mice. To date, the molecular mechanism by which MaR1 inhibits MSU crystal-induced inflammation remains poorly understood. METHODS: Mousebone marrow-derived macrophages (BMDMs) were pretreated with MaR1 and then stimulated with FAs (palmitic, C16:0 and stearic, C18:0) plus MSU crystals (FAs + MSUc). In vivo, the effects of MaR1 treatment or Prdx5 deficiency on MSUc induced peritonitis and arthritis mouse models were evaluated. RESULTS: The current study indicated that MaR1 effectively suppressed MSUc induced inflammation in vitro and in vivo. MaR1 reversed the decrease in Prdx5 mRNA and protein levels induced by FAs + MSUc. Further assays demonstrated that MaR1 acceleratedPrdx5 expression by regulating the Keap1-Nrf2 signaling axis. Activation of AMPK by Prdx5 improved homeostasis of the TXNIP and TRX proteins and alleviated mitochondrial fragmentation. In addition, Prdx5 overexpression inhibited the expression of CPT1A, a key enzyme for fatty acid oxidation (FAO). Prdx5 protected against defects in FA + MSUc induced FAO and the urea cycle. CONCLUSION: MaR1 treatment effectively attenuated MSUc induced inflammation by upregulating Prdx5 expression. Our study provides a new strategy by which Prdx5 may help prevent acute gout attacks.
Asunto(s)
Peritonitis , Ácido Úrico , Ratones , Animales , Proteína 1 Asociada A ECH Tipo Kelch/metabolismo , Factor 2 Relacionado con NF-E2/metabolismo , Inflamación/metabolismoRESUMEN
Integrating nanomaterials into the polymer matrix is an effective strategy to optimize the performance of polymer-based piezoelectric devices. Nevertheless, the trade-off between the output enhancement and stability maintenance of piezoelectric composites usually leads to an unsatisfied overall performance for the high-strength operation of devices. Here, by setting liquid metal (LM) nanodroplets as the nanofillers in a poly(vinylidene difluoride) (PVDF) matrix, the as-formed liquid-solid/conductive-dielectric interfaces significantly promote the piezoelectric output and the reliability of this piezoelectric composite. A giant performance improvement featured is obtained with, nearly 1000% boosting on the output voltage (as high as 212 V), 270% increment on the piezoelectric coefficient (d33 â¼51.1 pC N-1 ) and long-term reliability on both structure and output (over 36 000 cycles). The design of a novel heterogenous interface with both mechanical matching and electric coupling can be the new orientation for developing high performance piezoelectric composite-based devices.
RESUMEN
Membrane fouling, wetting and scaling are three prominent challenges that severely hinder the practical applications of membrane distillation (MD). Herein, polyamide/polyvinylidene fluoride (PA/PVDF) Janus membrane comprising a hydrophobic PVDF substrate and a patterned dense PA layer by reverse interfacial polymerization (R-IP) was developed. Direct contact MD experiments demonstrated that PA/PVDF Janus membrane could exhibit simultaneously superior resistance towards surfactant-induced wetting, oil-induced fouling and gypsum-induced scaling without compromising flux. Importantly, the size-sieving effect, rather than the breakthrough pressure of the membrane, was revealed as the critical factor that probably endowed its resistance to wetting. Furthermore, a unique possible anti-scaling mechanism was unveiled. The superhydrophilic patterned dense PA layer with strong salt rejection capability not only prevented scale-precursor ions from intruding the substrate but also resulted in the high surface interfacial energy that inhibited the adhesion and growth of gypsum on the membrane surface, while its relatively low surface -COOH density benefited from R-IP process further ensured the membrane with a low scaling propensity. This study shall provide new insights and novel strategies in designing high-performance MD membranes and enable robust applications of MD facing the challenges of membrane fouling, wetting and scaling.
RESUMEN
BACKGROUND: Previous studies have revealed that Sirt3 deficiency is associated with several inflammatory responses. The purpose of this study is to investigate the role and potential molecular mechanisms of Sirt3 in the inflammation induced by monosodium urate (MSU) crystals. METHODS: The Sirt3 expression level in the peripheral blood mononuclear cells (PBMCs) of patients with gout was measured. Function and molecular mechanism of Sirt3 in MSU crystal-induced inflammation were investigated in bone marrow-derived macrophages (BMDMs), C57BL/6 mouse, and Sirt3-/- mouse. RESULTS: Sirt3 expression was decreased in the PBMCs of patients with gout. Sirt3 agonist (Viniferin) inhibited the acetylation levels of mitochondrial proteins including the SOD2 protein. RNA sequencing, bio-informatics analysis, RT-PCR, and Western blot demonstrated that Sirt3 could suppress the expression of Acod1 (Irg1), which plays an important role in gout. In BMDMs treated with palmitic acid (C16:0) plus MSU crystals, Acod1 knockdown repressed mitochondrial reactive oxygen species (mtROS) over-production, macrophage migration, and mitochondrial fragmentation, and Acod1 improved AMPK activity. The over-expression of Acod1 did not significantly affect the level of itaconic acid, but greatly decreased the levels of some important intermediate metabolites of the tricarboxylic acid (TCA) cycle. These data indicate that Acod1 exerts a pro-inflammatory role in MSU crystal-induced inflammation and is independent of the metabolic level of itaconic acid. Sirt3 deficiency exacerbates inflammatory response induced by MSU crystals in vitro and in vivo. CONCLUSION: The current study has shown that Sirt3 can alleviate the MSU crystal-induced inflammation by inhibiting the expression of Acod1.
Asunto(s)
Gota , Sirtuina 3 , Animales , Ratones , Gota/inducido químicamente , Gota/tratamiento farmacológico , Gota/metabolismo , Inflamación/inducido químicamente , Inflamación/metabolismo , Leucocitos Mononucleares/metabolismo , Ratones Endogámicos C57BL , Sirtuina 3/genética , Sirtuina 3/metabolismo , Ácido Úrico/toxicidadRESUMEN
Transition metal chalcogenides as potential anodes for lithium-ion batteries have been widely investigated. For practical application, the drawbacks of low conductivity and volume expansion should be further overcome. Besides the two conventional methods of nanostructure design and the doping of carbon-based materials, the component hybridization of transition metal-based chalcogenides can effectively enhance the electrochemical performance owing to the synergetic effect. Hybridization could promote the advantages of each chalcogenide and suppress the disadvantages of each chalcogenide to some extent. In this review, we focus on the four different types of component hybridization and the excellent electrochemical performance that originated from hybridization. The exciting problems of hybridization and the possibility of studying structural hybridization were also discussed. The binary and ternary transition metal-based chalcogenides are more promising to be used as future anodes of lithium-ion batteries for their excellent electrochemical performance originating from the synergetic effect.
RESUMEN
The degradation of AlGaN-based UVC LEDs under constant temperature and constant current stress for up to 500 hrs was analyzed in this work. During each degradation stage, the two-dimensional (2D) thermal distributions, I-V curves, optical powers, combining with focused ion beam and scanning electron microscope (FIB/SEM), were thoroughly tested and analyzed the properties and failure mechanisms of UVC LEDs. The results show that: 1) the opto-electrical characteristics measured before/during stress indicate that the increased leakage current and the generation of stress-induced defects increase the non-radiative recombination in the early stress stage, resulting in a decrease in optical power; 2) the increase of temperature caused by the deterioration of the Cr/Al layer of p-metal after 48 hrs of stress aggravates the optical power in UVC LEDs. The 2D thermal distribution in conjunction with FIB/SEM provide a fast and visual way to precisely locate and analyze the failure mechanisms of UVC LEDs.