RESUMEN
The copper-based metal-organic framework (MOF), CuBTC (where H3BTC = benzene-1,3,5-tricarboxylate), has been reported as a reusable heterogeneous catalyst for the Friedländer synthesis of substituted quinolines, which are desirable targets in the pharmaceutical industry. Because of this application, we further investigated the CuBTC-catalyzed Friedländer synthesis of 3-acetyl-2-methyl-4-phenylquinoline. CuBTC was synthesized in-house and used as a catalyst for the Friedländer synthesis. Fresh and used CuBTC were analyzed using scanning electron microscopy (SEM), powder X-ray diffraction (pXRD), and X-ray photoelectron spectroscopy (XPS). The used CuBTC shows structural breakdown in pXRD patterns and SEM images. Despite the structural breakdown, the desired product, 3-acetyl-2-methyl-4-phenylquinoline, is still produced in a moderate yield (76.3% ± 0.2), as confirmed via time-of-flight mass spectrometry and nuclear magnetic resonance spectroscopy. Inductively coupled plasma atomic emission spectroscopy of the recovered supernatant solution indicates the presence of copper(II) ions in solution. Thus, we hypothesized that the standard Friedländer conditions may degrade the CuBTC framework, resulting in copper(II) ions in solution. Control experiments with copper(II) from Cu(NO3)2·3H2O catalyzes the Friedländer reaction in yields (75.6% ± 0.1) equal to that of the CuBTC MOF. Overall, our findings suggest that CuBTC acts as a copper(II) source, and the copper(II) ions originating from the CuBTC MOF are responsible for the observed catalysis.
RESUMEN
We report the design of a blood-contacting glucose monitor with a nitric oxide (NO)-releasing metal-organic framework (MOF) embedded within the outer polymer layer of a glucose sensor to promote the release of NO from endogenous NO donors. The sensors were tested by using amperometry across a range of glucose concentrations to assess whether the presence of either the MOF or NO decreased the performance of the glucose monitor. Even though signal response was diminished, the sensors maintained a good regression fit (R2 = 0.9944) and a similar dynamic range and reproducibility in the presence of S-nitrosoglutathione.
Asunto(s)
Estructuras Metalorgánicas , Óxido Nítrico , Reproducibilidad de los Resultados , Donantes de Óxido Nítrico , GlucosaRESUMEN
The copper-based metal-organic framework (MOF) CuBTC (where H3BTC = benzene-1,3,5-tricarboxylate) has been shown to be an efficient heterogeneous catalyst for the generation of 1,8-dioxo-octa-hydro xanthene derivatives, which are valuable synthetic targets for the pharmaceutical industry. We have applied this catalytic capability of CuBTC to a continuous flow system to produce the open chain form of 3,3,6,6-tetramethyl-9-phenyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione, a xanthene derivative from benzaldehyde and dimedone. An acid work-up after producing the open chain form of the xanthene derivative was used to achieve ring closure and form the final xanthene product. The CuBTC used to catalyze the reaction under continuous flow was confirmed to be stable throughout this process via analysis by SEM, pXRD, and FT-IR spectroscopy, elemental analysis, and XPS. The reaction to produce the open-chain form of the xanthene derivative produced an average yield of 33% ± 14% under the continuous flow (compared to 33% ± 0.12% of performing it under batch conditions). Based on the data obtained from this work, the continuous flow system required 22.5x less time to produce the desired xanthene derivative at comparable yields to batch reaction conditions. These results would allow for the xanthene derivative to be produced much faster, at a lower cost, and require less personal time while also removing the need to perform catalyst remove post reaction.
RESUMEN
Device-induced thrombosis remains a major complication of extracorporeal life support (ECLS). To more thoroughly understand how blood components interact with the artificial surfaces of ECLS circuit components, assessment of clot deposition on these surfaces following clinical use is urgently needed. Scanning electron microscopy (SEM), which produces high-resolution images at nanoscale level, allows visualization and characterization of thrombotic deposits on ECLS circuitry. However, methodologies to increase the quantifiability of SEM analysis of ECLS circuit components have yet to be applied clinically. To address these issues, we developed a protocol to quantify clot deposition on ECLS membrane oxygenator gas transfer fiber sheets through digital and SEM imaging techniques. In this study, ECLS membrane oxygenator fiber sheets were obtained, fixed, and imaged after use. Following a standardized process, the percentage of clot deposition on both digital images and SEM images was quantified using ImageJ through blind reviews. The interrater reliability of quantitative analysis among reviewers was evaluated. Although this protocol focused on the analysis of ECLS membrane oxygenators, it is also adaptable to other components of the ECLS circuits such as catheters and tubing. Key features ⢠Quantitative analysis of clot deposition using digital and scanning electron microscopy (SEM) techniques ⢠High-resolution images at nanoscale level ⢠Extracorporeal life support (ECLS) devices ⢠Membrane oxygenators ⢠Blood-contacting surfaces Graphical overview.
RESUMEN
The controlled generation of nitric oxide (NO) from endogenous sources, such as S-nitrosoglutathione (GSNO), has significant implications for biomedical implants due to the vasodilatory and other beneficial properties of NO. The water-stable metal-organic framework (MOF) Cu-1,3,5-tris[1H-1,2,3-triazol-5-yl]benzene has been shown to catalyze the production of NO and glutathione disulfide (GSSG) from GSNO in aqueous solution as well as in blood. Previous experimental work provided kinetic data for the catalysis of the 2GSNO â 2NO + GSSG reaction, leading to various proposed mechanisms. Herein, this catalytic process is examined using density functional theory. Minimal functional models of the Cu-MOF cluster and glutathione moieties are established, and three distinct catalytic mechanisms are explored. The most thermodynamically favorable mechanism studied is consistent with prior experimental findings. This mechanism involves coordination of GSNO to copper via sulfur rather than nitrogen and requires a reductive elimination that produces a Cu(I) intermediate, implicating a redox-active copper site. The experimentally observed inhibition of reactivity at high pH values is explained in terms of deprotonation of a triazole linker, which decreases the structural stability of the Cu(I) intermediate. These fundamental mechanistic insights may be generally applicable to other MOF catalysts for NO generation.
Asunto(s)
Estructuras Metalorgánicas , Óxido Nítrico , Óxido Nítrico/química , S-Nitrosoglutatión , Cobre/farmacología , Disulfuro de Glutatión , Glutatión/química , CatálisisRESUMEN
Coating all portions of an extracorporeal membrane oxygenation (ECMO) circuit with materials exhibiting inherent, permanent antithrombotic properties is an essential step to prevent thrombus-induced complications. However, developing antithrombotic coatings for oxygenator fibers within membrane oxygenators of ECMO systems has proven challenging. We have used polydopamine (PDA) to coat oxygenator fibers and immobilize a Cu-based metal-organic framework (MOF) on the surface to act as a nitric oxide (NO) catalyst. Importantly, the PDA/MOF coating will produce NO indefinitely from endogenous S-nitrosothiols and it has not previously been applied to ECMO oxygenator fibers.
Asunto(s)
Estructuras Metalorgánicas , Óxido Nítrico , Proyectos Piloto , Fibrinolíticos , Oxigenadores de MembranaRESUMEN
BACKGROUND: Cannabis sativa L. also known as industrial hemp, is primarily cultivated as source material for cannabinoids cannabidiol (CBD) and ∆9-tetrahydrocannabinol (∆9-THC). Pesticide contamination during plant growth is a common issue in the cannabis industry which can render plant biomass and products made from contaminated material unusable. Remediation strategies to ensure safety compliance are vital to the industry, and special consideration should be given to methods that are non-destructive to concomitant cannabinoids. Preparative liquid chromatography (PLC) is an attractive strategy for remediating pesticide contaminants while also facilitating targeted isolation cannabinoids in cannabis biomass. METHODS: The present study evaluated the benchtop-scale suitability of pesticide remediation by liquid chromatographic eluent fractionation, by comparing retention times of 11 pesticides relative to 26 cannabinoids. The ten pesticides evaluated for retention times are clothianidin, imidacloprid, piperonyl butoxide, pyrethrins (I/II mixture), diuron, permethrin, boscalid, carbaryl, spinosyn A, and myclobutanil. Analytes were separated prior to quantification on an Agilent Infinity II 1260 high performance liquid chromatography with diode array detection (HPLC-DAD). The detection wavelengths used were 208, 220, 230, and 240 nm. Primary studies were performed using an Agilent InfinityLab Poroshell 120 EC-C18 3.0 × 50 mm column with 2.7 µm particle diameter, using a binary gradient. Preliminary studies on Phenomenex Luna 10 µm C18 PREP stationary phase were performed using a 150 × 4.6 mm column. RESULTS: The retention times of standards and cannabis matrices were evaluated. The matrices used were raw cannabis flower, ethanol crude extract, CO2 crude extract, distillate, distillation mother liquors, and distillation bottoms. The pesticides clothianidin, imidacloprid, carbaryl, diuron, spinosyn A, and myclobutanil eluted in the first 3.6 min, and all cannabinoids (except for 7-OH-CBD) eluted in the final 12.6 min of the 19-minute gradient for all matrices evaluated. The elution times of 7-OH-CBD and boscalid were 3.44 and 3.55 min, respectively. DISCUSSION: 7-OH-CBD is a metabolite of CBD and was not observed in the cannabis matrices evaluated. Thus, the present method is suitable for separating 7/11 pesticides and 25/26 cannabinoids tested in the six cannabis matrices tested. 7-OH-CBD, pyrethrins I and II (RTA: 6.8 min, RTB: 10.5 min), permethrin (RTA: 11.9 min, RTB: 12.2 min), and piperonyl butoxide (RTA: 8.3 min, RTB: 11.7 min), will require additional fractionation or purification steps. CONCLUSIONS: The benchtop method was demonstrated have congruent elution profiles using preparative-scale stationary phase. The resolution of pesticides from cannabinoids in this method indicates that eluent fractionation is a highly attractive industrial solution for pesticide remediation of contaminated cannabis materials and targeted isolation of cannabinoids.
RESUMEN
Medical devices that require substantial contact between blood and a foreign surface would be dramatically safer if constructed from materials that prevent clot formation and coagulation disturbance at the blood-biomaterial interface. Nitric oxide (NO), an endogenous inhibitor of platelet activation in the vascular endothelium, could provide anticoagulation at the blood-surface interface when applied to biomaterials. We investigated an application of a copper-based metal-organic framework, H3[(Cu4Cl)3(BTTri)8-(H2O)12]·72H2O where H3BTTri = 1,3,5-tris(1H-1,2,3-triazole-5-yl)benzene] (CuBTTri), which has been shown to be an effective catalyst to generate NO from S-nitrosothiols that are endogenously present in blood. A method was developed to apply a CuBTTri composite coating to Tygon medical tubing used for extracorporeal lung support devices. The stability and activity of the coating were evaluated during 72 h dynamic saline flow testing (1.5-2.5 L/min, n = 3) with scanning electron microscopy imaging and inductively coupled mass-spectroscopy analysis. Compatibility of the coating with whole blood was assessed with a panel of hemocompatibility tests during 6 h circulation of swine donor blood in an ex vivo circulation loop constructed with CuBTTri tubing or unmodified Tygon (1.5 L/min blood flow rate, n = 8/group). Thrombus deposition and catalytic activity of the CuBTTri tubing were assessed following blood exposure. The coating remained stable during 72 h saline flow experiments at clinically relevant flow rates. No adverse effects were observed relative to controls during blood compatibility testing, to include no significant changes in platelet count (p = 0.42), platelet activation indicated by P-selectin expression (p = 0.57), coagulation panel values, or methemoglobin fraction (p = 0.18) over the 6 h circulation period. CuBTTri within the coating generated NO following blood exposure in the presence of biologically relevant concentrations of an NO donor. CuBTTri composite coating was stable and blood compatible in this pilot study and requires further investigation of efficacy using in vivo models conducted with clinically relevant blood flow rates and study duration.
Asunto(s)
Estructuras Metalorgánicas , Trombosis , Animales , Materiales Biocompatibles , Estructuras Metalorgánicas/química , Estructuras Metalorgánicas/farmacología , Óxido Nítrico/química , Óxido Nítrico/metabolismo , Donantes de Óxido Nítrico , Proyectos Piloto , Porcinos , Trombosis/prevención & controlRESUMEN
Cannabinoids are important industrial analytes commonly assayed with high-pressure liquid chromatography (HPLC). In this study, we evaluate the suitability of MIL-53(Al), a commercially available metal-organic framework (MOF), as a stationary phase for cannabinoid separations. The suitability of an MOF for a given separation is hypothesized to be limited by the ability of a given molecule to enter the pore of the MOF. To evaluate the extent of possible adsorptive interactions between cannabinoids and the interior surface area of MIL-53(Al), the radii of gyration (Rg) and solvent-accessible surface areas were calculated for three cannabinoids, namely, cannabidiol, cannabinol, and Δ9-tetrahydrocannabinol, as well as the MOF. These values were used to calculate the theoretical adsorption capacity of the MOF, using four competing adsorption models. The Rg of cannabinoids (4.1 Å) is larger than one MOF pore aperture dimension (4.0 × 5.0 Å). The adsorption capacity was measured by relating a decrease in the cannabinoid concentration in acetonitrile when exposed to 100 mg of MOF. The cannabinoid uptake by the MOF was estimated using the relative standard deviation (RSD) of the soaking solution assay, as the decomposition-corrected RSD as uptake (DCRU). The DCRU was calculated as 0.007 ± 0.004 µgcannabinoids/mgMOF. These findings indicate that most of the MOF surface area was inaccessible for adsorption by cannabinoids due to size-exclusion effects. The implication of this work is that the suitability of an MOF for adsorptive separations, such as liquid chromatography, must have an upper limit for the size of the analyte. Additionally, MOFs may generally be more suitable for separations in the gas phase, where adsorbates are not hindered by the presence of a solvation shell.
Asunto(s)
Cannabinoides , Estructuras Metalorgánicas , Adsorción , Cromatografía Líquida de Alta Presión/métodos , Estructuras Metalorgánicas/químicaRESUMEN
Despite enormous advances in the detection and treatment of breast cancer, it still remains the leading cancer diagnosis and has the second highest mortality rate. Thus, breast cancer research is a high priority for academics and clinicians alike. Based on previous research indicating the potential of nitric oxide (NO) and SMYD-3 inhibition, this work sought to expand upon these concepts and combine the two approaches. Both NO (from S-Nitrosoglutathione (GSNO)), termed Group 1, and a combination therapeutic, inhibitor-4 (SMYD-3 inhibitor) plus NO (from GSNO), termed Group 2, were evaluated for their efficacy on breast carcinoma cell lines MCF7 and MDA-MB-231, and the normal MCF10A breast cell line, using cellular viability, colony formation capacity, cytotoxicity, and cellular apoptosis analysis. These results indicated that, in Group 1, breast carcinoma lines MCF7 and MDA-MB-231, cells experienced a moderate reduction in cellular viability (~20-25%), a large reduction in colony formation capacity (~80-90%), a moderate increase in the relative number of dead cells, and a moderate increase in cellular apoptosis. Group 2 was significantly more impactful, with a ~50% knockdown in cellular viability, a 100% reduction in colony formation capacity, a large increase in the relative number of dead cells, and a large increase in cellular apoptosis. Additionally, Group 2 induced a very small impact on the normal MCF10A cell line. Cumulatively, this work revealed the exciting impact of this combination therapeutic, indicating its potential for clinical application and further research.
RESUMEN
Proteoglycans (PGs) play many important roles in biology, contributing to the mechanical properties of tissues, helping to organize extracellular matrix components, and participating in signaling mechanisms related to mechanotransduction, cell differentiation, immune responses, and wound healing. Our lab has designed two different types of PG mimics: polyelectrolyte complex nanoparticles (PCNs) and PG-mimetic graft copolymers (GCs), both of which are prepared using naturally occurring glycosaminoglycans. This work evaluates the enzymatic stability of these PG mimics using hyaluronidases (I-S, IV-S, and II), chondroitinase ABC, and lysozyme, for PG mimics suspended in solution and adsorbed onto surfaces. Hyaluronan (HA)- and chondroitin sulfate (CS)-containing PG mimics are degraded by the hyaluronidases. PCNs prepared with CS and GCs prepared with heparin are the only CS- and HA-containing PG mimics protected from chondroitinase ABC. None of the materials are measurably degraded by lysozyme. Adsorption to polyelectrolyte multilayer surfaces protects PG mimics from degradation, compared to when PG mimics are combined with enzymes in solution; all surfaces are still intact after 21 days of enzyme exposure. This work reveals how the stability of PG mimics is controlled by both the composition and macromolecular assembly of the PG mimic and also by the size and specificity of the enzyme. Understanding and tuning these degradation susceptibilities are essential for advancing their applications in cardiovascular materials, orthopedic materials, and growth factor delivery applications.
Asunto(s)
Glicosaminoglicanos , Proteoglicanos , Sulfatos de Condroitina , Mecanotransducción Celular , PolielectrolitosRESUMEN
Herein, we establish a method to quantitatively monitor a metal-organic framework (MOF)-catalyzed, biomedically relevant reaction directly in blood plasma, specifically, the generation of nitric oxide (NO) from the endogenous substrate S-nitrosoglutathione (GSNO) catalyzed by H3[(Cu4Cl)3-(BTTri)8] (CuBTTri). The reaction monitoring method uses UV-vis and 1H NMR spectroscopies along with a nitric oxide analyzer (NOA) to yield the reaction stoichiometry and catalytic rate for GSNO to NO conversion catalyzed by CuBTTri in blood plasma. The results show 100% loss of GSNO within 16 h and production of 1 equiv. of glutathione disulfide (GSSG) per 2 equiv. of GSNO. Only 78 ± 10% recovery of NO(g) was observed, indicating that blood plasma can scavenge the generated NO before it can escape the reaction vessel. Significantly, to best apply and understand reaction systems with biomedical importance, such as NO release catalyzed by CuBTTri, methods to study the reaction directly in biological solvents must be developed.
RESUMEN
Several species of fungus from the genus Aspergillus are implicated in pulmonary infections in immunocompromised patients. Broad screening methods for fungal infections are desirable, as cultures require a considerable amount of time to provide results. Herein, we developed degradation and detection methods to produce and detect D-glucosamine (GlcN) from Aspergillus niger, a species of filamentous fungus. Ultimately, these techniques hold the potential to contribute to the diagnosis of pulmonary fungal infections in immunocompromised patients. In the following studies, we produced GlcN from fungal-derived chitin to serve as a marker for Aspergillus niger. To accomplish this, A. niger cells were lysed and subjected to a hydrochloric acid degradation protocol. Products were isolated, reconstituted in aqueous solutions, and analyzed using hydrophilic interaction liquid chromatography (HILIC) in tandem with electrospray ionization time-of-flight mass spectrometry. Our results indicated that GlcN was produced from A. niger. To validate these results, products obtained via fungal degradation were compared to products obtained from the degradation of two chitin polymers. The observed retention times and mass spectral extractions provided a two-step validation confirming that GlcN was produced from fungal-derived chitin. Our studies qualitatively illustrate that GlcN can be produced from A. niger; applying these methods to a more diverse range of fungi offers the potential to render a broad screening method for fungal detection pertinent to diagnosis of fungal infections.
Asunto(s)
Aspergilosis/diagnóstico , Aspergillus niger/aislamiento & purificación , Glucosamina/análisis , Enfermedades Pulmonares Fúngicas/diagnóstico , Aspergilosis/microbiología , Biomarcadores/análisis , Cromatografía Liquida/métodos , Glucosamina/normas , Humanos , Enfermedades Pulmonares Fúngicas/microbiología , Estándares de Referencia , Espectrometría de Masas en Tándem/métodosRESUMEN
When flowing whole blood contacts medical device surfaces, the most common blood-material interactions result in coagulation, inflammation, and infection. Many new blood-contacting biomaterials have been proposed based on strategies that address just one of these common modes of failure. This study proposes to mitigate unfavorable biological reactions that occur with blood-contacting medical devices by designing multifunctional surfaces, with features optimized to meet multiple performance criteria. These multifunctional surfaces incorporate the release of the small molecule hormone nitric oxide (NO) with surface chemistry and nanotopography that mimic features of the vascular endothelial glycocalyx. These multifunctional surfaces have features that interact with coagulation components, inflammatory cells, and bacterial cells. While a single surface feature alone may not be sufficient to achieve multiple functions, the release of NO from the surfaces along with their modification to mimic the endothelial glycocalyx synergistically improves platelet-, leukocyte-, and bacteria-surface interactions. This work demonstrates that new blood-compatible materials should be designed with multiple features, to better address the multiple modes of failure of blood-contacting medical devices.
Asunto(s)
Materiales Biocompatibles , Endotelio Vascular , Biomimética , Coagulación Sanguínea , Plaquetas , Propiedades de SuperficieRESUMEN
The most common extracranial solid tumor in childhood, paediatric neuroblastoma, is frequently diagnosed at advanced stages and identified as high risk. High risk neuroblastoma is aggressive and unpredictable, resulting in poor prognosis and only â¼40% five-year survival rates. Herein, nitric oxide (NO) delivered via the S-nitrosothiol, S-nitrosoglutathione (GSNO), is explored as an anticancer therapeutic in various neuroblastoma lines. After 24 h of treatment with GSNO, cell viability assays, as assessed by resazurin and MTT ((3-4,5-dimethylthiazol-2-yl)-2,5-diphyltetrazolium bromide), consistently identified a moderate, â¼13-29%, decrease in metabolic activity, colony formation assays revealed notably significant reduction of clonogenic activity, and cytotoxicity assays revealed a visibly significant reduction of total number of cells and live cells as well as an increase in number of dead cells in treated cells versus untreated cells. Thrillingly, RNA-sequence analysis provided highly valuable information regarding the differentially expressed genes in treated samples versus control samples as well as insight into the mechanism of action of NO as an anticancer therapeutic. Favorably, the collective results from these analyses exhibited tumoricidal, non-tumour promoting, and discriminatory characteristics, illuminating the feasibility and significance of NO as a cytotoxic adjuvant in neuroblastoma treatment.
RESUMEN
The metal-organic framework (MOF) H3[(Cu4Cl)3-(BTTri)8, H3BTTri = 1,3,5-tris(1H-1,2,3-triazol-5-yl)benzene] (CuBTTri) is a precatalyst for biomedically relevant nitric oxide (NO) release from S-nitrosoglutathione (GSNO). The questions of the number and nature of the catalytically most active, kinetically dominant sites are addressed. Also addressed is whether or not the well-defined structural geometry of MOFs (as solid-state analogues of molecular compounds) can be used to generate specific, testable hypotheses about, for example, if intrapore vs exterior surface metal sites are more catalytically active. Studies of the initial catalytic rate vs CuBTTri particle external surface area to interior volume ratio show that intrapore copper sites are inactive within the experimental error (≤1.7 × 10-5% of the observed catalytic activity)-restated, the traditional MOF intrapore metal site catalysis hypothesis is disproven for the current system. All observed catalysis occurs at exterior surface Cu sites, within the experimental error. Fourier transform infrared (FT-IR) analysis of CN--poisoned CuBTTri reveals just two detectable Cu sites at a ca. ≥0.5% detection limit, those that bind three or one CN- ("Cu(CN)3" and "CuCN"), corresponding to the CN- binding expected for exterior surface, 3-coordinate (Cusurface) and intrapore, 5-coordinate (Cupore) sites predicted by the idealized, metal-terminated crystal structure. Two-coordinate Cu defect sites are ruled out at the ≥0.5% FT-IR detection limit as such defect sites would have been detectable by the FT-IR studies of the CN--poisoned catalyst. Size-selective poisoning studies of CuBTTri exterior surface sites reveal that 1.3 (±0.4)% of total copper in 0.6 ± 0.4 µm particles is active. That counting of active sites yields a normalized turnover frequency (TOF), TOFnorm = (4.9 ± 1.2) × 10-2 mol NO (mol Cusurface)-1 s-1 (in water, at 20 min, 25 °C, 1 mM GSNO, 30% loss of GSNO, and 1.3 ± 0.4 mol % Cusurface)-a value â¼100× higher than the TOF calculated without active site counting. Overall, Ockham's razor interpretation of the data is that exterior surface, Cusurface sites are the catalytically most active sites present at a 1.3 (±0.4)% level of total Cu.
RESUMEN
The beneficial effects provided by chitosan oligosaccharides (COS) make them of interest in medical research. The monomers that constitute COS confer distinct properties, so controlling COS composition during their production is significant. In this work, we degraded chitin and chitosan polymers and identified low molecular weight products such as COS that formed, using electrospray ionization time-of-flight mass spectrometry. Our results show that hydrochloric acid, hydrogen peroxide, and nitrous acid generate distinct products from chitin and chitosan. Hydrochloric acid degrades chitin and chitosan to produce glucosamine (GlcN) monomers and oligomers. Hydrogen peroxide degrades chitosan to produce GlcN and N-acetyl-d-glucosamine (GlcNAc) monomers and oligomers, and nitrous acid degrades chitosan to produce 2,5-anhydro- d-mannose. Our studies show that COS composition is dictated by both the degradation protocol and the starting polymer. Additionally, our results enable selection of degradation protocols based on their ability to degrade chitin and chitosan and facilitate the production of COS with desired compositions.
Asunto(s)
Quitina/química , Quitosano/química , Conformación de Carbohidratos , Peso Molecular , Espectrometría de Masa por Ionización de Electrospray , Factores de TiempoRESUMEN
Neuroblastoma, the most common extracranial solid tumor in children, accounts for 15% of all pediatric cancer deaths. Pharmaceutical applications of S-Nitrosylation, which, under normal conditions is involved with a host of epigenetic and embryological development pathways, have exhibited great potential for use as adjuvant therapeutics in the clinical management of cancer. Herein, an evaluation of the impact of nitric oxide (NO) as a potent anticancer agent on murine neuroblastoma cells is presented. Excitingly cell viability, colony formation, and non-carcinogenic cell analysis illustrate the significance and practicality of NO as a cytotoxic anticancer therapeutic. Resazurin, WST-8 (2-(2-methoxy-4-nitrophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium, monosodium salt), and MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphyltetrazolium bromide) assays consistently displayed a moderate, ~20-25% reduction in cell viability after exposure to 1 mM S-Nitrosoglutathione (GSNO). A colony formation assay demonstrated that treated cells no longer exhibited colony formation capacity. Identically GSNO-treated Adult Human Dermal Fibroblasts (HDFa) exhibited no decrease in viability, indicating potential discrimination between neoplastic and normal cells. Collectively, our findings indicate a potential application for NO as an adjuvant therapeutic in the clinical management of neuroblastoma.
RESUMEN
Thermogravimetric analysis (TGA) is a technique which can probe chemisorption of substrates onto metal organic frameworks. A TGA method was developed to examine the catalytic oxidation of S-nitrosoglutathione (GSNO) by the MOF H3[(Cu4Cl)3(BTTri)8] (abbr. Cu-BTTri; H3BTTri = 1,3,5-tris(1H-1,2,3-triazol-5-yl)benzene), yielding glutathione disulfide (GSSG) and nitric oxide (NO). Thermal analysis of reduced glutathione (GSH), GSSG, GSNO, and Cu-BTTri revealed thermal resolution of all four analytes through different thermal onset temperatures and weight percent changes. Two reaction systems were probed: an aerobic column flow reaction and an anaerobic solution batch reaction with gas agitation. In both systems, Cu-BTTri was reacted with a 1 mM GSH, GSSG, or GSNO solution, copiously rinsed with distilled-deionized water (dd-H2O), dried (25 °C, < 1 Torr), and assessed by TGA. Additionally, stock, effluent or supernatant, and rinse solutions for each glutathione derivative within each reaction system were assessed by mass spectrometry (MS) to inform on chemical transformations promoted by Cu-BTTri as well as relative analyte concentrations. Both reaction systems exhibited chemisorption of glutathione derivatives to the MOF by TGA. Mass spectrometry analyses revealed that in both systems, GSH was oxidized to GSSG, which chemisorbed to the MOF whereas GSSG remained unchanged during chemisorption. For GSNO, chemisorption to the MOF without reaction was observed in the aerobic column setup, whereas conversion to GSSG and subsequent chemisorption was observed in the anaerobic batch setup. These findings suggest that within this reaction system, GSSG is the primary adsorbent of concern with regards to strong binding to Cu-BTTri. Development of similar thermal methods could allow for the probing of MOF reactivity for a wide range of systems, informing on important considerations such as reduced catalytic efficiency from poisoning, recyclability, and loading capacities of contaminants or toxins with MOFs.
Asunto(s)
Estructuras Metalorgánicas , Glutatión , Espectrometría de Masas , Óxido Nítrico , Oxidación-Reducción , S-NitrosoglutatiónRESUMEN
Bacterial infections occurring on medical devices are incredibly difficult to treat, highlighting the urgency for progress in developing antibiotics and antibacterial materials. This work describes the preparation of an antibacterial prodrug polymer composite material for use as an antibacterial coating for medical devices to prevent infections. Polyvinyl chloride and polyurethane films are prepared containing a bacterial nitroreductase enzyme-activated diazeniumdiolate that releases nitric oxide (NO), a known potent antimicrobial agent. Characterization of the surface of the composite materials by scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDS) reveals that the surface of the materials is composed of high amounts of nitrogen due to incorporation of the NO donor compound, up to 13.2% nitrogen on the surface of the 2.5% w/v diazeniumdiolate composite. NO release from the composite films is observed only after metabolism by a bacterial nitroreductase enzyme isolated from E. coli, demonstrating the prodrug nature of the polymer composite materials. Antibacterial efficacy experiments resulted in up to a 66% reduction in E. coli after exposure to the diazeniumdiolate-composite materials. This work details the first illustration of an antibacterial enzyme-activated NO-releasing polymer, a material with potential application as a medical device coating to prevent device-associated infections and improve patient outcomes.