Association of Periodontitis with Oral Cancer: A Case-Control Study.

The association between oral squamous cell carcinoma (OSCC) and periodontitis in large hospital cases with cohort controls has yet to be evaluated. The aim of this study was to investigate the association of periodontitis with OSCC across tumor location and tumor-node-metastasis (TNM) stage among Koreans ( N = 424). OSCC cases ( n = 146) were recruited from Seoul National University Dental Hospital and matched by age, sex, and smoking to controls ( n = 278) from the Yangpyeong health and periodontal cohort in Korea. OSCC was diagnosed through biopsy and radiographs, including computed tomography and magnetic resonance imaging. Tumor location and TNM stage were classified after the surgery. Periodontitis was defined by alveolar bone loss with panoramic radiographs following the guidelines of the Fifth European Workshop in Periodontology. Alcohol intake, education, physical activity, obesity by body mass index, hypertension by blood pressure, diabetes by plasma glucose, and hypercholesterolemia by plasma cholesterol were considered as confounders. Information about age, sex, smoking, alcohol intake, education, and physical activity was obtained through interview; body mass index and blood pressure, through physical examination; and preoperative glucose and cholesterol, through laboratory tests. Bivariate analysis was applied with Fisher's exact chi-square test. Multivariable conditional logistic regression models were applied to evaluate the adjusted association of periodontitis with OSCC after controlling for confounders. Subgroup analyses were explored by OSCC and periodontitis. Participants with periodontitis were 3.7 times more likely to have OSCC (adjusted odds ratio [aOR] = 3.66, 95% CI = 1.46 to 9.23) than participants without periodontitis. The differences in periodontitis were not statistically significant across TNM stages of OSCC ( P > 0.05) and its location ( P > 0.05). The link was highlighted among males (aOR = 6.55), elders aged >60 y (aOR = 4.98), and those with more tooth loss (aOR = 9.99). Our data showed that periodontitis was independently associated with OSCC. Thus, the risk of OSCC could be modulated by reducing periodontitis.

In-vivo-induced antigenic determinants of Fusobacterium nucleatum subsp. nucleatum.

Fusobacterium nucleatum plays a pivotal role in dental plaque biofilm formation and is known to be involved in chronic inflammatory systemic disease. However, limited knowledge of F. nucleatum genes expressed in vivo interferes with our understanding of pathogenesis. In this study, we identified F. nucleatum genes induced in vivo using in-vivo-induced antigen technology (IVIAT). Among 30,000 recombinant clones screened, 87 reacted reproducibly with pooled sera from 10 patients with periodontitis. The clones encoded for 32 different proteins, of which 28 could be assigned to their functions, which were categorized in translation, transcription, transport, energy metabolism, cell envelope, cellular process, fatty acid and phospholipid metabolism, transposition, cofactor biosynthesis, amino acid biosynthesis, and DNA replication. Putative virulence factors detected were ABC transporter, butyrate-acetoacetate CoA-transferase, hemin receptor, hemolysin, hemolysin-related protein, LysR family transcriptional regulator, serine protease, and transposase. Analysis of immune responses to the in-vivo-induced (ivi) antigens in five patients demonstrated that most were reactive to these proteins, confirming results with pooled sera. IVIAT-identified F. nucleatum genes in this study may accelerate the elucidation of F. nucleatum-mediated molecular pathogenesis.

A 3-year prospective radiographic evaluation of marginal bone level around different implant systems.

The aim of this study was to evaluate the change of marginal bone level radiographically around three different implant systems after 3 years in function. Fifty-four patients were included and randomly assigned to three treatment groups of rough-surface implants (TiUnite, n = 37), hybrid of smooth and rough-surface implants (Restore, n = 38) and rough surface with microthread implants (Hexplant, n = 45). Clinical and radiographic examinations were conducted at the time of implant loading (baseline), 1 and 3 years after loading. A three-level mixed-effect analysis of covariance (ancova) was used to test the significance of the mean marginal bone change of the three implant groups. A total 120 of 135 implants completed the study. None of the implants failed to integrate. Significant differences were noted in the marginal bone loss recorded for the three groups (P < 0.0001). At 3 years, the rough surface with microthread implants had a mean crestal bone loss of 0.59 +/- 0.30 mm; the rough-surface implants, 0.95 +/- 0.27 mm; and the hybrid surface implants, 1.05 +/- 0.34 mm. Within the limitations of this study, rough-surface implants with microthread at the coronal part might have a long-term positive effect in maintaining the marginal bone level against functional loading in comparison with implants without these two features.

Marginal bone loss around three different implant systems: radiographic evaluation after 1 year.

This study was designed to radiographically evaluate the effect of surface macro-and microstructures within the coronal portion of the external hex implant at the marginal bone change after loading. The fifty-four patients included in the study were randomly assigned to treatment groups with rough-surface implants (TiUnite, n = 45), a hybrid of smooth and rough surface implants (Restore, n = 45) or rough-surface with microthreads implants (Hexplant, n = 45). Clinical and radiographic examinations were conducted at the time of implant loading (baseline) and at 1-year post-loading. A three-level mixed-effect ancova was used to test the significance of the mean marginal bone change of the three implant groups from baseline to 1-year follow-up. At 1-year, significant differences were noted in marginal bone loss recorded for the three groups (P < 0.0001). The rough surface with microthread implants had a mean crestal bone loss of 0.42 +/- 0.27 mm; the rough surface implants, 0.81 +/- 0.27 mm; and the hybrid surface implants, 0.89 +/- 0.41 mm. Within the limitations of this study, a rough surface with microthreads at the coronal part of implant maintained the marginal bone level against functional loading better than implants without these two features.

Effects of implant geometry and surface treatment on osseointegration after functional loading: a dog study.

The purpose of this study was to evaluate the geometry and surface characteristics of osseointegration after functional loading by radiographic, periodontal and histomorphometric analyses. We analysed three groups of implants with different geometry and surface characteristics using experimental dogs. The control group received Brånemark implants (group 1). Group 2 and group 3 implants each had a 0.5-mm pitch height but differed in surface characteristics. Group 2 implants were machine surfaced and group 3 implants were thermally oxidized at 800 degrees C for 2 h in a pure oxygen atmosphere. For these experiments, which used a total of four healthy beagle dogs, the implants were randomly installed into the extracted first, second and third premolar positions. The animals received radiographic and clinical periodontal examinations at 6 and 12 months post-loading, and were then killed for histomorphometric analysis. The radiographic analysis showed that mean crestal bone resorption in the control group was greater than that observed in the experimental groups (P < 0.05). The percentage of bone-to-implant contact for group 3 (83.7%) was significantly higher than in groups 1 (74.4%) and 2 (75.0%) (P < 0.05). Overall, implant geometry and surface treatment affected the rate of crestal bone resorption and bone healing surrounding the dental implants.

Evaluation of design parameters of osseointegrated dental implants using finite element analysis.

Finite element analyses were performed for various shapes of dental implant to study effects on stress distribution generated in the surrounding jaw bone and to determine an optimal thread shape for even stress distribution. It was found that the square thread shape filleted with a small radius was more effective on stress distribution than other dental implants used in the analyses. Additional analyses were performed on the implant with the thread shape obtained from previous analyses for varying other design parameters, such as the width of thread end and height of thread for various load directions, to determine the optimal dimensions of the implant. Stress distribution was more effective in the case when the width of thread end and the height of thread were 0.5p and 0.46p, respectively, where p is the screw pitch. Then, using the optimal implant thread dimensions determined previously, stress analyses were performed with various screw pitches and implant lengths, to investigate effects on stress distribution and to find the way to reduce the maximum effective stress generated in the jaw bone. Results show that the maximum effective stress decreased not only as screw pitch decreased gradually but also as implant length increased.

Tissue-engineered growth of bone by marrow cell transplantation using porous calcium metaphosphate matrices.

In this study we investigated not only osteoblastic cell proliferation and differentiation on the surface of calcium metaphosphate (CMP) matrices in vitro but also bone formation by ectopic implantation of these cell-matrix constructs in athymic mice in vivo. Interconnected porous CMP matrices with pores 200 microm in size were prepared to use as scaffolds for rat-marrow stromal-cell attachment. Cell-matrix constructs were cultured in vitro, and cell proliferation and ALPase activities were monitored for 56 days. In addition to their being cultured in vitro, cell-matrix constructs were implanted into subcutaneous sites of athymic mice. In vitro these porous CMP matrices supported the proliferation of osteoblastic cells as well as their differentiation, as indicated by high ALPase activity. In vivo the transplanted marrow cells gave rise to bone tissues in the pores of the CMP matrices. A small amount of woven bone formation was detected first at 4 weeks; osteogenesis progressed vigorously with time, and thick lamellar bones that had been remodeled were observed at 12 weeks. These findings demonstrate the potential for using a porous CMP matrix as a biodegradable scaffold ex vivo along with attached marrow-derived mesenchymal cells for transplantation into a site for bone regeneration in vivo.

Formation of the biologic width following crown lengthening in nonhuman primates.

The purpose of this study was to determine if and how the biologic width is reestablished following surgical crown lengthening. Crown-lengthening surgery was performed on the right or left maxillary and mandibular central and lateral incisors of three adult monkeys, with contralateral teeth serving as unoperated controls. Twelve weeks after surgery, tissue blocks were removed for histologic analysis. The results of a histometric evaluation indicate that the biologic width is reestablished following surgical crown lengthening. The junctional epithelium generally migrates to the apical level of root planing. Space for the supracrestal connective tissue fiber groups is created by crestal resorption of alveolar bone.

Clinical and microbiological effects of minocycline-loaded microcapsules in adult periodontitis.

Clinical and microbiological effects of subgingival delivery of 10% minocycline-loaded (MC), bioabsorbable microcapsules were examined in 15 adult periodontitis patients. Patients received oral hygiene instruction 2 weeks prior to the study. At baseline (day 0) all teeth received supragingival scaling (SC); 2 quadrants received no further treatment and 1 quadrant received subgingival scaling and root planning (SRP). In the fourth quadrant, the tooth with the deepest probing sites (at least 1 site > or = 5 mm) was treated with minocycline microcapsules. The sites were evaluated at baseline and weeks 1, 2, 4, and 6. Clinical indices included bleeding on probing (BOP), probing depths (PD), and attachment loss (AL). Microbiological evaluations included percent morphotypes by phase-contrast microscopy; cultivable anaerobic, aerobic, and black-pigmented Bacteroides (BPB); and percent Porphyromonas gingivalis, Prevotella intermedia, Eikenella corrodens, and Actinomyces viscosus by indirect immunofluorescence. In the SC + MC group, BOP, PD, and AL were significantly reduced from baseline for weeks 1 to 6. BOP in the SC + MC group was significantly reduced compared to the SRP group from weeks 2 to 6. In the SC + MC group the percent of spirochetes and motile rods decreased and the percent of cocci increased after 1 week. The increased cocci and decreased motile rods were statistically greater at weeks 4 and 6 in the SC + MC group compared to the SRP group. This study demonstrates that local subgingival delivery of 10% minocycline-loaded microcapsules as an adjunct to scaling results in reduction in the percent sites bleeding on probing greater than scaling and root planning alone and induces a microbial response more favorable for periodontal health than scaling and root planing.