Correlation between Implant Surface Roughness and Implant Stability: A Systematic Review.

The aim of this study was to find in the literature data on the relationship between implant surface roughness and implant stability achieved, from the time of placement to three months afterward, to help us to know what type of surface roughness is more favorable to guarantee implant stability and osseointegration. A systematic review was conducted in accordance with the PRISMA 2020 (Preferred Reporting Items for Systematic Review and Meta-analysis) statement, and the protocol was registered on the Open Science Framework. The specific inclusion and exclusion criteria were selected using the PICOS framework. The databases Medline (PubMed), Scopus, the Web of Science and The Cochrane Library were searched up to October 2023. The selection of studies and data extraction were conducted by two independent reviewers. The review included a total of 11 studies. A total of 1331 dental implant placements were identified. Two of the eleven selected studies were on humans in vivo, eight were on animals in vivo, and one was on animals in vitro. A statistically significant correlation between surface roughness and implant stability as measured by resonance frequency analysis (RFA) was not identified in ten of the eleven selected studies. It appears that there is no correlation between primary stability and the degree of implant roughness. However, there appears to be a correlation between the roughness of the implant and the degree of osseointegration, as indicated by bone-implant contact values. This correlation is more closely related to secondary stability. The great methodological variability makes it difficult to compare data and draw conclusions, so it would be desirable to agree on a common methodology to help draw appropriate conclusions from published studies.

Prospective observational cohort study of the change of the marginal bone crest in relation to the prosthetic abutment height and the peri-implant vertical mucosal thickness at implants positioned subcrestally.

AIM: To evaluate the influence on peri-implant crestal bone loss exerted by the vertical mucosal thickness and the abutment height over 12 months after placement of the restoration on subcrestal implants with change of platform, using a restoration abutment platform smaller than the implant platform. MATERIALS AND METHODS: A total of 99 implants were rehabilitated in the maxillary and mandibular posterior regions. A total of 22 implants were rehabilitated in the maxilla and 77 implants in the mandible, using digitally designed customized abutments with Atlantis weborder software, from the commercial house Dentsply Sirona (Dentsply Sirona S.A., Barcelona, Spain), version 4.6.5, adapting the height to the vertical thickness of the mucosa. Clinical and radiographic monitoring begins during the surgical procedure of placement of the implant and ends 12 months afterwards. Crestal bone loss was evaluated through the Carestream® CS8100 3D radiographic equipment. RESULTS: In all cases, the greatest loss of marginal bone occurred between the day of surgery (Tx) and placement of the rehabilitation (To). The average bone loss between both times was greater when the abutment height and vertical mucosal thickness did not exceed 3 mm. Subsequently, bone loss slowed and stabilized at 12 months. CONCLUSIONS: The minimum abutment height and the vertical mucosal thickness are factors to take into account when minimizing peri-implant marginal bone loss, the abutment height having the greatest importance according to the clinical data obtained.

Efficacy of different surgical techniques for peri-implant tissue preservation in immediate implant placement: a systematic review and meta-analysis.

INTRODUCTION: Preserving peri-implant tissues after immediate implant placement (IIP), especially in aesthetic zones, is a topic of interest. OBJECTIVES: This systematic review investigated the effects of currently available surgical procedures for preserving peri-implant tissue or ensuring dimensional stability following immediate implant placement. MATERIALS AND METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement's guidelines were followed, and articles were sought on the PubMed and Cochrane databases with no date restrictions. Only randomised clinical trials that evaluated changes in soft and hard tissues around immediately placed implants were included. Statistical analyses were performed, and the studies´ quality was assessed using the Cochrane Collaboration tool. The agreement between reviewers was assessed based on Cohen's kappa statistics. RESULTS: Of the 14 studies that met the inclusion criteria, 11 were analysed in the meta-analysis (kappa = 0.814; almost perfect agreement). The use of connective tissue grafts resulted in a significantly greater improvement of the facial gingival level (MD = -0.51; 95% CI: -0.76 to -0.31; p = < .001), and the placement of bone grafts significantly reduced the horizontal resorption of the buccal bone (MD = -0.59; 95% CI: -0.78 to -0.39; p < .001). CONCLUSION: Connective tissue grafts and bone grafts positively influence tissue preservation around immediately placed implants. Neither the flapless technique nor palatal implant positioning resulted in significant improvements to any of the investigated parameters. Additional longitudinal studies are required. CLINICAL RELEVANCE: This meta-analysis is useful for discerning the effects of soft tissue augmentation, bone grafting, the flapless technique, and palatal implant positioning on preserving peri-implant tissues after immediate implant placement.

Prophylaxis and antibiotic therapy in management protocols of patients treated with oral and intravenous bisphosphonates.

INTRODUCTION: Osteonecrosis of the jaw (MRONJ) linked to bisphosphonate treatment has specific characteristics that render its therapeutic management challenging for clinicians. Poor response to standard treatment makes it essential to take special precautions when treating this type of disease; therefore, antibiotic prophylaxis and/or antibiotic therapy have been proposed as effective and helpful tools in these situations. OBJECTIVES: This article seeks to assess published evidence in order to evaluate the different protocols used for antibiotic prophylaxis and/or antibiotic therapy in the general context of patients treated with bisphosphonates. MATERIAL AND METHODS: A literature review of the last 10 years was carried out in PubMed using the following keywords: "antibiotic prophylaxis and osteonecrosis," "bisphosphonates AND osteonecrosis AND dental management," "bisphosphonate AND osteonecrosis AND antibiotic prophylaxis AND oral surgery." A total of 188 articles were obtained, of which 18 were ultimately selected. RESULTS AND DISCUSSION: In patients treated with oral and intravenous bisphosphonates without chemotherapy-associated osteonecrosis of the jaw, antibiotic prophylaxis prior to oral surgery is an important tool to avoid osteonecrosis and promote healing of the affected area. If the patient previously exhibited chemotherapy-associated osteonecrosis after tooth extraction, antibiotic prophylaxis is indicated to prevent recurrent osteonecrosis and promote healing of the extraction site. If chemotherapy-associated osteonecrosis is already present, antibiotic therapy is a vital part of conservative management to reduce the symptomatology of MRONJ and keep it from worsening. Finally, a lack of clinical data and randomized controlled trials makes it difficult to choose the most appropriate protocol for the various clinical situations studied. Key words:Bisphosphonates, antibiotic prophylaxis, maxillary osteonecrosis, antibiotic treatment.

Maxillary peripheral keratocystic odontogenic tumor. A clinical case report.

The keratocystic odontogenic tumor is a benign odontogenic cystic neoplasia characterized by its thin, squamous epithelium with superficial parakeratosis. It has the potential for infiltration and local aggressiveness and has a high rate of recurrence. This neoplasia is predominantly found in males and people of white origin. The mandible is the most frequently involved site, in particular the third molar region, mandibular angle, and ramus. It has a mandible-maxilla ratio of 2:1. Only about twenty cases of peripheral keratocystic odontogenic tumors (PKCOT) have been reported in the international literature. This study presents a case of PKCOT localized in the anterior region of the maxilla, on the vestibular side of the upper left lateral incisor and the upper left canine. The diagnosis and treatment procedures, as based on the literature, are also discussed. Key words:Odontogenic cysts, odontogenic tumors, keratocyst, keratocystic odontogenic tumor.

Flapless implant surgery: A review of the literature and 3 case reports.

Since the 1970s, modern Implantology is based on a concept of surgery with flap elevation. Gradually, several clinical trials demonstrated that a mid-crestal incision gives similar success rates compared to those obtained using the classical protocol. However, over the past decade in medicine it has been established the concept of minimally invasive surgery, consisting in taking advantage of advancements experienced in diagnostic techniques and specific surgical instruments, to perform surgical procedures infringing as less damage as possible to the patient The present work aims to produce a thorough review of the literature published on the field of Implantology with flapless surgery, to determine the current scientific evidence of the technique, along with illustrating the results with different clinical cases. After presenting the clinical cases, and the review of literature, we can say that flapless surgeries should be restricted to well-selected cases in which a proper clinical and radiological planning has been made. Patients treated with anticoagulant drugs or medically compromised equally can get benefitted by this minimal invasion technique. Key words:Flapless, minimally invasive surgery, dental implant.

Influence of two different machined-collar heights on crestal bone loss.

PURPOSE: The purpose of this trial was to evaluate crestal bone level changes radiographically in a standardized fashion over a period of 12 months in humans for implants with a 0.7-mm machined collar (implant type A) versus type B implants with a 1.5-mm machined collar. MATERIALS AND METHODS: Twenty-five patients with multiple missing teeth in posterior sectors were randomly assigned to one of the two groups: A (0.7-mm machined-collar implants) or B (1.5-mm machined-collar implants). Changes at crestal bone level were assessed by measuring the shoulder-crest distance (SCD) on the mesial and distal aspects of each implant on customized periapical radiographs, which were taken on the day of surgery and 3, 6, and 12 months after surgery. RESULTS: Eighty-one implants were included in the study. Mean SCD was 0.54 ± 0.53 mm at baseline and 1.49 ± 0.40 mm after 12 months. For 0.7-mm-collar implants, mean SCD was 1.40 ± 0.39 mm, while it was 1.56 ± 0.40 mm for 1.5-mm-collar implants. Statistically significant differences were found only between the two types of implants for distal measurements at 3 and 12 months after placement. CONCLUSION: Both 0.7- and 1.5-mm machined-collar implants can be used with predictable results, as changes in peri-implant crestal bone levels are similar for both implant types and do not seem to be significant from a clinical point of view. The SCD may well depend more on the location of the abutment-implant interface than on machined-collar height.

Assessment of Osstell ISQ’s reliability for implant stability measurement: A cross-sectional clinical study

Resonance frequency analysis (RFA) allows assess implant stability by measuring implant oscillation frequency on the bone. RFA is an objective and non-invasive method for implant stability measurement, although scarce evidence has been provided so far on its reliability. Objective: Assess the Osstell ISQ system's reliability (i.e., its measurement reproducibility and repeatability) by means of the intraclass correlation coefficient (ICC) as statistical method. Design of the study: Two implant stability registers were completed by means of Osstell ISQ on 85 implants on 23 patients. Six measurements were completed on each implant by means of two different SmartPegs (types I and II); that is, three consecutive measurements with each transducer. Results: Average ISQ was 72.40, 72.22 and 72.79, and 72.06, 72.59 and 72.82 in the first, second, and third measurements with SmartPegs I and II, respectively. Equal values or differences below three ISQ points were observed in 52.9% and 62.4% of the cases with SmartPegs I and II, respectively. The intraclass correlation coefficient was 0.97 for both SmartPegs, and repeatability and reproducibility also reached 0.97 for both SmartPegs. Conclusions: The RFA system Osstell ISQ presents almost perfect repeatability and reproducibility after intraclass correlation coefficient analysis. Osstell ISQ measurements are highly reliable regarding reproducibility. Therefore, one measurement proves enough

Assessment of Osstell ISQ's reliability for implant stability measurement: a cross-sectional clinical study.

UNLABELLED: Resonance frequency analysis (RFA) allows assess implant stability by measuring implant oscillation frequency on the bone. RFA is an objective and non-invasive method for implant stability measurement, although scarce evidence has been provided so far on its reliability. OBJECTIVE: Assess the Osstell ISQ system's reliability (i.e., its measurement reproducibility and repeatability) by means of the intraclass correlation coefficient (ICC) as statistical method. DESIGN OF THE STUDY: Two implant stability registers were completed by means of Osstell ISQ on 85 implants on 23 patients. Six measurements were completed on each implant by means of two different SmartPegs (types I and II); that is, three consecutive measurements with each transducer. RESULTS: Average ISQ was 72.40, 72.22 and 72.79, and 72.06, 72.59 and 72.82 in the first, second, and third measurements with SmartPegs I and II, respectively. Equal values or differences below three ISQ points were observed in 52.9% and 62.4% of the cases with SmartPegs I and II, respectively. The intraclass correlation coefficient was 0.97 for both SmartPegs, and repeatability and reproducibility also reached 0.97 for both SmartPegs. CONCLUSIONS: The RFA system Osstell ISQ presents almost perfect repeatability and reproducibility after intraclass correlation coefficient analysis. Osstell ISQ measurements are highly reliable regarding reproducibility. Therefore, one measurement proves enough.