RESUMEN
We report herein our attempt to synthesize an analog of indacenedithiophene (IDT) based on a tetraphenylhexyl substituted, covalently bridged syn-terthienyl unit. Instead of the expected compound the adopted synthetic route led to the formation of an unexpected, new naphtho[2,3-b]thiophene derivative. The structure of this compound was fully characterized by NMR and HRMS as well as single crystal X-ray diffraction and its electronic properties have been analyzed by UV-vis absorption spectroscopy and cyclic voltammetry. A possible mechanism for the formation of this compound is also proposed on the basis of detailed theoretical investigations.
RESUMEN
The self-rigidification of ionized π-conjugated systems based on two combinations of thiophene (T) and 3,4-Ethylenedioxythiophene (E) is investigated using mass-analyzed ion kinetic energy spectrometry (MIKES) of ions produced from electron impact ionization at 70 eV. The m/z 446 radical cations of the two isomers ETTE and TEET lead to detect m/z 418 and 390 daughter ions. The MIKE spectra differ only by the intensities of these fragment ions. As the m/z 418 daughter ion is produced through a same retro-Diels Alder reaction whatever the fragmenting isomer, the difference in daughter ion intensities is interpreted in term of unimolecular dissociation rate constants ( k( Eint)) ratios. Considering that the transition state (TS) of such reaction is attributed to a quinoid form, equivalent vibration modes are assumed for the TS of both dissociating ETTE and TEET radical cations. As a result, by using the Rice-Ramsperger-Kassel-Marcus (RRKM) theory, the difference in daughter ion intensities is interpreted by considering that the fragmenting ion is more or less ordered in its ground state than at the transition state, resulting from the influence of the number of the S O interactions in the planarization of the TEET ion toward the ETTE charged species. The comparison of this behavior in MIKES experiments is supported by the modeling of ion behavior in mass spectrometer and the calibration in internal energy of the radical cations produced in an EI source.
RESUMEN
This mini review aims at taking stock of some arylamine based push-pull chromophores developed in the "Systèmes Conjugués Linéaires" (SCL) group at the University of Angers. Selected examples highlight more than a decade of design principles and strategies implemented to afford simple and accessible soluble molecular donors as active material for organic solar cells (OSCs).
RESUMEN
Single material organic solar cells (SMOSCs) are based on ambivalent materials containing electron donor (D) and acceptor (A) units capable to ensure the basic functions of light absorption, exciton dissociation, and charge transport. Compared to bicomponent bulk heterojunctions, SMOSCs present several major advantages such as considerable simplification of cell fabrication and a strong stabilization of the morphology of the D/A interface, and thus of the cell lifetime. In addition to these technical issues, SMOSCs pose fundamental questions regarding the possible formation, and dissociation of excitons on the same molecular D-A architecture. SMOSCs are developed with various approaches, namely "double-cable" polymers, block copolymers, oligomers, and molecules that differ by the donor platform: polymer or molecule, the nature of A, the D-A connection, and the intra- and intermolecular interactions of D and A. Although for several years the maximum efficiency of SMOSCs has remained limited to 1.0-1.5%, impressive progress has been recently accomplished leading to SMOSCs with 4.0-5.0% efficiency. Here, recent advances in the synthesis of D-A materials for SMOSCs are presented in the broader context of the chemistry of organic photovoltaic materials in order to discuss possible directions for future research.
RESUMEN
The synthesis of a molecule constituted of two diarylamine-based push-pull chromophores covalently linked via their nitrogen atom is described. Comparison of the electronic properties with the parent monomer shows that dimerization has negligible influence on the electronic properties of the molecule but exerts a dramatic impact on the capacity of the material to self-reorganize. Application of thermal annealing to thin films induces the crystallization under original morphologies, a process accompanied by a partial bleaching of the absorption in the visible range and by a huge increase of hole-mobility. X-ray diffraction data on single crystals reveal the presence of π-stacked organization with a non-centrosymmetric co-facial arrangement of the dipoles which leads to intrinsic 2nd order bulk NLO properties of thin films as evidenced by second harmonic generation under 800 nm laser light. The implications of this thermally induced crystallization on the photovoltaic properties of the material are discussed on the basis of preliminary results obtained on simple bilayer organic solar cells.
RESUMEN
New indeno[1,2-c]pyran-3-ones bearing different substituents at the pyran moiety were synthesized and their photophysical properties were investigated. In solution all compounds were found to be blue emitters and the trans isomers exhibited significantly higher fluorescence quantum yields (relative to 9,10-diphenylanthracene) as compared to the corresponding cis isomers. The solid-state fluorescence spectra revealed an important red shift of λmax due to intermolecular interactions in the lattice, along with an emission-band broadening, as compared to the solution fluorescence spectra.
RESUMEN
A small push-pull molecule involving a diphenylamine substituted by an oligo-oxyethylene chain is described. The compound exhibits aggregation-induced emission with solvent-dependent emission wavelength. Spin-cast deep-red amorphous films rapidly self-reorganize into colorless crystalline films which exhibit mechanofluorochromism and aggregation-induced second-harmonic generation.
RESUMEN
The effects of replacing the phenyl rings of triphenylamine (TPA) by naphtyl groups are analysed on a series of push-pull molecules containing a 2-thienyl-dicyanovinyl acceptor group. UV-Vis absorption spectroscopy and cyclic voltammetry show that the introduction of one or two naphtyl groups in the structure has limited effects on the optical properties and energy levels of the molecule. On the other hand, the evaluation of the compounds as donor material in bi-layer solar cells with C60 as acceptor shows that the number and mode of linkage of the naphtyl groups exert a marked influence on the power conversion efficiency (PCE) of the cell. Two naphtyl groups lead to a decrease of PCE with respect to TPA, while a single naphtyl group produces opposite effects depending on the linking mode. Compared to TPA, an alpha-naphtyl group leads to a small decrease of PCE while in contrast a beta-naphtyl leads to a ~35% increase of PCE due to improved short-circuit current density (Jsc) and fill-factor. The determination of the hole-mobility of these two donors by the space-charge-limited current method shows that these effects are correlated with the higher hole-mobility of the ß-naphtyl compound.
RESUMEN
Donor-acceptor molecules (D-π-A) built by connecting a diphenylhydrazone block to a dicyanovinyl acceptor group via various thiophene-based π-conjugating spacers (1-5) were synthesized from mono- or dialdehydes by a simple metal-free procedure. Cyclic voltammetry and UV/Vis absorption spectroscopy show that the extension and/or increase of the donor strength of the spacer produces a decrease of the HOMO and LUMO energy level, a red shift of the absorption spectrum and an increase of the molecular absorption coefficient. Compared to solutions, the optical spectra of spin-cast thin films of compounds 1-3 show a broadening and red shift of the absorption bands, consistent with the formation of J-aggregates. In contrast the blue shift observed for the EDOT-containing compounds 4 and 5 suggests the presence of H-aggregates. Solution-cast and vacuum-deposited films of donors 1-5 were evaluated in solar cells with fullerene C60 as acceptor. A power-conversion efficiency among the highest reported for bilayer devices of basic configuration was obtained with compound 2. On the other hand, the results obtained with 4 and 5 suggest that the presence of EDOT in the structure can have deleterious effects on the organization and performances of the donor material.
RESUMEN
A series of push-pull molecules combining a diarylamine donor block with various electron-acceptor units through phenylthienyl (PT) and bithienyl (TT) π-conjugating spacers have been synthesized. Optical and electrochemical results, supported by theoretical calculations, show that the electronic properties of the molecules can be modulated by varying the strength of the acceptor group and/or the structure of the conjugating spacer. As a first evaluation of the potential of these compounds as donors in organic solar cells (OSC), simple planar heterojunction (PHJ) prototypes using fullerene C60 as electron acceptor have been fabricated. Most OSCs exhibit analogous photoconversion efficiencies in the 1.5-2 % range. Their characteristics are discussed in terms of structure-properties relationships.
RESUMEN
An overview of some recent developments of the chemistry of molecular donor materials for organic photovoltaics (OPV) is presented. Although molecular materials have been used for the fabrication of OPV cells from the very beginning of the field, the design of molecular donors specifically designed for OPV is a relatively recent research area. In the past few years, molecular donors have been used in both vacuum-deposited and solution-processed OPV cells and both fields have witnessed impressive progress with power conversion efficiencies crossing the symbolic limit of 10 %. However, this progress has been achieved at the price of an increasing complexity of the chemistry of active materials and of the technology of device fabrication. This evolution probably inherent to the progress of research is difficult to reconcile with the necessity for OPV to demonstrate a decisive economic advantage over existing silicon technology. In this short review various classes of molecular donors are discussed with the aim of defining possible basic molecular structures that can combine structural simplicity, low molecular weight, synthetic accessibility, scalability and that can represent possible starting points for the development of simple and cost-effective OPV materials.
RESUMEN
A small donor-acceptor molecule is synthesized in a two-step procedure involving reaction of N,N-diphenylhydrazine on 2,5-diformylthiophene and Knoevenagel condensation. Results of UV/Vis absorption spectroscopy and cyclic voltammetry show that replacement of the phenyl ring bridge of a reference compound 2 by an azo group produces a slight red-shift of λmax, an enhancement of the molecular absorption coefficient, and a decrease of the energy level of the frontier orbitals. A preliminary evaluation of the potentialities of compound 1 as donor material in a basic bilayer planar heterojunction cell of 28 mm(2) active area using C60 as acceptor gave a short-circuit current density of 6.32 mA cm(-2) and a power conversion efficiency of 2.07 %.
Asunto(s)
Suministros de Energía Eléctrica , Energía Solar , Tiofenos/química , Tiofenos/síntesis química , Técnicas de Química Sintética , Electroquímica , Tecnología Química VerdeRESUMEN
Donor-acceptor (D-π-A) systems that combine triarylamine donor blocks and dicyanovinyl (DCV) acceptor groups have been synthesized. Starting from the triphenylamine (TPA)-thiophene-DCV compound (1) as a reference system, various synthetic approaches have been developed for controlling the light-harvesting properties and energy levels of the frontier orbitals in this molecule. Thus, the introduction of methoxy groups onto TPA, the replacement of one phenyl ring of TPA by a thiophene ring, or the extension of the π-conjugating spacer group lead to the modulation of the HOMO level. On the other hand, the fusion of the DCV group onto the vicinal thiophene ring by an ortho-phenylene bridge allows for a specific fine-tuning of the LUMO level. The electronic properties of the molecules were analyzed by using UV/Vis spectroscopy and cyclic voltammetry and the compounds were evaluated as donor materials in basic bilayer planar heterojunction solar cells by using C60 as acceptor material. The relationships between the electronic properties of the donors and the performance of the corresponding photovoltaic devices are discussed. Bilayer planar heterojunction solar cells that used reference compound 1 and C70 afforded power-conversion efficiencies of up to 3.7 %.
RESUMEN
3-Fluoro-4-hexylthiophene has been prepared by a synthetic route involving perbromination of 3-hexylthiophene followed by protection of the 2- and 5-positions of thiophene by trimethylsilyl groups and bromine/fluorine exchange. As expected, 3-hexyl-4-fluorothiophene oxidizes at a higher potential than 3-hexylthiophene; however, all attempts to electropolymerize this new thiophenic monomer have remained unsuccessful. Three terthienyls containing 3-hexylthiophene, 3-fluoro-4-hexylthiophene, and 3-bromo-4-hexylthiophene as the median group have been synthesized and used as substrates for electropolymerization. The electronic properties of the starting terthienyls and the resulting polymers have been analyzed by cyclic voltammetry and UV-vis spectroscopy, and the effects of substitution of the median thiophene ring are discussed.
RESUMEN
A crown-ether dithiol quaterthiophene is synthesized and immobilized on gold surface by double covalent fixation. UV-vis spectroscopy and cyclic voltammetry show that the corresponding dithioester precursor can complex Pb(2+) in solution and that this property is maintained for monolayers of the dithiol on gold. Current-voltage measurements by eutectic GaIn drop contact on the monolayer show a significant increase (up to 1.6 × 10(3) times) of the current at low bias after Pb(2+) complexation.
RESUMEN
Donor-acceptor molecules with small chain extension have been synthesized and used as active material in organic solar cells. The effect of fusion of a phenyl group on the end dicyanovinylene acceptor is discussed.
RESUMEN
3-Alkoxy-4-cyanothiophene units are used as building block for the synthesis of conjugated donor-acceptor-donor (D-A-D) triads. The donor part consists of benzothienothiophene end groups associated with the alkoxy groups of the 3-alkoxy-4-cyanothiophene, while the central acceptor part is formed by combining the electron-withdrawing cyano group with thiophene or benzothiadiazole units.
RESUMEN
The hole transporting medium in solid-state dye-sensitized solar cells can be utilized to harvest sunlight. Herein we demonstrate that a triphenylamine-based dye, used as hole-transporting medium, contributes to the photocurrent in a squaraine-sensitized solid-state dye-sensitized solar cell. Steady-state photoluminescence measurements have been used to distinguish between electron transfer and energy transfer processes leading to energy conversion upon light absorption in the hole-transporting dye.
RESUMEN
Extended star-shaped conjugated systems consisting of dicyanovinyl electron-acceptor units connected to a triphenylamine core by means of thiophene (T), thienylenevinylene (TV), and bithiophene (BT) conjugating spacers have been synthesized. The analysis of the electronic properties of the molecules by UV-vis absorption spectroscopy, cyclic voltammetry, and theoretical calculations shows that the electronic properties of the systems depend on the length and rigidity of the conjugating spacer.
RESUMEN
Thiophene-based D-A-D π-conjugated systems containing triphenylamine end groups connected to a 1,1,4,4-tetracyanobuta-1,3-diene acceptor by oligothiophene chains of variable length have been synthesized. These compounds show interesting light-harvesting properties and low-lying HOMO levels. Preliminary results on bilayer heterojunction solar cells with C(60) as acceptor show power conversion efficiency higher than 1.0%.