Functional effects of the hypertrophic cardiomyopathy R403Q mutation are different in an alpha- or beta-myosin heavy chain backbone.

The R403Q mutation in the beta-myosin heavy chain (MHC) was the first mutation to be linked to familial hypertrophic cardiomyopathy (FHC), a primary disease of heart muscle. The initial studies with R403Q myosin, isolated from biopsies of patients, showed a large decrease in myosin motor function, leading to the hypothesis that hypertrophy was a compensatory response. The introduction of the mouse model for FHC (the mouse expresses predominantly alpha-MHC as opposed to the beta-isoform in larger mammals) created a new paradigm for FHC based on finding enhanced motor function for R403Q alpha-MHC. To help resolve these conflicting mechanisms, we used a transgenic mouse model in which the endogenous alpha-MHC was largely replaced with transgenically encoded beta-MHC. A His(6) tag was cloned at the N terminus of the alpha-and beta-MHC to facilitate protein isolation by Ni(2+)-chelating chromatography. Characterization of the R403Q alpha-MHC by the in vitro motility assay showed a 30-40% increase in actin filament velocity compared with wild type, consistent with published studies. In contrast, the R403Q mutation in a beta-MHC backbone showed no enhancement in velocity. Cleavage of the His-tagged myosin by chymotrypsin made it possible to isolate homogeneous myosin subfragment 1 (S1), uncontaminated by endogenous myosin. We find that the actin-activated MgATPase activity for R403Q alpha-S1 is approximately 30% higher than for wild type, whereas the enzymatic activity for R403Q beta-S1 is reduced by approximately 10%. Thus, the functional consequences of the mutation are fundamentally changed depending upon the context of the cardiac MHC isoform.

Preferential myosin heavy chain isoform B Expression may contribute to the faster velocity of contraction in veins versus arteries.

Smooth muscle myosin heavy chains occur in 2 isoforms, SMA (slow) and SMB (fast). We hypothesized that the SMB isoform is predominant in the faster-contracting rat vena cava compared to thoracic aorta. We compared the time to half maximal contraction in response to a maximal concentration of endothelin-1 (ET-1; 100 nM), potassium chloride (KCl; 100 mM) and norepinephrine (NE; 10 microM). The time to half maximal contraction was shorter in the vena cava compared to aorta (aorta: ET-1 = 235.8 +/- 13.8 s, KCl = 140.0 +/- 33.3 s, NE = 19.8 +/- 2.7 s; vena cava: ET-1 = 121.8 +/- 15.6 s, KCl = 49.5 +/- 6.7 s, NE = 9.0 +/- 3.3 s). Reverse-transcription polymerase chain reaction supported the greater expression of SMB in the vena cava compared to aorta. SMB was expressed to a greater extent than SMA in the vessel wall of the vena cava. Western analysis determined that expression of SMB, relative to total smooth muscle myosin heavy chains, was 12.5 +/- 4.9-fold higher in the vena cava compared to aorta, while SMA was 4.9 +/- 1.2-fold higher in the aorta than vena cava. Thus, the SMB isoform is the predominant form expressed in rat veins, providing one possible mechanism for the faster response of veins to vasoconstrictors.

Potent inhibition of arterial smooth muscle tonic contractions by the selective myosin II inhibitor, blebbistatin.

Blebbistatin is reported to be a selective and specific small molecule inhibitor of the myosin II isoforms expressed by striated muscles and nonmuscle (IC(50) = 0.5-5 microM) but is a poor inhibitor of purified turkey smooth muscle myosin II (IC(50) approximately 80 microM). We found that blebbistatin potently (IC(50) approximately 3 microM) inhibited the actomyosin ATPase activities of expressed "slow" [smooth muscle myosin IIA (SMA)] and "fast" [smooth muscle myosin IIB (SMB)] smooth muscle myosin II heavy-chain isoforms. Blebbistatin also inhibited the KCl-induced tonic contractions produced by rabbit femoral and renal arteries that express primarily SMA and the weaker tonic contraction produced by the saphenous artery that expresses primarily SMB, with an equivalent potency comparable with that identified for nonmuscle myosin IIA (IC(50) approximately 5 microM). In femoral and saphenous arteries, blebbistatin had no effect on unloaded shortening velocity or the tonic increase in myosin light-chain phosphorylation produced by KCl but potently inhibited beta-escin permeabilized artery contracted with calcium at pCa 5, suggesting that cell signaling events upstream from KCl-induced activation of cross-bridges were unaffected by blebbistatin. It is noteworthy that KCl-induced contractions of chicken gizzard were less potently inhibited (IC(50) approximately 20 microM). Adult femoral, renal, and saphenous arteries did not express significant levels of nonmuscle myosin. These data together indicate that blebbistatin is a potent inhibitor of smooth muscle myosin II, supporting the hypothesis that the force-bearing structure responsible for tonic force maintenance in adult mammalian vascular smooth muscle is the cross-bridge formed from the blebbistatin-dependent interaction between actin and smooth muscle myosin II.

Phosphorylation of a single head of smooth muscle myosin activates the whole molecule.

Regulatory light chain (RLC) phosphorylation activates smooth and non-muscle myosin II, but it has not been established if phosphorylation of one head turns on the whole molecule. Baculovirus expression and affinity chromatography were used to isolate heavy meromyosin (HMM) containing one phosphorylated and one dephosphorylated RLC (1-P HMM). Motility and steady-state ATPase assays indicated that 1-P HMM is nearly as active as HMM with two phosphorylated heads (2-P HMM). Single-turnover experiments further showed that both the dephosphorylated and phosphorylated heads of 1-P HMM can be activated by actin. Singly phosphorylated full-length myosin was also an active species with two cycling heads. Our results suggest that phosphorylation of one RLC abolishes the asymmetric inhibited state formed by dephosphorylated myosin [Liu, J., et al. (2003) J. Mol. Biol. 329, 963-972], allowing activation of both the phosphorylated and dephosphorylated heads. These findings help explain how smooth muscles are able to generate high levels of stress with low phosphorylation levels.

A mutant heterodimeric myosin with one inactive head generates maximal displacement.

Each of the heads of the motor protein myosin II is capable of supporting motion. A previous report showed that double-headed myosin generates twice the displacement of single-headed myosin (Tyska, M.J., D.E. Dupuis, W.H. Guilford, J.B. Patlak, G.S. Waller, K.M. Trybus, D.M. Warshaw, and S. Lowey. 1999. Proc. Natl. Acad. Sci. USA. 96:4402-4407). To determine the role of the second head, we expressed a smooth muscle heterodimeric heavy meromyosin (HMM) with one wild-type head, and the other locked in a weak actin-binding state by introducing a point mutation in switch II (E470A). Homodimeric E470A HMM did not support in vitro motility, and only slowly hydrolyzed MgATP. Optical trap measurements revealed that the heterodimer generated unitary displacements of 10.4 nm, strikingly similar to wild-type HMM (10.2 nm) and approximately twice that of single-headed subfragment-1 (4.4 nm). These data show that a double-headed molecule can achieve a working stroke of approximately 10 nm with only one active head and an inactive weak-binding partner. We propose that the second head optimizes the orientation and/or stabilizes the structure of the motion-generating head, thereby resulting in maximum displacement.

The two heads of smooth muscle myosin are enzymatically independent but mechanically interactive.

The interaction between the two heads of myosin II during motion and force production is poorly understood. To examine this issue, we developed an expression and purification strategy to isolate homogeneous populations of heterodimeric smooth muscle heavy meromyosins containing heads with different properties. As an extreme example, we characterized a heterodimer containing one native head and one head locked in a "weak binding" state by a point mutation in switch 2 (E470A). The in vitro actin filament motility of this heterodimer was the same as the homodimeric control with two cycling heads, suggesting that only one head of a pair actively interacts with actin to generate maximal velocity. A second naturally occurring heterodimer contained two cycling heads with 2-fold different activity, due to the presence or absence of a 7-amino acid insert near the active site. Enzymatically this (+/-) insert heterodimer was indistinguishable from a (50:50) mixture of the two homodimers, but its motility averaged 17% less than that of the mixture. These data suggest that one head of a heterodimer can disproportionately affect the mechanics of double-headed myosin, a finding relevant to our understanding of heterozygous mutant myosins found in disease states like familial hypertrophic cardiomyopathy.

The carboxyl-terminal isoforms of smooth muscle myosin heavy chain determine thick filament assembly properties.

The alternatively spliced SM1 and SM2 smooth muscle myosin heavy chains differ at their respective carboxyl termini by 43 versus 9 unique amino acids. To determine whether these tailpieces affect filament assembly, SM1 and SM2 myosins, the rod region of these myosin isoforms, and a rod with no tailpiece (tailless), were expressed in Sf 9 cells. Paracrystals formed from SM1 and SM2 rod fragments showed different modes of molecular packing, indicating that the tailpieces can influence filament structure. The SM2 rod was less able to assemble into stable filaments than either SM1 or the tailless rods. Expressed full-length SM1 and SM2 myosins showed solubility differences comparable to the rods, establishing the validity of the latter as a model for filament assembly. Formation of homodimers of SM1 and SM2 rods was favored over the heterodimer in cells coinfected with both viruses, compared with mixtures of the two heavy chains renatured in vitro. These results demonstrate for the first time that the smooth muscle myosin tailpieces differentially affect filament assembly, and suggest that homogeneous thick filaments containing SM1 or SM2 myosin could serve distinct functions within smooth muscle cells.