Antimicrobial Composites Based on Methacrylic Acid-Methyl Methacrylate Electrospun Fibers Stabilized with Copper(II).

This study presents fibers based on methacrylic acid-methyl methacrylate (Eudragit L100) as Cu(II) adsorbents, resulting in antimicrobial complexes. Eudragit L100, an anionic copolymer synthesized by radical polymerization, was electrospun in dimethylformamide (DMF) and ethanol (EtOH). The electrospinning process was optimized through a 22-factorial design, with independent variables (copolymer concentration and EtOH/DMF volume ratio) and three repetitions at the central point. The smallest average fiber diameter (259 ± 53 nm) was obtained at 14% w/v Eudragit L100 and 80/20 EtOH/DMF volume ratio. The fibers were characterized using scanning electron microscopy (SEM), infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR), and differential scanning calorimetry (DSC). The pseudo-second-order mechanism explained the kinetic adsorption toward Cu(II). The fibers exhibited a maximum adsorption capacity (qe) of 43.70 mg/g. The DSC analysis confirmed the Cu(II) absorption, indicating complexation between metallic ions and copolymer networks. The complexed fibers showed a lower degree of swelling than the non-complexed fibers. The complexed fibers exhibited bacteriostatic activity against Gram-negative (Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. This study successfully optimized the electrospinning process to produce thin fibers based on Eudragit L100 for potential applications as adsorbents for Cu(II) ions in aqueous media and for controlling bacterial growth.

Carboxymethylcellulose hydrogels crosslinked with keratin nanoparticles for efficient prednisolone delivery.

Carboxymethylcellulose (CMC) and keratin nanoparticle (KNP) hydrogels were obtained, characterized, and applied as drug delivery systems (DDSs) for the first time. Lyophilized CMC/KNP mixtures containing 10, 25, and 50 wt% of KNPs were kept at 170 °C for 90 min to crosslink CMC chains through a solid-state reaction with the KNPs. The hydrogels were characterized by infrared spectroscopy, thermal analyses, X-ray diffraction, mechanical measurements, and scanning electron microscopy. The infrared spectra indicated the formation of ester and amide linkages between crosslinked CMC and KNPs. The elastic modulus of the hydrogel containing 10 wt% KNPs was 2-fold higher than that of the hydrogel containing 50 wt% KNPs. The mechanical properties influenced the hydrogel stability and water uptake. The anti-inflammatory prednisolone (PRED) drug was incorporated into the hydrogels, and the release mechanism was investigated. The hydrogels supported PRED release by drug desorption for approximately 360 h. A sustained release mechanism was achieved. The CMC/KNP and CMC/KNP/PRED hydrogels were cytocompatible toward mammalian cells. The CMC/KNP/PRED set imparted the highest cell viability after 7 days of incubation. This study showed a straightforward procedure to create DDSs (chemically crosslinked) based on polysaccharides and proteins for efficient PRED delivery.

FTIR-Assisted Electroreduction of CO2 and H2O to CO and H2 by Electrochemically Deposited Copper on Oxidized Graphite Felt.

Obtaining CO and H2 from electrochemical CO2 reduction (CO2RR) offers a viable alternative to reduce CO2 emissions and produce chemicals and fuels. Herein, we report a simple strategy for obtaining polycrystalline copper deposited on oxidized graphite felt (Cu-OGF) and its performance on the selective conversion of CO2 and H2O to CO and H2. For the electrode obtaining, graphite felt (GF) was first oxidized (OGF) in order to make the substrate hydrophilic and then copper particles were electrochemically deposited onto OGF. The pH of deposition was investigated, and the CO2RR activity was assessed for the prepared electrodes at each pH (2.0, 4.0, 6.0, 8.0, and 10.0). It was found that pH 2.0 was the most promising for CO2RR due to the presence of hexagonal copper microparticles. Fourier transform infrared analysis of the produced gases showed that this is a low-cost catalyst capable of reducing CO2 and H2O to CO and H2, with Faradaic efficiencies between 0.50 and 5.21% for CO and 50.87 to 98.30% for H2, depending on the experimental conditions. Hence, it is possible for this gas mixture to be used as a fuel gas or to be enriched with CO for use in Fischer-Tropsch processes.

Magnetic-responsive polysaccharide hydrogels as smart biomaterials: Synthesis, properties, and biomedical applications.

This review reports recent advances in polysaccharide-based magnetic hydrogels as smart platforms for different biomedical applications. These hydrogels have proved to be excellent, viable, eco-friendly alternative materials for the biomedical field due to their biocompatibility, biodegradability, and possibility of controlling delivery processes via modulation of the remote magnetic field. We first present their main synthesis methods and compare their advantages and disadvantages. Next, the synergic properties of hydrogels prepared with polysaccharides and magnetic nanoparticles (MNPs) are discussed. Finally, we describe the main contributions of polysaccharide-based magnetic hydrogels in the targeted drug delivery, tissue regeneration, and hyperthermia therapy fields. Overall, this review aims to motivate the synthesis of novel composite biomaterials, based on the combination of magnetic nanoparticles and natural polysaccharides, to overcome challenges that still exist in the treatment of several diseases.

Chemically crosslinked guar gum hydrogels: An investigation on the water transport and its relationship with hydrocortisone release.

In this work, we describe the synthesis, the characterization, and the potential application of a pH-responsive guar gum-based hydrogel. The polysaccharide produced permanent hydrogels with improved biocompatibility. In this work, we report the chemical modification of guar gum (with glycidyl methacrylate) and its use, as the main constituent, in obtaining chemically cross-linked hydrogels. The morphology, swelling properties, and cytotoxicity of the resulting materials were studied in-depth. The hydrogels showed to be pH-responsive, and non-toxic being safe to use it as a biomaterial. In addition, we tested the potential of this one as a drug carrier. Herein, we have chosen hydrocortisone (HCS) as a drug model. The mechanism of HCS release changed as a function of pH, owing to different responses in each medium. Our results indicate that the guar gum hydrogels have great potential to be used, with safety, as a drug carrier.

Effect of chitin nanowhiskers on mechanical and swelling properties of Gum Arabic hydrogels nanocomposites.

Hydrogels based on biopolymers like Gum Arabic (GA) usually show low applicability due to weak mechanical properties. To overcome this issue, (nano)fillers are utilized as reinforcing agents. Here, GA hydrogels were reinforced by chitin nanowhiskers (CtNWs, aspect ratio of 14) isolated from the biopolymer chitin through acid hydrolysis. Firstly, GA was chemically modified with glycidyl methacrylate (GMA), which allowed its crosslinking by free radical reactions. Next, hydrogel samples containing different concentrations of CtNWs (0-10 wt%) were prepared and fully characterized. Mechanical characterization revealed that 10 wt% of CtNWs promoted an increase of 44% in the Young's modulus and 96% the rupture force values compared to the pristine hydrogel. Overall, all nanocomposites were stiffer and more resistant to elastic deformation. Due to this feature, the swelling capacity of the nanocomposites decreased. GA hydrogel without CtNWs exhibited a swelling degree of 975%, whereas nanocomposites containing CtNWs exhibited swelling degrees under 725%.

Development of composite hydrogel based on hydroxyapatite mineralization over pectin reinforced with cellulose nanocrystal.

Hydrogels based on pectin and cellulose nanocrystals (CNC) were used in our study to nucleation and growth of hydroxyapatite (HAp) by the biomimetic method. In this study, we evaluated the direct impact of the different percentages of CNC on pectin hydrogel and the influence of HAp obtained through two methods. CNC were obtained from HCl hydrolysis following chemical functionalization through vinyl groups. The percentage of CNC positively induces thermal stability, mechanical properties and HAp mineralization from biomimetic using simulated body fluid (1.5 SBF). Hydrogels with 5% of CNC showed a higher amount of HAp immersed for 14 days, about 28% of HAp. The obtained hydrogels were compared with hydrogels containing 20% of HAp nanoparticles obtained by chemical precipitation. Biocompatibility of the hydrogels was evaluated by cell viability using fibroblasts (L929). In general, the hydrogels obtained through the biomimetic method show slightly larger biocompatibility compared to the hybrid hydrogels obtained from chemical precipitation.

Uncommon Sorption Mechanism of Aromatic Compounds onto Poly(Vinyl Alcohol)/Chitosan/Maleic Anhydride-ß-Cyclodextrin Hydrogels.

Aromatic hydrocarbons are extensive environmental pollutants occurring in both water and air media, and their removal is a priority effort for a healthy environment. The use of adsorbents is among the several strategies used for the remediation of these compounds. In this paper, we aim the synthesis of an amphiphilic hydrogel with the potential for the simultaneous sorption of a set of monocyclic and polycyclic aromatic hydrocarbons associated with toxicity effects in humans. Thus, we start by the synthesis of a copolymer-based in chitosan and ß-cyclodextrin previously functionalized with the maleic anhydride. The presence of ß-cyclodextrin will confer the ability to interact with hydrophobic compounds. The resulting material is posteriorly incorporated in a cryogel of poly(vinyl alcohol) matrix. We aim to improve the amphiphilic ability of the hydrogel matrix. The obtained hydrogel was characterized by swelling water kinetics, thermogravimetric analysis, rheological measurements, and scanning electron microscopy. The sorption of aromatic hydrocarbons onto the gel is characterized by pseudo-first-order kinetics and Henry isotherm, suggesting a physisorption mechanism. The results show that the presence of maleic anhydride-ß-cyclodextrin and chitosan into hydrogels leads to an increase in the removal efficiency of the aromatic compounds. Additionally, the capacity of this hydrogel for removing these pollutants from a fossil fuel sample has also been tested.

Drug polarity effect over the controlled release in casein and chondroitin sulfate-based hydrogels.

This study compared the controlled release of two drugs: vitamin-B12, and l-dopa from hydrogels based on 50% of casein (CAS, a protein), 50% of chondroitin sulfate (CS, a polysaccharide) and different amounts of SiO2. The results indicated that the incorporation of 5% of SiO2 to the materials, allowed the best organization, distribution, and diameter of the pores, which are responsible for ensuring a more controlled release. Also, the matrices were not efficient in releasing vitamin-B12, but it successfully released l-dopa. It happened because vitamin-B12 is highly hydrophilic, interacting more with the medium than with the CAS/CS matrix, while l-dopa is less polar than vitamin-B12, interacting more with the CAS/CS matrix. It is worth mentioning that all synthesized hydrogels were non-toxic to the cells as showed by the in vitro assay. This work also demonstrated the importance of evaluating drug delivery devices using drugs of different polarities before stating if they are efficient or not.

Nanofibrous silica microparticles/polymer hybrid aerogels for sustained delivery of poorly water-soluble camptothecin.

The surface functionalization of nanoporous silica materials with chemical agents opens up numerous possibilities, including improvement in the materials' ability to carry high payloads of drugs. In this study, KCC-1 nanofibrous silica microparticles are functionalized with methyl groups and then combined with poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) to produce hybrid aerogels that can deliver a poorly water-soluble anticancer drug. The synthetic steps involve freeze-drying a polymer solution of PVA and PAA that contains methyl-modified KCC-1 microparticles and then cross-linking the two polymers via a solid-state reaction. Benefiting from the incorporated methyl-modified KCC-1 microparticles, the hybrid aerogels can load and deliver a payload of camptothecin (CPT), an anticancer drug with antitumor activity but limited clinical application due to its hydrophobicity. The aerogels also show a sustained release of CPT for more than two weeks. The drug release profile can further be tuned by varying the relative amounts of PVA, PAA, and methyl-modified KCC-1. The aerogels are biocompatible to healthy cells, such as immortalized human epithelial (HaCaT), African green monkey kidney (Vero) and murine fibroblast (L929) cells. When loaded with CPT, they show potent antitumor activity against HeLa (HPV18-positive), SiHa (HPV16-positive) and C33A (HPV-negative) cancer cells, significantly inhibiting cell growth.

pH-responsive hybrid hydrogels: Chondroitin sulfate/casein trapped silica nanospheres for controlled drug release.

In this study, the materials were synthesized by chemically crosslinking chondroitin sulfate (CS), casein (CAS), and silica nanospheres (SiO2), creating a highly crosslinked network. The hydrogel release profile was adaptable (that is, it could be faster or slower as needed) simply by changing the polymeric proportion. The incorporation of 5% of silica nanospheres, in mass, for all CAS/CS matrices promoted a better-controlled and sustained release of l-dopa, focusing on the matrix based on 70% of CAS, 30% of CS and 5% of silica, whose l-dopa release lasted for 87 h. Besides, hydrogels are cytocompatible. These new hydrogels can be considered highly attractive materials to be used for controlled and sustained drug release purposes, as well as scaffolds and wound dressing systems.

Enhancing Near-Infrared Photothermal Efficiency of Biocompatible Flame-Synthesized Carbon Nano-Onions with Metal Dopants and Silica Coating.

As an alternative to eliminating cancer cells with minimal impacts on the nearby tissues, biocompatible nanoparticles based on silica-coated carbon nano-onions, with outstanding photothermal efficiency, are presented. Metal-doped carbon nano-onion@SiO2 materials are produced using flame synthesis. Metal complexes are injected in the flame to tune the carbon organization levels, which results in materials with excellent photostability and total photothermal conversion efficiency, regarding the incident light input, as higher as 48% for 785 nm laser. It was found that the metal dopant, even at a very low content, plays an interesting role in photothermal efficiency. We tested the effect of thin silica layers on the carbon nanosphere, first as a way to improve biocompatibility and provide a more reactive surface toward the modifications process to add vectorizing agents. Despite the primary goal of the silica shell, a notable increase in photothermal efficiency was observed. In vivo studies of the biological response to the materials as probed by the zebrafish model found that the as-prepared carbon nanospheres and the SiO2-coated particles are highly biocompatible. The SiO2-coated samples were found to be more suitable for photothermal application, due to the higher colloidal stability and higher photothermal efficiency.

Oral treatment with T6-loaded yeast cell wall particles reduces the parasitemia in murine visceral leishmaniasis model.

Yeast cell wall particles isolated from Saccharomyces cerevisiae (scYCWPs) have a rich constitution of ß-glucan derived from the cell wall. After removing intracellular contents, ß-glucan molecules are readily recognized by dectin-1 receptors, present on the cytoplasmic membrane surface of the mononuclear phagocytic cells and internalized. Leishmania spp. are obligate intracellular parasites; macrophages are its primary host cells. An experimental murine model of visceral leishmaniasis caused by L. infantum was used to evaluate the antileishmanial activity of oral administration of these particles. A low-water soluble thiophene previously studied in vitro against L. infantum was entrapped into scYCWPs to direct it into the host cell, in order to circumvent the typical pharmacokinetic problems of water-insoluble compounds. We found that scYCWPs + T6 reduced the parasitic burden in the liver and spleen. There was an increase in IFN-γ levels related to nitric oxide production, explaining the reduction of the L. infantum burden in the tissue. Histological analysis did not show signals of tissue inflammation and biochemical analysis from plasma did not indicate signals of cytotoxicity after scYCWPs + T6 treatment. These findings suggested that scYCWPs + T6 administered through oral route reduced the parasitic burden without causing toxic effects, satisfying requirements for development of new strategies to treat leishmaniasis.

In situ growth of manganese oxide nanosheets over titanium dioxide nanofibers and their performance as active material for supercapacitor.

In recent years, electrochemical energy devices, i.e. batteries, fuel cells, solar cells, and supercapacitors, have attracted considerable attention of scientific community. The architecture of active materials plays a crucial role for improving supercapacitors performance. Herein, titanium dioxide (TiO2) nanofibers (1D) have been synthesized by electrospinning process and used as a backbone to manganese dioxide (MnO2) nanosheets (2D) growth through hydrothermal method. This strategy allows the obtaining of 1D/2D heterostructure architecture, which has demonstrated superior electrochemical performance in relation to pristine MnO2. The highest electrochemical performance is due to the synergic effect between the metal oxides, where TiO2 nanofibers provide electrochemical stability for active MnO2 phase. Thus, the designed TiO2@MnO2 structure can reach maximum specific capacitance of 525 F·g-1 at a current density of 0.25 A·g-1, and it demonstrates an excellent stability by retaining 81% of the initial capacitance with coulombic efficiency of 91%. Therefore, the novel architecture of TiO2@MnO2 based on nanofibers and nanosheets exhibits superior electrochemical properties to be used in supercapacitor applications.

Two-dimensional thermoresponsive sub-microporous substrate for accelerated cell tissue growth and facile detachment.

Thermoresponsive sub-microporous films having a lower critical solution temperature (LCST), promptly obtained by using the breath figure method, were applied to tissue engineering. These sub-microporous films, sized 100-400 nm, were prepared by blending poly(N-isopropylacrylamide) (PNIPAAm) with polystyrene (PS), in addition to applying the dynamic breath figure (BF) method. The thermoresponsive blends were prepared with polyethylene terephthalate (PET) substrate by using a spin coater; the pore size was modulated according to the spin speed. The sub-microporous films, either with pure PNIPAAm or with different PNIPAAm contents were applied as substrates in order to obtain cell growth (Vero cells); moreover, the effect of PNIPAAm use was evaluated. The PNIPAAm sub-microporous films made the cellular viability to be 9-13-fold higher than the control sample commonly used in cell culture. In addition, the thermoresponsive PNIPAAm properties were even noticed at a low PNIPAAm content in the porous films. Such polymer system was successfully applied to detach the Vero cell tissue using temperature variation.

Polysaccharide-based adsorbents prepared in ionic liquid with high performance for removing Pb(II) from aqueous systems.

Alginate/chitosan (ALG/CHT) and alginate/N,N-dimethyl chitosan (ALG/DMC) polyelectrolyte complex (PEC)-based adsorbents with high capacities for removing Pb(II) from aqueous systems are produced in [1-hydrogen-3-methylimidazolium hydrogen sulfate ionic liquid ([Hmim][HSO4-]). The [Hmim][HSO4-] is recovered, characterized by 1H NMR and reused to yield novel polysaccharide-based adsorbents. As-obtained PEC materials are characterized through infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy and Zeta potential measurements. Kinetic and equilibrium adsorption studies reveal that the pseudo-second-order Kinetic, as well as the Redlich-Peterson isotherm, provide the best fits for the experimental data, respectively. CHT/ALG and DMC/ALG adsorbents promoted maximum adsorption capacities (qm) of 529.4 mg g-1 and 560.2 mg g-1, respectively. After adsorption, the materials are characterized by infrared spectroscopy and X-ray photoelectron spectroscopy, confirming that the chemisorption prevails upon Pb(II) removal. Also, PECs produced in the recovered [Hmim][HSO4-] have good capacities for removing Pb(II) ions from aqueous systems as well. This study showed that the [Hmim][HSO4-] is an alternative solvent to prepare novel and eco-friendly PEC-based adsorbents.

Designing hybrid materials with multifunctional interfaces for wound dressing, electrocatalysis, and chemical separation.

An infinite number of possibilities can emerge from the combination of phases in hybrid systems. Interfacing phases is a strategy to obtain a set of properties in one system that are beyond the abilities of single phases. Herein, the progress in materials science exploring hybrid systems are discussed from the point of view of three important applications: wound dressing; electrocatalysis; and chemical separation. These three unrelated applications exemplify the broad impact of hybrid materials, which can be coherently designed to achieve outstanding performance. Many inspiring works have been published in the last few years, remodeling the edges of human knowledge on hybrid materials. However, the challenges in the coherent design seem to rely on the development of synthetic processes to achieve stronger integration among the phases in a hybrid material.

Effect of phase composition on the photocatalytic activity of titanium dioxide obtained from supercritical antisolvent.

Photocatalytic activity of TiO2 nanoparticles is highly dependent on their phase composition. The coexistence of anatase and rutile phases in a single nanoparticle eases the electron transfer process between the phases, and favors the separation of photogenerated pairs. In this work, highly photoactive mixed-phase TiO2 nanostructures were prepared by supercritical antisolvent precipitation (SAS), an environmentally friendly technology. It is shown here that this methodology has the remarkable ability to produce highly porous (515 m2/g) and crystalline TiO2 nanoparticles. The phase composition of as-prepared TiO2 samples can be tailored through annealing process. Several mixed-phase TiO2 samples were tested to assess the correlation between photocatalytic activity and phase composition. The photocatalytic performance is strongly affected by the anatase-rutile ratio, since the synergism between phases enhances the charge separation, reducing the recombination effect of the photogenerated pairs (e-/h+). It was found that the nanocatalyst composed by 7.0 wt% of rutile phase and 93.0 wt% of anatase phase, named as TiO2_650, presented the highest photodegradation for both methyl orange (MO) and methylene blue (MB) dyes. Interestingly, TiO2 samples prepared by SAS have superior photoactivity than the benchmark photocatalyst names as P25, which is a widely used TiO2 material composed of anatase and rutile phases.

Biomimetic nanocomposite based on hydroxyapatite mineralization over chemically modified cellulose nanowhiskers: An active platform for osteoblast proliferation.

Functionalized-cellulose nanowhiskers (CNWs) were obtained and used to improve hydroxyapatite (HAp) growth by the biomimetic method. CNWs were obtained through HCl hydrolysis and then submitted to chemical functionalization with carboxylate or amine groups that can induce selective HAp mineralization efficiently. Functionalized-CNWs were tested against HAp growth through the biomimetic method using a simulated body fluid (SBF) as a medium during 14 and 28 days of mineralization. Both chemical surface nature (bearing carboxylate or amine reactive groups) and contact time with SBF influenced the nucleation and growth of HAp crystals over CNWs surface. Nanocomposites immersed for 28 days showed a higher amount of HAp crystals compared to bare CNWs or the ones immersed for 14 days. Biocompatibility of the nanomaterials immersed for 14 days in SBF was evaluated through cell viability test using pre-osteoblasts (MC3T3-E1). In general, functionalized-CNWs containing HAp crystals deposited through biomimetic method showed promising results, with CNWs bearing amine groups showing a slightly larger biocompatibility compared to the ones bearing carboxylate groups during an incubation period of 24 h.

Water Droplet Self-Assembly to Au Nanoporous Films with Special Light Trapping and Surface Electromagnetic Field Enhancement.

Gold nano "breath figure" films are for the first time reported and their function as ideal systems for plasmonics demonstrated. Metal nano-breath figure substrates are metal thin films containing nanohole arrays supported on a solid substrate. Au nanohole arrays are prepared from the dynamic breath figure phenomenon, in which the pore formation is controlled to provide holes smaller than 100 nm. Au layer is deposited on polymer substrates containing breath figure topology. The breath figure topology can be fully translated to the Au layer. The nanofabrication process is completed within few minutes. A simplified preparation process but very impressive light trapping and surface electromagnetic field enhancement are related to the Au breath figure films obtained in this work. The porous films demonstrated higher absorbance in the region of 500-1100 nm than nonporous Au films. In the case of 10 nm Au film, the plasmon absorbance becomes more intense than the electronic band absorbance. The electromagnetic enhancement is proved by surface enhanced Raman spectroscopy effect, which is found to be very close to the maximum possible value predicted for nonresonant species.