RESUMEN
Derivatives of the natural product punicine [1-(2',5'-dihydroxyphenyl)pyridinium chloride] were developed as switchable collectors for the flotation of lithium-containing engineered artifical minerals (EnAMs). These EnAMs are e.g. formed by pyrometallurgical processing of end-of-life lithium-ion batteries. Depending on the pH value and the lighting conditions, punicines exist in water as cations, two different electrostatically neutral mesomeric betaines, anionic tripoles, radical cations or radical anions. The radical species form by photochemically induced disproportionation reactions. We prepared punicine derivatives introducing alkyl chains in the pyridinium moiety (4-methyl, 4-ethyl, 4-octyl and 4-undecanyl) to install hydrophobic groups and examined the recovery rates of the flotation of lithium aluminate (LiAlO2). We varied the lighting conditions (darkness, daylight, LED irradiation at λ = 390-400 nm) and the pH value, the collector's and frother's concentration, and the flotation time. With our collectors, recovery rates of lithium aluminate up to 90% were accomplished when the flotation was conducted in Hallimond tubes exposed to daylight at pH 11 in water.
RESUMEN
Over the last years, inverse gas chromatography (IGC) proved to be a versatile and sensitive analytical technique for physicochemical properties. However, the comparability of results obtained by different users and devices remains a topic for debate. This is the first time, an interlaboratory study using different types of IGC instruments is reported. Eight organizations with different IGC devices defined a common lab measurement protocol to analyse two standard materials, silica and lactose. All data was collected in a standard result form and has been treated identically with the objective to identify experimentally observed differences and not potentially different data treatments. The calculated values of the dispersive surface energy vary quite significantly (silica: 22 mJ/m2 - 34 mJ/m2, lactose 37 mJ/m2 - 51 mJ/m2) and so do the ISP values and retention volumes for both materials. This points towards significant and seemingly undiscovered differences in the operation of the instruments and the obtained underlying primary data, even under the premise of standard conditions. Variations are independent of the instrument type and uncertainties in flow rates or the injected quantities of probe molecules may be potential factors for the differences. This interlaboratory study demonstrates that the IGC is a very sensitive analytical tool, which detects minor changes, but it also shows that for a proper comparison, the measurement conditions have to be checked with great care. A publicly available standard protocol and material, for which this study can be seen as a starting point, is still needed to judge on the measurements and the resulting parameters more objectively.
Asunto(s)
Lactosa , Dióxido de Silicio , Propiedades de Superficie , Lactosa/química , Reproducibilidad de los Resultados , Cromatografía de Gases/métodosRESUMEN
The extraction of various minerals is commonly conducted through froth flotation, which is a versatile separation method in mineral processing. In froth flotation, depressants are employed to improve the flotation selectivity by modifying the wettability of the minerals and reducing their natural or induced floatability. However, the environmental impact of many current flotation chemicals poses a challenge to the sustainability and selectivity of the ore beneficiation processes. To mitigate this issue, cellulose, particularly nanocelluloses, has been explored as a potential alternative to promote sustainable mineral processing. This study focused on silylated cellulose nanocrystals (CNCs) as biodepressants for sulfide minerals in froth flotation. CNCs containing thiol silane groups or bifunctional CNCs containing both thiol and propyl silanes were synthesized using an aqueous silylation reaction, and their performance in the flotation of chalcopyrite and pyrite was investigated in the presence of a sodium isobutyl xanthate collector. The results showed that the modified CNCs exhibited preferential interaction between chalcopyrite, and the flotation recovery of chalcopyrite decreased from â¼76% to â¼24% in the presence of thiol-grafted CNCs at pH 6, while the pyrite recovery decreased only from â¼82% to â¼75%, indicating the efficient selectivity of thiol-silylated CNCs toward chalcopyrite depression.
RESUMEN
Imidazolium salts were prepared which possess 2-ethoxyethyl pivalate or 2-(2-ethoxyethoxy)ethyl pivalate groups as amphiphilic side chains with oxygen donors as well as n-butyl substituents as hydrophobic groups. The N-heterocyclic carbenes of the salts, characterized by 7Li and 13C NMR spectroscopy as well as by Rh and Ir complex formation, were used as starting materials for the preparation of the corresponding imidazole-2-thiones and imidazole-2-selenones. Flotation experiments in Hallimond tubes under variation of the air flow, pH, concentration and flotation time were performed. The title compounds proved to be suitable collectors for the flotation of lithium aluminate and spodumene for lithium recovery. Recovery rates up to 88.9% were obtained when the imidazole-2-thione was used as collector.
RESUMEN
In this study, synthetic pure cassiterite and cassiterite doped with two different Fe contents were successfully recrystallized by means of sintering. Their crystal structure and chemical compositions were characterized by X-ray powder diffraction (XRD) as well as scanning electron microscopy (SEM) combined with energy-dispersive X-ray (EDX) analysis. Their floatability was studied by microflotation with a diphosphonic acid surfactant named Lauraphos301 as a collector. Unlike the addition of ferric ions in solution, which strongly depressed the floatability of all of the cassiterite samples, a much higher flotation efficiency of the Fe-doped cassiterite samples was found especially at lower collector concentrations. The cassiterite floatability is proportional to the Fe content in cassiterite at a broad range of pH, and the recovery has the following order: cassiterite with 1417 ppm Fe > cassiterite with 1165 ppm Fe > pure cassiterite. The electrokinetic behavior of the cassiterite samples with and without the collector was studied by electrophoretic measurements and revealed that the chemical interaction dominated the adsorption. With the help of the particle shape analysis, a more angular shape was found for the Fe-doped cassiterite samples. Moreover, without the influence of particle shape, much abundant adsorption of Lauraphos301 was found on the Fe-doped cassiterite samples by AFM topography imaging. The minor amount of Fe in the cassiterite lattice and a more angular shape of the Fe-doped cassiterite samples were believed to enhance floatability collectively. The study reveals that the influence of the chemical composition of the minerals on flotation was almost inextricably bound up with particle morphology and emphasizes the importance of considering both factors and investigating them individually for the flotation study.
RESUMEN
Spin-orbit effects, inherent to electrons confined in quantum dots at a silicon heterointerface, provide a means to control electron spin qubits without the added complexity of on-chip, nanofabricated micromagnets or nearby coplanar striplines. Here, we demonstrate a singlet-triplet qubit operating mode that can drive qubit evolution at frequencies in excess of 200 MHz. This approach offers a means to electrically turn on and off fast control, while providing high logic gate orthogonality and long qubit dephasing times. We utilize this operational mode for dynamical decoupling experiments to probe the charge noise power spectrum in a silicon metal-oxide-semiconductor double quantum dot. In addition, we assess qubit frequency drift over longer timescales to capture low-frequency noise. We present the charge noise power spectral density up to 3 MHz, which exhibits a 1/fα dependence consistent with α ~ 0.7, over 9 orders of magnitude in noise frequency.
RESUMEN
In this study, the physicochemical behaviors of the (110), (100), as well as (001) of SnO2 were investigated by using high-resolution direct force spectroscopy. The measurements were conducted between a silica sphere and sample surfaces in 10 mmol/L KCl between pH 3.1 and 6.2 using colloidal probe atomic force microscopy (cp-AFM-hydrophilic). Dissimilar interactions were detected on different-oriented surfaces. The pH values where the force switched from positive to negative can be clearly distinguished and be ordered as SnO2(100) < SnO2(001) ≈ SnO2(110). By fitting the force curves in the Derjaguin-Landau-Verwey-Overbeck theory framework, anisotropic surface potentials were computed between the three sample surfaces following a similar trend as force interaction. To study the implication of crystallographic orientation to surfactant adsorption, we used Aerosol 22 (sulfosuccinamate) as an anionic collector for cassiterite flotation to functionalize the different samples at pH 3. The contact angle measurements, the topography visualizations by AFM, and the force measurement using cp-AFM with hydrophobized spheres (cp-AFM-hydrophobized) have shown that Aerosol 22 was adsorbed on the sample surfaces inhomogeneously. The adsorption followed the range of SnO2(110) > SnO2(100) > SnO2(001) in the concentration from 1 × 10-6 to 1 × 10-4 mol/L.
RESUMEN
The three-dimensional characterization of distributed particle properties in the micro- and nanometer range is essential to describe and understand highly specific separation processes in terms of selectivity and yield. Both performance measures play a decisive role in the development and improvement of modern functional materials. In this study, we mixed spherical glass particles (0.45.8 µm diameter) with glass fibers (diameter 10 µm, length 18660 µm) to investigate a borderline case of maximum difference in the aspect ratio and a significant difference in the characteristic length to characterize the system over several size scales. We immobilized the particles within a wax matrix and created sample volumes suitable for computed tomographic (CT) measurements at two different magnification scales (X-ray micro- and nano-CT). Fiber diameter and length could be described well on the basis of the low-resolution micro-CT measurements on the entire sample volume. In contrast, the spherical particle system could only be described with sufficient accuracy by combining micro-CT with high-resolution nano-CT measurements on subvolumes of reduced sample size. We modeled the joint (bivariate) distribution of fiber length and diameter with a parametric copula as a basic example, which is equally suitable for more complex distributions of irregularly shaped particles. This enables us to capture the multidimensional correlation structure of particle systems with statistically representative quantities.
RESUMEN
Surface nanobubbles have been identified to play an important role in a range of industries from mineral processing to food science. The formation of surface nanobubbles is of importance for mineral processing in the extraction of complex ores, such as those containing rare earth elements. This is due to the way minerals are extracted utilising froth flotation. In this study, surface nanobubbles were imaged using non-contact atomic force microscopy on a polished cross section containing rare earth minerals. Nanobubbles were found on synchysite under reagent conditions expected to induce hydrophobicity in rare earth minerals, which is required for efficient processing. Synchysite -(Ce) is a rare earth fluorcarbonate mineral containing over 30% rare earth elements. Relatively little research has been conducted on synchysite, with only a few papers on its surface behaviour and flotation. The resulting nanobubbles were analysed and showed an average contact angle of 24°â¯±â¯8. These are in line with contact angles found on dolomite and galena by previous studies.
RESUMEN
The defect structure of γ-Al2O3 derived from boehmite was investigated using a combination of selected-area electron diffraction (SAED) and powder X-ray diffraction (XRD). Both methods confirmed a strong dependence of the diffraction line broadening on the diffraction indices known from literature. The analysis of the SAED patterns revealed that the dominant structure defects in the spinel-type γ-Al2O3 are antiphase boundaries located on the lattice planes , which produce the sublattice shifts . Quantitative information about the defect structure of γ-Al2O3 was obtained from the powder XRD patterns. This includes mainly the size of γ-Al2O3 crystallites and the density of planar defects. The correlation between the density of the planar defects and the presence of structural vacancies, which maintain the stoichiometry of the spinel-type γ-Al2O3, is discussed. A computer routine running on a fast graphical processing unit was written for simulation of the XRD patterns. This routine calculates the atomic positions for a given kind and density of planar defect, and simulates the diffracted intensities with the aid of the Debye scattering equation.
RESUMEN
Multiferroic BiFeO3 crystals were investigated by means of micro-Raman spectroscopy using the laser wavelengths of 442 nm (resonant conditions) and 633 nm (non-resonant conditions). The azimuthal angle dependence of the intensity of the Raman modes allowed their symmetry assignment. The experimental data are consistent with a simulation based on Raman tensor formalism. Mixed symmetries were taken into account, considering the orientation of the crystal optic axis along a pseudo-cubic <111> direction. The strong anisotropic intensity variation of some of the polar Raman modes was used for line scans and mappings in order to identify ferroelastic domain patterns. The line scans performed with different excitation wavelengths and hence different information depths indicate a tilt of the domain walls with respect to the sample surface. The domain distribution found by Raman spectroscopy is in very good agreement with the finding of electron back scattering diffraction.
RESUMEN
Regulation of complex biological networks has proven to be a key bottleneck in synthetic biology. Interactions between the structurally flexible RNA and various other molecules in the form of riboswitches have shown a high-regulation specificity and efficiency and synthetic riboswitches have filled the toolbox of devices in many synthetic biology applications. Here we report the development of a novel, small molecule binding RNA aptamer, whose binding is dependent on light-induced change of conformation of its small molecule ligand. As ligand we chose an azobenzene because of its reliable photoswitchability and modified it with chloramphenicol for a better interaction with RNA. The synthesis of the ligand 'azoCm' was followed by extensive biophysical analysis regarding its stability and photoswitchability. RNA aptamers were identified after several cycles of in vitro selection and then studied regarding their binding specificity and affinity toward the ligand. We show the successful development of an RNA aptamer that selectively binds to only the trans photoisomer of azoCm with a KD of 545 nM. As the aptamer cannot bind to the irradiated ligand (λ = 365 nm), a light-selective RNA binding system is provided. Further studies may now result in the engineering of a reliable, light-responsible riboswitch.
Asunto(s)
Aptámeros de Nucleótidos/química , Compuestos Azo/química , Conformación de Ácido Nucleico/efectos de la radiación , ARN/química , Aptámeros de Nucleótidos/efectos de la radiación , Fenómenos Biofísicos , Ligandos , Luz , ARN/efectos de la radiación , Riboswitch/efectos de la radiación , Bibliotecas de Moléculas Pequeñas/químicaRESUMEN
[This corrects the article DOI: 10.1039/C8RA07952H.].
RESUMEN
Cosmogenic nuclide (CN) dating relies on specific target minerals such as quartz as markers to identify geologic events, including the timing of landscape evolution. The presence of feldspar in sediment samples poses a challenge to the separation of quartz and affects the chemical procedures for extracting the radioactive CNs 10Be and 26Al. Additionally, feldspar contamination reduces the 26Al/27Al ratio, thus hinders the accurate determination of 26Al by accelerator mass spectrometry (AMS). Using fluvial sediment samples from Central Asia, which contain 16-50 weight percent (wt.%) of feldspar, we show that the standard physical separation and chemical cleaning-up procedures for quartz-enrichment reduces the feldspar content to only 9-47â¯wt.%. We present a new froth flotation mineral-separation device and procedure that allows for very effective quartz enrichment before CN chemistry. Our flotation cell, which has a volume of 600â¯cm3, is built of borosilicate glass, holds up to 90â¯g of sample, and achieves quartz and feldspar separation in ≤2â¯h for very feldspar-rich samples. We trace the stepwise enrichment of quartz to 95-100% purity with our procedure by X-ray diffraction analysis.
RESUMEN
The silicon metal-oxide-semiconductor (MOS) material system is a technologically important implementation of spin-based quantum information processing. However, the MOS interface is imperfect leading to concerns about 1/f trap noise and variability in the electron g-factor due to spin-orbit (SO) effects. Here we advantageously use interface-SO coupling for a critical control axis in a double-quantum-dot singlet-triplet qubit. The magnetic field-orientation dependence of the g-factors is consistent with Rashba and Dresselhaus interface-SO contributions. The resulting all-electrical, two-axis control is also used to probe the MOS interface noise. The measured inhomogeneous dephasing time, [Formula: see text], of 1.6 µs is consistent with 99.95% 28Si enrichment. Furthermore, when tuned to be sensitive to exchange fluctuations, a quasi-static charge noise detuning variance of 2 µeV is observed, competitive with low-noise reports in other semiconductor qubits. This work, therefore, demonstrates that the MOS interface inherently provides properties for two-axis qubit control, while not increasing noise relative to other material choices.
RESUMEN
During the past years, atomic force microscopy (AFM) has matured to an indispensable tool to characterize nanomaterials in colloid and interface science. For imaging, a sharp probe mounted near to the end of a cantilever scans over the sample surface providing a high resolution three-dimensional topographic image. In addition, the AFM tip can be used as a force sensor to detect local properties like adhesion, stiffness, charge etc. After the invention of the colloidal probe technique it has also become a major method to measure surface forces. In this review, we highlight the advances in the application of AFM in the field of mineral flotation, such as mineral morphology imaging, water at mineral surface, reagent adsorption, inter-particle force, and bubble-particle interaction. In the coming years, the complementary characterization of chemical composition such as using infrared spectroscopy and Raman spectroscopy for AFM topography imaging and the synchronous measurement of the force and distance involving deformable bubble as a force sensor will further assist the fundamental understanding of flotation mechanism.
RESUMEN
Surface nanobubbles are of wide interest to a number of research fields, ranging from mineral processing to metamaterials. Their formation on hydrophobic surfaces has long been confirmed but the factors controlling their size and location are less well understood. In this work we investigate, using non-contact atomic force microscopy, the properties of surface nanobubbles on the mineral dolomite under three aqueous solutions; water, depressant and collector. Nanobubbles were observed under all three conditions, but with the highest density observed under collector conditions. Analysis of the critical angle of the bubbles suggests that the collector does not affect the surface tension of the bubbles, but instead does affect their pinning, consistent with the observed increased density.
RESUMEN
Individual donors in silicon chips are used as quantum bits with extremely low error rates. However, physical realizations have been limited to one donor because their atomic size causes fabrication challenges. Quantum dot qubits, in contrast, are highly adjustable using electrical gate voltages. This adjustability could be leveraged to deterministically couple donors to quantum dots in arrays of qubits. In this work, we demonstrate the coherent interaction of a 31P donor electron with the electron of a metal-oxide-semiconductor quantum dot. We form a logical qubit encoded in the spin singlet and triplet states of the two-electron system. We show that the donor nuclear spin drives coherent rotations between the electronic qubit states through the contact hyperfine interaction. This provides every key element for compact two-electron spin qubits requiring only a single dot and no additional magnetic field gradients, as well as a means to interact with the nuclear spin qubit.