RESUMEN
Background and Objectives: Surgical guides might impede the flow of coolant to the implant drills during the preparation of the implant bed, potentially contributing to increased temperatures during bone drilling. The objective of this experimental study was to assess the cooling efficiency of various guiding cylinder designs for sleeveless surgical guides used in guided surgery. Materials and Methods: In this experimental study, surgical guides with three different guiding cylinder designs were printed. One group had solid cylinders (control) and two test groups (cylinders with pores and cylinders with windows). Forty customized polyurethane blocks with type III bone characteristics were fitted into the guide and fixed in a vise, and implant bed preparations were completed using a simplified drilling protocol with and without irrigation. An infrared thermographic camera was used to record the temperature changes during drilling at the coronal, middle, and apical areas. ANOVA test and Games-Howell post hoc test were used to determine significant thermal differences among groups. Results: A significant thermal increase was observed at the coronal area in the group without irrigation (39.69 ± 8.82) (p < 0.05). The lowest thermal increase was recorded at the surgical guides with windows (21.451 ± 0.703 °C) compared to solid (25.005 ± 0.586 °C) and porous surgical guides (25.630 ± 1.004) (p < 0.05). In the middle and apical areas, there were no differences between solid and porous cylinders (p > 0.05). Conclusions: 3D-printed sleeveless surgical guides with window openings at the guiding cylinders reduce the temperature elevation at the cortical bone in guided implant surgery.
Asunto(s)
Osteotomía , Prótesis e Implantes , Humanos , Hueso Cortical , Microcirugia , Impresión TridimensionalRESUMEN
PURPOSE: This in-vitro study aims to investigate whether the wettability of two zirconia implant disk surfaces is affected by glycine and erythritol air-polishing, using saline, bovine serum albumin, bovine thrombin, and bovine artificial blood as the testing mediums. MATERIALS AND METHODS: Zirconia disks were provided by two implant companies: SDS. (Swiss Dental Solutions, Plymouth, MA, USA) (n=6) and Patent. (Zircon Medical AG, Altendorf, Switzerland) (n=6). Surface parameters (Sa, Sz, Sdr, Ssk, Sku, and Spd) were measured to determine their initial surface roughness. Air-polishing was completed using glycine or erythritol powders using the AIRFLOW. PERIO device (Manufactured by Electro Medical Systems (EMS)). The wettability of the disk surfaces was evaluated by the contact angle analysis applied on treated and untreated disks using four wetting solutions, saline, bovine serum albumin (BSA), bovine thrombin, and bovine artificial blood. In total, 720 contact angle measurements were completed with n=30 per group. Statistical analysis was performed using the one-way analysis of variance and post-hoc Tukey HSD test. RESULTS: The results indicate SDS. has a greater wettability than Patent. before and after air-polishing. The wettability of surfaces treated with glycine was hydrophobic in some cases. Erythritol increased the surface wettability of zirconia disks compared to glycine. BSA and bovine artificial blood had lower contact angles than saline and bovine thrombin for both untreated disks. CONCLUSIONS: The initial wettability of zirconia disks differs between manufacturers, and air-polishing with erythritol powder increases the wettability of zirconia implant disks for saline, bovine serum, bovine thrombin, and bovine artificial blood.
RESUMEN
Microstomia presents a challenge for the patient and dental provider. This report describes a partial digital workflow for the fabrication of a mandibular complete denture for a patient with microstomia. Computer-aided design and computer-aided manufacturing technology was utilized to 3D print a sectional custom tray with a unique design. The sectional custom tray was used to make a conventional border molded impression of the edentulous arch to fabricate a flexible complete mandibular denture for a 58-year-old female patient with scleroderma and microstomia. This treatment resulted in a successful prosthetic outcome and high patient satisfaction.
Asunto(s)
Microstomía , Boca Edéntula , Femenino , Humanos , Persona de Mediana Edad , Diseño de Dentadura , Microstomía/complicaciones , Técnica de Impresión Dental , Dentadura Completa , Diseño Asistido por ComputadoraRESUMEN
BACKGROUND: Recently, vesicles derived from plant cell membranes have received attention for their potential use as active biomolecules and nanocarriers, and obtaining them from organic crops may be an interesting option because different farming systems can affect production, plant secondary metabolism and biochemistry of cell membranes. The present study aimed to determine how organic and conventional farming affects the mineral nutrition, gas exchange, CO2 fixation and biochemical composition of lemon fruits, which could have an impact on the different fractions of cell membranes in pulp and juice. RESULTS: Organic trees had higher intrinsic water use efficiency (WUEi) but conventional trees had higher stomatal conductance (gs) and nitrogen use efficiency (NUtE). Also, organic lemons had significantly higher levels of some micronutrients (Ca, Cu, Fe and Zn). Second, the main differences in the membrane vesicles showed that organic pulp vesicles had a higher antioxidant activity and more oleic acid, whereas both types of vesicles from conventional lemons had more linoleic acid. CONCLUSION: In conclusion, organic farming did not alter carbon fixation parameters but impacted nitrogen fixation and water uptake, and resulted in higher micronutrient levels in lemons. These mineral nutritional changes could be related to the higher production of membranes that showed suitable morphological traits and a high antioxidant activity, positively correlated with a high amount of oleic acid, which could have stronger cell protection characteristics. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Asunto(s)
Citrus , Agricultura Orgánica , Agricultura Orgánica/métodos , Citrus/química , Frutas/química , Antioxidantes/análisis , Ácido Oléico/análisis , Agricultura/métodos , Minerales/análisis , Agua/análisisRESUMEN
La relación del trabajo social con la Administración de Justicia adquiere una nueva dimensión en el campo de la discapacidad. La Ley 8/2021, por la que se reforma la legislación civil y procesal para el apoyo a las personas con discapacidad en el ejercicio de su capacidad jurídica, reconoce la importancia de esta profesión y la sitúa junto a la profesión médica en cuánto a la información pericial y la intervención a realizar con personas con discapacidad. La cuestión de los apoyos para mejorar la capacidad jurídica es una variable fundamental para que la valoración sociofamiliar sea necesaria. La aportación de este estudio es descriptiva y propositiva, sitúa la ley en relación con la situación social y con la profesión del trabajo social. Posteriormente, detalla las disciplinas o especialidades del trabajo social que pueden participar en estos procedimientos judiciales, con ejemplos de relaciones previas entre la regulación de la discapacidad y el trabajo social. Finalmente, realiza una propuesta de trabajo, un inicio de protocolo de actuación entre disciplinas para buscar la colaboración en forma de mesa redonda que recoge la ley. (AU)
The relationship between social work and the administration of justice acquires a new dimension in the field of disability. Law 8/2021, which reforms civil and procedural legislation to support people with disabilities in the exercise of their legal capacity, recognizes the importance of this profession and places it on a par with the medical profession in terms of expert information and intervention to be carried out with people with disabilities. The question of support to improve legal capacity is a fundamental variable for the socio-family assessment to be necessary. The contribution of this study is descriptive and propositional; it places the law concerning the social situation and the profession of social work. Subsequently, it details the disciplines or specialties of social work that can participate in these judicial proceedings, with examples of previous relationships between the regulation of disability and social work. Finally, it makes a work proposal, a beginning of the protocol of action between disciplines to seek collaboration in the form of a round table that includes the law. (AU)
Asunto(s)
Humanos , Defensa de las Personas con Discapacidad/legislación & jurisprudencia , Personas con Discapacidad/legislación & jurisprudencia , Servicio Social/clasificación , Servicio Social/legislación & jurisprudencia , Discriminación Social , Estudios de la DiscapacidadRESUMEN
IMPORTANCE: Distoseptispora as a single genus in Distoseptisporaceae was introduced by morphological and phylogenetic analyses. Members of this genus occur mainly as asexual morphs, forming effuse, hairy colonies on decaying wood, plant stems, bamboo culms, and fallen leaves and shafts in terrestrial and freshwater habitats. In the present study, saprobic hyphomycetes from plant debris were investigated, and eight new Distoseptispora species were introduced based on morphology and phylogenetic analyses of LSU, ITS, TEF1, and RPB2 sequence data. This study provides important data on the species diversity, ecological environment, and geographical area of Distoseptispora, greatly updates the classification of Distoseptispora, and improves our understanding of the taxonomy of Distoseptispora.
Asunto(s)
Ascomicetos , Filogenia , China , Ambiente , Agua DulceRESUMEN
Objective: This study aimed to demonstrate temperature changes and heat transfer patterns in soft tissues when using infrared (IR) diode lasers, utilizing thermographic techniques. Methods: Bovine tongue slices (5 mm thick) were placed between two glass slides at 11 cm from a thermographic camera. Twenty-two centimeter-long incisions were made along the soft tissue parallel to the camera capture field. Incisions were performed using the 970 and 980 nm lasers (continuous wave, 2-watt, 320 µm-thick glass initiated, and noninitiated fiber tips, 30-sec irradiation). The maximum temperature changes in oC (ΔT) and the vertical and lateral heat transfer (in mm) were recorded for 30 sec, using the thermographic images captured using the IR camera. The ΔT and the amount of lateral and vertical heat distribution were measured in 10-sec intervals for a 30-sec irradiation period. A repeated analysis of variance (ANOVA) (p < 0.05) statistical test was used to analyze the statistical differences between the average ΔT and heat transfer patterns between the initiated and noninitiated lasers. Results: The maximum ΔT for the 970 nm diode laser with initiated tips at the 30-sec mark was 17.81 ± 11.48, while the maximum ΔT for the 980 nm diode laser with initiated tips was 13.24 ± 6.90 (p = 0.041). Statistically significant differences between the vertical and horizontal heat transfer patterns were noted between the initiated and noninitiated diode lasers. The 980 nm diode laser with initiated tips proved to have statistically significant greater vertical and lateral heat transfer when compared to the 970 nm diode laser. The 970 nm diode laser with noninitiated tips proved to have a statistically significant higher heat distribution when compared to the 980 nm laser with noninitiated tips. Conclusions: Different near-IR lasers present differences in lateral heat and tissue penetration, using initiated or noninitiated fibers, and due to these differences, power settings and irradiation period must be considered to avoid risks due to overheating.
Asunto(s)
Calor , Láseres de Semiconductores , Animales , Bovinos , Láseres de Semiconductores/uso terapéutico , TemperaturaRESUMEN
PURPOSE: To evaluate the accuracy of three torque-control devices used on healing abutments in implant prosthodontics. MATERIALS AND METHODS: In this in vitro experiment, three torque controllers, Ankylos friction-based, Straumann spring-based, and Anthogyr pre-calibrated torque control devices were used to tighten the healing abutments of Ankylos and Straumann dental implants to a pre-determined value of 15 Ncm. A digital torque meter (DT), Cedar DID-4A, was used to assess removal torque as a surrogate for the accuracy of the torque controllers to apply a tightening force of 15 Ncm on healing abutments. One-way analysis of variance (ANOVA) was used to identify differences between each torque controller and the digital torquemeter, a p < 0.05 was considered significant. RESULTS: The torque required to remove the healing abutments was 16.05 ± 0.66 Ncm for the Ankylos ratchet, 12.61 ± 0.90 Ncm for the Straumann ratchet, and 14.37 ± 1.08 Ncm for the Anthogyr torque-control device. Significant statistical differences were observed between Ankylos and the control digital torquemeter (p = 1.84E-8 ; F = 50.3); Anthogyr and control digital torquemeter (p = 0.01; F = 6.79); and Straumann and control digital torquemeter (p = 0.01; F = 141.15). CONCLUSION: Friction-based (Ankylos), spring-based (Straumann), and pre-calibrated (Anthogyr) torque control devices present over-torque and under-torque values when used over healing abutments of Ankylos and Straumann implant systems.
RESUMEN
BACKGROUND/OBJECTIVES: Several studies have shown a relationship between vitamin D and migraine, including the association between decreased serum 25-hydroxyvitamin D in patients with migraine and the positive effects of vitamin D supplementations in the therapy of this disease. Two single-nucleotide variants (SNVs) vitamin D receptor (VDR) gene, VDR rs2228570, and VDR rs731236 have shown an association with migraine risk in a previous case-control association study, while an exome sequencing study identified a rare variant in GC vitamin D binding protein gene. This study aims to look for the association between several common variants in these two genes and the risk for migraine. METHODS: We genotyped 290 patients diagnosed with migraine and 300 age-matched controls using specific TaqMan assays for VDR rs2228570, VDR rs731236, VDR rs7975232, VDR rs739837, VDR rs78783628, GC rs7041, and GC rs4588 SNVs. RESULTS: We did not find an association between these SNVs and the risk for migraine. None of these SNVs were related to the positivity of a family history of migraine or with the presence of aura. The VDR rs731236A allele showed a significant association with the triggering of migraine attacks by ethanol (Pc = 0.007). CONCLUSIONS: In summary, the results of the current study suggest a lack of association between common SNVs in the VDR and GC gene and the risk of developing migraine. The possible relationship between VDR rs731236 and the triggering of migraine episodes with ethanol deserves future studies.
Asunto(s)
Polimorfismo de Nucleótido Simple , Receptores de Calcitriol , Humanos , Receptores de Calcitriol/genética , Vitamina D , Genotipo , EtanolRESUMEN
Three new species of Distoseptispora, viz. D. mengsongensis, D. nabanheensis, and D. sinensis, are described and illustrated from specimens collected on dead branches of unidentified plants in Yunnan Province, China. Phylogenetic analyses of LSU, ITS, and TEF1 sequence data, using maximum-likelihood (ML) and Bayesian inference (BI), reveal the taxonomic placement of D. mengsongensis, D. nabanheensis, and D. sinensis within Distoseptispora. Both morphological observations and molecular phylogenetic analyses supported D. mengsongensis, D. nabanheensis, and D. sinensis as three new taxa. To extend our knowledge of the diversity of Distoseptispora-like taxa, a list of recognized species of Distoseptispora with major morphological features, habitat, host, and locality is also provided.
RESUMEN
Saprobic hyphomycetes are highly diverse on plant debris. Over the course of our mycological surveys in southern China, three new Helminthosporium species, H. guanshanense sp. nov., H. jiulianshanense sp. nov. and H. meilingense sp. nov., collected on dead branches of unidentified plants, were introduced by morphological and molecular phylogenetic analyses. Multi-loci (ITS, LSU, SSU, RPB2 and TEF1) phylogenetic analyses were performed using maximum-likelihood and Bayesian inference to infer their taxonomic positions within Massarinaceae. Both molecular analyses and morphological data supported H. guanshanense, H. jiulianshanense and H. meilingense as three independent taxa within Helminthosporium. A list of accepted Helminthosporium species with major morphological features, host information, locality and sequence data was provided. This work expands our understanding of the diversity of Helminthosporium-like taxa in Jiangxi Province, China.
RESUMEN
(1) Background: Pulmonary endarterectomy (PEA) is the "gold standard" treatment for operable patients with chronic thromboembolic pulmonary hypertension (CTEPH). Persistent pulmonary hypertension (PH) after PEA confers a worse prognosis. Balloon pulmonary angioplasty (BPA) could represent a useful therapy in this setting, but evidence about its effectiveness and safety in patients with previous PEA is limited. (2) Methods: A total of 14 patients with persistent PH after PEA were treated with BPA in a single PH center. Hemodynamic and clinical effects of BPA and complications of the procedure were retrospectively collected. (3) Results: After BPA, the mean pulmonary arterial pressure fell from 50.7 ± 15.3 mmHg to 38.0 ± 7.9 mmHg (25.0% decrease; 95% confidence interval (CI) 14.0-35.5%; p = 0.01). Pulmonary vascular resistances were reduced from 8.5 ± 3.6 WU to 5.3 ± 2.2 WU (37.6% decrease; 95% CI 18.8-56.5%; p = 0.01). WHO functional class was also improved with BPA. Severe BPA-related complications were infrequent and no periprocedural deaths were observed. (4) Conclusions: BPA is an effective and safe therapy for patients with CTEPH and persistent PH after PEA.
RESUMEN
Several papers have been published suggesting a probable role of inflammatory factors in the etiopathogenesis of migraine. In this study, we investigated the possible association between common variants in the LAG3/CD4 genes (both genes, which are closely related, encode proteins involved in inflammatory and autoimmune responses) in the risk of migraine in a cohort of Caucasian Spanish participants. For this purpose, the frequencies of CD4 rs1922452, CD4 rs951818, and LAG3 rs870849 genotypes and allelic variants, using a specific TaqMan-based qPCR assay, were assessed in 290 patients diagnosed with migraine and in 300 healthy controls. The relationship of these variables with several clinical features of migraine was also analyzed. The frequencies of the analyzed LAG3/CD4 genotypes did not differ significantly between the two study groups and were not related to the sex, age at onset of migraine, family history of migraine, presence or absence of aura, or the triggering effect of ethanol on migraine episodes. These results suggest a lack of association between common variants in the LAG3/CD4 genes and the risk of developing migraine in the Caucasian Spanish population.
Asunto(s)
Antígenos CD4 , Predisposición Genética a la Enfermedad , Proteína del Gen 3 de Activación de Linfocitos , Trastornos Migrañosos , Humanos , Genotipo , Trastornos Migrañosos/genética , Polimorfismo de Nucleótido Simple , Factores de Riesgo , Antígenos CD4/genética , Proteína del Gen 3 de Activación de Linfocitos/genéticaRESUMEN
Plant debris are habitats favoring survival and multiplication of various microbial species. During continuing mycological surveys of saprobic microfungi from plant debris in Yunnan Province, China, several Corynespora-like and Dendryphiopsis-like isolates were collected from dead branches of unidentified perennial dicotyledonous plants. Four barcodes, i.e., ITS, LSU, SSU and tef1-α, were amplified and sequenced. Morphological studies and multigene phylogenetic analyses by maximum likelihood and Bayesian inference revealed three new Corynespora species (C. mengsongensis sp. nov., C. nabanheensis sp. nov. and C. yunnanensis sp. nov.) and a new Kirschsteiniothelia species (K. nabanheensis sp. nov.) within Dothideomycetes, Ascomycota. A list of identified and accepted species of Corynespora with major morphological features, host information and locality was compiled. This work improves the knowledge of species diversity of Corynespora and Kirschsteiniothelia in Yunnan Province, China.
RESUMEN
A straightforward, laser-assisted method of extracting the metal housings from an overdenture by using the visible (blue) light of a high-power dental diode laser is presented. This approach produced localized softening of the acrylic resin, allowing the metal housing to be dislodged without damage. This technique minimizes damage to the metal housings during removal, is rapid and conservative, and may help reduce patient costs.