RESUMEN
The spring-in phenomenon of the composite parts can affect the assembly process. This study aims to predict the spring-in phenomenon of a carbon fiber reinforced plastic (CFRP) part. Here, we predict the spring-in of the CFRP part using a coupled analysis of the forming and cooling processes during the stamping process. First, a simulation of the entire forming process, such as the transfer of the composite laminate, gravity analysis, and forming was performed to obtain the temperature distribution of the CFRP part. Subsequently, a finite-element (FE) simulation of the cooling process was conducted to predict the spring-in phenomenon of the shaped CFRP part using the temperature data obtained in the forming simulation. Finally, a CFRP part was manufactured and compared with the results of the FE simulation.
RESUMEN
The multi-stage roll die forming (RDF) process is a plastic forming process that can manufacture a transmission part with a complex shape, such as a drum clutch, by using a die set with rotational rolls. However, it is difficult to satisfy dimensional accuracy because of spring-back and unfilling. The purpose of this study is to design a multi-stage RDF process for the manufacturing of a drum clutch to improve dimensional accuracy using an artificial neural network (ANN). Finite element (FE) simulation of the multi-stage RDF process is performed to predict the dimensional accuracy according to various clearances for each stage. Moreover, the ANN is used to determine the relationship between the clearance and dimensional accuracy of the drum clutch to reduce the number of FE simulation. The results of the FE simulation and ANN are used to determine the optimal clearance for each stage of the RDF process. Finally, the drum clutch is fabricated using the determined conditions. The experimental results are in good agreement with the results of FE simulation from the aspect of outer diameter, inner diameter, thickness of outer tooth, thickness of inner tooth, and face thickness of tooth.
