Thermal desorption as a high removal remediation technique for soils contaminated with per- and polyfluoroalkyl substances (PFASs).

Soils contaminated with per- and polyfluoroalkyl substances (PFASs) are an important source for impacting drinking water delivery systems and surface water bodies world-wide, posing an urgent risk to human health and environmental quality. However, few treatment techniques have been tested for PFAS-contaminated soil hotspots. This study investigated the possibility of thermal desorption as a possible technique to remediate soils contaminated with multiple PFASs. Two fortified soils (∑9PFAS ≈ 4 mg kg-1) and one field-contaminated soil (∑9PFAS ≈ 0.025 mg kg-1) were subjected to a 75-min thermal treatment at temperatures ranging from 150 to 550°C. Soil concentrations of PFASs showed a significant decrease at 350°C, with the ∑9PFAS concentration decreasing by, on average, 43% and 79% in the fortified and field contaminated soils, respectively. At 450°C, >99% of PFASs were removed from the fortified soils, while at 550°C the fraction removed ranged between 71 and 99% for the field contaminated soil. In the field contaminated soil, PFAS classes with functional groups of sulfonates (PFSAs) and sulfonamides (FOSAs) showed higher removal than the perfluoroalkyl carboxylates (PFCAs). Thus thermal desorption has the potential to remove a wide variety of PFASs from soil, although more studies are needed to investigate the cost-effectiveness, creation of transformation products, and air-phase vacuum filtration techniques.

Stabilization of per- and polyfluoroalkyl substances (PFASs) with colloidal activated carbon (PlumeStop®) as a function of soil clay and organic matter content.

The global problem of contamination of drinking water sources and the aquatic environment with per- and polyfluoroalkyl substances (PFASs) originating from highly contaminated soils is addressed in this study. For the first time, a colloidal activated carbon (AC) product (PlumeStop®) was systematically assessed for PFASs stabilization in soil. Colloidal (particle size 0.1-1.1 µm) AC has the advantage that field application is non-intrusive, comprising injection under high pressure in situ at PFAS-contaminated soil hotspots. In the assessment, 10 different soil mixtures with gradually increasing organic carbon and clay fractions were spiked with 18 different PFASs of varying perfluorocarbon chain length and four different functional groups and aged for one year. Equilibrium leaching tests showed that the ability of colloidal AC to increase sorption of PFASs to soil was highly dependent on PFAS perfluorocarbon chain length. The best treatment efficiency was observed for perfluorocarbon chain lengths 6-7 at which colloidal AC resulted in sorption of 81%, 85%, and 86% for perfluorooctanoate (PFOA), 6:2 fluorotelomer sulfonate (6:2 FTSA) and perfluorohexane sulfonate, (PFHxS), respectively. Sorption of individual PFASs decreased significantly (p < 0.05) with increasing organic carbon content in soil treated with colloidal AC indicating stearic hindrance of the ACs pore structure. On the other hand, the sorption of the majority of PFASs increased significantly (p < 0.05) with increasing clay content in colloidal AC-treated soil, which can be explained by increase in surface area that colloidal AC can sorb to. Overall, the results indicate that the colloidal AC product tested can be useful in remediation approaches for certain PFASs under specific field conditions and PFAS contamination.